1+404-794-8110 / USA 800-366-9709
800-366-9709
Shop By

Filter

Use For
  1. Alfa (5)
  2. BLK (1)
  3. Edlund Can Openers (1)
  4. Electro Freeze (1)
  5. Electrolux (1)
  6. Globe (4)
  7. Hobart (3)
  8. Lejo (4)
  9. Lincoln (5)
  10. Middleby Marshall (1)
  11. Nemco (12)
  12. Nieco (1)
  13. Oliver Products (1)
  14. Prince Castle (7)
  15. Robot Coupe (5)
  16. Shaver Specialty (1)
  17. Silver King (2)
  18. Univex (3)
  19. Vita Mix (3)
  20. Vollrath (18)
  21. Waring (3)
  22. Where Part is Applicable (13)

Blades

Blades for meat slicers, prep equipment, can openers, blenders, wedgers, scrapers, food processors, choppers, grinders.

Items 1 to 80 of 95

Page:
  1. 1
  2. 2

Set Descending Direction
per page
  1. Blade & Holder, Assembly 1/2"

    Blade & Holder, Assembly 1/2"

    Part No. PD213022

    $155.93
    • Blade & Holder Assembly
    • 10 Blades
    • Commonly used on Nemco models such as: 55450-1, 55450-2, 55450-3, 55450-4, 55450-5, 55450-6, 55650, N55500, N55500-1, N55500-2, N55500-3, N55550-6, N55550-8, N55600 and where part is applicable.

  2. 3/16" Perma-Tight Blade Cartridge

    3/16" Perma-Tight Blade Cartridge

    Part No. PD25293

    $187.25
    • Perma-Tight Blade Cartridge Assembly
    • 3/16"
    • 4-1/2" x 9-1/2" block
    • 12 blades
    • Ear on one corner
    • Use for Prince Castle models 910, 943, 943-A, 943-AH, 943-B, 943-BK, 943-C, 943-D and where part is applicable. 

  3. 6 Section Wedger Blade

    6 Section Wedger Blade

    Part No. PD41000

    $72.77
    • Blade Assembly
    • Stainless Steel
    • 6 Section
    • Commonly used on Nemco models such as: 55450-1, 55450-2, 55450-3, 55450-4, 55450-5, 55450-6, N55500, N55500-1, N55500-2, N55500-3, N55500-4, N55550, N55550-6 and where part is applicable.

  4. 8 Section Wedger Blade

    8 Section Wedger Blade

    Part No. PD41083

    $72.77
    • Blade assembly
    • 8 cut sectional
    • 3-3/16" diameter
    • 4-15/16" centers screws
    • 2 x 6-32 x 3/4" stainless steel round head
    • Commonly used on Nemco models such as: 55450-1, 55450-2, 55450-3, 55450-4, 55450-5, 55450-6, 55450-8, 55550-8, N55500, N55500-1, N55500-2, N55500-3, N55500-4, N55550, N55550-6, N55550-8, N55550-8C and where part is applicable.

  5. Bandsaw Blade, 63" 4T (4)

    Bandsaw Blade, 63" 4T (4)

    Part No. PD56332

    $21.60
    • Bandsaw Blade
    • 4 to a pack
    • Hardened steel teeth, true tempered for life.
    • Consistent tooth profile provides smooth cuts
    • Uniform welds are guaranteed against breakage
    • Factory tested
    • 4 teeth per inch
    • .022" x 5/8" size
    • 63"

  6. Blade

    Blade

    Part No. PD213003

    $61.80
    Blade

  7. Waring 826-1345 Blade

    Blade

    Part No. PD33081

    $37.64
    • Blade
    • Commonly used on Waring models such as 2610C, CAC72, CB10, CB10B, CB10BT, CB10CS, CB10CT, CB10D, CB10DB, CB10R, CB10S, CB10T, CB10TB, CB10TS, CB15, CB15DB, CB15S, CB15T, CB15TB, CB15TS, CBC10, CBC15, LBC10, LBC10C, LBC15 and where part is applicable

  8. Blade & Holder Assembly 3/8 "

    Blade & Holder Assembly 3/8 "

    Part No. PD50084

    $183.33
    • Blade & Holder Assembly
    • 3/8 " dicing grid
    • Used on various Nemco models such as N55500, 55450-1, 55450-2, 55450-3, 55450-4, 55450-5, 55450-6, N55500-1, N55500-2, N55500-3, N55500-4, and where part is applicable. 

