R301 ULTRA
-
Baffle Plate
Part No. PD162205
$55.46- Commonly used on Robot Coupe models: R300, R301 Ultra, R300 C, R301 Ultra C, R300B and R301 Ultra B
-
Baffle Plate
Part No. PD162206
$36.32- Baffle Plate
- White
- Used on various Robot Coupe models such as R301 Ultra, R301 Ultra Series B, R301 Ultra C, R301 Ultra C Series B, R301 Ultra B, R301 Ultra B Series B, BX3 Blixer and Blixer 3 and only where part is applicable.
-
-
BEARING LOWER, MOTOR
Part No. PD19361
$27.74- Motor bearing
- lower
- Commonly used on various Robot Coupe models such as Blixer 2, Blixer 3D, Blixer 4A, CL 50, CL 50 Gourmet, CL 50 Ultra, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL50E, R 300, R 301, R 301 Ultra, R100, R100 PLUS, R100B, R100BCLR, R101, R101 Plus CB, R101B, R3-1500, R301, R301 ULTRA, R301U, R401A and where part is applicable.
-
Blade, S, Fine Serrated
Part No. PD39212
$164.18- S Blade
- Fine serrated
- Used on units with SIX side shaft.
- Use with cutting bowl only
- Used on various Robot Coupe models, such as: R300, R301, R301 Ultra and where part is applicable.
NOTE: Not for R301 Series D or R301 Ultra Series D.
-
Bottom Cushion Bushing
Part No. PD162779
$16.93- Commonly used on Robot Coupe models: R300, R301 Ultra, R300 C, R301 Ultra C, R300B and R301 Ultra B
-
Bowl Kit
Part No. PD41489
$867.55- Bowl Kit
- Includes
- Stainless steel bowl, 3-1/2 quart.
- lid
- S blade
- Used on various Robot Coupe models such as R301 Ultra Series D, R301U Dice.
-
BOWL KIT, SS
Part No. PD2845510
$716.00- Complete top section; stainless steel cutting bowl, lid and S blade
- Not for R301 Utra series D
-
BOWL LID (NEW STYLE) W/MAGNET
Part No. PD1947710
$82.52- Cutter Bowl Lid
- New Style Lid
- 7 5/8" Outer Diameter
- 2 3/8" Depth
- Plastic
- Clear
- With magnet
- Commonly used on Robot Coupe models such as R172, R300, R301U, R301 Series C & Older, R302, R302V and only where part is applicable.
-
-
-
Button, On Push , Green
Part No. PD162628
$109.97- AC15 240V 3A
- Commonly used on Robot Coupe models: R301 Ultra, CL50 Series B, CL55 Pusher, CL60 Bulk, CL60 Pusher, R301 Ultra C, R301 Ultra B, R8, R8U, R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U, R18 and C
-
CITRUS PRESS ATTACHMENT (R301-ULTRA)
Part No. PD3377410
$215.67- Citrus Press
- Juicer Kit
- Commonly used on Robot Coupe models such as R301 and only where part is applicable.
-
CONTINUOUS FEED ATTACHMENT
Part No. PD30100
$280.87- Continuous Feed Attachement
- Old Style
- Does not fit Series B or C models
- Call to review before ordering if you are not sure
- Has round feed chute design, not square feed chute design
- If you have a square feed you'll know this is the wrong unit.
- For Robot Coupe model R300
-
CONTINUOUS FEED ATTACHMENT - NEW STYLE
Part No. PD38067
$471.08- Continuous Feed Attachment
- (Old style lead lids will not fit on this, old style serial # 91/xxxx on machine)
- For complete continuous lead kit to replace old style lead order part #PD2845610
- Used on various Robot Coupe models such as: R301 Ultra C series, R300, R301 ULTRA and where part is applicable.
- Not for R302 series units
-
CONTINUOUS FEED KIT - NEW STYLE
Part No. PD2845610
$839.38- Continuous Feed Kit Assembly
- Includes:
- Continuous feed lead (chute)
- Continuous lead lid with pushers
- Discharge plate
- 13-3/4 x 11-1/4" x 11-3/4"
- Commonly used on Robot Coupe models such as R300, R301 Ultra C Series B & C, R301 Series B & C and where part is applicable.
- Replaces continuous feed kits for units with serial numbers 91/xxxx
-
CONTINUOUS FEED LEAD LID ONLY- New Style
Part No. PD30793
$122.51- Continuous Feed Lead
- Lid Only
- Requires half moon large pusher, round small pusher and pusher pivot pin.
- Commonly used on Robot Coupe models: R300 series, R300B series, R301B series, R301Ultra series.
