Turbo Chef

68 Part(s)

Set Descending Direction
per page
  1. 2 POLE RELAY

    Part No. PD35655

    $55.14
    • Relay, 2 pole
    • 24VDC
    • 8) 1/4" Tab Term
    • Used in various Turbochef models such as C3D, DWO, ENCORE, ENCORE_2, G5, HHB, HHB 2, HHB2, NGC, NGC-2019, NGC2, NGO, NGO/Sota, Sota, TORNADO, TORNADO 2, i1-Sota, i3, i5 and where part is applicable
  2. Bearing 1/2", Shaft

    Part No. PD56015

    $25.70
    • Bearing
    • 1/2"
    • Use for shaft
    • Commonly used on Turbo Chef model HHC2020 and where applicable.
  3. BLOWER MOTOR, KIT

    Part No. PD48309

    $1,078.04
    • Blower Motor Kit
    • W/ Motor and Blower Wheel
    • CW
    • Used on various TurboChef models such as NGO/Sota, i1-Sota and where applicable.
  4. BLOWER MOTOR, TOP

    Part No. PD48401

    $1,078.04
    • Blower Motor
    • Stainless Steel
    • Used on various TurboChef models such as NGO/Sota, i1-Sota and where part is applicable.
  5. CAPACITOR HIGH VOLTAGE

    Part No. PD48468

    $64.43
    • Capacitor
    • 2,500 V AC
    • 1/4" Tab terminals
    • 50/60HZ
    • 0.91UF+0.19UF
    • Used on various TurboChef models such as Bullet, Encore, Encore 2, i3, i5 ,NGC, NGC2, NGO/Sota and only where part is applicable.
  6. Chain, Conveyor Drive 32 X 52 Link

    Part No. PD54283

    $20.23
    • Conveyor Drive Chain
    • Includes Master Link
    • #35 chain, 52 link
    • Used on various Turbo Chef models such as HHC-2020, HHC-2620 where part is applicable.
  7. CLIP, FILTER

    Part No. PD40921

    $24.57
    • Used on HHB models
  8. Complete Conveyor, Split 50/50

    Part No. PD54229

    $3,386.66
    • Complete Conveyor Service Kit
    • Includes frame and belt complete
    • Split belt 50/50
    • Used on various Turbo Chef models such as HHC-2020 and where part is applicable.
  9. Control Board

    Part No. PD53335

    $494.09
    • Control Board
    • SOTA
    • Used on various Turbochef Models such as NGO and where part is applicable
  10. Control Board

    Part No. PD53395

    $494.09
    • Control Board for STARBUCKS OVENS ONLY
    • SOTA
    • Used on various Turbochef Models such as NGO and where part is applicable
  11. Control Board

    Part No. PD47372

    $494.09
    • Control Board
    • SOTA
    • Used on various Turbochef Models such as NGO and where part is applicable
  12. Conveyor Belt 20" W x 95"

    Part No. PD59887

    $709.34
    • Conveyor Belt
    • Stainless steel
    • 20 w
    • 95" x 20 "
    • Commonly used on Turbochef equipment where applicable.
  13. Conveyor Belt 95" (50% of complete belt)

    Part No. PD54042

    $827.88
    • Conveyor Belt
    • Oven takes two belts 
    • 95"L X 9.5"W X 3/8"H
    • Used on various Turbo Chef models such as HHC-2020 and only where part is applicable.
  14. COVER WAVEGUIDE NGO/ENC

    Part No. PD47403

    $59.58
    • Waveguide Cover
    • Used on Turbo Chef models such as NGO, ENC and where part is applicable.
  15. Cover, Bottom Front

    Part No. PD66129

    $190.88
    • Commonly used on Turbo Chef models such as NGC and NGC2 and where part is applicable
  16. DIODE, HIGH VOLTAGE

    Part No. PD35654

    $32.32
    • High Voltage Diode
    • Two 1/4" Tab Terminal
    • Used on Turbo Chef models such as Bullet, Encore, Encore 2, G5, NGC, NGC-2019, NGC2, NGO/Sota, i1-Sota, i3, i5 and where part is applicable.
  17. DOOR GASKET