  9. BLADE (1/4, ASSY)

    BLADE (1/4, ASSY)

    Part No. PD236684

    $59.67
    • Blade Assembly
    • 1/4"
    • 11 blades
    • 1/4" cut
    • 6mm cut
    • Used on Vollrath and Redco models such as EC0654, 0654, 654. Used on tomato slicer models such as Vollrath, Redco; 643N, 6435GN, 644N, 644SGN, 646N, 690SGN, 6915SGN, 694SGN. Econo Pros and Tomato Pros series where part is applicable.. 

  10. Blade Assembly

    Blade Assembly

    Part No. PD213018

    $61.43
    • Blade Assembly
    • 1/4" cut
    • 11 blades
    • 1-1/4" screw centers
    • 9-7/8" long
    • Straight edge
    • Commonly used on tomato slicers.

  11. BLADE ASSEMBLY 11 BLADES 1/4"

    BLADE ASSEMBLY 11 BLADES 1/4"

    Part No. PD10221.3

    $59.67
    • Has 11 blades
    • 11-11/16" OVERALL
    • 1/4"-20 X 1-1/2" CENTERS
    • Used on various Lincoln/Redco models such as: 0643N, 0643SGN, 0644N, 0644SGN, 0646N, ECONO PRO, TOMATO PRO, Tomato Pro and where part is applicable.

     

  12. Blade Assembly 3/16 Inch

    Blade Assembly 3/16 Inch

    Part No. PD213021

    $57.00
    Blade Assembly 3/16 Inch

  13. BLADE ASSEMBLY 3/16", ONION KING

    BLADE ASSEMBLY 3/16", ONION KING

    Part No. PD10124

    $151.15
    • Blade Assembly
    • Onion King
    • 3/16" slice
    • Lincoln Redco
    • 13 blade assembly
    • Used on various Lincoln models such as 500 Series, 500N, 501N, 501N Onion King, 502N, Onion King and where part is applicable.

  14. Blade Assembly 8 Section

    Blade Assembly 8 Section

    Part No. PD213017

    $109.33
    • Blade Assembly
    • 8 Section
    • Commonly used on Prince Castle models such as: 908-A, Core Bundle and where part is applicable.

  15. Blade Assembly Straight

    Blade Assembly Straight

    Part No. PD213025

    $66.05
    • Blade spacing 7/32"
    • 13 blade cartridge
    • Used on Tomato Pro and Econo Pro

  16. Blade Assembly, 1/2"

    Blade Assembly, 1/2"

    Part No. PD213011

    $121.21
    • Commonly used on models: INSTACUT 3.5, INSTACUT 3.5W

  17. Blade Assembly, 1/4"

    Blade Assembly, 1/4"

    Part No. PD213014

    $55.86
    • Blade Assembly
    • 1/4" Cut blade spacing
    • 10 blade assembly
    • 9-7/8" Long
    • Commonly used on Nemco Easy Tomato Slicer models such as: 55600-1, 55600-2, 55600-3, 55600-4, N55600 Series, and where part is applicable.

