R18

69 Part(s)

Set Ascending Direction
per page
  1. Wheel Assy.

    Part No. PD162155

    $164.87
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U, R18, R25T-300 Series, R25T1-300 Series, R25TP-300 Series, R40T-300 Series, R40T1-300 Series and R40TP-300 Seri
  2. Wheel

    Part No. PD162065

    $81.30
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U, R18, R25T-300 Series, R25T1-300 Series, R25TP-300 Series, R40T-300 Series, R40T1-300 Series and R40TP-300 Seri
  3. Transparent Cover, Assembly, Lid

    Part No. PD41741

    $111.14
    • Center lid, small
    • Comes with gasket
    • For R18 models with serial numbers 122/xxxx and up.
    • For Series R25T-300, R25T1-300, R25TP-300, R40T-300, R40T1-300, R40TP-300, R60TS-200
  4. TRANSFORMER

    Part No. PD19367

    $385.69
    TRANSFORMER
  5. Tool, Seal Removal

    Part No. PD162428

    $51.01
    • Commonly used on Robot Coupe models: CL60 Bulk, CL60 Pusher, R8, R8U, R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U and R18
  6. Terminal Block (Canada Only)

    Part No. PD163080

    $63.30
    Terminal Block (Canada Only)
  7. Switch, Stop (Red)

    Part No. PD162487

    $96.37
    • AC15 240V 3A
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U, R18, R25T-300 Series, R25T1-300 Series, R25TP-300 Series, R40T-300 Series, R40T1-300 Series, R40TP-300 Series
  8. Switch Knob,Speed Selec.

    Part No. PD162936

    $54.16
    Switch Knob,Speed Selec.
  9. Spring, Lid

    Part No. PD162158

    $112.51
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000385 and below and R18
  10. Spring, Lid

    Part No. PD162170

    $89.48
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000376 and above, R10U and R18
  11. Spacer Stainless Steel 50MM

    Part No. PD162280

    $87.95
    • Blade ring
    • Used on various Robot Coupe models such as R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U and R18 and only where part is applicable.
  12. Spacer Stainless Steel 30MM

    Part No. PD162161

    $68.45
    • Commonly used on Robot Coupe models: R18
  13. Spacer 15MM Stainless Steel

    Part No. PD162423

    $61.41
    • Commonly used on Robot Coupe models: R8, R8U, R10 (ETL) serial numbers R10-000385 and below and R18
  14. SMOOTH BLADE ONLY, STRAIGHT EDGE

    Part No. PD2733310

    $151.55
    • Smooth Blade Only
    • Straight edge
    • 3mm
    • Stainless Steel
    • Used on various Robot Coupe models such as R10, R10D, R10D V.V., R10P, R10U, R18 and only where part is applicable.
  15. Shield, Motor Support

    Part No. PD162694

    $34.98
    • Commonly used on Robot Coupe models: R18, R8, R8U
  16. SEAL, MOTOR SUPPORT

    Part No. PD2864720

    $29.08
    • Motor Seal
    • 1-3/8" outer x 1" inner x 1/4"
    • Used on various Robot Coupe models such as Blixer 5V, BLIXER 6V, R10, R10E, R10P, R10U, R18, R4N, R4X, R4Y, R502E, R502X, R502Y, R602E, R602V E, R602Y, R6N, R6V, R6VN, R6X, R6Y, R8, R8U and only where part is applicable.
  17. Seal, Lid

    Part No. PD162109

    $116.00
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000385 and below and R18
  18. Seal Assy, Motor Support

    Part No. PD162886

    $184.88
    • Seal Assembly
    • For motor support
    • Used on various Robot Coupe models such as R 20, R10, R10D, R10D V.V., R10P, R10U, R18, R20D, R20D V.V., R8, R8U and only where part is applicable.
  19. Seal (JF410A)

    Part No. PD162290

    $14.58
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000376 and above, R10U and R18
  20. Seal (27x36x6.5)

    Part No. PD162490

    $43.73
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000376 and above, R10U and R18
  21. Screw, Motor Support

    Part No. PD162626

    $8.25
    • Commonly used on Robot Coupe models: R18
  22. Screw, Lid Lever

    Part No. PD162381

    $9.38
    • Used on various Robot Coupe models such as: R8, R8U, R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U and R18 and where part is applicable.
  23. Screw, Bolt Locking

    Part No. PD162562

    $8.05
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000385 and below and R18
  24. Screw W/ Nut, Lid Sen. (Mech Sw.)

