Groen steam jacketed kettles are available in either electric or gas configurations. These high-quality and efficient kettles set the standard for consistent performance in commercial kitchens. They are energy-efficient and help lower utility bills and improve operations. The Groen construction is heavy-duty to ensure years of worry-free operation. With special features such as reinforced rims, they stand up to the demands of busy commercial kitchens. Groen gas-heated kettles are 58-65% efficient. In 2014, Groen kettles were awarded Foodservice Equipment & Supplies magazine's Best-in-Class by the foodservice consultant community. You can always rely on a Groen kettle to bring satisfaction to your food service requirements in your restaurant or commercial kitchen. See our list of Groen Kettle parts below.
-
PRESSURE REGULATOR, PROPANE
Part No. PD48152
$122.36- Pressure Regulator
- LP Gas
- Used on various Groen models such as Ah-40 and where part is applicable.
-
-
PROBE, WATER LEVEL
Part No. PD128578
$96.30- Water Level Electrode
- 5-1/4" Overall
- 3/8" MPT
- 3-7/16" under Nut
- 1/4" Probe tip
- 3" Insulator
- Use on various Groen models such as fo INA/2-100, TDB-20, TDB-40, TDB/7, TDB/7-20, TDB/7-40, TDBC-20, TDBC-40, TDH-20, TDH-40, TDHC-20, TDHC-40,TDB/7-(20, 40) made after Feb. 6, 1995 and only where part is applicable.
-
-
Relay, Low Water Cutout
Part No. PD17300
$488.61- Low Water Cutout Relay
- 220 V
- Commonly used on Groen models such as D20, D40, D60, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40, EE-40 and where applicable.
-
RING SET- 10 PACK
Part No. PD37069
$123.42- Ring Set
- Pack of 10
- 1-5/8" OD
- 1-1/4" ID
- Used on various Groen models such as D20, D40, D60, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40, MW/D, MW/DT and where part is applicable.
-
Ring Tolerance 1/2In
Part No. PD41919
$10.75- Metal Insert
- Used for ball knob on Groen series such as TD, FPC and where part is applicable.
-
-
Safety, Baso 120V, w/ Fittings
Part No. PD38389
$695.66- Baso Safety -120V, without fittings
- Gas In: 1/2" NPT
- Gas Out: 3/4" NPT
- Pilot In/Out: 1/4" CCT
- BTU: 240,000
- Commonly used on Groen such as : HH/4, HH/4E where part is applicable.
-
SCRAPER FINGER, .531 ID
Part No. PD33134
$90.84- Scraper Teeth
- 1-1/2" Wide
- 3-5/8" length
- 1/2" ID
- Used on various Groen Agitator models such as TA/150, TA/3
-
SCRAPER HALF FINGER (teeth)
Part No. PD35616.1
$64.52- Scraper
- Half Finger
- ID .531"
- 7/8" wide
- 2-1/2" length
- Commonly used on Groen models such as TA/2, TDC/3, TDB/7-40-TA/2
-
Screw Truss Head
Part No. PD42260
$3.90- Screw Truss Head
- Commonly used on Groen such as : TDH-20, TDH-40, TDHC-20, TDHC-40 where part is applicable.
-
SHAFT HANDLE 1/2" OD
Part No. PD79090
$36.84- Shaft Handle
- 1/2" OD
- Used on various Groen models such as TDA/1-40, TDA/1-48, TDC/2, TDC/2-10, TDC/2-20, TDC/3-10, TDC/3-20, TDC/3-24, TDC/3-3, TDC/3-6, TDH-20, TDH-40, TDHC-20, TDHC-40 and where part is applicable.
-
Shaft Handwheel 3/4
Part No. PD66065
$164.28- Use on various Groen models such as: DEE/20, DEE/4, DEE/40, DEE/60, DH-20, DH-60, DH/1-40, DH/DHT-20, DH/DHT-40, DH/DHT-60, DHS-40, DHS/T-40, DHT-20, DHT-60, DHT/1-40 and where part is applicable.
-
Shaft Handwheel 3/4"
Part No. PD38019
$201.45- Shaft
- Used on handwheel
- 3/4"
- Metal
- Commonly used on Groen models such as D20, D40, D60, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40 and where part is applicable.
-
Sight Glass 1-1/4" NPT
Part No. PD12487
$57.65- Sight Glass 1 1/4Npt
- Commonly used on Groen such a : DEES-40, DHS-40, DHS/T-40, TDB-20, TDB-40, TDB/7, TDB/7-20, TDB/7-40, TDBC-20, TDBC-40, TDH-20, TDH-40, TDHC-20, TDHC-40 where part is applicable.