     

  18. Blade Assembly, 1/4" Slice

    Blade Assembly, 1/4" Slice

    Part No. PD17019.3

    $55.86
    • Blade Assembly
    • 1/4" cut
    • 11 Blades
    • 11-11/16" overall length
    • 1/4"-20 X 1-1/2" centers
    • Straight edge
    • Used on tomato slicers

  19. Blade Assembly, 1/4" Slice

    Blade Assembly, 1/4" Slice

    Part No. PD213019

    $89.10
    • Blade Assembly
    • 1/4" cut
    • 11 blades
    • 1-1/4" screw centers
    • 9-7/8" long
    • Straight edge
    • Commonly used on tomato slicer model E531, E530SGP.

  20. Blade Assembly, 1/4" Slice

    Blade Assembly, 1/4" Slice

    Part No. PD45858

    $55.86
    • Blade Assembly
    • 1/4" cut
    • 11 Blades
    • 11-11/16" overall length
    • 1/4"-20 x 1-1/2" centers
    • Straight edge
    • Commonly used on Lincoln Redco slicers such as 0643N, 0643SGN, 0644N, 0644SGN, 0646N,
      ECONO PRO, TOMATO PRO.

  21. Blade Assembly, 3/16"

    Blade Assembly, 3/16"

    Part No. PD213007

    $61.43
    • 3/16" Slice Blade Assembly
    • 15 blades 
    • 11-3/4" overall length
    • Straight edge
    • 1/4"-20 x 1-1/2" centers
    • Commonly used on tomato slicer.

  22. Blade Assembly, 3/16"

    Blade Assembly, 3/16"

    Part No. PD213012

    $97.24
    • 3/16" blade spacing
    • 16 blades in cartidge
    • Commonly used on models: INSTASLICE

  23. BLADE ASSEMBLY, 3/16" 15 BLADE SET

    BLADE ASSEMBLY, 3/16" 15 BLADE SET

    Part No. PD10048

    $91.46
    • Blade Assembly
    • 3/16" Cut
    • 15 Blades
    • 11-3/4" overall
    • 1/4"-20 x 1-1/2" centers
    • Scalloped
    • Commonly used on various Lincoln/Redco models such as: Tomato Pro, Econo Pro, 0643N, 0643SGN, 0644N, 0644SGN, 0646N and where part is applicable. 

     

  24. BLADE ASSEMBLY, 3/16" 15 BLADE SET

    BLADE ASSEMBLY, 3/16" 15 BLADE SET

    Part No. PD46176

    $81.63
    • Blade Assembly
    • 3/16" Cut
    • 15 Blades
    • 11-3/4" overall
    • 1/4"-20 x 1-1/2" centers
    • Scalloped
    • Commonly used on various Lincoln/Redco models such as: Tomato Pro, Econo Pro, 0643N, 0643SGN, 0644N, 0644SGN, 0646N and where part is applicable. 

     

  25. Blade Assembly, 3/8"

    Blade Assembly, 3/8"

    Part No. PD236685

    $52.74
    • Blade Assembly
    • 8 blades
    • 3/8" cut
    • 10mm cut
    • Used on Vollrath, Redco models such as EC0656, 656, 0656. Used on tomato slicer models such as Vollrath, Redco; 643N, 6435GN, 644N, 644SGN, 646N, 690SGN, 6915SGN, 694SGN. Econo Pros and Tomato Pros series where part is applicable..

  26. Blade Assembly, 7/32"

    Blade Assembly, 7/32"

    Part No. PD213035

    $86.11
    • 7/32" blade spacing
    • 13 blades in cartridge
    • Commonly used on models: InstaSlice

  27. BLADE ASSEMBLY, SCRAPER

    BLADE ASSEMBLY, SCRAPER

    Part No. PD128536

    $23.87
    • Scraper Blade Assembly
    • Use for Globe models 300, 400, 500, 720, 725, 770, 775, 820 & 825

  28. Blade Assembly, Tomato King

    Blade Assembly, Tomato King

    Part No. PD10049

    $95.00
    • Blade Assembly
    • 1/4" cut
    • 11 blades
    • 1-1/4" screw centers
    • 9-7/8" long
    • Straight edge
    • Commonly Used on Vollrath-Redco Tomato King model 044N.

