Nieco
-
5/8" CHROME FLOOR PLUG
Part No. PD26206
$2.27- Chrome floor plug to cover cam lock mechanism
- 5/8" diameter hole, plug is 3/4'' outside diameter
- Prevent food and debris from filling these holes and prevent health hazard. Also prevents health inspection violations.
-
ARRESTOR, FLAME, DUAL (F/13 BELT)
Part No. PD234605
$1,200.44- 30" X 9-3/4" OVERALL
Commonly used on Nieco MPB94 and where part is applicable -
-
-
BELT, CONVEYOR-24" WIDE ($/FT)
Part No. PD130098
$454.48- Conveyor Belt
- 24" wide x 12" section
- Sold per foot
- 304 stainless steel
- Used on various Nieco models such as 940, 960, 962. Series: 300, 400, 500, 600, 800 and only where part is applicable.
-
BELT,ROD (FLEX SIDE,PER FT)
Part No. PD234569
$103.20- Commonly used on Nieco models such as: 750BYB, 8025G, 9015, 9025, N750 SERIES and where applicable.
-
-
Bi-Metal Safety/Thermostat - 550F Fixed
Part No. PD11646
$79.67- Bi-Metal Safety/Thermostat - 550 F Fixed
- Use for Counter Top & Built-ins
- Use on various Wells models such as: MOD-100D, MOD-200, MOD-200D, MOD-200DM, MOD-300, MOD-300D, MOD-300DM, MOD-400, MOD-500DM, SS-10, SS-10D, SS-206, SS-206D, SS-206E, SS-206ED, SS-206ER, SS-206ERD, SS-4, SS-4D, SS-8, SS-8D, SW-10 , and where part is applicable.
-
BLADE, STRIPPER
Part No. PD129962
$679.23- Stripper Blade
- Use for Single Belt Units Only- Gas Models: 940, 960, 962; Series: 300, 400, 500, 600, 800
-
BLADE, STRIPPER
Part No. PD234597
$666.28- Commonly used on Nieco models such as: MPB84, MPB94 and where applicable.
-
-
Board, Speed Control W/ Pot 12V
Part No. PD53187
$1,395.66- 12V DC
- Used on various Nieco models such as 142E and where part is applicable
-
BOX - GREASE COLLECTION
Part No. PD129968
$354.54- Grease Collection Box
- Used on various Nieco models such as 960, 962G; Series: 800 and where part is applicable.
-
-
BRUSH, MOTOR - (SET/2)
Part No. PD130323
$78.27- Carbon Brush - (Set of 2) (For PD129237 Motor)
- Use for 505A, 535A, 850 Split Models, 930, 950, 980, 1015A, 615GTR, 815E, 815GTR
-
-
BRUSH,MOTOR (SET OF 2)
Part No. PD130154
$147.76- Carbon Brush - (2 Required)
- Use for 824, 940, 960, 962; Series: 300, 400, 500, 600
-
BRUSHES (GRAY MOTOR) (2)
Part No. PD234587
$62.10- Brush Set (2)
- with springs
- Used on Nieco broiler where part is applicable.
-
Burner Orifice - LP, #57
Part No. PDG10994
$29.07- Burner Orifice
- LP gas, #57
- Thread Size 15/64 -36"
- Size 74"
- Use for Nieco Broiler Gas Models: 930, 940, 950, 960, 962, 980; Series: 300, 400, 500, 600, 800
-
Burner Orifice - Nat, #50
Part No. PDG10991
$26.02- Burner Orifice - Nat, #50
- Thread Size 15/64 -36"
- Size 52"
- Use for Gas Models: 930, 940, 950, 960, 962, 980; Series: 300, 400, 500, 600, 800
-
BURNER, SHIELD MOUNTING KIT
Part No. PD127534
$30.40- For IRB Burner.
- 4 Nuts, 4 Bolts & 4 Spacers Only Upper or Lower.
- Commonly used on Marshall Air models such as: 2424G, FR24BG, FR1212BG and where part is applicable.
-
BURNER,INFRARED (UPPER)
Part No. PD234583
$547.58- Commonly used on Nieco models such as: 8025G, 9015, 9025 and where applicable.