-
CONTINUOUS FEED LEAD ONLY (LID)
Part No. PD50078
$155.34- Continuous feed lead only (lid)
- Used on various Robot Coupe models: R300 and Series B s/n FP002243, R300 Series C s/n 258xxxxx03, R301 Ultra Series A s/n 91/xxxx, B s/n 109/xxxxxx and up, C s/n 259xxxxx03 and where part is applicable.
-
CONTINUOUS FEED LEAD ONLY (LID)
Part No. PD50078E
$155.34- Continuous feed lead only (lid)
- Used on various Robot Coupe models: R300 and Series B s/n FP002243, R300 Series C s/n 258xxxxx03, R301 Ultra Series A s/n 91/xxxx, B s/n 109/xxxxxx and up, C s/n 259xxxxx03 and where part is applicable.
-
Continuous Feed Lead w/Large Pusher
Part No. PD162894
$158.93- Continuous Feed Lead
- with large pusher
- Used in Robot Coupe models such as R300, R301 series where part is applicable.
-
CONTINUOUS LEAD KIT COMPLETE ASSEMBLY
Part No. PD38068
$428.14- Complete Continuous Lead Feed Assembly
- New style
- (chute attachment, lid)
- Kit includes continuous lead lid, small and large pusher, large pusher bracket with knob
- Commonly used on Robot Coupe models: R300, R301 Ultra C, Series B, C, R301 Ultra Series A, B, C
-
CUTTER BOWL S/S
Part No. PD19474
$666.74- Stainless Steel Bowl Only
- 3.5 Qt
- Use on Robot Coupe models such as: R301 Ultra, R302 and where part is applicable
-
Data Plate
Part No. PD162136
$34.58- Commonly used on Robot Coupe models: R301 Ultra, R301 Ultra C and R301 Ultra B
-
-
DISCHARGE PLATE (for sq. lead design)
Part No. PD19491
$64.26- Discharge Plate
- For units with square lead lid only.
- Used on various Robot Coupe models such as R300, R301U and only where part is applicable.
- If your unit has the old style round feed lid, you need part number PD1948450
-
DISCHARGE PLATE, for round lead design
Part No. PD1948450
$58.85- Discharge Plate for Round Leed.
- Old Style
- Motor shaft would be six sided.
- For units with round feed lid ONLY. If your lid is square you will need the new style for the square lid design. See part number PD19491 for square lid style.
- (Round lead has a kidney shaped large pusher in it)
- Used on various Robot Coupe models such as R172, R300, R301U, and where part is applicable.
-
Electrical Board
Part No. PD162362
$280.61- Commonly used on Robot Coupe models: R301 Ultra, R301 Ultra C and R301 Ultra B
-
ELECTRICAL BOARD
Part No. PD29086
$220.40- Electrical Board
- Commonly used on Robot Coupe models: R301 Ultra
-
FOOT, BLACK, RUBBER
Part No. PD19453
$7.65- Rubber foot
- 1-1/4" Outer Diameter
- Black
- Used on various Robot Coupe models such as Blixer 3, Blixer 3B, Blixer 4, Blixer 4 Mono, Blixer 4 Tri, Blixer 4 V.V., CL 30-A, CL-30, R 2 Dicing, R 2 Ultra Dicing, R 300, R 301, R 301 Ultra, R 401, R2, R2 Dice, R2 Dicing, R2 Dicing Ultra, R2N, R3-1500, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, R401, R401A, R402, R402A, R402 V.V. and only where part is applicable.
-
FOOT, Round Style Head
Part No. PD1936010
$8.38- This style foot is not flat style, where contact on table is made
- Commonly found on models: R300, R301U
- Do not use for 300/301 Series B/C models
- On R300, use PD1101010 if serial number is after 34/36801
-
Grating Disc 6 mm (1/4") Coarse
Part No. PD2721810
$95.97- Coarse grating disc
- 6 mm (1/4")
- Diameter: 6 3/4"
- Fits old and new styles
- Commonly used on various Robot Coupe models such as R100, R100 Plus, R2N, R2N Ultra, R2 Dice, R300, R301 Ultra, R302, R302V, R401, R402V, CL30, R172 SERIES, R2, R2U, R2C, R2K, R3001U and only where part is applicable.
-
Grating Disc, 9 mm 11/32 Extra course
Part No. PD19389
$84.42- Extra course grating disc
- 11/32" (9 mm) diameter cuts
- Fits old and new styles
- Used on various Robot Coupe models such as R2N, R2N Ultra, R301 and only where part is applicable.
-
Grating Disc, Medium 2mm 5/64"
Part No. PD1938510
$84.42- Medium grating disc
- Medium Grating Plate, 1/8"
- 5/64" (2 mm) cuts
- Used on various Robot coupe models such as R100, R101, R101 Plus CB, R2N, R2N Ultra, R301 and only where part is applicable.