  29. BLADE ASSEMLY 3/8", SQUARE FRAME

    BLADE ASSEMLY 3/8", SQUARE FRAME

    Part No. PD27082

    $146.25
    • Blade Set, 3/8"
    • 4-3/4" X 4-3/4"
    • 8 Top & 8 Bottom Blades
    • 81 EA 3/8" SQ Cuts
    • Commonly used on Prince Castle models such a : 910, 910-A and where part is applicable.

  30. BLADE ASSY (1/4 SCALLOPED)

    BLADE ASSY (1/4 SCALLOPED)

    Part No. PD236683

    $78.37
    • Blade Assembly
    • Scalloped
    • 1/4"
    • 11 Blades
    • 6mm
    • Used on tomato slicer models such as Vollrath, Redco; 643N, 6435GN, 644N, 644SGN, 646N, 690SGN, 6915SGN, 694SGN. Econo Pros and Tomato Pros series where part is applicable..

  31. BLADE ASSY (7/32, TOMATO PRO)

    BLADE ASSY (7/32, TOMATO PRO)

    Part No. PD236692

    $66.05
    • Blade Assembly
    • 13 blades
    • 7/32" cut
    • 5.5mm cut
    • commonly used on Vollrath/Redco models such as 643N, 643SGN, 644N, 644SGN, 645N, 645SGN, 690SGN, 691SGN, 694SGN.

  32. Blade Assy 10 Section

    Blade Assy 10 Section

    Part No. PD213023

    $84.33
    • Commonly used on models: 908-A

  33. BLADE ASSY 15 BLADES 3/16" Cut

    BLADE ASSY 15 BLADES 3/16" Cut

    Part No. PD33989.37

    $61.43
    • Blade Assembly Kit
    • 3/16" Cut
    • 1-1/4" screw centers
    • 9-7/8" long
    • 15 blades
    • Non-scalloped
    • TK-11
    • Use in Redo Tomato King and Nemco Tomato slicer

  34. BLADE ASSY 3/16", 15 BLADES

    BLADE ASSY 3/16", 15 BLADES

    Part No. PD10220

    $55.86
    • Blade Assembly
    • 3/16"
    • 15 blades
    • Straight edge blades
    •  Used on Various Lincoln/Redco models such as: 0643N, 0643SGN, 0644N, 0644SGN, 0646N, ECONO PRO, HFC-24, HFC-36, TOMATO PRO 0644N and where part is applicable.

     

  35. Blade Assy 7/32"

    Blade Assy 7/32"

    Part No. PD213004

    $181.44
    • Blade Assy 7/32"
    • Commonly used on Prince Castle models such as: 910, 943, 943-A, 943-B, 943-BK, 943-BMC, 943-C, 943-D, 943-DH, 943-DMC and where part is applicable.

  36. Blade Assy Scalloped

    Blade Assy Scalloped

    Part No. PD213026

    $87.13
    • 3/32 blade spacing
    • 13 blades
    • Used on Lincoln Redco models Tomato Pro, Econo Pro

  37. BLADE ONLY

    BLADE ONLY

    Part No. PD129337

    $30.66
    • Blade only
    • Use for 31BL67, 31BL79, 32BL39, 32BL99, 33BL10, 33BL12, 33BL13, 33BL34, 34BL22, 34BL23, 37BL27, 37BL28, 91-215

  38. BLADE SCRAPER

    BLADE SCRAPER

    Part No. PD14989.5

    $11.08
    • Blade Scraper
    • 3/4" X 1-3/4"
    • White
    • Has 20 degree bend with 2 each key hole slots
    • Commonly used on various Univex models such as 6509, 7510, 7512, 8510, 8512 and only where part is applicable.
    • Please verify serial number when ordering. If the words Boston, Boston by Univex appear any where on the slicer this part will not fit.

