1+404-794-8110 / USA 800-366-9709
800-366-9709
Shop By

Filter

Use For
  1. Alfa (5)
  2. BLK (1)
  3. Edlund Can Openers (1)
  4. Electro Freeze (1)
  5. Electrolux (1)
  6. Globe (4)
  7. Hobart (3)
  8. Lejo (4)
  9. Lincoln (5)
  10. Middleby Marshall (1)
  11. Nemco (12)
  12. Nieco (1)
  13. Oliver Products (1)
  14. Prince Castle (7)
  15. Robot Coupe (5)
  16. Shaver Specialty (1)
  17. Silver King (2)
  18. Univex (3)
  19. Vita Mix (3)
  20. Vollrath (18)
  21. Waring (3)
  22. Where Part is Applicable (13)

Blades

Blades for meat slicers, prep equipment, can openers, blenders, wedgers, scrapers, food processors, choppers, grinders.

Items 81 to 95 of 95

Page:
  2. 1
  3. 2

Set Descending Direction
per page
  1. Knife, Slicing, 4 hole mount 11-3/4

    Knife, Slicing, 4 hole mount 11-3/4

    Part No. PD213031

    $361.81
    • Slicing Knife
    • Stainless Steel
    • Center hole 2.224" ID
    • 4 Screw Mounting Holes, 1/4"
    • 11-3/4" Diameter
    • Hard carbon steel
    • Commonly used on models such as Berkel, Intedge, Globe, Univex units where part is applicable.

  2. Knife, Stainless Steel 11-7/8

    Knife, Stainless Steel 11-7/8

    Part No. PD53085

    $736.84
    • Replacement Stainless Steel Knife
    • For meat slicers
    • 11-7/8 Diameter
    • May be used on Hobart 2612, 2712 and most 2000 series slicers

  3. Knife, Stainless Steel Hollow Ground

    Knife, Stainless Steel Hollow Ground

    Part No. PD29573

    $498.85
    • Knife, Stainless Steel Hollow Ground
    • Commonly used on models: 150, 260, 510, 610, 660, 710, 760, 810 (Ring)

  4. PLATE, SHREDDER 3/16" HOLE

    PLATE, SHREDDER 3/16" HOLE

    Part No. PD18039

    $58.80
    • Shredder Plate, 3/16"
    • #12 Hub
    • 9-1/4" Outer Diameter
    • 7/16" Inner Diameter
    • 8 Slotted holes around perimeter of disc.
    • Used on various power attachments with #12 hub.

  5. S Blade Smooth Edge (Not a counterfeit)

    S Blade Smooth Edge (Not a counterfeit)

    Part No. PD1099210

    $102.98
    • Authentic OEM S Blade by Robot Coupe
    • Longer lasting than counterfiets
    • Smooth straight edge 'S' shaped blade
    • Tip to Tip measurement is 7-1/4" 
    • Used on Various Robot Coupe Models Such As  R2 (Old Style), R2N (serial number series - R2xxxxx Also, 230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxx ), R2N Ultra, R2N-ULTRA, 247xxxxx03 and only where part is applicable.

  6. S BLADE, SMOOTH EDGE, HEX SHAFT *

    S BLADE, SMOOTH EDGE, HEX SHAFT *

    Part No. PD1947510

    $87.44
    • S Blade
    • 7" Width
    • 2 11/16" Depth
    • Smooth edge
    • Used on units with six sided HEX shaft.
    • Use with cutting bowl only
    • Used on various Robot Coupe models such as R172, R300, R301, R301 Ultra and only where part is applicable.
    • Not for R301 Series D or R301 Ultra Series D.
    • Not for Old Style model R-300

  7. S Knife with Disc Holder Plate, #12

    S Knife with Disc Holder Plate, #12

    Part No. PD213034

    $325.00
    • Knife holder with stainless steel S knife blade
    • Used on #12 hub attachments
    • Square drive
    • Used on Hobart and various manufacturer models

  8. S-Blade, Smooth

    S-Blade, Smooth

    Part No. PD1935810

    $111.72
    • Smooth S Blade
    • 7" Length
    • 2.5" Width
    • Outer Diameter1 13/16"
    • Plastic Hub
    • Stainless Steel Blade
    • Gray Hub
    • Commonly used on various Robot Coupe models such as R100, R100 PLUS, R100B, R100BCLR, R101, R101 Plus CB, R101B and only where part is applicable.

  9. SCALLOPED, 11-BLADE ASSEMBLY 1/4 INCH

    SCALLOPED, 11-BLADE ASSEMBLY 1/4 INCH

    Part No. PD26448

    $91.46
    • Commonly used on Lincolm models: Tomato Pro, 0644N, Econo Pro

  10. Scraper Blade

    Scraper Blade

    Part No. PD213006

    $15.18
    Scraper Blade

  11. Scraper Blade Only

    Scraper Blade Only

    Part No. PDG11032

    $32.22
    • Scraper Blade Only
    • Replacement blade
    • Used of item PD125848
    • Commonly Used on Models: 161, 161-PG, 173, MKG60, SG2460 

  12. Slicer Blade Set - 3 Pcs

    Slicer Blade Set - 3 Pcs

    Part No. PD213029

    $122.94
    • Slicer Blade
    • 3 Piece Set
    • Commonly used on Electrolux models: C1, C2, C3, C6, C8, C10, C14
    • (Previously Dito Dean)

  13. Slicing Knife

    Slicing Knife

    Part No. PD213030

    $339.39
    Slicing Knife

  14. TC-12-MG X BLADE

    TC-12-MG X BLADE

    Part No. PD45348

    $24.75
    • X knife
    • Commonly used on various Uniworld models such as TC-12-MG and where part is applicable.

  15. X Blade, Knife, Grinder Chopper, #12

    X Blade, Knife, Grinder Chopper, #12

    Part No. PD456701

    $44.34
    • Premium X Knife Blade
    • #12 chopper grinder knife
    • .472" square hole, 12MM x 12MM
    • Used on models where part is applicable:
      • American 6212
      • Berkel E-012
      • Biro 22
      • Blakeslee 12
      • Butcher Boy TCA12, TM12
      • Chop Rite 210
      • Enterprise 10, 2112, 2512, 2612, 2712
      • General Slicing D, H, P
      • Globe - Stimpson 56, 200, 212, F230, 612, 725, 4212, 4312, 4412, 4612, 5113
      • Hollymatic 1000
      • Intedge C3H, C2HA, CSH, C2HDS
      • Krefft R-70
      • Sanitary 100, 101, 600, S612, 900
      • Thunderbird 300E, TX600
      • Torrey M-12, M-12-FS
      • Univex MG8912

     

    Safety Tips:

    Tighten the End Ring hand tight only. Over tightening the ring is a common mistake.

    Always use the same knife and Plate together. Always use a new knife with a new plate. (call to review plate sizes)

    Do not operate the meat grinder without meat in it or without food safe lubricant. Apply on the plate surface.

Items 81 to 95 of 95

Page:
  2. 1
  3. 2

Set Descending Direction
per page
Commercial Kitchen Equipment Parts and Cleaning Stuff © Copyright 2021 SupplyDIRECT, Inc. All Rights Reserved. Atlanta, Georgia