R301 Ultra Series B

46 Part(s)

Set Descending Direction
per page
  1. Baffle Plate

    Part No. PD162206

    $36.32
    • Baffle Plate
    • White
    • Used on various Robot Coupe models such as R301 Ultra, R301 Ultra Series B, R301 Ultra C, R301 Ultra C Series B, R301 Ultra B, R301 Ultra B Series B, BX3 Blixer and Blixer 3 and only where part is applicable.
  2. BEARING, TOP OR BOTTOM, SEALED 6204

    Part No. PD1100950

    $62.84
    • (For the A O Smith motors only).
    • Sealed Bearing
    • 1-9/16 diameter x 11/16 x 7/16"
    • Top or bottom bearing
    • Used on various Robot Coupe models such s R2 (Old Style), R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra
  3. Blade, S, Fine Serrated

    Part No. PD39212

    $164.18
    • S Blade
    • Fine serrated
    • Used on units with SIX side shaft.
    • Use with cutting bowl only
    • Used on various Robot Coupe models, such as: R300, R301, R301 Ultra and where part is applicable.

    NOTE: Not for R301 Series D or R301 Ultra Series D.

  4. BOWL LID (NEW STYLE) W/MAGNET

    Part No. PD1947710

    $82.52
    • Cutter Bowl Lid
    • New Style Lid
    • 7 5/8" Outer Diameter
    • 2 3/8" Depth
    • Plastic
    • Clear
    • With magnet
    • Commonly used on Robot Coupe models such as R172, R300, R301U, R301 Series C & Older, R302, R302V and only where part is applicable.
  5. BOWL ROD ASSY, 5-5/16

    Part No. PD2701210

    $46.78
    • Bowl Rod Assembly
    • 5-5/16"
    • Commonly used on Robot Coupe models such as R301-B, R301UB, R302, R302B, R302V, R302VB and where part is applicable. 
  6. BREAKER, 8 Amp, Push to Reset

    Part No. PD3729410

    $44.45
    • Breaker
    • 8 amp
    • 250 V AC Max
    • 50 V DC Max
    • Comes with screw on nut
    • Used on Various Robot Coupe models such as R100, R100 PLUS, R2 old style, R2N, R2N Ultra, R2N-ULTRA and only where part is applicable.
  7. CAP & SEAL

    Part No. PD2949110

    $7.83
    • For "S" blades in model R2 series except R2Dice, R300, R301
  8. CAPACITOR, ROBOT COUPE R222

    Part No. PD30252

    $66.60
    • Capacitor
    • 115/125VAC
    • 50/60HZ 
    • Commonly used on Robot Coupe model: R2U and where part is applicable.
  9. CONTINUOUS FEED ATTACHMENT - NEW STYLE

    Part No. PD38067

    $471.08
    • Continuous Feed Attachment
    • (Old style lead lids will not fit on this, old style serial # 91/xxxx on machine)
    • For complete continuous lead kit to replace old style lead order part #PD2845610
    • Used on various Robot Coupe models such as: R301 Ultra C series, R300, R301 ULTRA and where part is applicable.
    • Not for R302 series units
  10. CONTINUOUS FEED KIT - NEW STYLE

    Part No. PD2845610

    $839.38
    • Continuous Feed Kit Assembly
    • Includes:
      • Continuous feed lead (chute)
      • Continuous lead lid with pushers
      • Discharge plate
    • 13-3/4 x 11-1/4" x 11-3/4"
    • Commonly used on Robot Coupe models such as R300, R301 Ultra C Series B & C, R301 Series B & C and where part is applicable.   
    • Replaces continuous feed kits for units with serial numbers 91/xxxx
  11. CONTINUOUS FEED LEAD LID ONLY- New Style

    Part No. PD30793

    $122.51
    • Continuous Feed Lead
    • Lid Only
    • Requires half moon large pusher, round small pusher and pusher pivot pin.
    • Commonly used on Robot Coupe models: R300 series, R300B series, R301B series, R301Ultra series.
  12. CONTINUOUS FEED LEAD LID ONLY- New Style