  39. Blade Ser 1/4 Inch

    Blade Ser 1/4 Inch

    Part No. PD126329

    $181.44
    • 1/4" Perma-Tight Blade Cartridge
    • Commonly used on Prince Castle models such as: 910, 943, 943-A, 943-B, 943-BH, 943-BK, 943-BMC, 943-C, 943-D, 943-DMC and where part is applicable.

  40. BLADE SET ONLY, 8 SECTION

    BLADE SET ONLY, 8 SECTION

    Part No. KS105216

    $55.17
    • Wedgemaster® Wedger
    • 8-Section Blade Assembly Only
    • 1 ea.
    • 3-3/16" diameter
    • Experience superior portion control of lemons, limes, tomatoes, pickles and potatoes
    • Creates consistent, professional-looking cuts and designs, while decreasing labor costs and food waste
    • Used on Lincoln model 808N
    • Plunger sold separately
    • Commonly used on models COREMASTER, GREAT WEDGER, REDI WEDGE, WEDGEMASTER

  41. BLADE TYPE A

    BLADE TYPE A

    Part No. PD50707

    $7.32
    • Standard Slice
    • Bread Slicer Blade
    • Sold by the each
    • Commonly used on Oliver models 709, 711, 730, 732-N, 777-N, 777N, 797-32, 797-32C, 797-32N, 797-32NC, 797-48, 797-48N  and where part is applicable.

    Note: Factory strongly recommends replacing all 32 blades at the same time in order to maintain an even cut.

  42. Blade, Scalloped 1/4" Assembly

    Blade, Scalloped 1/4" Assembly

    Part No. PD213013

    $88.66
    • Scalloped Blade Assembly
    • 1/4" blade spacing cut 
    • 12 blade cartridge
    • 4-3/4" x 9"
    • 2 rods
    • Commonly used on Lincoln Redco models: INSTASLICE, TOMATOR SLICER; 15000, 15102, 15103, 15104, 15105.

  43. BLADE, 1/4 DICE ASSEMBLY ONLY

    BLADE, 1/4 DICE ASSEMBLY ONLY

    Part No. PD213010

    $118.41
    • Blade Assembly
    • 1/4"
    • 4-1/4" Square
    • 11 Upper and 11 lower blades
    • Commonly used on various Vollrath, Redco, models such as: 15000, 15005, 15006, Instacut 3.5, Instacut 3.5W and where part is applicable.

     

  44. Blade, 1/4" Slice

    Blade, 1/4" Slice

    Part No. PD213008

    $61.43
    • Blade Assembly
    • 1/4" cut
    • 11 Blades
    • 11-11/16" overall length
    • 1/4"-20 X 1-1/2" centers
    • Straight edge
    • Used on tomato slicer

  45. Blade, 3/16" Slice, Assembly

    Blade, 3/16" Slice, Assembly

    Part No. PD17013

    $99.00
    • 3/16" Slice Blade Assembly
    • 15 blades 
    • 11-3/4" overall length
    • Straight edge
    • 1/4"-20 x 1-1/2" centers
    • Commonly Used on Models: E530, E530SGP 

  46. BLADE, EASY TOMATO SLICER ASSEMBLY 3/16"

    BLADE, EASY TOMATO SLICER ASSEMBLY 3/16"

    Part No. PD25534.1

    $61.43
    • BLADE ASSEMBLY
    • 3/16" slice
    • Has 13 stainless steel blades
    • Blade length 9-7/8"
    • Commonly used on Nemco models such as: 55600-1, 55600-2, 55600-3, 55600-7, 55650, N55600 and where part is applicable.

  47. BLADE, LONG 3/8"

    BLADE, LONG 3/8"

    Part No. PD31852

    $24.19
    • Blades
    • 28-7 B 3/8"
    • 12 Pack

  48. Blade, S, Fine Serrated

    Blade, S, Fine Serrated

    Part No. PD39212

    $164.18
    • S Blade
    • Fine serrated
    • Used on units with SIX side shaft.
    • Use with cutting bowl only
    • Used on various Robot Coupe models, such as: R300, R301, R301 Ultra and where part is applicable.