-
Grating Disc, Medium Coarse, 3 mm 1/8"
Part No. PD2554510
$84.42- Medium coarse grating disc
- 3 mm (1/8")
- Used on various Robot Coupe models such as R2N, R2N ultra, CL30 SERIES, R100 SERIES, R172 SERIES, R2, R2U, R2C SERIES, R2K SERIES, R2N SERIES, R300 SERIES, R301U, R301U SERIES, R302 SERIES and only where part is applicable.
-
GRATING PLATE, FINE 1.5MM 1/16"
Part No. PD1938410
$84.42- Fine Grating plate
- 1/16" (1 1/2 mm) cuts
- Used on various Robot Coupe models such as CL30, R100, R2C, R2N, R300, R300C, R301 ULTRA C, R301 ULTRA, R302, R302V, R401, R402V, R2-DICE, R2-DICE ULTRA and only where part is applicable.
-
Grill
Part No. PD162062
$19.89- Commonly used on Robot Coupe models: R300, R300 Series B, R300 Series C, R301 Ultra, R301 Ultra Series B, R301 Ultra Series C, R300 C, R300C Series B, R300C Series C, R301 Ultra C, R301 Ultra C Series B, R301 Ultra C Series C, R300B, R300B Series
-
-
Juicer Cone
Part No. PD137066
$60.62- Commonly used on Robot Coupe models: R2NCLR (3 Quart), R300 Series B, R301 Ultra, R301 Ultra Series B, R300B, R300B Series B, R301 Ultra B and R301 Ultra B Series B
-
Julienne Disc, 2 x 2 mm (5/64)
Part No. PD1938810
$97.15- Julienne disc
- 5/64" x 5/64" (2 mm x 2 mm) cuts
- Fits old and new styles
- Used on various Robot Coupe models such as CL30 SERIES, R100 SERIES, R172 SERIES, R2, R2U, R2C SERIES,R2K SERIES, R2N SERIES, R2U SERIES, R300 SERIES, R301U SERIES, R302 SERIES and only where part is applicable.
-
Jumper Wire, PCB
Part No. PD162395
$7.55- Commonly used on Robot Coupe models: R301 Ultra, R301 Ultra C and R301 Ultra B
-
LARGE PUSHER ASSEMBLY
Part No. PD3668410
$146.60- Large Pusher Assembly
- Includes Pusher & Knob
- For new style continuous feed lid kit
- Commonly used on Robot Coupe models such as R301, R301 Ultra, R301 Series D and where part is applicable
-
Large Pusher Rod Only R300, R301U (C)
Part No. PD163317
$142.57- Large Pusher Rod only
- Metal shaft
- Black head
- Commonly used on Robot Coupe models: R300, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, 301U Series C and where part is applicable.
-
Large Pusher with Rod
Part No. PD162662
$70.05- Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R301 Ultra Series B, R300 C, R300C Series B, R301 Ultra C and R301 Ultra C Series B
-
Magnetic Switch- R122AA
Part No. PD162740
$31.22- Commonly used on Robot Coupe models: R300, R301 Ultra, R300 C, R301 Ultra C, R300B and R301 Ultra B
-
Motor Relay, 16/39 MTRP
Part No. PD29844
$75.94- Motor Relay
- MTRP
- 2 3/16" Height
- Commonly used on Robot Coupe models such as Blixer 2, CL-30, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL-52, J80 Ultra, R100, R100 PLUS, R100B, R100BCLR, R101, R101 PLUS CB, R101B, R300, R301, R301 ULTRA, R402A, CL-55 and only where part is applicable.
-
MOTOR SUPPORT
Part No. PD27262
$249.97- Motor Support
- 3 hole
- Commonly used on Robot Coupe models: R301 Ultra
-
Motor Support Screw
Part No. PD162563
$5.04- Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R300 C, R300C Series B, R301 Ultra C, R300B, R300B Series B, R301 Ultra B, BX3 Blixer and Blixer 3
-
-
Off Push Button (Red)
Part No. PD162693
$103.56- Commonly used on Robot Coupe models: R301 Ultra, CL50 Series B, CL55 Pusher, CL60 Bulk, CL60 Pusher, R301 Ultra C, R301 Ultra B, R8, R8U and CJ80
-
Pin, Pusher Return
Part No. PD162474
$18.54- Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R301 Ultra Series B, R300 C, R300C Series B, R301 Ultra C and R301 Ultra C Series B
- Dimensions are 3-1/2" X 7/8"
-
POWER CORD R300/301U
Part No. PD3401010
$39.39- Used on various Robot Coupe models such as: R300, R301U, and where part is applicable
-
Power On (red or white)
Part No. PD162846
$34.58- Power On
- Red or white
- Commonly used on Robot Coupe models such as R-301 Ultra and where part is applicable.
