Lights, Vapor Proof
-
VAPORPROOF FIXTURE W/GLOBE & WIRE GUARD
Part No. PD23020
$89.42- Canopy light fixture
- 120 volts
- 5-7/8" Height
- 3-7/8 OD
- Silicone Coated Globe
- Wire Guard
-
-
SAFETY SHIELD, 48", 1-1/2" DIA.
Part No. PD23008
$24.21- Safety Shield
- Protective shield for fluorescent tubes
- 48"
- Use for 1-1/2" (38 mm) diameter T-12 bulbs
- Shatterproof
- Can be easily cut with a knife.
-
REFRIGERATOR LIGHT FIXTURE
Part No. PD170641
$38.24- Fixture, Refrigerator Light
- 3-3/8" Diameter
- Screw Holes, 2-1/4" center to center
- Housing, die cast aluminum
- Satin finish
- Globe, Impact resistant clear polycarbonate
- Socket, Snap-in style porcelain with wire leads
- Rated for 40W appliance lamp
- 120/240V
-
OVERHEAD LIGHT ASSEMBLY, 4' W/LED LIGHTS
Part No. PD47495
$477.40- Overhead lighting
- 120V
- LED lighting
- Four feet in length
- Used in Walk-in Cooler/Freezers.
-
LIGHT, VAPOR PROOF W/GUARD, GLOBE
Part No. PD125424
$57.62- Glass globe and wire guard
- Vapor Proof Lights do not come with light bulbs.
- Mounting screw holes 5-1/8 centers
- Screw Holes 5-16" Diameter
- 1/2 NPT
-
-
LIGHT FIXTURE, VAPOR PROOF
Part No. PD56677
$63.10- Round Light Fixture
- Plastic coated globe, thermal and shock resistant
- Meets all requirements for N.F.P.A and N.E.C.410
- Coated shatter resistant glass globe
- Wire leads
- 5-1/2" Diameter
- Fits 3-1/2 or 4" junction boxes
- Commonly used in exhaust hoods
- NSF approved
- Made by either Kason or Component Hardware
-
LIGHT COVER 4 FOOT
Part No. PD36315
$399.70- Lens Cover (old style)
- Fluorescent Light Shield
- 49-5/8" length
- 6-1/4" wide
- Depth 2"
- Diamond Textured
- Plastic
- 6 clips needed per cover
- Use in walk-ins and food prep areas.
Non returnable
-
Light Bulb, 75 Watt
Part No. PD43066
$16.59- Lamp
- Rough service, HD
- Safe Shield
- 130V
- 75W
- Medium screw on base type
- Commonly used in walk-in coolers/freezers, exhaust hoods and where part is applicable
- Not for oven use
-
Light Bulb, 100 Watt
Part No. PD43065
$16.14- Lamp
- Rough service, HD
- 125/130V
- 100W
- Medium screw on base type
- Silicone coating
- Commonly used in walk-in coolers/freezers. exhaust hoods and where part is applicable
- Not for oven use
-
LIGHT BULB COVER
Part No. PD12838
$33.29- Light Bulb Cover
- Screw hole centers 3-1/2"
- Height 2-1/2"
- 3" mounting plate top to bottom
- Plastic
-
LAMP SOCKET, BI-PIN FOR T-8
Part No. PD34109.44
$14.23- Lamp Socket
- 600VAC
- 660W
- Use for T-8 fluorescent bulb
- Rapid start
-
GLOBE, WALK-IN, LIGHT COVER TEMPERED
Part No. PD23018
$31.05- Globe Light Cover
- Use for walk-in cooler freezer.
- Tempered glass
- 6-1/2" x 3-1/4"
- Screw in style base
-
GLOBE, PLASTIC COATED GLASS, REF
Part No. PD125430
$31.06- Plastic Coated Glass Globe Only
- 3-1/4" diameter x 6-3/4" long
- Use for refrigeration use only.
- Not for use in kitchen exhaust hood applications.
-
Flourescent Light Fixture 48"
Part No. PD45985
$217.35- Fluorescent Light Fixture, Safety Shield
- Economical Low Profile Cooler/Freezer Light Fixture.
- Energy efficient high power factor reduce operating costs and power consumption and generate less heat.
- Universal ballasts operate at -4ºF (-20ºC) for freezer applications.
- Resilient, one piece silicone gasket rated IP-65 for damp and wet locations.
- Highly polished German alanod reflector improves light output.
- Use in walk-in and food prep areas.
- 48" housing
- Uses 2 lamps (not provided)
- UNV=120-277V
- 50-60HZ
- Provided with Stainless Steel hardware and European type PG-16 conduit connector
-
Flourescent Light Fixture 48"
Part No. PD46242
$303.75- Fluorescent Light Fixture
- Vapor proof
- 49-7/8 x 6-3/8 x 4-1/4"
- Shatterproof Poly Safety Shield
- Energy efficient high power factor reduce operating costs and power consumption and generate less heat.
- Universal ballasts operate at -4ºF (-20ºC) for freezer applications.
- 48" housing
- Uses 2 lamps (not provided)
- 50-60HZ
- Use in walk-in and food prep areas.
- For coolers and freezers down to -20 degrees F
-
Flourescent Light Cover 48"
Part No. PD4594
$178.00- Diffuser Lens Cover, old style
- Fluorescent Light Shield
- 49-5/8" length
- 6-1/4" wide
- Depth 2"
- Diamond Textured
- Plastic
- 6 clips needed per cover
- Use in walk-ins and food prep areas.
Non returnable
-
Fixture, Light Vapor Proof
Part No. PD61137
$62.42- Light Fixture, Walk-In
- 120V
- 100 Watt A19 Bulb, (not included)
- Surface mounted
- Porcelain socket
- Gasket: Composition fiber and cork
- Globe: Clear Glass
- Coated (NSF listted)
- 4-1/4" diameter junction box
- 9-1/4" overall length
- Conduit electrical entry 1/2" NPS on four sides and one on top
- Suitable for damp locations.
- Commonly used on walk-in coolers and freezers where part is applicable
-
-
END CAP PLUGS
Part No. PD25904
$5.67- End Cap for Light Safety Shield
- Plastic
- Shields are used to cover fluorescent light bulbs.
- Fits shields for 1-1/2" O.D. lamp
- For Walk-Ins and food prep areas.
-
Eccentric Housing with Bearings
Part No. PD211741
$124.25- Comes with Bearings, Gasket & Brass Tube.
- Designed for the #PD137413 juicer.
-
CENTER MULLION LENS FILTER
Part No. PD52533
$8.92- Please verify model and Job Listing number when ordering
- Commonly used on Anthony models
-
-
60 INCH BRIDGE LENS CENTER
Part No. PD52535
$76.87- Please verify model and Job Listing number when ordering
- Commonly used on Anthony models
-
60 INCH BRIDGE LENS
Part No. PD52534
$74.91- Please verify model and Job Listing number when ordering
- Commonly used on Anthony models