Exhaust Hood Components
-
-
DRAIN, CANOPY HOOD
Part No. PD126542
$30.78- Canopy Hood Drain
- Fits 7/8" Hole
- Use with 1/2" I.D. Hose Or 3/8" O.D. Tubing
- Lok Nut & Washer Included
- Nickel Plated Brass
- Ideal For Use with Grease Tray
-
Exhaust Hood Filter Removal Tool
Part No. PD126538
$105.61- Makes the cumbersome job of reaching and removing filters a simple operation and eliminates unsafe removal procedures. Designed to be used with most major brand hood filters.
- Fork constructed of nickel plated steel
- Assembles in less than a minute
- Fasteners included
- Lifting prongs adjust from 9-3/4" to 15" (24.77cm to 38.10cm) across to accommodate any filter brand or size
- 10-3/4" x 14-3/4" (27.30cm x 37.47cm) fork insures stable handling
- 5 ft (1.52M) pole
- Fork can be adjusted to five different positions to conform to any hood angle
- Lightweight for ease of handling
- Folds flat for easy storage
- Ground ships only
- UPS/FedEX oversize shipping fees may apply.
-
GLOBE, PLASTIC COATED GLASS, REF
Part No. PD125430
$31.06- Plastic Coated Glass Globe Only
- 3-1/4" diameter x 6-3/4" long
- Use for refrigeration use only.
- Not for use in kitchen exhaust hood applications.
-
Grease Duct Access Door 10-1/2" x 10-1/2
Part No. PD126539
$172.10- Grease Duct Access Door
- Outside Dimension 10-1/2" x 10-1/2"
- For Actual Duct/Opening 7" x 7"
- U.L. Listed & approved
- Grease Tight — Air tight
- Rugged all steel construction
- Fire proof
- Easily installed into existing ductwork
- No bolts penetrate interior of duct
- Hi-temp resistant gasket
- Made in USA
- Meets all mechanical codes & NFPA 96 requirements
-
Grease Duct Access Door 10-1/2" x 15-1/2
Part No. PD126540
$201.21- Grease Duct Access Door
- Outside Dimension 10-1/2" x 15-1/2"
- For Actual Duct/Opening 7" x 12"
- U.L. Listed & approved
- Grease Tight — Air tight
- Rugged all steel construction
- Fire proof
- Easily installed into existing ductwork
- No bolts penetrate interior of duct
- Hi-temp resistant gasket
- Made in USA
- Meets all mechanical codes & NFPA 96 requirements
-
Grease Duct Access Door 15-1/2" x 15-1/2
Part No. PD126541
$209.30- Grease Duct Access Door
- Outside Dimension 15-1/2" x 15-1/2"
- For Actual Duct/Opening 12" x 12"
- U.L. Listed & approved
- Grease Tight — Air tight
- Rugged all steel construction
- Fire proof
- Easily installed into existing ductwork
- No bolts penetrate interior of duct
- Hi-temp resistant gasket
- Made in USA
- Meets all mechanical codes & NFPA 96 requirements
-
HOOD CLEANING KIT
Part No. PD242824
$49.19- Exhaust hood cleaning kit
- Includes:
- Cloth cleaning pad
- Swiveling head
- Pole
- 18 1/2" x 5 1/2" Cleaning pad
- 60" Pad
- Aluminum pole
- Exhaust hood cleaning kit
-
Hood Curtains
Part No. PD42918
$140.18- Hood curtain
- Hangs from hood and helps trap smoke so exhaust more efficiently.
- Helps control heat and contain it under hood zone.
- Heat resistant
- 4 foot long with EZ slide rail
- Curtains are: 2 feet in length x 6 inches wide x 1/8 inch thick
- Hood curtain
-
ISLAND BOX EXHAUST HOOD, SS 10'X 6'X 18"
Part No. PD17637
$0.00- ISLAND BOX EXHAUST HOOD
- SS
- 10' x 6' x 18"
-
-
OVEN EXHAUST HOOD W/MAKE UP AIR 6' X 8'
Part No. PD17638
$0.00- Oven Exhaust Hood
- With make up air
- 6' x 8' x 24" deep
-
Pan, SS, Solid, 1/3 Size x 4"D
Part No. KS101718
$57.80- Pan
- Grease
- Stainless steel
- Solid
- 1/3 Size X 4"D
- 1 ea
- 3-3/4 L x 12-3/4 W x 4 D
- Heavy duty
- Constructed of 18/8 stainless steel.
- 22 Gauge
- NSF certified
-
PROTECTOR, ACOUSTICAL CEILING
Part No. PD244541
$52.73- Acoustical Ceiling Protector
- Protects Tiles & Grids from Daily Condensation, Dirt, Dust, & Moisture caused by HVAC Grills
- Doesn't Affect Room Temp
- Easy to Install
- 23" x 23"
- Clear Plastic
-
Pulley, Die Cast 2" x 1/2", 5/8"
Part No. PD56553
$18.68- Sectional Pulley
- Belt Width: 1/2 in.
- Belt section A
- Product Material: Zinc Die Cast
- Groove Type: V-Groove
- Bore Size: 5/8 in.
- Outer Diameter: 2 in.
- Limited warranty
-
-
Switch, on-off control
Part No. PD4282
$80.00- Exhaust hood fan switch
- Controls the fan speed, on/off
- Pilot switch
- With pilot light
- 120/277 volt
- 20 amp
- The image might not be directly indicative of the actual switch in appearance.
-
TENSIONER, HOOD BELT
Part No. PD47181
$116.58- Tensioner
- Hood fan belt
- Commonly used on exhaust hoods.
-
TRAY, GREASE, with bracket
Part No. PD126543
$77.36- Removable Grease Tray & Bracket
- Tray is 7" Wide x 6-3/8" Deep
- Mounts on Canopy @ End of Grease Trough
- Tray Slides Out For Easy Cleaning
- Stainless Steel
-
-
-
V BELT 29" Duralflex GL
Part No. PD47185
$11.51- V Belt, Smooth
- Duraflex GL
- 29"
- Anti-static, oil and heat resistant
- Commonly used on commercial kitchen exhaust hood fan motors where part is applicable.