-
Pulse Push Button, Black
Part No. PD162783
$106.76- Commonly used on Robot Coupe models: R301 Ultra, R301 Ultra C, R301 Ultra B, R8, R8U, R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U and R18
-
-
PUSHER KNOB, ROBOT COUPE, 117452S
Part No. PD26507
$23.06- Handle, Pusher
- Black
- Plastic
- Commonly used on various Robot Coupe models such as CL-30, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, R300, R301, R301 Dice, R301 ULTRA, R301 Ultra dice, R302, R302V, R401, R401A, R402, R402 V. A, R402 V.V., R402A, R502E, R502X, R602E, R6N, R6V, R6VN, R6X and only where part is applicable.
-
-
Pusher, Small (L)
Part No. PD28502
$26.26- Small round Pusher
- Length is 6 3/4" inches.
- Outer Diameter 2 5/8" Inches
- Inner Diameter 2" Inches
- Gray
- Plastic
- Commonly used on various Robot Coupe models such as CL52, CL50D, CL50E, R300, R301, R301 Dice, R301 ULTRA, R301 ULTRA Series C, R301 Ultra Dice, R6N, R6VN, R6X.
- Does not fit R6N, R6VN & R6X Series A machines and only where part is applicable.
-
Retaining Clip for Pin
Part No. PD162782
$8.85- Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R301 Ultra Series B, R300 C, R300C Series B, R301 Ultra C and R301 Ultra C Series B
- Dimensions are 7/16" X 1/2"
-
Rod, Bowl Magnet
Part No. PD19488
$68.13- Bowl Magnet Rod
- 5-1/2"
- Commonly used on Robot Coupe models $301 Ultra and where part is applicable.
-
-
S Blade, Coarse Serrated
Part No. PD3524510
$164.18- S Blade
- Course serrated
- Used on units with six side shaft.
- Use with cutting bowl only
- Used on various Robot Coupe models such as R300, R301, R301 Ultra and only where part is applicable.
NOTE: Not for R301 Series D or R301 Ultra Series D.
-
S BLADE, SMOOTH EDGE, HEX SHAFT *
Part No. PD1947510
$87.44- S Blade
- 7" Width
- 2 11/16" Depth
- Smooth edge
- Used on units with six sided HEX shaft.
- Use with cutting bowl only
- Used on various Robot Coupe models such as R172, R300, R301, R301 Ultra and only where part is applicable.
- Not for R301 Series D or R301 Ultra Series D.
- Not for Old Style model R-300
-
Screw Cover Disc
Part No. PD162156
$5.22- Black Disc Screw Cover
- 1" diameter
- These pieces usually get destroyed when removing to get to the screws that mount the motor to the motor support.
- Not recommended to re-use the ones removed because liquids could get down to the motor area
- Commonly used on Robot Coupe model R301 Ultra and where part is applicable.
-
Screw, MS Cent Mtr
Part No. PD137070
$3.90- Commonly used on Robot Coupe models: R301 Ultra, R301 Ultra Series B, R301 Ultra C, R301 Ultra C Series B, R301 Ultra B and R301 Ultra B Series B
-
SIDE BRACKETS, (PKG 2)
Part No. PD25709
$49.72- Locking Bush Set W/Screws
- Commonly used on Robot Coupe models: Blixer 3, Blixer 4, BX3 CL30, R301Ultra Series, R302, R402V
-
Slicing Disc, 6 mm 1/4"
Part No. PD1105510
$94.44- Julienne Plate
- 4mm x 4mm
- 5/32"
- Used on various Robot Coupe models such as R2, RN, R2N Ultra, R2 Dice,R100, R301, R401, R402V, CL-30A and only where part is applicable.
-
Small Pusher
Part No. PD162194
$26.98- Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R301 Ultra Series B, R300 C, R300C Series B, R301 Ultra C and R301 Ultra C Series B
- Dimensions are 6-5/8" X 2-1/2"
-
Spring, Pusher Return
Part No. PD162674
$14.40- Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R301 Ultra Series B, R300 C, R300C Series B, R301 Ultra C and R301 Ultra C Series B
- Dimensions are 2-3/8" X 3/4"
-
Strain Relief
Part No. PD162249
$8.25- Used on various Robot Coupe models such as: R2 (Old Style), R300, R300 Series B, R300 Series C, R301 Ultra, R301 Ultra Series B, R301 Ultra Series C, R4, R6 Series (R6N, R6B, R6C), R6V Series (R6VN, R6VB, R6VC), R2C (old style), R300 C, R300C Series B, R
-
Switch w/Housing
Part No. PD162369
$34.34- Commonly used on Robot Coupe models: R300 Series B, R301 Ultra, R300C Series B, R301 Ultra C, R300B Series B and R301 Ultra B