-
-
CAP, BRUSH (NEW STYLE)
Part No. PD130321
$51.92- Brush Holder Cap (For PD130322)
- Use for 824, 940, 960, 962; Series: 300, 400, 500, 600
-
CAP, BRUSH HOLDER (OLD STYLE)
Part No. PD130174
$51.92- Brush Holder Cap (For PD130173)
- Old Style
- Use for 824, 940, 960, 962; Series: 300, 400, 500, 600
-
CASTER, SWIVEL (5,1/2-13,W/BRK)
Part No. PD234676
$90.86- Swivel Caster
- Thread 1/2 -13
- with brake
- 5" wheel diameter
- Commonly used on Neico models :
- 615GTR
- 815GTR
- Broilers:
- 940
- 960
- 962
- 980
- May be used on many equipment manufacturers.
-
Chain Breaker (For PD130087)
Part No. PDG11378
$429.81- Chain Breaker (For PD130087), 25 (1/4" Pitch) thru 60 (3/4" Pitch)
- Eliminates need for a hammer & a punch
- Simple to use
- Saves Time
- High Quality
- Use for 930, 940, 950, 960, 962, 980
-
CHAIN, DRIVE - ($/FT)
Part No. PD130087
$25.52- Drive Chain (Sold Per Ft)
- Commonly used on Nieco models such as: 1015A, 1015C, 1015G, 1015GC, 1332, 1335, 1352, 1355, 1424, 1424E, 142E, 1430E, 1435E, 1450, 1450E, 522G, 532E, 532G, 535E, 535G, 615GTR, 624, 624E, 650, 650-G, 650E, 732E, 732G, 735E, 735G, 750BYB, 8025G, 815E, 815GTR, 824, 824E, 850, 850E, 880, 885, 9015, 9025, 90357, 922E, 922G, 930, 930E, 932E, 932G, 940, 950, 950E, 952E, 952G, 960, 962, 980, JF143, JF64-3G, JF93G, JF94E, JF94G, MPB73, N550 SERIES, N550G, N750 SERIES, N850 SERIES and where applicable.
-
Cheesemelter Rack 19"W
Part No. PD127656
$364.94- Cheesemelter Rack, 24"
- Chrome
- 19"W x 13-3/4"L
- Use for Imperial Cheesemelters Series: ICMA (24" Units)
-
-
CHUTE - GREASE DRAIN
Part No. PD130221
$353.77- Grease Drain Chute
- Commonly used on Nieco models such as 1424, 1424E, 1450, 1450E, 824, 824E, 850, 850E, 950, 950E, N850 SERIES and only where part is applicable.
-
CHUTE-GREASE DRAIN
Part No. PD129959
$147.16- Grease Drain Chute
- Used on various Nieco models such as 940, 960, 962; Series: 600, 800 and where part is applicable.
-
CLEANING KIT (5 BRUSHES)
Part No. PD234579
$102.00- Commonly used on Nieco models such as: 1015A, 615GTR, 815GTR and where applicable.
-
CLEANING KIT, BROILER
Part No. PD125850
$174.01- Broiler Cleaning Kit
- Consists of:
- (1) S/S Brush
- (1) Hard Brass Brush — Venturi
- (1) Soft Brass Brush
- (1) Pair, Neoprene Gloves
- (1) Shaft Cleaning Tool
-
-
Coil - 120V
Part No. PDG10995
$202.95- Coil - 120V (For PD114131, PD114125 or PD114124)
- Use for Gas Models (Series): 300, 400, 500, 600, 800, 900
-
CONTACTOR 120V
Part No. PD129896
$254.65- Contactor - 120V/30A, DPST
- Use for 940, 960; Series: 300, 400, 500, 600, 800
-
CONTACTOR 120V
Part No. PD129900
$191.47- Contactor - 120V
- Commonly used on Nieco models such as: 1424, 1424E, 1430E, 1435E, 1450, 1450E, 624, 624E, 650, 650-G, 650E, 824, 824E, 850, 850E, 880, 885, 930, 930E, 950, 950E, N850 SERIES and where applicable.
-
Control, Brushless Motor
Part No. PD51521
$690.88- Speed Controller Motor with Display
- Commonly used on Nieco models such as: 750BYB, JF143, JF62, JF62-2, JF63, JF63-2, JF64-3G, JF93G, JF94E, JF94G, MPB73, MPB94, N1535, N550 Series, N550G, N750 SERIES and where applicable.
-
CONTROL, MOTOR - SCR 120V
Part No. PD129704
$493.64- SCR Motor Control - 120V
- Commonly used on Nieco models such as: 11015A, 1015GC, 1020G, 1332, 1335, 1352, 1355, 1424, 1430E, 1435E, 1450, 522G, 532E, 532G, 535E, 535G, 615GTR, 624, 624E, 650, 650-G, 650E, 732E, 732G, 735E, 735G, 815GTR, 820E, 820G, 824, 824E, 850, 850E, 880, 885, 922E, 922G, 930, 930E, 932E, 932G, 940, 950, 950E, 952E, 952G, 960, 980, N850 SERIES and where applicable.
