R6 Series (R6N, R6B, R6C)
-
-
BEARING, MOTOR TOP BEARING
Part No. PD30687
$55.04- Motor Top Bearing
- Used on various Robot Coupe models such as Blixer 5V, Blixer 6V, R4N, R4X, R4Y, R6N, R6VN, R6X, R6Y, R8, R8U and only where part is applicable.
-
BEARING, TOP OR BOTTOM, SEALED 6204
Part No. PD1100950
$62.84- (For the A O Smith motors only). Sealed Bearing
- 1-9/16 diameter x 11/16 x 7/16"
- Top or bottom bearing
- Used on various Robot Coupe models such s R2 (Old Style), R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra
-
-
BLADE TOOL ASSEMBLY
Part No. PD2733010
$60.27- Blade tool assembly
- Commonly used on various Robot Coupe models such as R6VN Series D and only where part is applicable.
-
BOWL LID with SEAL
Part No. PD1909410
$205.14- Bowl Lid
- Comes with gray rubber gasket
- New style
- Plastic
- Clear
- Has funnel shaped hole in top
- Commonly used on various Robot Coupe models such as R4N, R4Y, R500, R502 Series E, R502F, R502Y, R6, R6X, R6VN, R6Y Series A, R602V, Blixer 4, Blixer 5, Blixer 6, Blixer 6V, BX4, BX6, RSI BX4V,R 602, R4, R4N SERIES D, R602, R602E, R602V, R602V E, R602Y, R6V, R6VN, WCO250, WCO250C and only where part is applicable.
When using for model R502Y Series E with serial numbers starting with 539 and ending with 03.
-
BOWL MAGNETIC ROD, W/PRESS FIT
Part No. PD3368510
$43.86- Commonly used on Robot Coupe models: R6 series before March 1996
-
Bowl, SS, Limited Supply
Part No. PD162027
$934.51- Bowl, stainless steel.
- With handle
- Use on various Robot Coupe models such as: R6 Series (R6N, R6B, R6C), R6V Series (R6VN, R6VB, R6VC), R6B, R6VB, R6Y and R6Y-1 and where part is applicable.
-
Bowl, Stainless Steel
Part No. PD19100
$1,291.02- Bowl Only
- Stainless Steel
- Handle assembly not sold separately
- Commonly used on Robot Coupe models such as R602E, R602V E, R602Y, R6N, R6V, R6VN, R6Y (Series A) and where part is applicable.
NOTE: Provide Serial Number if you are not positive.
-
Bushing for Spring (k)
Part No. PD162641
$7.05- Commonly used on Robot Coupe models: R6N Series D, R6VN Series D, R6C Series D, R6VC Series D and R6X Series D
-
BUSHING SET WITH BOWL LOCK PIN
Part No. PD28405
$48.42- Bushing Set with Bowl Lock Pin
- Commonly used Robot Coupe models such as R6N and where part is applicable
-
Cap, S Blade
Part No. PD162195
$11.23- Commonly used on Robot Coupe models: R6 Series (R6N, R6B, R6C), R6V Series (R6VN, R6VB, R6VC), R6B, R6VB, R6Y and R6Y-1
-
CONTROL RELAY, RUN 220V
Part No. PD2742050
$78.89- Run Control Relay
- DPST
- 25A
- 220 V AC
- Top flange mounting
- 1/4 in. tab terminals
- 6 pins
- 50/60HZ
- Commonly used on various Robot Coupe models such as CL 60 Bulk, CL 60 Pusher, R10, R10P, R10U, R25T, R25TP, R4, R40T, R40TP, R4N, R4N SERIES D, R6, R602, R602E, R6N, R8, R8U and only where part is applicable.
-
CUTTER BOWL LID
Part No. PD411209
$198.29- This lid is for the R6Y-1 old style
- This lid has a magnet
- Used on various Robot models such as Old Style: R4, R6, R500 and where part is applicable
-
DISC-PLATE STORAGE RACK
Part No. PD1942050
$32.50- Storage Rack
- Metal
- Epoxy coating
- Holds up to 8 food processor discs
- 4 1/2" x 13 1/4" x 2 1/2"
- Prevent blades from hitting each other while in a storage drawer. Protects blade edge.
- Prevent employees from cutting themselves when handling these sharp blades.
- Used on various Robot Coupe models such as CL 30, CL 50, CL 55 Pusher, CL 60 Bulk, CL 60 Pusher, Food Processor, R 100, R 100 Plus, R 300, R 301 Ultra, R100, R100 PLUS, R101, R101 Plus CB, R2 Ultra Dice, R2N, R2N Ultra, R2N-ULTRA, R301 ULTRA, R301 Ultra Dice, R301U, R302, R302V, R4, R401A, R402 V. A, R402A, R4N, R4N SERIES D, R4X, R6, R602, R602E, R6N, R6V, R6VN, R6VN-D, R6X and only where part is applicable.