-
SOLENOID GAS VALVE 25V COILS, 1/2"
Part No. PD50061
$471.15- Dual Solenoid Valve
- 24V
- Natural gas
- (G96xxx-17)
- Plastic heads are blue or black)
- Commonly used on Groen such as (2)HY-5G, (2)TRI-RES-20G, BPM-15G, BPM-30G, BPM-40G, BPP-30G, BPP-40G, C/2-G, CC10-G, CC20-G, HY-12GF, HY-12GF(CE), HY-24GF, HY-24GF(CE), HY-5G, HY-6G, SSB-10G, SSB-3G, SSB-5G, TDH-20, TDH-40, TDHC-20, TDHC-40, TRI-RES-20G where part is applicable.
-
SOLID STATE RELAY, 480V, 50A
Part No. PD45043
$558.35- Relay
- Solid state
- 50 Amp
- SPDT
- 480VAC
- High voltage input
- Commonly used on various Groen models such as V Series, XS480/12/3 and where part is applicable.
-
SPREADER/HOLDER, FLAME - NAT
Part No. PD128565
$12.00- Holder Flame Nat Gas
- Commonly used on Groen such a : CHFP/1-3, CHFP/1-4, CHFP/1E-3, CHFP/1E-4, HY-6G where part is applicable.
-
SPRING 31/32" OD
Part No. PD35787.1
$26.88- Spring
- 31/32" O.D.
- Commonly used on Groen models: TDC/2, TDC/3, TDO, TDO/1
-
SPRING, HIGH PRESSURE
Part No. PD11033
$195.51- Spring High
- Commonly used on Groen such a : CFPC-3, CFPC-4, CFPC/2-3, CFPC/2-4, CHFP/1-3, CHFP/1-4, CHFP/1E-3, CHFP/1E-4, CHFP/2-3, CHFP/2-4, CHFP/2E-3, CHFP/2E-4, FPC/1, FPC/1-2, FPC/1-3, FPC/1-4, FT, HFP-2E-4, HFP/2-2, HFP/2-3, HFP/2E-2, HFP/2E-3, HFP/2E-4, MW/FPC, MW/FPC/1, MW/FT, MW/GT, NFPC-3, NFPC-4, NHFP(E)-3, NHFP(E)-4, NHFP-4, PT where part is applicable.
-
Steam Pressure Control, 1/4" NPT Female
Part No. PDG11476
$540.00- Steam Pressure Control
- 1/4" NPT Female
- Penn-Johnson
- Use for Series (Prior to Feb. 6, 1995): AH, CAH, DAH, DCAE, DCEE, DEE, DH, EE, EM, & HH that use Penn-Johnson Control.
-
Steam Safety Valve 3/4" NPT, Chrome
Part No. PDG11268
$436.52- Steam Safety Valve -3/4" NPT, Chrome
- Commonly used on Groen such as : TD/2, TD/2-40, TDC/2, TDC/2-10, TDC/2-20, TDC/3-10, TDC/3-20, TDC/3-24, TDC/3-3, TDC/3-6, TDO, TDO/1, TDO/1-32, TDO/1-64, TDO/1-72 where part is applicable.
-
STEM 2" VALVE (non foodgrade) WHITE HEAD
Part No. PD128599
$213.41- Draw-off Faucet Stem
- 6" Long
- With o-ring
- Stainless steel
- Square tip end
- 0.3" square knob mount
- 10-24 threads for end nut
- For 2" draw off faucet valve
- White head, squared tip end.
-
STEM, 2" Groen (not foodgrade, white)
Part No. PD45698
$242.15- Faucet Stem
- 6" Long
- Stainless steel
- For 2" draw off faucet valve
- For Groen models: AE/1-100, AE/1-20, AE/1-40, AE/1-60, AE/1-80, AH-20, AH-40, AH-60, AH-80, D20, D40, D60, DEE/20, DEE/4, DEE/40, DEE/60, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40, EE-100, EE-20, EE-40, EE-60, EE-80, FT, MW/D, MW/DT, MW/FT, PT
Note: White head plunger stems are not approved for foodgrade use. Our black head stem plunger is food grade.
-
STEM, S/S - FOR 3" VALVE
Part No. PD117911
$521.24- Stem
- Stainless Steel
- For 3" draw off valve
- Black head
- Used on various commercial kitchen kettles.