-
CONTROL, MOTOR - SCR 230V
Part No. PD129710
$551.35- SCR Motor Control - 230V
- Use for Export: 930, 940, 950, 960, 962, 980; Series: 300, 400, 500, 600, 800
-
CONTROL, TEMP - AUTO
Part No. PD129492
$842.16- Temperature Control - with Knob
- Use for Gas Models: 930, 950, 980
-
CONTROL, TEMP - KIT 120/230V
Part No. PD130103
$224.25- Temperature Control - Auto, without Dial Plate & Knob 120/240V
- Use for Gas Models: 940, 960, 962; Series: 300, 400, 500, 600, 800
-
CONTROL,IGNITION (24V)
Part No. PD234611
$458.27- Ignition module
- 24V
- 50/60 HZ
- With (3) female disconnect terminals
- Commonly used on various Nieco models such as 550G, 750BYB,MPB94, N1535, JF143, JF63-2-BG, JF64-2, JF64-3G and only where part is applicable.
-
CONTROL,LOAD SENSING (DIGITAL)
Part No. PD234588
$1,113.28- Commonly used on Nieco models such as: JF143, MPB73, N550 SERIES, N750 SERIES and where applicable.
-
CONTROL,SPEED (MULTI-CHANNEL)
Part No. PD234595
$1,178.45- Commonly used on Nieco models such as: JF93G, JF94E, MPB94 and where applicable.
-
CONTROLLER,TEMP (100-1100F)
Part No. PD234612
$796.79- Commonly used on Nieco models such as: 1332, 1335, 1352, 1355, 1424E, 1430E, 1435E, 1450E, 522E, 532E, 535E, 615GTR, 624E, 650E, 732E, 735E, 815GTR, 824E, 850E, 922E, 930E, 932E, 950E, 952E, N850 SERIES and where applicable.
-
Conveyor Belt 22"w (Sold by Foot)
Part No. PD130336
$166.70- Conveyor Belt
- 22" Wide
- 7 Gauge
- 5/8 Pitch
- Sold Per Foot
- Commonly used on Nieco models such as 1424, 1424E, 1424G, 1430E, 1435E, 1450, 1450E, 624, 624E, 650, 650E, 824, 824B, 824E, 824G, 850, 850E, 880, 885, 922E, 930, 930E, 932G, 950, 950E, 952E, 952G, 980, and where part is applicable
-
CONVEYOR DRIVE MOTOR
Part No. PD129237
$1,656.16- Gear Motor - 90 VDC
- Commonly used on Nieco models such as: 1015A, 1015C, 1015G, 1015GC, 1020G, 1352, 1355, 1424, 1424E, 1430E, 1435E, 1450, 1450E, 522G, 532E, 532G, 535E, 535G, 624, 624E, 650, 650-G, 650E, 732E, 732G, 735E, 735G, 820E, 820G, 824, 824E, 850, 850E, 880, 885, 922E, 922G, 930, 930E, 932E, 932G, 950, 950E, 952E, 952G, 980, N850 SERIES and where applicable.
-
Electrode
Part No. PDG11011
$60.26- Electrode (For Use with PD114529 or PD114528)
- Use for Gas Models: 922G, 930, 940, 950, 960, 962, 980
-
ELECTRODE, PILOT IGNITION
Part No. PD10512
$60.26- Electrode
- With bracket
- 2-5/8" overall length
- 1/8" flat tab
- For spark electrode spark wire
- 20" long
- Orange
- 1/8" female round spark electrode on one end
- 1/8" flat female push on terminal
- Used on various Nieco models such as 1015A, 1015C, 1015GC, 1020G, 522 GAS, 532 GAS, 535 GAS, 615GTR, 624 GAS, 650 GAS, 732 GAS, 735 GAS, 735G, 815GTR, 820G, 824 GAS, 824G, 850 GAS, 880 GAS, 885 GAS, 922 GAS, 930 GAS, 932 GAS, 950, 950 GAS, 952 GAS, 980, 980 GAS and where part is applicable
-
Element - 208V/2200W
Part No. PDG11004
$310.88- Element
- 208V/2200W
- A = 28-1/4"
- B = 2"
- Use for Series: 300, 400
- Please check the voltage of your old element before ordering.