    Part No. PD30793B

    $122.51
    • Continuous Feed Lead
    • Lid Only
    • Requires half moon large pusher, round small pusher and pusher pivot pin.
    • Commonly used on Robot Coupe models: R300 series, R300B series, R301B series, R301Ultra series.
  13. CONTINUOUS FEED LEAD ONLY (LID)

    Part No. PD50078

    $155.34
    • Continuous feed lead only (lid)
    • Used on various Robot Coupe models: R300 and Series B s/n FP002243, R300 Series C s/n 258xxxxx03, R301 Ultra Series A s/n 91/xxxx, B s/n 109/xxxxxx and up, C s/n 259xxxxx03 and where part is applicable.
  14. CONTINUOUS FEED LEAD ONLY (LID)

    Part No. PD50078D

    $155.34
    • Continuous feed lead only (lid)
    • Used on various Robot Coupe models: R300 and Series B s/n FP002243, R300 Series C s/n 258xxxxx03, R301 Ultra Series A s/n 91/xxxx, B s/n 109/xxxxxx and up, C s/n 259xxxxx03 and where part is applicable.
  15. Continuous Feed Lead w/Large Pusher

    Part No. PD162894

    $158.93
    • Continuous Feed Lead
    • with large pusher
    • Used in Robot Coupe models such as R300, R301 series where part is applicable.
  16. CONTINUOUS LEAD KIT COMPLETE ASSEMBLY

    Part No. PD38068

    $428.14
    • Complete Continuous Lead Feed Assembly
    • New style
    • (chute attachment, lid)
    • Kit includes continuous lead lid, small and large pusher, large pusher bracket with knob
    • Commonly used on Robot Coupe models: R300, R301 Ultra C, Series B, C, R301 Ultra Series A, B, C
  17. CORD, W/PLUG R240, ROBOT COUPE

    Part No. PD2550510

    $53.63
    • Cord with plug
    • SJTOW type
    • 120 V
    • 13 Amp
    • 6' cord
    • 3 wire
    • 16 gauge
    • Commonly used on various Robot Coupe models such as CL 30, CL 50, CL 52, CL 52-D, R 100, R 100 Plus, R 300, R100 PLUS, R100B, R100BCLR, R2B, R2N, R2N Ultra, R2N-ULTRA, R302 and only where part is applicable.
  18. CUTTER BOWL S/S

    Part No. PD19474

    $666.74
    • Stainless Steel Bowl Only
    • 3.5 Qt
    • Use on Robot Coupe models such as: R301 Ultra, R302 and where part is applicable
  19. DATA PLATE, R301U, 405865

    Part No. PD3396920

    $32.30
    • Fits model R301 Ultra
  20. DEFLECTER WASHER SS

    Part No. PD38588

    $34.95
    • Deflector Washer
    • Stainless Steel
    • Commonly used on Robot Coupe models Blixer 3, 3B, R300, R301, R301 Ulltra and where part is applicable.
  21. DISC-PLATE STORAGE RACK

    Part No. PD1942050

    $32.50
    • Storage Rack
    • Metal
    • Epoxy coating
    • Holds up to 8 food processor discs
    • 4 1/2" x 13 1/4" x 2 1/2"
    • Prevent blades from hitting each other while in a storage drawer. Protects blade edge.
    • Prevent employees from cutting themselves when handling these sharp blades.
    • Used on various Robot Coupe models such as CL 30, CL 50, CL 55 Pusher, CL 60 Bulk, CL 60 Pusher, Food Processor, R 100, R 100 Plus, R 300, R 301 Ultra, R100, R100 PLUS, R101, R101 Plus CB, R2 Ultra Dice, R2N, R2N Ultra, R2N-ULTRA, R301 ULTRA, R301 Ultra Dice, R301U, R302, R302V, R4, R401A, R402 V. A, R402A, R4N, R4N SERIES D, R4X, R6, R602, R602E, R6N, R6V, R6VN, R6VN-D, R6X and only where part is applicable.
  22. DISCHARGE PLATE (for sq. lead design)