-
STEM, S/S VALVE, 1-1/2" (fits Groen) *
Part No. PD128641
$210.02- Stem for draw-off faucet, 1-1/2"
- Whitehead
- Stainless Steel
- Comes With O-Ring
- 10-24 threads for end nut
- Square handwheel mount hole, .03"
- Used on various Groen models ONLY such as D20, D40, D60, DEE/20, DEE/4, DEE/40, DEE/60, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40, FT, MW/FT, PT and where part is applicable.
- Series: AE, AH, CAH, CDC, D, D2, DAH, DCAE, DCEE, DEE, DH, DL, DT, DTA, EE, EM, FT, GPT, GT, HH, PT, HFP.
Note: White plunger stem models are not approved for food grade. Our black head stem plunger is.
-
STEM, S/S VALVE, 1-1/2" GROEN
Part No. PD45699
$210.02- Stem For draw off faucet, 1-1/2"
- Stainless Steel
- Comes With O-Ring
- 10-24 threads for end nut
- Square handwheel mount hole, .03"
- Used on various Groen models ONLY such as: D20, D40, D60, DEE/20, DEE/4, DEE/40, DEE/60, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40, FT, MW/FT, PT and where part is applicable.
- Series: AE, AH, CAH, CDC, D, D2, DAH, DCAE, DCEE, DEE, DH, DL, DT, DTA, EE, EM, FT, GPT, GT, HH, PT, HFP.
Note: White plunger stem models are not approved for food grade. Our black head stem plunger is.
-
STEM, S/S VALVE, 2" (non foodgrade)
Part No. PD117897
$213.41- Faucet Stem
- 6" Long
- Stainless steel
- For 2" draw off faucet valve
- This white head is not foodgrade
- For Groen models: AH-20, AH-40, AH-60, AH-80, D20, D40, D60, DEE/20, DEE/4, DEE/40, DEE/60, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40, EE-100, EE-20, EE-40, EE-60, EE-80, FT, MW/D, MW/DT, MW/FT, PT and where part is applicable.
Note: White plunger stem models are not approved for food grade. Our black head stem plunger is.
-
STRAINER, KETTLE, SS
Part No. PD127847
$162.54- Kettle Strainer
- Stainless Steel
- 0.190" holes
- 9" diameter
- 7 1/2" long handle
- Commonly used on various Cleveland models such as KGL, KDL, ,KGL40-T and only where part is applicable.
-
STRAINER, PERFORATED, 9 INCH DIAMETER
Part No. PD10731
$557.66- Stainless steel
- Kettle strainer
- 9" diameter
- 0.19" holes
- 7-1/2" handle length
- For 25 & 40 gallon kettles
- 1/4" holes
- Commonly used on Groen models: AE/1-100, AE/1-20, AE/1-40, AE/1-60, AE/1-80, FT, HH/4, HH/4E, MW/FT, PT and where part is applicable.
-
Switch Pressure 1/4 Npt
Part No. PD10913
$540.00- Switch Pressure
- Range 20 - 50 PSI
- 1/4" NPT
- Commonly used on various Groen such as DEE/4-20, DEE/4-40, DEE/4-60, DEES-40, DH-20, DH-60, DH-80, DH/1-40, DH/INA/2-100, DHS-40, DHS/T-40, DHT-20, DHT-60, DHT-80, DHT/1-40, HH/4, HH/4E, TDB-20, TDB-40, TDB/7, TDB/7-20, TDB/7-40, TDBC-20, TDBC-40, TDH-20, TDH-40, TDHC-20, TDHC-40 and only where part is applicable.
-
SWITCH PRESSURE 1/4 NPT
Part No. PD38465
$292.77- Commonly used on Groen models: AH-20, AH-40, AH-60, AH-80, AH/1E-100, AH/1E-20, AH/1E-40, AH/1E-60, AH/1E-80, AHS-40
-
SWITCH, MERCURY
Part No. PD128564
$130.85- Mercury Switch
- Standing Pilot
- Used on various Groen models such as CHFP, DAH, HFP, NHFP, BPM-15GS, BPM-30GS, BPM-40GS, CHFP/1-3, CHFP/1-4, CHFP/1E-3, CHFP/1E-4, CHFP/2-3, CHFP/2-4, CHFP/2E-3, CHFP/2E-4, HFP-2E-4, HFP/2-2, HFP/2-3, HFP/2E-2, HFP/2E-3, HFP/2E-4, NHFP(E)-3, NHFP(E)-4, NHFP-4, TA/2, TDB-20, TDB-40 and only where part is applicable.