    NOTE: Not for R301 Series D or R301 Ultra Series D.

  49. Blade, S, Serrated WFP

    Blade, S, Serrated WFP

    Part No. PD53197

    $210.14
    • S Blade
    • Plastic with stainless steel blades
    • Serrated
    • 5.4 x 6.8 x 4.15
    • Used on various Waring models such as WFP14S, WFP14SC, WFP14SK, WFP14SCK, WFP14SW.

  50. BLADE, S-BLADE, FINE SERRATED

    BLADE, S-BLADE, FINE SERRATED

    Part No. PD38362

    $347.80
    • S Blade
    • Fine serrated
    • Used on various Robot Coupe models such as Blixer 5V and where part is applicable. 

  51. Blade, Shaving Kit

    Blade, Shaving Kit

    Part No. PD213028

    $112.61
    Blade, Shaving Kit

  52. Blade, Slicer 13" 4-Hole Chrome STL

    Blade, Slicer 13" 4-Hole Chrome STL

    Part No. PD34099

    $232.20
    • Blade, Slicer
    • Hard Chrome
    • 13 Inches Diameter
    • 4 Mounting Holes
    • Commonly Used on various Bizerba models such as G13, SE355, SE12, SE128, A330FB, A330, A400, A404,1194, SE8, SE12, SG8D, VS8, VS8D, VS8F, VS8A, VS12 and where part is applicable.

  53. BLADE, SLICING (3/16", ASSY)

    BLADE, SLICING (3/16", ASSY)

    Part No. PD236697

    $59.67
    • Blade Assembly
    • 3/16"
    • 15 blades
    • Straight edge blades
    •  Used on Various Lincoln/Redco/Vollrath models such as: 0643N, 0643SGN, 0644N, 0644SGN, 0646N, ECONO PRO, HFC-24, HFC-36, TOMATO PRO 0644N and where part is applicable.

     

  54. BLADE, STRIPPER

    BLADE, STRIPPER

    Part No. PD129962

    $679.23
    • Stripper Blade
    • Use for Single Belt Units Only- Gas Models: 940, 960, 962; Series: 300, 400, 500, 600, 800

  55. Blade, Wet

    Blade, Wet

    Part No. PD213024

    $113.72
    • Blade assembly
    • Commonly used on models: 1002, 1230, 5006, 5012, 5057, 56500-2, Bar Boss 5039, Vita-Mix, VITA-MIX, VM0100, VM0100A, Total Nutrition Centers, Vita-Prep, TurboBlend 4500, TurboBlend 2 Speed Blender Model 1782 where part is applicable.

  56. Blades, Knife - Utility

    Blades, Knife - Utility

    Part No. PD213027

    $11.99
    Blades, Knife - Utility

  57. BLADES, SHORT 3/8"

    BLADES, SHORT 3/8"

    Part No. PD31853

    $21.94
    • Short Blades
    • 28-7 A 3/8"
    • 12 Pack

  58. Bladeset, 3/8" Boxed

    Bladeset, 3/8" Boxed

    Part No. PD45850

    $61.43
    • Blade Set Assembly
    • 3/8"
    • Tomato slice
    • Commonly used on Nemco models such as: 55600-1, 55600-2, 55600-3, 55600-7, N55600 and where part is applicable.

  59. CUTTER BLADE & HOLDER ASSY (1/4 CUT)

    CUTTER BLADE & HOLDER ASSY (1/4 CUT)

    Part No. PD235541

    $162.45
    • Cutter Assembly
    • Blade and Holder
    • Potato cutter
    • 1/4" cut
    • 6mm cut
    • 20 blades
    • Shaver Specialty
    • Keen Kutter

  60. Easy Tomato Slicer Blade Assembly, 1/4"

    Easy Tomato Slicer Blade Assembly, 1/4"

    Part No. KS105199

    $61.43
    • 1/4" Blade Assembly
    • 10 stainless steel blades
    • Blade length 9-7/8"
    • Heavy-duty cast aluminum and stainless steel construction for commercial use
    • Razor sharp stainless steel blades cut with trouble-free precision
    • NSF
    • Commonly used on Nemco models such as: 55600-1, 55600-2, 55600-3, 55600-7, 55650, N55600 and where part is applicable.