    Part No. PD50663

    $59.15
    • Commonly used on Turbo Chef models: HHB
  18. DOOR GASKET, 21-1/2" x 31"

    Part No. PD45099

    $73.95
    • Gasket
    • 21.5" x 31"
    • Commonly used on various Turbo Air models such as TBB-3SB and where part is applicable.
  19. DOOR GASKET, PINNED

    Part No. PD54913

    $46.31
    • Door gasket
    • 24 Mounting Pins
    • Black
    • Used on various TurboChef models such as HHB and where part is applicable.
  20. DOOR HINGE, SERVICE KIT, ENCORE LH

    Part No. PD110978

    $171.89
    • Door Hinge
    • LEFT SIDE
    • STAINLESS STEEL
    • Used on various Turbochef models such as ENCORE and only where part is applicable
  21. DOOR HINGE, SERVICE KIT, ENCORE RH

    Part No. PD110991

    $156.32
    • Door Hinge
    • RIGHT SIDE
    • STAINLESS STEEL
    • Used on various Turbochef models such as ENCORE and only where part is applicable
  22. Door Shunt Plate Service Kit

    Part No. PD48432

    $305.36
    • Service Door Kit
    • W/ Screw and Plugs
    • Used on various Turbochef models such as NGC, NGC-2019, NGC2 and where part is applicable.
  23. DOOR SPRING KIT

    Part No. PD48433

    $44.14
    • Door Spring Kit
    • W/ Springs and Hooks
    • Used on various Turbochef models where part is applicable.
  24. DRIVE BELT

    Part No. PD172690

    $11.25
    DRIVE BELT
  25. EMI FILTER

    Part No. PD172941

    $567.60
    EMI FILTER
  26. FILTER, AIR

    Part No. PD47525

    $25.90

     

  27. FILTER, GREASE, HHB

    Part No. PD40922

    $19.85
    • Use on HHB models
  28. FOIL PACK

    Part No. PD48475

    $160.05

     

  29. FRONT WAVEGUIDE WITH GASKET, SERVICE KIT

    Part No. PD41655

    $287.45
    FRONT WAVEGUIDE WITH GASKET, SERVICE KIT
  30. FUSE 12A

    Part No. PD48310

    $33.69
    • Fuse
    • 12A
    • 600VAC
    • Used on various TurboChef models such as
      C3/AB, C3/C, C3/CMulti ED, C3/CMulti EW, C3/CMulti UK, C3/D, C3/D ED, C3/D EW, C3/D UK, C3Multi, Encore, Encore 2, HHB, HHB2, NGC, NGC-2019, NGC2, NGO/Sota, i1-Sota, i3, i5 and where part is applicable.
  31. FUSE 20A

    Part No. PD48311

    $37.98
    • Fuse
    • 20A
    • 600VAC
    • Used on various TurboChef models such as Encore, Encore 2, Fire, G5, HHC-1618, HHC-2020, HHC-2620, HHC-3240, NGC, NGC-2019, NGC2, NGO/Sota, i1-Sota, i3, i5 and where part is applicable.
  32. HANDLE,ALUM,BLK.POWER COAT

    Part No. PD173561

    $64.44
    HANDLE,ALUM,BLK.POWER COAT
  33. HEATER ELEMENT

    Part No. PD48454

    $92.22
    • Heater Element
    • Used on various Turbochef models such as NGO/SOTA and where part is applicable.
  34. Heating Element, 208V, 3000W

    Part No. PD59594

    $556.37
    • Heating Element
    • 208V
    • 3000W
    • Dimension 16" X 15-1/2"
    • Wire Leads
    • Commonly used on TurboChef models such a : NGC, NGC-2019, NGC2 and where part is applicable.
  35. Hinge, LH

    Part No. PD101672

    $209.01
    • Door Hinge
    • LEFT SIDE
    • 11 1/2" Length
    • 8 1/4" Depth
    • STAINLESS STEEL
    • Used on various Turbochef models such as HHB2, NGC, NGC2 and only where part is applicable.
  36. Hinge, RH (W/LIP)

