R301 Ultra C

51 Part(s)

Set Descending Direction
per page
  1. Baffle Plate

    Part No. PD162205

    $55.46
    • Commonly used on Robot Coupe models: R300, R301 Ultra, R300 C, R301 Ultra C, R300B and R301 Ultra B
  2. Baffle Plate

    Part No. PD162206

    $36.32
    • Baffle Plate
    • White
    • Used on various Robot Coupe models such as R301 Ultra, R301 Ultra Series B, R301 Ultra C, R301 Ultra C Series B, R301 Ultra B, R301 Ultra B Series B, BX3 Blixer and Blixer 3 and only where part is applicable.
  3. BEARING LOWER, MOTOR

    Part No. PD19361

    $27.74
    • Motor bearing
    • lower
    • Commonly used on various Robot Coupe models such as Blixer 2, Blixer 3D, Blixer 4A, CL 50, CL 50 Gourmet, CL 50 Ultra, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL50E, R 300, R 301, R 301 Ultra, R100, R100 PLUS, R100B, R100BCLR, R101, R101 Plus CB, R101B, R3-1500, R301, R301 ULTRA, R301U, R401A and where part is applicable.
  4. BEARING, TOP OR BOTTOM, SEALED 6204

    Part No. PD1100950

    $62.84
    • (For the A O Smith motors only).
    • Sealed Bearing
    • 1-9/16 diameter x 11/16 x 7/16"
    • Top or bottom bearing
    • Used on various Robot Coupe models such s R2 (Old Style), R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra
  5. Bottom Cushion Bushing

    Part No. PD162779

    $16.93
    • Commonly used on Robot Coupe models: R300, R301 Ultra, R300 C, R301 Ultra C, R300B and R301 Ultra B
  6. BREAKER, 8 Amp, Push to Reset

    Part No. PD3729410

    $44.45
    • Breaker
    • 8 amp
    • 250 V AC Max
    • 50 V DC Max
    • Comes with screw on nut
    • Used on Various Robot Coupe models such as R100, R100 PLUS, R2 old style, R2N, R2N Ultra, R2N-ULTRA and only where part is applicable.
  7. Btm Cushion Bush Support

    Part No. PD162932

    $26.26
    Btm Cushion Bush Support
  8. Button, On Push , Green

    Part No. PD162628

    $109.97
    • AC15 240V 3A
    • Commonly used on Robot Coupe models: R301 Ultra, CL50 Series B, CL55 Pusher, CL60 Bulk, CL60 Pusher, R301 Ultra C, R301 Ultra B, R8, R8U, R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U, R18 and C
  9. CAPACITOR, ROBOT COUPE R222

    Part No. PD30252

    $66.60
    • Capacitor
    • 115/125VAC
    • 50/60HZ 
    • Commonly used on Robot Coupe model: R2U and where part is applicable.
  10. CONTINUOUS FEED ATTACHMENT

    Part No. PD30100

    $280.87
    • Continuous Feed Attachement
    • Old Style
    • Does not fit Series B or C models
    • Call to review before ordering if you are not sure
    • Has round feed chute design, not square feed chute design
    • If you have a square feed you'll know this is the wrong unit.
    • For Robot Coupe model R300
  11. CONTINUOUS FEED ATTACHMENT - NEW STYLE

    Part No. PD38067

    $471.08
    • Continuous Feed Attachment
    • (Old style lead lids will not fit on this, old style serial # 91/xxxx on machine)
    • For complete continuous lead kit to replace old style lead order part #PD2845610
    • Used on various Robot Coupe models such as: R301 Ultra C series, R300, R301 ULTRA and where part is applicable.
    • Not for R302 series units
  12. CONTINUOUS FEED KIT - NEW STYLE