  61. GLOVE, SLICER SAFETY - LARGE

    GLOVE, SLICER SAFETY - LARGE

    Part No. PD125812

    $51.60
    • Slicer Glove, Large Glove
    • Sold Individually
    • Fits Right or Left and
    • Cut Resistant
    • Washable

  62. GLOVE, SLICER SAFETY - MEDIUM

    GLOVE, SLICER SAFETY - MEDIUM

    Part No. PD125811

    $51.60
    • Slicer Glove, Medium Glove
    • Sold Individually
    • Fits Right or Left and
    • Cut Resistant
    • Washable

  63. GLOVE, SLICER SAFETY - SMALL

    GLOVE, SLICER SAFETY - SMALL

    Part No. PD125810

    $51.60
    • Slicer Glove, Small Glove
    • Sold Individually
    • Fits Right or Left Hand
    • Cut Resistant
    • Washable

  64. HARD CHEESE GRATING DISK, SS

    HARD CHEESE GRATING DISK, SS

    Part No. PD42873

    $67.20
    • Grating disc
    • Stainless steel
    • Hard cheese, bread crumb, nuts. hard vegetables, spices
    • Used with grater attachment for a #12 or #22 Hub.
    • Made in Germany
    • 9-1/4" diameter
    • Commonly used on Alfa model: VS88H and where applicable on other models.

  65. Ice Blade Assembly

    Ice Blade Assembly

    Part No. PD213009

    $109.36
    • Blade assembly
    • Commonly used on models: 1002, 1230, 5006, 5012, 5057, Bar Boss 5039, Vita-Mix, VITA-MIX, VM0100, VM0100A, Total Nutrition Centers, Vita-Prep, TurboBlend 4500, TurboBlend 2 Speed Blender Model 1782 where part is applicable.

  66. Kitchenstuff test Product

    Kitchenstuff test Product

    Part No. k123456

    $1.00
    Kitchenstuff test Product

  67. Knife Assembly - Upper

    Knife Assembly - Upper

    Part No. PD213036

    $296.39
    • Knife Assembly Upper
    • Stainless Steel
    • 8 Straight Blades
    • Length: 11-1/2", 292 mm
    • Width: 11-1/2", 292 mm
    • Thickness: 1/2", 13 mm
    • Commonly used on Silver King models such as: SK2SB, SKK2 and where part is applicable.

  68. KNIFE BLADE, #2

    KNIFE BLADE, #2

    Part No. PD18136.5

    $25.20
    • Knife
    • Length 1-5/8"
    • Width 5/8"
    • Center of hole to center of hole is 7/16"
    • Commonly ssed on Edlund models: #2, 2S

  69. KNIFE BLADE, KMS-13

    KNIFE BLADE, KMS-13

    Part No. PD48443

    $539.54
    • Knife Blade
    • Used on various Pro-Cut models such KMS-13 and where part is applicable.

  70. KNIFE CHOPPER, X KNIFE, #12

    KNIFE CHOPPER, X KNIFE, #12

    Part No. PD41857

    $44.34
    • Chopper X Knife
    • For #12 attachment
    • .472" SQ. HOLE
    • HOLE SIZE: 12MM X 12MM
    • STEEL
    • TYPE-4 BLADES
    • Used on various Blakeslee models such as B-12, DD40 ,DD-60, DD-80, W-12, W-20 and only where part is applicable.