    Part No. PD19491

    $64.26
    • Discharge Plate
    • For units with square lead lid only.
    • Used on various Robot Coupe models such as R300, R301U and only where part is applicable.
    • If your unit has the old style round feed lid, you need part number PD1948450
  23. FOOT, BLACK, RUBBER

    Part No. PD19453

    $7.65
    • Rubber foot
    • 1-1/4" Outer Diameter
    • Black
    • Used on various Robot Coupe models such as Blixer 3, Blixer 3B, Blixer 4, Blixer 4 Mono, Blixer 4 Tri, Blixer 4 V.V., CL 30-A, CL-30, R 2 Dicing, R 2 Ultra Dicing, R 300, R 301, R 301 Ultra, R 401, R2, R2 Dice, R2 Dicing, R2 Dicing Ultra, R2N, R3-1500, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, R401, R401A, R402, R402A, R402 V.V. and only where part is applicable.
    Strongly advisable to replace all 4 at the same time to protect balance. You do not want your unit to wobble!
  24. Grill

    Part No. PD162062

    $19.89
    • Commonly used on Robot Coupe models: R300, R300 Series B, R300 Series C, R301 Ultra, R301 Ultra Series B, R301 Ultra Series C, R300 C, R300C Series B, R300C Series C, R301 Ultra C, R301 Ultra C Series B, R301 Ultra C Series C, R300B, R300B Series
  25. Hinged Bracket, Large Pusher

    Part No. PD162915

    $54.53
    Hinged Bracket, Large Pusher
  26. LARGE PUSHER ASSEMBLY

    Part No. PD3668410

    $146.60
    • Large Pusher Assembly
    • Includes Pusher & Knob
    • For new style continuous feed lid kit
    • Commonly used on Robot Coupe models such as R301, R301 Ultra, R301 Series D and where part is applicable 
  27. Large Pusher Rod Only R300, R301U (C)

    Part No. PD163317

    $142.57
    • Large Pusher Rod only
    • Metal shaft
    • Black head
    • Commonly used on Robot Coupe models: R300, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, 301U Series C and where part is applicable.
  28. Large Pusher with Rod

    Part No. PD162662

    $70.05
    • Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R301 Ultra Series B, R300 C, R300C Series B, R301 Ultra C and R301 Ultra C Series B
  29. MAGNETIC SWITCH ASSEMBLY

    Part No. PD38482

    $56.40
    • Magnetic Switch Assembly
    • Commonly Used on Robot Coupe models such as Blixer 3, BX3, R301B, R301Ultra CB, R301Ultra BB and only where part is applicable. 
  30. MOTOR EXTENSION SHAFT

    Part No. PD32503

    $82.82
    • Motor Shaft Extension
    • Metal w/washer
    • Commonly used on various Robot Coupe models such as R300, R301 Ultra and where part is applicable. 
  31. MOTOR SUPPORT (NO LIGHT)

    Part No. PD3643110

    $249.97
    • Motor Support
    • 3 hole mount
    • Gray
    • with front plate
    • Commonly used on Robot Coupe models: R301B
  32. MOTOR SUPPORT SEAL

    Part No. PD27258

    $15.58
    • Recommended to replace both seals (they are the same) instead of just one
    • Used on Various Robot Coupe Models Such As Blixer 3, R300
  33. PC BOARD, R301

    Part No. PD2690850

    $157.38
    • Commonly used on Robot Coupe models: R301
    • PLease verify serial number
  34. Pin, Pusher Return

    Part No. PD162474

    $18.54
    • Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R301 Ultra Series B, R300 C, R300C Series B, R301 Ultra C and R301 Ultra C Series B
    • Dimensions are 3-1/2" X 7/8"
  35. PUSHER GUIDE

    Part No. PD3668310

    $115.42
    • Commonly used on Robot Coupe models: R301 U Series C
  36. PUSHER KNOB, ROBOT COUPE, 117452S