-
Element - 240V/2200W
Part No. PDG11005
$235.62- Element - 240V/2200W
- 28-1/4" X 2"
- Use on various Nieco model such as 1332E, 1335E, 1352E, 1355E, 1424E, 1430E, 1435E, 1450E, 532E, 535E, 624E, 650E, 732, 732E, 735E, 815E, 824B, 824E, 850E, 922E, 930E, 932E, 950E, 952E and whwere part is applicable
- Please check the voltage of your old element before ordering.
-
Element, 230V, 2200W
Part No. PD119952
$304.53- Element
- 230V, 2200W
- A = 28-1/4"
- B = 2"
- For Broilers
- Please check the voltage of old element before ordering.
- Used on Neico models 815E, 820E
-
Element, 250V, 2200W
Part No. PD119954
$339.73- Element
- 250 V
- 2200 W
- 28-1/4" Length
- B 2" Width
- Used on various Nieco models such as 1332E, 1335E, 1352E, 1355E, 1424E, 1430E, 1435E, 1450E, 532E, 535E, 624E, 650E, 732, 732E, 735E, 815E, 824B, 824E, 850E, 922E, 930E, 932E, 950E, 952E and where part is applicable.
-
ELEMENT, BOOSTER HEATER
Part No. PD41902
$459.43- Immersion Heating Element
- Screw Plug Style
- 2" NPT
- 208V
- 5000W
- 3 Phase
- A= 12-7/8"
- 14-1/2" inside length
- 3/8" x 11" thermowell gasket included
-
-
ELEMENT, HEATER 24" 230V HAIRPIN
Part No. PD42517
$304.53- Hairpin Style Element
- 230V
- 24"
- Commonly used on Neico models: 815E, 820E
-
ELEMENT,HEATER (950W,220V)
Part No. PD234599
$270.53- Element
- Length 16"
- 220 V AC
- 950 W
- Commonly used on various Nieco models such as MPB94 and only where part is applicable.
-
Full Burner Screen
Part No. PD44061
$428.13- Used on various Nieco models such as 615GTR, 815GTR, and where part is applicable.
- Dimensions are 17-3/4" x 5"
-
Fuse ABC-5 - 250V-5A
Part No. PDG11006
$10.95- Fuse ABC-5 - 250V-5A
- Size 1/4" x 1-1/4"
- Use for 940, 960; Series: 300, 400, 500, 600, 800
-
Fuse Holder
Part No. PDG11007
$34.12- Fuse up to 250V/20A
- For 1/4" x 1-1/4" (For PD124021)
- Use for 940, 960; Series: 300, 400, 500, 600, 800
-
Fuse Holder (For PD123934)
Part No. PDG11013
$436.64- Fuse up to 300V
- 15A
- For 13/32" x 1-5/16" Fuse
- 1/4" Tabs
- Used on various Nieco models such as 1015A, 1015C, 1015G, 1015GC, 1332, 1335, 1352, 1355, 1424, 1424 GAS, 1424E, 142E, 1430E, 1435E, 1450, 1450E, 522 GAS, 522E, 532 GAS, 532E, 535 GAS, 535E, 615E, 615GTR, 624 GAS, 624E, 650 GAS, 650E, 732 GAS, 732E, 735 GAS, 735E, 735G, 815E, 815GTR, 824 GAS, 824B, 824E, 824G, 850 GAS, 850E, 880 GAS, 885 GAS, 922 GAS, 922E, 930 GAS, 930E, 932 GAS, 932E, 950, 950 GAS, 950E, 952 GAS, 952E, 980, 980 GAS where part is applicable
-
FUSE SC-5 600V
Part No. PD53464
$36.40- Type SC-5
- 13/32" x 1-5/16"
- 600V
- 5A
- Time Lag
- Used on various Nieco models such as 1015A, 1015C, 1015G, 1015GC, 1332, 1335, 1352, 1355, 1424, 1424 GAS, 1424E, 142E, 1430E, 1435E, 1450, 1450E, 522 GAS, 522E, 532 GAS, 532E, 535 GAS, 535E, 615E, 615GTR, 624 GAS, 624E, 650 GAS, 650E, 732 GAS, 732E, 735 GAS, 735E, 735G, 815E, 815GTR, 820E, 824 GAS, 824B, 824E, 824G, 850 GAS, 850E, 880 GAS, 885 GAS, 922 GAS, 922E, 930 GAS, 930E, 932 GAS, 932E, 950, 950 GAS, 950E, 952 GAS, 952E, 980, 980 GAS where part is applicable
-
Gas Hose - 1/2" x 3'
Part No. PDG11021
$145.92- Blue plastic coated gas hose
- With male swivel ends.
