Gas Fittings
-
1/4 x 1/8 REDUCER BUSHING
Part No. PD114357
$4.15- Reducer Bushing
- Brass
- Size 1/4" x 1/8" CCT
- FTP hex bushing
-
Black Steel Hex Bushing 3/4 x 3/8 Female
Part No. PD56326
$2.88- Black Steel Hex Bushing
- 3/4 male x 3/8 female
- 100% pressure tested
- Not for use with drinking water
- Male thread ends
- Use for above ground gas, LP and air applications.
- Not for underground use.
-
-
BREAKAWAY NUT & SLEEVE, 7/16"
Part No. PD38140
$62.65- Breakaway Ferrule
- Gas related component
- Nut and sleeve
- 7/16"
- Brass
- Sold as each
-
BUSHING, REDUCER - 1/2 x 1/4
Part No. PD114360
$17.25- Reducer Bushing
- Brass
- Size 1/2" x 1/4" CCT
- Flush
-
Bushing, Reducer - 1/2 X 3/8
Part No. PD114361
$10.29- Brass Face Bushing
- Flush Bushing
- 1/2" MPT X 3/8" FPT
- Commonly used on various Vulcan and Hobart models such as 36SB, 36SBI, FHB1F, FHBI1, FHBIO, FHBO1, HB1, HB1FC, HB2, HBI1, HBI2, VBB2, VBI2, VIB2, VIR2, VIR36, VIR36F, VIR36FS, VIR36S, VRB36, VRB36F, VRB36FS, VRB36S, VSB26I, VSB34IR, VSB34R, VSB36, VSB36IR, VSB36R and where part is applicable.
-
BUSHING, REDUCER - 3/4 x 1/2, FLUSH
Part No. PD114362
$16.88- Reducer Bushing
- Size 3/4" MPT x 1/2" FPT
- Steel face
- Zinc plated
-
-
BUSHING, REDUCER, BRASS 3/4 x 3/8
Part No. PD114363
$16.88- Reducer Bushing
- Brass
- Size 3/4" x 3/8" CCT
- FPT hex bushing
-
-
-
Elbow, Gas, 3/4
Part No. PD46013
$9.59- Gas Elbow
- 3/4" x 3/4"
- Black iron
- 90 degree street elbow
- Male-Female
-
Nipple
Part No. PD43607
$17.60- Nipple
- Commonly used on Vulcan model C24EA and where part is applicable
-
-
-
-
Nipple Black Steel 1/2 x 2
Part No. PD56325
$8.78- Black Steel Nipple
- 1/2 x 2"
- 100% pressure tested
- Rated 150 psi
- Not for use with drinking water
- UL and FM listeds
- Varnish coat
- Male thread ends
- Use for above ground gas, LP and air applications.
- Not for underground use.
-
Nipple Close 1/2 Ips Brass
Part No. PD25181
$18.56- Close Nipple
- 1/2 IPS
- Brass
- Commonly used on Market Forge models such as: ET-3E, ET-5E, ET-6E, 2A, 2A-Plus-D, 2A-Plus-E, 2A-Plus-G, 2A-Plus-SC, 3A, 3A-Plus-D, 3A-Plus-E, 3A-Plus-G, 3A-Plus-SC, A-Plus-D, A-Plus-E, A-Plus-G, A-Plus-SC, MF-2A, MF-2A-Plus-D, MF-2A-Plus-E, MF-2A-Plus-G, MF-2A-Plus-SC, MF-3A, MF-3A-Plus-D, MF-3A-Plus-E, MF-3A-Plus-G, MF-3A-Plus-SC and where applicable.
-
Nipple, 1/2 Close x 1"
Part No. PD46968
$1.55- Close Black Nipple
- 1/2" x 1"
- 150 psi
- Male threaded connection
- Black steel
-
NUT & FERRULE, PILOT 3/16" CCT, REDUCER
Part No. PD114154
$17.39- Pilot Nut & Ferrule
- Conversion kit
- Converts 1/4" CCT pilot to 3/16" CCT tubing
- Brass
- Pilot nut is threaded to fit a 1/4" pilot and it has a 3/16" hole
-
REDUCER FITTING 1/4" CCT to 3/16" CCT
Part No. PD44722
$12.24- Reducer Fitting with Ferrule
- Brass
- 3/16" CCT
- Allows you to replace a male end 1/4" tubing line with 3/16" tubing.
- Male threads are for 1/4" CCT female opening, but Ferrule and hole size are 3/16".
- Used where part is applicable.
-
Reducing Elbow Black Steel 3/4 x 1/2 90?
Part No. PD56324
$3.31- Black Steel Elbow 90°
- 100% pressure tested
- Rated 300 psi max at 150°F or 150 psi at 300°F
- Not for use with drinking water
- UL and FM listed
- Use for above ground gas, LP and air applications.
- Not for underground use.