InstaCut Parts
-
3/8" DICE INSTA CUT 3.5 TOP ASSEMBLY
Part No. PD26330
$213.13- PUSHER HEAD, BLOCK AND BLADE ASSEMBLY INCLUDED
-
-
Blade Assembly, 3/16"
Part No. PD213012
$97.24- 3/16" blade spacing
- 16 blades in cartidge
- Commonly used on models: INSTASLICE
-
BLADE ASSEMBLY, 6-SECTION
Part No. PD46651
$48.87- Blade Assembly
- 6 Section
- W/ Screws
- Used on various Vollrath/Lincoln/Redco models such as 606N, 808N, COREMASTER, GREAT WEDGER, REDI WEDGE, WEDGEMASTER and where part is applicable.
-
Blade Assembly, 7/32"
Part No. PD213035
$86.11- 7/32" blade spacing
- 13 blades in cartridge
- Commonly used on models: InstaSlice
-
Blade, Scalloped 1/4" Assembly
Part No. PD213013
$88.66- Scalloped Blade Assembly
- 1/4" blade spacing cut
- 12 blade cartridge
- 4-3/4" x 9"
- 2 rods
- Commonly used on Lincoln Redco models: INSTASLICE, TOMATOR SLICER; 15000, 15102, 15103, 15104, 15105.
-
Bumper
Part No. PD13196
$7.01- Bumper
- Use for Dicer-Wedger
- Commonly used on Vollrath models such as 15000, 15005, 15006, Instacut 3.5, Instacut 3.5W, Instacut 5.0, Instacut 5, Insta Slice 15000 and where part is applicable.
-
-
HANDLE, D (RUBBER COATED)
Part No. PD236657
$78.03- Rubber Coated Handle
- Used on various Vollrath models such as 15000, INSTABLOOM, INSTACUT 3.5W and where part is applicable.
-
HANDLE,PUSHER HEAD (N/S,3.5)
Part No. PD236649
$73.61- Pusher head with handle and bearings
- Used on various Lincoln Redco and Vollrath models such as 15000, 15005, 15006, INSTACUT 3.5
-
PULL PIN W/RING 1-1/4" LONG
Part No. PD10539
$16.88- Pull Pin
- Commonly used on Vollrath Redco models such as 15000, 4400N, Instabloom, Instacut 3.5W, Lettuce King IV and where part is applicable.
-
SUCTION FOOT
Part No. PD50646
$6.60- Suction Foot
- Rubber
- Threaded stud in top to screw into unit base.
- Advise to replace all for at a time for consistency of balance and safety.
- Commonly used on Vollrath Redco models: Insta Cut 3.5, 5; 15000, Wedger 15005, 15006, Insta Bloom Onion Bloomer 550, 550N, 15600; Dicer 1500, 15001, 15002, 1854N, 1855N, 1856N.