-
SWITCH, MICRO LEAF
Part No. PD123808
$31.30- Position On/Off
- 15.1A
- 277/250V/125V
- Terminals, 3
- Terminal Size 3/16"
-
-
SWITCH, ON/OFF TOGGLE
Part No. PD123811
$48.55- Position On/Off
- 12A-250V/20A-125V
- Terminals: 2
- Terminal Size 1/4"
- Commonly Used on Vulcan Hart Models: ECO4D, ECO4S, ECO6D, GCO4C, GCO4D, GCO4S, VC4EC, VC4ED, VC4ES, VC6EC, VC6ED, VC6ES
-
-
SWITCH, ON/OFF TOGGLE
Part No. PD43365
$22.61- Toggle Switch
- Position On/Off
- 10A-250V/15A-125V
- Terminals: 2 screw type
- 3/4HP
- 120-240VAC
-
SWITCH, PRESSURE
Part No. PD117867
$258.87- Steam control
- pressure switch
- 20-50 PSI
- SPDT
- 1/4" MPT
- 1/4 Tab terminals (2)
-
Thermocouple, 36"
Part No. PD40095
$61.86- Thermocouple
- 36" Capillary
- 20-30 MV
- Stainless Steel Tip
- Removable Sheath
- Commonly used on Groen models such as AH/1-20, AH/1-30, AH/1-40, AH/1-80, AH/1 E, DHT-20 and where part is applicable.
-
THERMOSTAT (350F, 24" CAP,125V)
Part No. PD235641
$483.74- Thermostat
- 350 degrees F maximum
- SPST
- 24" capillary
- 125V
- Dipsealed G1
- 3/8" stuffing box
- 3/8 x 3-5/8" bulb
-
THERMOSTAT 100-290 F -
Part No. PD44203
$189.08- K-Type Thermostat
- 100-290 degrees F
- 8" long coiled bulb
- 18" capillary
- Dip sealed
- Used on various Groen models such as AH-20, AH-40, AH-60, AH-80, AH/1E-100, AH/1E-40, AH/1E-60, AH/1E-80, AHS-40, EE-100, EE-20, EE-40, EE-60, EE-80, TDB-20, TDB-40, TDB/6, TDB/7, TDB/7-20, TDB/7-40, TDBC-20, TDBC-40, TDH-20, TDH-40, TDHC-20, TDHC-40, and where part is applicable.
-
THERMOSTAT ADAPTER
Part No. PD50430
$10.20- Commonly used on Groen models:AH-20, AH-40, AH-60, AH-80, AH/1E-100, AH/1E-20, AH/1E-40, AH/1E-60, AH/1E-80, AHS-40, BPM-30G, BPM-30GS, BPM-40G, BPM-40GS, BPP-30G, BPP-40G, TDB/7, TDB/7-20, TDB/7-40
-
Thermostat K, 100-290 F
Part No. PD11021
$203.55- Thermostat
- 100-290 F
- K type
- Coiled bulb 8"
- Capillary 48"
- Size 3/8" MPT
- Stuff box dip sealed
- Commonly used on various Groen models such as AH-20, AH-40, AH-60, AH-80, AH/1E-100, AH/1E-20, AH/1E-40, AH/1E-60, AH/1E-80, AHS-40, EE-100, EE-20, EE-40, EE-60, EE-80, TDB-20, TDB-40, TDB/6, TDB/7, TDB/7-20, TDB/7-40, TDBC-20, TDBC-40, TDH-20, TDH-40, TDHC-20, TDHC-40 and where part is applicable.
-
THERMOSTAT, HIGH LIMIT
Part No. PD35279.1
$252.08- Hi Limit Thermostat
- Disc type Fenwall
- 15" wire leads
- Temperature fixed 275 degrees F
- Panel mount
- 1-15/16" mount centered
- Use for Groen models TDB
-
Transformer
Part No. PD53296
$56.98- 40A
- 208/240V
- Used on various Groen models such as TDBC-20, TDBC-40 where part is applicable
-
TRANSFORMER 75 VAC
Part No. PD53360
$96.33- 75VAC
- Use on various Groen models such as AH/1E-100, AH/1E-20, AH/1E-40, AH/1E-60, AH/1E-80, HY-6SG and where applicable
-
TRUNION WASHER
Part No. PD35725.1
$44.64- Washer Trunnion
- Commonly used on Groen such a : MW/D, MW/DT where part is applicable.