    Part No. PD2845610

    $839.38
    • Continuous Feed Kit Assembly
    • Includes:
      • Continuous feed lead (chute)
      • Continuous lead lid with pushers
      • Discharge plate
    • 13-3/4 x 11-1/4" x 11-3/4"
    • Commonly used on Robot Coupe models such as R300, R301 Ultra C Series B & C, R301 Series B & C and where part is applicable.   
    • Replaces continuous feed kits for units with serial numbers 91/xxxx
  13. CONTINUOUS FEED LEAD LID ONLY- New Style

    Part No. PD30793

    $122.51
    • Continuous Feed Lead
    • Lid Only
    • Requires half moon large pusher, round small pusher and pusher pivot pin.
    • Commonly used on Robot Coupe models: R300 series, R300B series, R301B series, R301Ultra series.
  14. CONTINUOUS FEED LEAD ONLY (LID)

    Part No. PD50078

    $155.34
    • Continuous feed lead only (lid)
    • Used on various Robot Coupe models: R300 and Series B s/n FP002243, R300 Series C s/n 258xxxxx03, R301 Ultra Series A s/n 91/xxxx, B s/n 109/xxxxxx and up, C s/n 259xxxxx03 and where part is applicable.
  15. Continuous Feed Lead w/Large Pusher

    Part No. PD162894

    $158.93
    • Continuous Feed Lead
    • with large pusher
    • Used in Robot Coupe models such as R300, R301 series where part is applicable.
  16. CONTINUOUS LEAD KIT COMPLETE ASSEMBLY

    Part No. PD38068

    $428.14
    • Complete Continuous Lead Feed Assembly
    • New style
    • (chute attachment, lid)
    • Kit includes continuous lead lid, small and large pusher, large pusher bracket with knob
    • Commonly used on Robot Coupe models: R300, R301 Ultra C, Series B, C, R301 Ultra Series A, B, C
  17. CORD, W/PLUG R240, ROBOT COUPE

    Part No. PD2550510

    $53.63
    • Cord with plug
    • SJTOW type
    • 120 V
    • 13 Amp
    • 6' cord
    • 3 wire
    • 16 gauge
    • Commonly used on various Robot Coupe models such as CL 30, CL 50, CL 52, CL 52-D, R 100, R 100 Plus, R 300, R100 PLUS, R100B, R100BCLR, R2B, R2N, R2N Ultra, R2N-ULTRA, R302 and only where part is applicable.
  18. Data Plate

    Part No. PD162136

    $34.58
    • Commonly used on Robot Coupe models: R301 Ultra, R301 Ultra C and R301 Ultra B
  19. DEFLECTER WASHER SS

    Part No. PD38588

    $34.95
    • Deflector Washer
    • Stainless Steel
    • Commonly used on Robot Coupe models Blixer 3, 3B, R300, R301, R301 Ulltra and where part is applicable.
  20. DISC-PLATE STORAGE RACK

    Part No. PD1942050

    $32.50
    • Storage Rack
    • Metal
    • Epoxy coating
    • Holds up to 8 food processor discs
    • 4 1/2" x 13 1/4" x 2 1/2"
    • Prevent blades from hitting each other while in a storage drawer. Protects blade edge.
    • Prevent employees from cutting themselves when handling these sharp blades.
    • Used on various Robot Coupe models such as CL 30, CL 50, CL 55 Pusher, CL 60 Bulk, CL 60 Pusher, Food Processor, R 100, R 100 Plus, R 300, R 301 Ultra, R100, R100 PLUS, R101, R101 Plus CB, R2 Ultra Dice, R2N, R2N Ultra, R2N-ULTRA, R301 ULTRA, R301 Ultra Dice, R301U, R302, R302V, R4, R401A, R402 V. A, R402A, R4N, R4N SERIES D, R4X, R6, R602, R602E, R6N, R6V, R6VN, R6VN-D, R6X and only where part is applicable.
  21. DISCHARGE PLATE (for sq. lead design)

