Robot Coupe R2B 2-button unit food processor replacement parts
-
Adapter Plate, EM W/Screws
Part No. PD162411
$11.38- Adapter Plate
- Comes with 4 Screws
- Commonly used on Robot Coupe models such as R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra (serial number series - R2Uxxxxx Also, 231xxx and where part is applicable.
-
-
BEARING, TOP OR BOTTOM, SEALED 6204
Part No. PD1100950
$62.84- (For the A O Smith motors only). Sealed Bearing
- 1-9/16 diameter x 11/16 x 7/16"
- Top or bottom bearing
- Used on various Robot Coupe models such s R2 (Old Style), R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra
-
Bottom Cushion Bushing
Part No. PD38340
$28.68- Bottom Cushion Bushing
- Commonly used on Robot Coupe models such as R2B, R2N, R2N Ultra and only where applicable.
-
BREAKER, 8 Amp, Push to Reset
Part No. PD3729410
$44.45- Breaker
- 8 amp
- 250 V AC Max
- 50 V DC Max
- Comes with screw on nut
- Used on Various Robot Coupe models such as R100, R100 PLUS, R2 old style, R2N, R2N Ultra, R2N-ULTRA and only where part is applicable.
-
-
Capacitor, Motor
Part No. PD50075
$66.63- Start Capacitor
- Commonly Used on various Robot Coupe models such as R2B, R2N, R2N Ultra, R2N-ULTRA (Not R2 Old Style, twist top) and only where part is applicable.
-
CAPACITOR, ROBOT COUPE R222
Part No. PD30252
$66.60- Capacitor
- 115/125VAC
- 50/60HZ
- Commonly used on Robot Coupe model: R2U and where part is applicable.
-
COMPLETE MOTOR BASE ASSEMBY
Part No. PD25581
$1,213.88- Base Assembly, complete, w/motor CALL FOR QUOTE
-
CORD, W/PLUG R240, ROBOT COUPE
Part No. PD2550510
$53.63- Cord with plug
- SJTOW type
- 120 V
- 13 Amp
- 6' cord
- 3 wire
- 16 gauge
- Commonly used on various Robot Coupe models such as CL 30, CL 50, CL 52, CL 52-D, R 100, R 100 Plus, R 300, R100 PLUS, R100B, R100BCLR, R2B, R2N, R2N Ultra, R2N-ULTRA, R302 and only where part is applicable.
-
CUTTER BOWL 3 QT, GRAY PLASTIC
Part No. PD3075410
$169.99- Cutter Bowl
- gray plastic
- With handle and on-off pin assembly
- 3 Qt new style (replaces old style 2.5 qt white bowl no handle-other accessories still fit from 2.5 to 3 qt bowl)
- Used on various Robot Coupe models such as R2 old style, R2, R2 Dice, R2 Dicing, R2B, R2N and only where part is applicable.
-
CUTTER BOWL CLEAR, 3 QT, 2.3L
Part No. PD3110710
$121.05- Mixing Bowl with Handle
- 2.3 liter
- OEM authentic, not a counterfeit
- Clear
- Plastic, high impact
- 3 quart
- with handle
- Includes on-off pin assembly
- 9.65 x 11.25 x 7
- Used on various Robot Couple models such as R2, R2N, R2N CLR, R2B-CLR, (R211 European model) and only where the part is applicable.
Buy OEM authentic for employee safety. Buy cheap get cheap.
-
Foot, White (best practice to change 4)
Part No. PD1101010
$9.05- Foot for base
- White in color
- Used on various Robot Coupe models such as R100, R100CLR, R100 Plus, R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart-serial Number 246xxxxx05), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra and where part is applicable.
Note: Best practice is to always replace all 4 feet to ensure the proper balance of the unit and to avoid dangerous vibrations.
-
FRONT PLATE, 2 HOLE
Part No. PD1939910
$31.36- Front Data Plate
- 2 hole
- Dimensions are 6-5/8" x 3-5/8"
- Commonly used on various Robot Coupe models such as R2N and only where part is applicable.
-
LOWER BASE R2(N) ONLY, GRAY
Part No. PD3408710
$172.15- Motor base only
- No base top included.
- No feet included, do not use used feet.
- Used on various Robot Couple models such as R2 old style, R2N, R2 Ultra, R2DICE, R2DICE Ultra and only where part is applicable.
NOTE: When changing the base, be sure to transfer the ETL Label to the new base.
Strongly suggest you purchase this specialize torx screwdriver used to assemble & disassemble, virtually impossible without it.
-
MOTOR SUPPORT SEAL
Part No. PD19350
$28.94- Motor Support Seal
- 1 1/2" Outer Diameter
- Viton
- Used on various Robot Coupe models such as Blixer 2, Blixer 3D, Blixer 4, Blixer 4 Mono, Blixer 4 Tri, Blixer 4 V.V., Blixer 4A, Blixer 4VA, CL-30, J100 Ultra, J80 Ultra, R100, R100 PLUS, R100B, R100BCLR, R101, R101 Plus CB, R101B, R2, R2 Dice, R2 Dicing, R2 Dicing Ultra, R2 Ultra Dice, R2B, R2N, R2N Ultra, R2N-ULTRA, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, R301U, R302, R302V, R401, R401A, R402, R402 V. A, R402 V.V., R402A and only where part is applicable.
-
Motor Support, 3 hole, front plate 3qt*
Part No. PD163005
$228.69- Motor Support
- For 3 qt bowl unit
- Comes with 3 hole front plate for switches
- Comes with 3 screw cover discs
- Commonly used on various Robot Coupe models such as R2N, R2U and only where part is applicable.