    Part No. PD163237

    $14.30
    Screw W/ Nut, Lid Sen. (Mech Sw.)
  25. Screw Cover

    Part No. PD162180

    $8.25
    • Commonly used on Robot Coupe models: R8, R8U, R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U and R18
  26. RELAY

    Part No. PD37905

    $248.73
    RELAY
  27. Pulse Push Button, Black

    Part No. PD162783

    $106.76
    • Commonly used on Robot Coupe models: R301 Ultra, R301 Ultra C, R301 Ultra B, R8, R8U, R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U and R18
  28. Plastic Spacer (10 mm)

    Part No. PD162759

    $55.93
    • Plastic Spacer
    • 10 MM
    • Commonly used on Robot Coupe models: R8, R8U, R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10, R18, RSI-10 and where part is applicable
  29. Pin, Lid Hinge

    Part No. PD162270

    $80.21
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U and R18
  30. PC CONTROL BOARD

    Part No. PD19347

    $381.32
    li>PC Board only
  31. Commonly used on robot Coupe models such as R10D, R18, R20D and where part is applicable.
  32. Call with serial number before ordering to confirm.
  • OVERLOAD RELAY

    Part No. PD37907

    $245.90
    OVERLOAD RELAY
  • O Ring, Trans Lid Cover

    Part No. PD162847

    $85.78

     

  • O Ring, Lid

    Part No. PD162178

    $11.23
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U, R18, R25T-300 Series, R25T1-300 Series, R25TP-300 Series, R40T-300 Series, R40T1-300 Series, R40TP-300 Series
  • MOTOR, 2 SPEED 208-230V 3PH

    Part No. PD40015

    $3,230.73
    • With bearings
  • Motor Support

    Part No. PD162239

    $923.32
    • Commonly used on Robot Coupe models: R18
  • LOCK NUT, BLADE

    Part No. PD3985610

    $92.97
    • Blade Lock Nut
    • Commonly used on Robot Coupe models such as R10, R10D, R10D VV, R10P, R10U, R18, R20D, R20D VV.
  • Light, Red

    Part No. PD38652

    $27.34
    • Commonly used on Robot Coupe models: R10 D Series
  • LID SEAL, GRAY

    Part No. PD32848

    $114.06
    • Gray Lid Seal
    • 40-1/2" X 1"
    • Commonly Used On Models: R10P, R10 Ultra, R18
  • Lid Assembly (Pin w/Seal)

    Part No. PD163026

    $1,439.28
    • Commonly used on Robot Coupe models: R10, R18
  • Lid Assembly

    Part No. PD162275

    $1,319.11
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000385 and below and R18
  • Knob, Bowl Securing

    Part No. PD162554

    $60.00
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U and R18
  • Handle

    Part No. PD162086

    $75.38
    • Commonly used on Robot Coupe models: CL60 Bulk, CL60 Bulk Series D, CL60 Pusher, CL60 Pusher Series D, R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U and R18
  • Gasket, Access Cover

    Part No. PD162618

    $77.19
    • Commonly used on Robot Coupe models: R18
  • Fuse Holder

    Part No. PD162176

    $34.98
    • Commonly used on Robot Coupe models: R18
  • FUSE BLOCK W/FUSE & HOLD