    Part No. PD19491

    $64.26
    • Discharge Plate
    • For units with square lead lid only.
    • Used on various Robot Coupe models such as R300, R301U and only where part is applicable.
    • If your unit has the old style round feed lid, you need part number PD1948450
  22. DISCHARGE PLATE, for round lead design

    Part No. PD1948450

    $58.85
    • Discharge Plate for Round Leed.
    • Old Style
    • Motor shaft would be six sided.
    • For units with round feed lid ONLY. If your lid is square you will need the new style for the square lid design. See part number PD19491 for square lid style.
    • (Round lead has a kidney shaped large pusher in it)
    • Used on various Robot Coupe models such as R172, R300, R301U, and where part is applicable.
  23. Electrical Board

    Part No. PD162362

    $280.61
    • Commonly used on Robot Coupe models: R301 Ultra, R301 Ultra C and R301 Ultra B
  24. FOOT, Round Style Head

    Part No. PD1936010

    $8.38
    • This style foot is not flat style, where contact on table is made
    • Commonly found on models: R300, R301U
    • Do not use for 300/301 Series B/C models
    • On R300, use PD1101010 if serial number is after 34/36801
  25. Foot, White (best practice to change 4)

    Part No. PD1101010

    $9.05
    • Foot for base
    • White in color
    • Used on various Robot Coupe models such as R100, R100CLR, R100 Plus, R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart-serial Number 246xxxxx05), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra and where part is applicable.  

    Note: Best practice is to always replace all 4 feet to ensure the proper balance of the unit and to avoid dangerous vibrations.

  26. Grill

    Part No. PD162062

    $19.89
    • Commonly used on Robot Coupe models: R300, R300 Series B, R300 Series C, R301 Ultra, R301 Ultra Series B, R301 Ultra Series C, R300 C, R300C Series B, R300C Series C, R301 Ultra C, R301 Ultra C Series B, R301 Ultra C Series C, R300B, R300B Series
  27. Hinged Bracket, Large Pusher

    Part No. PD162915

    $54.53
    Hinged Bracket, Large Pusher
  28. Jumper Wire, PCB

    Part No. PD162395

    $7.55
    • Commonly used on Robot Coupe models: R301 Ultra, R301 Ultra C and R301 Ultra B
  29. LARGE PUSHER ASSEMBLY

    Part No. PD3668410

    $146.60
    • Large Pusher Assembly
    • Includes Pusher & Knob
    • For new style continuous feed lid kit
    • Commonly used on Robot Coupe models such as R301, R301 Ultra, R301 Series D and where part is applicable 
  30. Large Pusher Rod Only R300, R301U (C)

    Part No. PD163317

    $142.57
    • Large Pusher Rod only
    • Metal shaft
    • Black head
    • Commonly used on Robot Coupe models: R300, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, 301U Series C and where part is applicable.
  31. Large Pusher with Rod

    Part No. PD162662

    $70.05
    • Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R301 Ultra Series B, R300 C, R300C Series B, R301 Ultra C and R301 Ultra C Series B
  32. Magnetic Switch- R122AA

    Part No. PD162740

    $31.22
    • Commonly used on Robot Coupe models: R300, R301 Ultra, R300 C, R301 Ultra C, R300B and R301 Ultra B
  33. MOTOR EXTENSION SHAFT

    Part No. PD32503

    $82.82
    • Motor Shaft Extension
    • Metal w/washer
    • Commonly used on various Robot Coupe models such as R300, R301 Ultra and where part is applicable. 
  34. Motor Relay, 16/39 MTRP

    Part No. PD29844

    $75.94
    • Motor Relay
    • MTRP
    • 2 3/16" Height
    • Commonly used on Robot Coupe models such as Blixer 2, CL-30, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL-52, J80 Ultra, R100, R100 PLUS, R100B, R100BCLR, R101, R101 PLUS CB, R101B, R300, R301, R301 ULTRA, R402A, CL-55 and only where part is applicable.
  35. Motor Support Screw