    Part No. PD110863

    $211.52
    • Door Hinge
    • RIGHT SIDE
    • 11 1/2" Length
    • 8 1/4" Depth
    • STAINLESS STEEL
    • Used on various Turbochef models such as HHB2, NGC, NGC2 and only where part is applicable
  37. INTERLOCK SWITCH

    Part No. PD38887

    $11.53
    • Commonly used on Turbo Chef models: D3V Series
  38. Keypad, Service Kit

    Part No. PD53334

    $164.73
    • Service Kit with trim bezel
    • SOTA
    • Used on various Turbochef Models such as NGO and where part is applicable
  39. KEYPAD,DECAL

    Part No. PD174032

    $170.42
    KEYPAD,DECAL
  40. KIT, HV TRANSFORMER, W/PACKAGING

    Part No. PD44298

    $444.15
    • TRANSFORMER
    • HIGH VOLTAGE
    • 208/240V
    • 60HZ
    • 1/4" mounting holes
    • 1/2" tabs
    • Used on various Turbo Chef ovens and microwave ovens.
    • Models:  ENCORE, ENCORE_2, GC, i1-Sota, i3, i5, NGC, NGO/Sota, NGC-2019, NGC2, NGO, NGO/Sota, Sota, TORNADO, TORNADO 2 and only where part is applicable.
  41. KIT, SILAR ROD

    Part No. PD54961

    $203.40
    • Set of 5 ea
    • Used on various Turbo Chef models such as NGC-01, and where part is applicable
  42. MAGNETRON KIT, SERVICE KIT

    Part No. PD442301

    $134.58
    • Magnetron Service Kit
    • With Hardware
    • 5" x 3-5/8" x 5"
    • Used on various Turbochef convection and microwave ovens such as BULLET, ENCORE, ENCORE_2, i3, i5, NGC, NGC2, NGO, NGO/Sota, Sota, TORNADO, TORNADO 2 and only where part is applicable.
  43. MAGNETRON KIT, SERVICE KIT

    Part No. PD442301A

    $155.12
    • Magnetron Service Kit
    • With Hardware
    • 5" x 3-5/8" x 5"
    • Used on various Turbochef convection and microwave ovens such as BULLET, ENCORE, ENCORE_2, i3, i5, NGC, NGC2, NGO, NGO/Sota, Sota, TORNADO, TORNADO 2 and only where part is applicable.
  44. MESS COOKING BASKET PTFE

    Part No. PD111161

    $56.28
    • Mesh cooking basket
    • PTFE
    • 14-1/2" X 13-1/2" X 1"
    • Black
    • Coated in Teflon
    • Used on various Turbochef odels such as C3, NGC and only where part is applicable.
  45. Motor, Blower Service Kit

    Part No. PD54247

    $1,083.39
    • Blower Motor Service Kit
    • Used on various Turbo Chef models such as HHC-2020 and where part is applicable.
  46. OVEN CLEANER, CASE

    Part No. PD48332

    $79.03

     

  47. PLASTIC COVER,DOOR

    Part No. PD175342

    $120.54
    PLASTIC COVER,DOOR
  48. REAR WAVEGUIDE WITH GASKET, SERVICE KIT

    Part No. PD41656

    $285.18
    REAR WAVEGUIDE WITH GASKET, SERVICE KIT
  49. RELAY, 240V AC

    Part No. PD175696

    $42.67
    • Turbochef Relay
    • 24 volt coil @ 240 V
    • Use for C70 Turbochef oven.
  50. RELAY, 24V DC

    Part No. PD175697

    $52.57
    • Turbochef Relay
    • DC
    • Commonly used on Turbochef models such as C3/AB, C3/C, C3/CMulti ED, C3/CMulti EW, C3/CMulti UK, C3/D, C3/D ED, C3/D EW, C3/D UK, C3 Multi and where applicable.
  51. RELAY, SOLID STATE, DUEL 40A

    Part No. PD47524

    $156.66
    • Relay
    • Solid State
    • Duel
    • 40A
    • Used on Turbo Chef models such as HHC-1618, HHC-2020, HHC-2620 and part is applicable.
  52. SCREEN, MESH (12 X 12)