  71. KNIFE CHOPPER, X KNIFE, #12

    KNIFE CHOPPER, X KNIFE, #12

    Part No. PD213039

    $44.34
    • Chopper X Knife
    • For #12 attachment
    • .472" SQ. HOLE
    • HOLE SIZE: 12MM X 12MM
    • STEEL
    • TYPE-4 BLADES
    • Used on various Middleby Marshall models and only where part is applicable.

  72. Knife Slicing - Set

    Knife Slicing - Set

    Part No. PD213038

    $124.40
    Knife Slicing - Set

  73. Knife, "S" #22

    Knife, "S" #22

    Part No. PD213033

    $493.86
    Knife, "S" - #22

  74. Knife, #22 Hub

    Knife, #22 Hub

    Part No. PD51288

    $68.00
    • Knife #22
    • #22 Hub
    • 2-7/8" Width
    • 1/2" Inner Diameter Center Square
    • Commonly used on various Univex models such as MG22, 22HCCA and where part is applicable.

  75. Knife, Assembly Lower

    Knife, Assembly Lower

    Part No. PD213016

    $274.05
    • Lower Blade assembly
    • 11-1/2" Length
    • 11-1/2" Width
    • 1/2" Thickness
    • Includes (8) straight blades,
    • Commonly used on various Silver King models such as: SKK-1, SKK-2, SKK2, SK2SB, and where part is applicable.

  76. Knife, Grinder Chopper, #12

    Knife, Grinder Chopper, #12

    Part No. PD38545

    $44.34
    • 'X' Knife
    • #12 chopper grinder knife
    • Used on some Biro, Blakeslee, Hobart, Middleby Marshall and Vulcan models
    • Use for Vulcan models such as 56, 200, F230, 612, 725, 4212, 4312, 4412, 4612, 4812, 5113, 622, 4322, 4722, 4822, 4145, 4146, 4245, 4246, 4332, 4342, 4346, 4531, 4532, 4542, 4632, 4732, 5425, MC-46

  77. KNIFE, GUARD - CENTER PLATE

    KNIFE, GUARD - CENTER PLATE

    Part No. PD128542

    $657.02
    • Center Plate Knife Guard
    • Stainless Steel
    • Use for Globe models such as 300, 400, 500, 720, 725, 770, 775, 820, 825, 850L, 875L.
    • NOT FOR "LR" MODELS, call us if you have an LR model. 800-366-9709

  78. KNIFE, H.C., 11-3/4"

    KNIFE, H.C., 11-3/4"

    Part No. PD29502

    $311.02
    • Slicer Blade
    • 11-3/4" diameter
    • Center hole 2.224" Inner Diameter
    • 4 Screw,Mounting Holes, 1/4"
    • Hard carbon
    • Used on various Univex models such as 6512, 7510, 8512 after 08/2000, 9512 and only where part is applicable.

  79. KNIFE, SLICER - S/S

    KNIFE, SLICER - S/S

    Part No. PD128979

    $1,257.52
    • Knife Blade
    • Stainless Steel
    • 11-3/4" diameter
    • Commonly used on various Hobart models such as: 1612, 1712, 1712E & 1712R, 2612, 2712, 2812, 2912 and where part is applicable 

    Must provide model, serial number and ML # at checkout to confirm accuracy of part.

    If information not provided, then the part is Non-Returnable.

  80. KNIFE, SLICER, HARD CARBON STEEL

    KNIFE, SLICER, HARD CARBON STEEL

    Part No. PD190367

    $399.89
    • Slicer Knife Blade
    • 11-1/2" diameter
    • 3 holes
    • Hard carbon steel
    • Commonly used on Globe models: 3600, 3850, 3975, 4600, 4975 and where applicable.

Items 1 to 80 of 95

Page:
  1. 1
  2. 2

Set Descending Direction
per page
Commercial Kitchen Equipment Parts and Cleaning Stuff © Copyright 2021 SupplyDIRECT, Inc. All Rights Reserved. Atlanta, Georgia