-
DISCHARGE SLING PLATE
Part No. PD16372
$36.98- Discharge Plate
- Unit has oblong center hole
- 7-1/16" Diameter
- Not for R4X or R4N Series D, CL50 E, CL50 D
- Used on various Robot Coupe models such as R4X or R4N Series A, CL50 Series B, CL50 Series A, CL55 Pusher, CL55 Bulk, CL60 Pusher, CL60 Bulk and where part is applicable.
-
FOOT (FRENCH MODELS ONLY)
Part No. PD2713110
$8.85- Foot
- Rubber
- Gray with threaded stud.
- Exclusively for machines designated as 'French' models.
- Used on models such as R6 series, CL50, CL55, R4X (with toggle front), R4Y (b/4 3-1996 with toggle front) where part is applicable.
- When ordering, include your model and serial number of unit. Non returnable if this info is not provided.
-
Gromet (Elect Cord)
Part No. PD162565
$5.38- Commonly used on Robot Coupe models: R4, R6 Series (R6N, R6B, R6C), R6V Series (R6VN, R6VB, R6VC), R4C, R4X, R6C, R6VC, R6X, R4B, R4Y, R6B, R6VB, R6Y and R6Y-1
-
HINGE PIN BUSHINGS (Pair)
Part No. PD1637110
$12.58- Hinge Pin Bushing
- Sold as a pair
- Used on models such as CL50, CL52, CL55, CL60, R4N, R4X, R502E, R502X, R602E, R6N, R6V, R6VN, R6X
-
HINGE PIN, LID
Part No. PD1637010
$47.50- Hinge Lid Pin
- Dimensions are 10-3/8" X 2-1/2"
- Used on various Robot Coupe models such as R6 Series A & D, R6C, R6N, R6V, R6VN, R6X ONLY, CL30, CL50, CL50E, CL50 Gorurmet, CL50 Ultra E, CL52, CL52 Series D, CL55 Pusher, CL55 Pusher Series D, CL 55 Bulk, CL55 Bulk Series D, CL60 Pusher, CL60 Pusher Series D, CL60 Bulk, R502E, R502X, R602E and where part is applicable .
-
LARGE PUSHER WITH KNOB
Part No. PD38074
$205.28- Large Pusher
- Stainless steel body
- For D machines only
- length is 9"
- Width is 6-3/4"
-
Lckg Bush Set w/Screws
Part No. PD162742
$51.71- Commonly used on Robot Coupe models: R6 Series (R6N, R6B, R6C), R6V Series (R6VN, R6VB, R6VC), R6B, R6VB, R6Y and R6Y-1
-
Locking Pin Knob
Part No. PD162397
$7.65- Commonly used on Robot Coupe models: R6 Series (R6N, R6B, R6C), R6V Series (R6VN, R6VB, R6VC), R6C, R6VC and R6X
-
MOTOR SHAFT PIN, NEW STYLE
Part No. PD1953650
$28.53- Motor Shaft Pin
- New style
- Metal
- Commonly used on Robot Coupe models: Blixer 5V, Blixer 6V, R4N, R4N - 160AE92, R4N SERIES D, R4X, R4Y, R502E, R502X, R502Y, R602, R602E, R602V, R602V E, R602Y, R6N, R6V, R6VN, R6X, R6Y ad where applicable.
- You must have the pin 'press-fit' into the shaft. You cannot use a hammer to set the pin.
- Non-returnable
-
MOTOR SHAFT SEAL
Part No. PD28648
$34.55- Motor Shaft Seal
- Used on various Robot Coupe models such asBlixer 5V, Blixer 6V, R 602, R4, R4N, R4N SERIES D, R4Y, R6, R602, R602E, R602V, R602V E, R602Y, R6N, R6V, R6VN, R6VN-D, R6Y and only where part is applicable.
-
PIN, BOWL, ROBOT COUPE, 102082
Part No. PD2621810
$55.12- Bowl Pin
- Length 6 1/4"
- Plastic
- Gray
- Used on various Robot Coupe models such as BLIXER 6V, R602E, R602V E, R602Y, R6N, R6V, R6VN, R6Y, R6, R602, R602V and only where part is applicable.
-
Pin, Locking
Part No. PD162192
$28.94- Commonly used on Robot Coupe models: R6 Series (R6N, R6B, R6C), R6V Series (R6VN, R6VB, R6VC), R6C, R6VC and R6X
-
-
Pusher Hinge Pin
Part No. PD162377
$136.69- Commonly used on Robot Coupe models: R6 Series (R6N, R6B, R6C), R6N Series A, R6V Series (R6VN, R6VB, R6VC), R6VN Series A, CL50 Series B, R6C, R6C Series A, R6VC, R6VC Series A, R6X and R6X Series A
-
PUSHER KNOB, ROBOT COUPE, 117452S
Part No. PD26507
$23.06- Handle, Pusher
- Black
- Plastic
- Commonly used on various Robot Coupe models such as CL-30, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, R300, R301, R301 Dice, R301 ULTRA, R301 Ultra dice, R302, R302V, R401, R401A, R402, R402 V. A, R402 V.V., R402A, R502E, R502X, R602E, R6N, R6V, R6VN, R6X and only where part is applicable.