    Part No. PD236427

    $24.57
    SCREEN, MESH (12 X 12)
  53. SCREW #8-32X3/8

    Part No. PD50664

    $3.15
    • Commonly used on Turbo Chef models: HHB, NGC
  54. SERVICE KIT, BMSC, SINGLE AXIS

    Part No. PD44891

    $1,215.98
    • Service Kit, Controller
    • BMSC
    • Single axis
    • Commonly used on various Turbochef models such as HHB, HHB2, HHC-1618, HHC-2020, HHC-2620, NGC, NGC2 and where part is applicable.
  55. SERVICE KIT, BOTTOM IR ELEMENT

    Part No. PD44297

    $349.37
    • Element
    • Bottom
    • IR
    • Used on various Turbochef models such as NGC, NGC2, Tornado and where part is applicable.
  56. SERVICE KIT, CAPACITOR UPGRADE

    Part No. PD44302

    $67.16
    • 4-1/4" x 2-3/4" x 1-1/2"
    • Used on various Turbo Chef models such as NGC, NGC2 and where part is applicable.
  57. SERVICE KIT, NGO WAVEGUIDE

    Part No. PD48477

    $282.90
    • NGO Waveguide Service Kit
    • Also Includes:
      • Sealant
      • 11x locking nuts
      • Gasket
    • Used on Turbo Chef model NGO and where part is applicable.
  58. SERVICE KIT, NGO-SOTA, LEFT HINGE

    Part No. PD47535

    $225.75
    • Left Hinge Assembly Service Kit
    • Used on Turbo Chef models NGO and where part is applicable.
  59. SERVICE LIT DISPLAY TFT 4.3

    Part No. PD47380

    $633.51
    • Digital Display
    • Used on TurboChef models such as Encore, Encore 2, NGO/Sota, i1-Sota and where part is applicable.
  60. SHAFT,TC3 STIRRER

    Part No. PD176007

    $20.61
    SHAFT,TC3 STIRRER
  61. SOCKET

    Part No. PD176085

    $36.58
    SOCKET
  62. SPACER,PHENOLIC

    Part No. PD176174

    $6.30
    SPACER,PHENOLIC
  63. SPRING, TRAILING ARM

    Part No. PD176260

    $41.67
    SPRING, TRAILING ARM
  64. STIRRER MOTOR, GEAR

    Part No. PD48447

    $328.22
    • Stirrer Motor or Gear Motor
    • 230V
    • 15 RPM
    • 60Hz
    • Used on various TurboChef models such as NGO/Sota, i1-Sota, i3, i5 and where part is applicable.
  65. THERMOCOUPLE, K TYPE

    Part No. PD12330

    $152.49

     

  66. Thermostat, High Limit

    Part No. PD46182

    $136.43
    • Thermostat, High Limit
    • Manual reset
    • 1PH
    • Used on models such as C3/AB, C3/C, C3/CMulti ED, C3/CMulti EW, C3/CMulti UK, C3/D, C3/D ED, C3/D EW, C3/D UK, C3Multi and where part is applicable.
  67. THERMOSTAT, HIGH LIMIT, EGO 300C MANUAL

    Part No. PD44183

    $147.84
    • Hi-Limit Thermostat
    • Ego
    • Manual Reset 
    • 24" Cap
    • Bulb = 6-1/4" X 1/8"
    • 5/32" Bulb outer diamenter 
    • STAINLESS STEEL
    • SILVER
    • 1/4" TAB TERMINALS (6)
    • CENTERS -1 1/2" , 1 3/32"
    • Used on various Turbochef models such as BULLET ,ENCORE SERIES ,G5 ,HHC SERIES ,HHD-1002B ,NGC SERIES ,TUFHCT421547VJ ,1618 ,2020 , Hhb, Hhb2, Hhc-2020, Hhc-3240,Ngc, Ngc2, Ngo/Sota, I3, I5 and where part is applicable.
  68. Waveguide cover, service kit

    Part No. PD61328

    $440.12
    • Waveguide cover
    • Sealant and hardware
    • Commonly used on Turbochef models such as: NGC, NGC2 and where part is applicable.

68 Part(s)

Set Descending Direction
per page