1/2" NPT X 36" Length - Inner diameter 1/2"
- Rotation technology (patent pending) reduces stress at both hose ends
- Antimicrobial PVC Coating
- Inhibits growth of bacteria, mold and mildew on the gas connector (patent pending)
- Stainless Steel Construction
- For Caster-mounted Commercial cooking equipment
- Heavy-duty, flexible, corrugated 304 stainless steel tubing
- Stainless Steel Braid
- Tight-weave braid prevents corrugations from stretching as equipment is moved
- Used on various Nieco models such as 940 and only where part is applicable.
-
Gas Hose - 3/4" x 3'
Part No. PDG11019
$197.87- Blue plastic coated Gas Hose
- With male swivel ends
- Polytec coated stainless steel braided hose
- 3/4" MPT X 36"
- Inner Diameter 1/2"
- Used on various Nieco models such as 930, 950, 960, 962, 980; Series: 300, 400, 500, 600, 800 and only where part is applicable.
-
Gas Line Tubing Kit, Specify 8
Part No. PD129840
$179.30- Gas Line Tubing Kit
- Specify 8
- Use for Gas Models: 960, 962
-
Gas Pilot Valve - Red Push Button
Part No. PDG10997
$393.50- Gas Pilot Valve - Red Push Button
- Gas In/Out: 1/2" NPT
- Pilot In/Out: 1/4" CCT
- BTU 339,500
- Operator Millivolt
- Use for Gas Models: 650 single, 930, 950
-
Gas Pilot Valve - Red Push Button
Part No. PDG10998
$394.63- Gas Pilot Valve - Red Push Button
- Gas In/Out: 3/4" NPT
- Pilot In/Out: 1/4" CCT
- BTU 401,580
- Operator Millivolt
- Use for Gas Models: 980
-
Gas Pressure Regulator - 1/2" NPT, Nat
Part No. PDG11568
$88.62- Gas Pressure Regulator
- 1/2" NPT
- Nat "High Gas"
- Water Column 3 -6
- Use for Gas Models: 940, 950, 960, 962, 980
- Works on models 940 & 960 after 10/1/90 only
- Also used on various Nieco models such as 1424, 1424 GAS, 732 GAS, 735 GAS, 735G, 824 GAS, 824G, 850 GAS, 880 GAS, 885 GAS, 950, 950 GAS, 952 GAS, 980, 980 GAS
-
Gas Pressure Regulator - 1/2" NPT, Nat
Part No. PDG11573
$67.69- Gas Pressure Regulator
- 1/2" NPT
- Nat "Low Gas"
- Water Column 4-8
- Use for Gas Models (Series): 300, 400, 500, 600, 800, 900
- Serves as both High & Low gas on model 930
-
Gas Solenoid - High, 120V, 1/2"
Part No. PD10351
$169.34- Gas Solenoid - High
- Gas In 1/2" NPT, Gas Out 1/2" NPT
- 327,860 BTU/Hr
- 120 Volts
- Type Nat/LP
- Use for Gas Models: 930, 940, 960, 962; Series: 300, 400, 500, 600, 800
- Main gas solenoid on model 930
-
Gas Solenoid - High, 120V, 1/2"
Part No. PDG11015
$304.85- Gas Solenoid - High, 120V, 1/2"
- 328,000 BTU/Hr
- Use for Gas Models: 930, 950, 980
-
Gas Solenoid - High, 208/240V, 1/2"
Part No. PDG11016
$716.31- Gas Solenoid - High, 208/240V, 1/2"
- 327,860 BTU/Hr
- Use for Gas Models: 930, 950, 980
-
Gas Solenoid - Main, 120V, 3/4"
Part No. PDG11569
$345.14- Gas Solenoid - Main
- Gas In 3/4" NPT, Gas Out 3/4" NPT
- 300,000 BTU/Hr
- 120 Volts
- Type Nat/LP
- Use for Gas Models: 940, 960, 962
-
-
-
Gear Motor 24VDC Brushless
Part No. PD59860
$1,108.49- Gear Motor
- 24VDC
- Brushless
- 1.5 amp
- 11.6 RPM
- Commonly used on Nieco models such as JF94E, MPB73 and where part is applicable.
-
GEAR MOTOR,24VDC,40 LB/IN,W/30 PULSE EN
Part No. PD39925
$690.67Commonly used on Nieco models: 8025 GAS, 9015, 9025 -
GLOVES, NEOPRENE - PAIR - 17"
Part No. PD125814
$114.80- Neoprene Coated Mittens & Glove (Sold in Pairs, 350 F Max. Temp Resistance)
- 17" Gloves