-
Tube Water Level, Red Line, White
Part No. PD10723.3
$27.82- Water Level Tube
- Glass Red Line
- 5/8 X 4-3/4
- Commonly used on Groen models such as: 100E-KLS, 20E-KLS, 20E-KLT, 40E-KLS, 40E-KLT, 60E-KLS, 60E-KLT, 80E-KLS, AE/1-100, AE/1-20, AE/1-40, AE/1-60, AE/1-80, AH-20, AH-40, AH-60, AH-80, AH/1E-100, AH/1E-20, AH/1E-40, AH/1E-60, AH/1E-80, AHS-40, DEE/4-20, DEE/4-40, DEE/4-60, DH-20, DH-60, DH-80, DH/1-40, DHT-20, DHT-60, DHT-80, DHT/1-40, EE-100, EE-20, EE-40, EE-60, EE-80, HH/4, HH/4E, TDB/6 and where applicable.
-
-
Valve body Assembly
Part No. PD43343
$1,740.38- This Part No Longer Available.
- Valve body assembly
- Includes
- Valve assembly; 1, 4 & 6 qt (pre 1957 obsolete)
- Stem assembly; 1,4,6 qt (pre 1957 obsolete)
- Bonnet; 1,4, 6 qt (pre 1957 obsolete)
- Packing ring
- Packing nut
- Handle, 2" diameter
- Commonly used on Groen models such as TDA, TDA/1 and where part is applicable.
-
Valve Handwheel
Part No. PD43321
$44.84- Valve handwheel
- Commonly used on Groen such as : MW/D, MW/DT, TDA, TDA-10, TDA-20, TDA/1-40, TDA/1-48, TDC/2, TDC/2-10, TDC/2-20, TDO, TDO/1, TDO/1-32, TDO/1-64, TDO/1-72 where part is applicable.
-
Valve Safety 50 PSI 1/2 NPT
Part No. PD31502
$201.12- STEAM SAFETY VALVE
- 1/2 inch NPT
- 50 PSI
- 339 LBS/HR
- Chrome Plated
- Commonly used on various Groen Kettle Models such as D20, D40, D60, DEE/20, DEE/4, DEE/40, DEE/60, DH-20, DH-60, DH/1-40, DH/DHT-20, DH/DHT-40, DH/DHT-60, DH/DHT-80, DHS-40, DHS/T-40, DHT-20, DHT-60, DHT/1-40, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40, TDB/7, TDB/7-20, TDB/7-40, TDBC-20, TDBC-40, TDH-20, TDH-40, TDHC-20, TDHC-40 and only where part is applicable.
-
VALVE, DRAW-OFF - 3" S/S
Part No. PD45879
$2,439.26- Draw Off Kettle Valve
- 3"
- Stainless Steel
- Commonly used on Groen models such as D20, D40, D60, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40, FT, MW/D, MW/DT, MW/FT, PT and where part is applicable.
- Must be brazed to unit.
-
VALVE, DRAW-OFF - SS 2" W/O HANDLE
Part No. PD117917
$1,299.46- Draw Off Valve
- 2" Valve
- Stainless steel construction
- Complete
- Without Handle
- Faucet must be brazed to unit.
- Commonly used on various kettles where part is applicable.
-
VALVE, GAS SAFETY - 24V 1/2"
Part No. PD113944
$319.17- Gas In 1/2" NPT
- Gas Out 1/2" NPT
- Type Nat
- BTU 225,000
- Operator 24V
- Commonly used on Groen such as : HFP-2E-4, HFP/2-3, HFP/2E-2, HFP/2E-3, HFP/2E-4, NHFP(E)-3, NHFP(E)-4, NHFP-4 where part is applicable.
-
VALVE, RELIEF, 30 PSI
Part No. PD33137.5
$194.51- Safety Relief Valve
- 30 PSI
- 1/2 NPT
- Commonly used on Groen models such as AH/1E-100, AH/1E-20, AH/1E-40, AH/1E-60, AH/1E-80, AHS-40, EE-100, EE-20, EE-40, EE-60, EE-80, HH4 (after 8-1-1992) and where part is applicable.