    Part No. PD37909

    $59.90
    • Commonly used on Robot Coupe models: R10 D Series
  • Fuse 20A 400V

    Part No. PD162259

    $30.68
    • Commonly used on Robot Coupe models: R18
  • Front Name Plate

    Part No. PD162392

    $39.39
    • Commonly used on Robot Coupe models: R18
  • Foot

    Part No. PD162041

    $45.26
    • Commonly used on Robot Coupe models: R18, R25T-300 Series, R25T1-300 Series, R25TP-300 Series, R40T-300 Series, R40T1-300 Series and R40TP-300 Series
  • Data Plate

    Part No. PD162138

    $42.81
    • Commonly used on Robot Coupe models: R18
  • Cover, Screw (MS 21MM)

    Part No. PD162695

    $8.05
    • Commonly used on Robot Coupe models: R18, R8, R8U
  • Cover, Back Access

    Part No. PD162476

    $160.40
    • Commonly used on Robot Coupe models: R18
  • Cord (R25T R40T)

    Part No. PD137100

    $87.08
    • Commonly used on Robot Coupe models: R18, R25T-300 Series and R25T1-300 Series
  • Clip 15 S.S. (E)

    Part No. PD162396

    $15.58
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U, R18, R25T-300 Series, R25T1-300 Series, R40T-300 Series and R40T1-300 Series
  • Button, On Push , Green

    Part No. PD162628

    $109.97
    • AC15 240V 3A
    • Commonly used on Robot Coupe models: R301 Ultra, CL50 Series B, CL55 Pusher, CL60 Bulk, CL60 Pusher, R301 Ultra C, R301 Ultra B, R8, R8U, R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U, R18 and C
  • Bushing (New Style)

    Part No. PD162625

    $11.05
    • Bushing
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000376 and above, R10U, R18 and R40TP-300 Series
  • Bracket/Lid Mount(Round)

    Part No. PD162892

    $266.87
    Bracket/Lid Mount(Round)
  • Bracket, Lid Mount

    Part No. PD162462

    $236.57
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000376 and above, R10U and R18
  • Bracket, Foot

    Part No. PD162248

    $27.74
    • Commonly used on Robot Coupe models: R8, R8U, R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U and R18
  • Bowl Magnet Assy.

    Part No. PD162417

    $34.83
    • Bowl Magnet Assembly
    • Commonly used on Robot Coupe models: R8, R8U, R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U and R18
  • Bowl

    Part No. PD162073

    $1,991.97
    • Bowl *
    • Stainless steel
    • Commonly used on Robot Coupe models: R18, R20D, R20D VV.
  • Bolts, Shock Absorbing

    Part No. PD162784

    $14.90
    • Commonly used on Robot Coupe models: R8, R8U, R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U and R18
  • Bolts, Shock Absorb.

    Part No. PD162632

    $34.23
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U and R18
  • Bolt, Lid Spring

    Part No. PD162367

    $238.70
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000376 and above and R10U, R18
  • Bolt, Lid Spring

    Part No. PD162379

    $242.77
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000385 and below and R18
  • Blade Support R10 R18

    Part No. PD162236

    $630.50
    • Blade Support Shaft
    • Metal
    • All blades 3, bushings and cap fit onto this shaft.
    • Commonly used on Robot Coupe models: R10 (ETL) serial numbers R10-000385 and below, R10, R10P, R18, R20D, R20D V.V. where applicable.

    These are serial number sensitive.

  • BLADE ONLY, SERRATED

    Part No. PD38474

    $172.93
    • Blade only
    • Serrated
    • Commonly used on Robot Coupe models: R10 (serial below 385 and above 376, R10U, R18 where part is applicable.
  • Blade Assy Comp, Serrated

    Part No. PD163038

    $1,615.60
    * Blade Assy Comp(Serrated
  • 30amp Plug (R15 R25T)

    Part No. PD137101

    $124.26
    • Commonly used on Robot Coupe models: R18, R25T-300 Series, R25T1-300 Series and R25TP-300 Series
  • 2 SPEED DRUM SWITCH

    Part No. PD37906

    $324.48
    2 SPEED DRUM SWITCH
  • 69 Part(s)

    Set Ascending Direction
    per page