    Part No. PD26507

    $23.06
    • Handle, Pusher
    • Black
    • Plastic
    • Commonly used on various Robot Coupe models such as CL-30, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, R300, R301, R301 Dice, R301 ULTRA, R301 Ultra dice, R302, R302V, R401, R401A, R402, R402 V. A, R402 V.V., R402A, R502E, R502X, R602E, R6N, R6V, R6VN, R6X and only where part is applicable.
  37. Pusher, Small (L)

    Part No. PD28502

    $26.26
    • Small round Pusher
    • Length is 6 3/4" inches.
    • Outer Diameter 2 5/8" Inches
    • Inner Diameter 2" Inches
    • Gray
    • Plastic
    • Commonly used on various Robot Coupe models such as CL52, CL50D, CL50E, R300, R301, R301 Dice, R301 ULTRA, R301 ULTRA Series C, R301 Ultra Dice, R6N, R6VN, R6X.
    • Does not fit R6N, R6VN & R6X Series A machines and only where part is applicable.
  38. Retaining Clip for Pin

    Part No. PD162782

    $8.85
    • Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R301 Ultra Series B, R300 C, R300C Series B, R301 Ultra C and R301 Ultra C Series B
    • Dimensions are 7/16" X 1/2"
  39. Rubber Cord Sleeve

    Part No. PD33108

    $10.55
    • Commonly used on Robot Coupe models: R301 Ultra
  40. S BLADE, SMOOTH EDGE, HEX SHAFT *

    Part No. PD1947510

    $87.44
    • S Blade
    • 7" Width
    • 2 11/16" Depth
    • Smooth edge
    • Used on units with six sided HEX shaft.
    • Use with cutting bowl only
    • Used on various Robot Coupe models such as R172, R300, R301, R301 Ultra and only where part is applicable.
    • Not for R301 Series D or R301 Ultra Series D.
    • Not for Old Style model R-300
  41. Screw (Base-MS 3.9 x 19), Torx

    Part No. PD25525

    $4.41
    • Screw for base
    • Torx
    • Each
    • Commonly Used on various Robot Coupe models such as R2, R2NBlixer 3, R 2 Dicing, R 2 Ultra Dicing, R100 PLUS, R100B, R100BCLR, R2 Dice, R2 Ultra Dice, R2N, R2N Ultra, R2N-ULTRA and only where part is applicable.

    Torx Bit Required (Place in search box PD25525)

  42. Screw Cover Disc

    Part No. PD162156

    $5.22
    • Black Disc Screw Cover
    • 1" diameter
    • These pieces usually get destroyed when removing to get to the screws that mount the motor to the motor support.
    • Not recommended to re-use the ones removed because liquids could get down to the motor area
    • Commonly used on Robot Coupe model R301 Ultra and where part is applicable.
  43. SIDE BRACKETS, (PKG 2)

    Part No. PD25709

    $49.72
    • Locking Bush Set W/Screws
    • Commonly used on Robot Coupe models: Blixer 3, Blixer 4, BX3 CL30, R301Ultra Series, R302, R402V
  44. Small Pusher

    Part No. PD162194

    $26.98
    • Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R301 Ultra Series B, R300 C, R300C Series B, R301 Ultra C and R301 Ultra C Series B
    • Dimensions are 6-5/8" X 2-1/2"
  45. Spring, Pusher Return

    Part No. PD162674

    $14.40
    • Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R301 Ultra Series B, R300 C, R300C Series B, R301 Ultra C and R301 Ultra C Series B
    • Dimensions are 2-3/8" X 3/4"
  46. Strain Relief

    Part No. PD162249

    $8.25
    • Used on various Robot Coupe models such as: R2 (Old Style), R300, R300 Series B, R300 Series C, R301 Ultra, R301 Ultra Series B, R301 Ultra Series C, R4, R6 Series (R6N, R6B, R6C), R6V Series (R6VN, R6VB, R6VC), R2C (old style), R300 C, R300C Series B, R

46 Part(s)

Set Descending Direction
per page