-
Valve, Safety 30 PSI
Part No. PD37990
$331.28- Valve Safety
- 30 PSI
- 3/4" MPT x 3/4 FPT
- Commonly used on Groen kettles such as : AE, AH, DAH, DAHHH/4, HH/4E, DCAE, DCEE, EE, EM, HH and where part is applicable.
-
VALVE, STEAM SAFETY - 3/4"
Part No. PD117840
$248.34- Steam Safety Relief
- 30 PSI
- 550 Lbs/Hr
- Chrome
- 3/4" NPT
-
VALVE, STEAM SAFETY - 3/4"
Part No. PD117875
$370.13- Steam Safety Relief
- 50 PSI
- 625 Lbs/Hr
- Chrome
- 3/4" NPT
-
VALVE-DRAIN 1/2 ID 5/8 OD 24VDC
Part No. PD12227
$401.79- Valve Drain 1/2 Id
- Commonly used on Groen such a : (2)HY-3E, (2)HY-5E, CC10-E, CC10-G, CC20-E, CC20-G, HY-12E, HY-24E, HY-3E, HY-5E, HY-6E, HY-6G(CE), SSB-10E, SSB-10G, SSB-3E, SSB-3G, SSB-5E, SSB-5G where part is applicable.
-
-
Washer Lock 1/2
Part No. PD40185
$7.78- Washer Lock 1/2
- Commonly used on Groen such as : DHS-40, DHS/T-40, INA/2-100 TW, TDB-20, TDB-40, TDH-20, TDH-40, TDHC-20, TDHC-40 where part is applicable.
-
Washer Packing
Part No. PD35788.1
$7.86- Washer Packing
- .032
- Commonly used on Groen models: TDC/2, TDC/3, TDO, TDO/1
-
WATER GAUGE
Part No. PD10502
$147.77- Used on various Groen models such as: AH-20, AH-40, AH-60, AH-80, EE-100, EE-20, EE-40, EE-60, EE-80 and where part is applicable
-
WATER GAUGE VALVE, SET
Part No. PD117725
$134.97- Water Glass Gauge Valve Set
- Set of 2
- Used on Various Cleveland Models Such AS: 36CDM16, 36CEM1648, 36CGM16300, 36CSM16
-
WATER LEVEL ASSEMBLY
Part No. PD48129
$3,066.39- Water Level Assembly
- Kit Includes:
- Water Level Housing
- Pressure Gauge
- 2 cartridges
- Water Level Tube
- Hose
- Fittings
- Used on various Groen kettles such as DEE/4-20, DEE/4-40, DEE/4-60 and where part is applicable.
-
WATER LEVEL CONTROL 24V
Part No. pd42811
$417.09- Used on Various Groen Models Such As AH/1E-100, AH/1E-20, AH/1E-40, AH/1E-60, AH/1E-80, AHS-40, DH/DHT-20, DH/DHT-40, DH/DHT-60, DH/DHT-80, TDBC-20, TDBC-40, TDH-40, TDHC-20, TDHC-40
-
WATER TREATMENT KIT FOR KETTLES
Part No. PD35493.1
$309.41- Water Treatment Kit
- An absolute must when replacing distilled water in kettles.
- 1 Qt
- Can only ships ground service.
- Commonly used on Groen models AH-20, AH-40, AH-60, AH-80, AH/1E-100, AH/1E-20, AH/1E-40, AH/1E-60, AH/1E-80 and where part is applicable.
-
-
WING NUT - S/S
Part No. PD32565.1
$4.11- Handle Locking Nut
- For 1-1/2" and 2" Draw Off Faucet
- Commonly used on Groen models such as AH-20, AH-40, AH-60, AH-80, AH/1E-100, AH/1E-20, AH/1E-40, AH/1E-60, AH/1E-80, AHS-40, D20, D40, D60, DEE/20, DEE/4, DEE/40, DEE/60, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40, EE-100, EE-20, EE-40, EE-60, EE-80, FT, MW/FT, PT and where part is applicable.
-
Y Strainer 1/2 NPT
Part No. PD45126
$208.86- Y strainer
- 4" length
- 3" wide
- 2" height
- Optimizes performance
- Commonly used on various Groen models such as MW/D, MW/DT, TD/2, TD/2-40, TDA, TDA-10, TDA-20, TDA/1-40, TDA/1-48, TDC/2, TDC/2-10, TDC/2-20, TDC/3-10, TDC/3-20, TDC/3-24, TDC/3-3, TDC/3-6, TDO, TDO/1, TDO/1-32, TDO/1-64, TDO/1-72 and where part is applicable.