-
MOTOR, 1/3 HP, AO Smith
Part No. PD19408
$595.64- Motor Kit w/Seal and Hardware
- Includes capacitor and bearings
- Not for units without push buttons on front of unit
- 120V, 1 Phase, 60HZ
- 1725 RPM
- For units with serial number after 20,000
- Commonly used on Robot Coupe models: R2N, R2N Ultra
-
ON/OFF PIN ASSEMBLY, for 2.5 QT Bowl
Part No. PD1100010
$10.55- ON/OFF PIN ASSEMBLY FOR WHITE OR GRAY 2.5 QT BOWL ONLY (GRAY BOWL HAS NO HANDLES)
- Also used for the continuous feed chute attachment on R2 units
- For clear bowl see PD1415310
- Commonly used on Robot Coupe models: where part is applicable
-
ON/OFF PUSH PIN ROD, 2.5 QT BOWL, CLEAR
Part No. PD1415310
$16.58- ON/OFF pin assembly for 2.5 clear bowl only
- Commonly used on Robot Coupe models: R100, R100CLR, R100 Plus, R2 (Old Style), R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2NCLR (serial Number-244
-
Relay, R2B, R2N Ultra
Part No. PD162049
$49.73- Relay
- Commonly used on Robot Coupe models such as R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra (serial number series - R2Uxxxxx , 231xxx) and only where part is applicable.
-
RUBBER O-RING, BLACK
Part No. PD1939210
$6.24- Rubber O ring
- This is the rubber cover for the micro switch on the top of the base
- Provides motor compartment seal for on/off pin assembly plunger on bowl
- Also replaces previous red O-Ring on some models
- Used on various Robot Coupe models such as R100, R2, R2N, R2U, R4, R4B, R4C, R4N, R4X, R4Y, R60TS, R100 PLUS, R2 Dicing, R2 Dicing Ultra, R2N Ultra and only where part is applicable.
-
S Blade Fine Serrated
Part No. PD25547
$162.24- Fine serrated S blade
- Commonly used on Robot Coupe models: R2, R2N, R2N Ultra, R2N-ULTRA
-
S Blade Smooth Edge (Not a counterfeit)
Part No. PD1099210
$102.98- Authentic OEM S Blade by Robot Coupe
- Longer lasting than counterfiets
- Smooth straight edge 'S' shaped blade
- Tip to Tip measurement is 7-1/4"
- Used on Various Robot Coupe Models Such As R2 (Old Style), R2N (serial number series - R2xxxxx Also, 230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxx ), R2N Ultra, R2N-ULTRA, 247xxxxx03 and only where part is applicable.
-
S Blade, Coarse Serrated
Part No. PD25546
$162.24- Course serrated S blade
- Stainless Steel blade
- Used on various Robot Coupe models such as R2B, R2N Ultra, R2N-ULTRA and only where part is applicable.
-
SAFETY ON/OFF PIN, CLEAR BOWL 3 QT
Part No. PD3294010
$10.90- Safety on/off pin assembly
- for clear bowl 3 qt
- Used on various Robot coupe models such as R2N ,R2B series and only where part is applicable.
-
SAFETY PIN ASSEMBLY, FOR 3 QT GRAY BOWL
Part No. PD3245310
$10.90- Pin Assembly
- Used in handle for on/off control
- This is for the 3 quart gray plastic bowl
- Used on various Robot Coupe models such as R 2 Dicing, R2, R2 Dice, R2 Dicing, R2B, R2N and only where part is applicable.
-
Safety Switch Assembly
Part No. PD1100610
$35.65- Safety Switch Assembly
- Mounts inside unit
- Complete with wire leads and new gasket
- Used on Various Robot Coupe Models such as R100, R100CLR, R100B, R100 Plus, R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR, R2N Ultra, XR2U
This is also used on some 220V 50HZ models.
-
Screw (Base-MS 3.9 x 19), Torx
Part No. PD25525
$4.41- Screw for base
- Torx
- Each
- Commonly Used on various Robot Coupe models such as R2, R2NBlixer 3, R 2 Dicing, R 2 Ultra Dicing, R100 PLUS, R100B, R100BCLR, R2 Dice, R2 Ultra Dice, R2N, R2N Ultra, R2N-ULTRA and only where part is applicable.
Torx Bit Required (Place in search box PD25525)
-
Screw (Motor - MS)
Part No. PD162456
$3.33- Motor Screw (bolt)
- Comes with washer
- (motor support)
- Commonly used on Robot Coupe models: R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra (serial number series - R2Uxxxxx Also, 231xxx and where part is applicable.
-
SCREW COVER
Part No. PD19423
$5.04- Screw Cap Cover
- For screws on motor mount housing
- Plastic
- Legth 3/4" inches
- Width 3/4" inches
- Height 1/8" inches
- Used on various Robot Coupe models such as R 2 Dicing, R 2 Ultra Dicing, R2, R2 Dice, R2 Dicing, R2 Dicing Ultra, R2 Ultra Dice, R2N, R2N Ultra, R2N-ULTRA and only where part is applicable.
-
Strain Relief
Part No. PD162238
$8.05- Strain Relief
- Commonly used on Robot Coupe models: R100, R100CLR, R100 Plus, R101, R101B, R101 Plus, R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra and where part is applicable
-
Switch Assembly, On/Off
Part No. PD162460
$151.45- on/off switch assembly
- For units with on-off switches only (2)
- Commonly used on various Robot Coupe models such as R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2C (serial number series - R2xxxxx Also,-230xxxxx03) and R2B (serial number series - R2xxxxx Also,-230xxxx) and only where part is applicable.