-
Robo-Cart *
Part No. PD162147
$636.68- Commonly used on Robot Coupe models: R4, R4N Series A, R4N Series D, R6 Series (R6N, R6B, R6C), R6N Series A, R6N Series D, R6V Series (R6VN, R6VB, R6VC), R6VN Series A, R6VN Series D, R4C, R4C Series A, R4C Series D, R4X, R4X Series A, R4X Series
-
Rod, Mag Flux CF Lead
Part No. PD162673
$47.18- Rod
- Mag flus CF Lead
- Commonly used on Robot Coupe models: R6 Series (R6N, R6B, R6C), R6N Series A, CL50 Series B, R6C, R6C Series A, R6X and R6X Series A.
-
SCREEN KIT, R4NXSY
Part No. PD29770
$14.05- Screen Kit
- Commonly used on Robot Coupe models such as R4N, R4Y (toggle switch), R6 Series (single switch B), R6V series (single dial VBl), R6Y before 1996.
-
Screw
Part No. PD162064
$7.23- Commonly used on Robot Coupe models: R6 Series (R6N, R6B, R6C), R6V Series (R6VN, R6VB, R6VC), CL50 Series B, R6C, R6VC and R6X
-
SEAL, MOTOR SUPPORT
Part No. PD2864720
$29.08- Motor Seal
- 1-3/8" outer x 1" inner x 1/4"
- Used on various Robot Coupe models such as Blixer 5V, BLIXER 6V, R10, R10E, R10P, R10U, R18, R4N, R4X, R4Y, R502E, R502X, R502Y, R602E, R602V E, R602Y, R6N, R6V, R6VN, R6X, R6Y, R8, R8U and only where part is applicable.
-
SERRATED KNIFE ASSEMBLY
Part No. PD40239
$671.31- Serrated Knife Assembly
- Stainless steel
- Commonly used on Robot Coupe models such as R602V, R602V E, R602Y, R6N, R6V, R6VN, R6Y and where applicable.
-
-
Small Pusher (167MM)
Part No. PD41637
$23.83- Small Pusher
- 6-5/8"
- 167 mm
- Use for model CL50 Series B, R6 series where part is applicable.
-
SPACER, BLADE, R6 SERIES
Part No. PD3538010
$100.17- Blade Spacer
- Stainless steel
- 2-7/8" diameter x 1-3/4" opening
- Used on various Robot Coupe models such asR 602, R6, R602, R602E, R602V, R602V E, R602Y, R6V, R6VN and only where part is applicable.
-
Spring
Part No. PD162077
$23.96- Commonly used on Robot Coupe models: R6 Series (R6N, R6B, R6C), R6N Series A, R6N Series D, R6V Series (R6VN, R6VB, R6VC), R6VN Series A, R6VN Series D, CL50 Series B, R6C, R6C Series A, R6C Series D, R6VC, R6VC Series A, R6VC Series D, R6X, R6X S
-
Strain Relief
Part No. PD162249
$8.25- Used on various Robot Coupe models such as: R2 (Old Style), R300, R300 Series B, R300 Series C, R301 Ultra, R301 Ultra Series B, R301 Ultra Series C, R4, R6 Series (R6N, R6B, R6C), R6V Series (R6VN, R6VB, R6VC), R2C (old style), R300 C, R300C Series B, R
-
Stud Bolt, Latch
Part No. PD162378
$34.04- Commonly used on Robot Coupe models: R6 Series (R6N, R6B, R6C), R6N Series A, R6N Series D, R6V Series (R6VN, R6VB, R6VC), R6VN Series A, R6VN Series D, CL50 Series B, CL55 Bulk Series D, CL55 Pusher, CL55 Pusher Series D, CL60 Bulk, CL60 Pusher,
-
SWITCH ON/OFF
Part No. PD1946750
$124.74- On-Off Switch
- Red and Green push buttons
- Spade terminals
- 2.7" x 4.95" x 1.95"
- Commonly used on certain R6 series models, R300 B & C models only where applicable.
-
Switch Support,Mag Sw
Part No. PD162690
$8.85- Commonly used on Robot Coupe models: R6 Series (R6N, R6B, R6C), R6C, R6X, R6B, R6Y, R6Y-1, CJ120 and CJ120A
-
VOLTAGE RELAY, 220V
Part No. PD26600
$282.98- Voltage Relay
- 220 VAC
- Used on various Robot Coupe models such as Blixer 5, Blixer 6, BX4, BX6, CL60, R4N, R502E, R602E, R6, R6N, R8, R8U, C 120, C 200, R4N SERIES D, R602 and only where part is applicable
-
Washer, Plastic
Part No. PD162334
$5.22- Commonly used on Robot Coupe models: R6 Series (R6N, R6B, R6C), CL55 Bulk Series D, CL55 Pusher, CL55 Pusher Series D, CL60 Bulk, CL60 Bulk Series D, CL60 Pusher, CL60 Pusher, CL60 Pusher Series D and R6C