    Part No. PD162563

    $5.04
    • Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R300 C, R300C Series B, R301 Ultra C, R300B, R300B Series B, R301 Ultra B, BX3 Blixer and Blixer 3
  36. MOTOR SUPPORT SEAL

    Part No. PD27258

    $15.58
    • Recommended to replace both seals (they are the same) instead of just one
    • Used on Various Robot Coupe Models Such As Blixer 3, R300
  37. MOTOR, 301U SERIES C

    Part No. PD3689310

    $548.22
    • French made motor, fan on the bottom of motor
    • 120V
    • Commonly used on Robot Coupe models: R301U
  38. Off Push Button (Red)

    Part No. PD162693

    $103.56
    • Commonly used on Robot Coupe models: R301 Ultra, CL50 Series B, CL55 Pusher, CL60 Bulk, CL60 Pusher, R301 Ultra C, R301 Ultra B, R8, R8U and CJ80
  39. Pin, Pusher Return

    Part No. PD162474

    $18.54
    • Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R301 Ultra Series B, R300 C, R300C Series B, R301 Ultra C and R301 Ultra C Series B
    • Dimensions are 3-1/2" X 7/8"
  40. Power On (red or white)

    Part No. PD162846

    $34.58
    • Power On
    • Red or white
    • Commonly used on Robot Coupe models such as  R-301 Ultra and where part is applicable.
  41. Pulse Push Button, Black

    Part No. PD162783

    $106.76
    • Commonly used on Robot Coupe models: R301 Ultra, R301 Ultra C, R301 Ultra B, R8, R8U, R10 (ETL) serial numbers R10-000385 and below, R10 (ETL) serial numbers R10-000376 and above, R10U and R18
  42. PUSHER GUIDE

    Part No. PD3668310

    $115.42
    • Commonly used on Robot Coupe models: R301 U Series C
  43. PUSHER KNOB, ROBOT COUPE, 117452S

    Part No. PD26507

    $23.06
    • Handle, Pusher
    • Black
    • Plastic
    • Commonly used on various Robot Coupe models such as CL-30, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, R300, R301, R301 Dice, R301 ULTRA, R301 Ultra dice, R302, R302V, R401, R401A, R402, R402 V. A, R402 V.V., R402A, R502E, R502X, R602E, R6N, R6V, R6VN, R6X and only where part is applicable.
  44. Pusher, Small (L)

    Part No. PD28502

    $26.26
    • Small round Pusher
    • Length is 6 3/4" inches.
    • Outer Diameter 2 5/8" Inches
    • Inner Diameter 2" Inches
    • Gray
    • Plastic
    • Commonly used on various Robot Coupe models such as CL52, CL50D, CL50E, R300, R301, R301 Dice, R301 ULTRA, R301 ULTRA Series C, R301 Ultra Dice, R6N, R6VN, R6X.
    • Does not fit R6N, R6VN & R6X Series A machines and only where part is applicable.
  45. Retaining Clip for Pin

    Part No. PD162782

    $8.85
    • Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R301 Ultra Series B, R300 C, R300C Series B, R301 Ultra C and R301 Ultra C Series B
    • Dimensions are 7/16" X 1/2"
  46. Rubber Cord Sleeve

    Part No. PD33108

    $10.55
    • Commonly used on Robot Coupe models: R301 Ultra
  47. Screw Cover Disc

    Part No. PD162156

    $5.22
    • Black Disc Screw Cover
    • 1" diameter
    • These pieces usually get destroyed when removing to get to the screws that mount the motor to the motor support.
    • Not recommended to re-use the ones removed because liquids could get down to the motor area
    • Commonly used on Robot Coupe model R301 Ultra and where part is applicable.
  48. Small Pusher

    Part No. PD162194

    $26.98
    • Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R301 Ultra Series B, R300 C, R300C Series B, R301 Ultra C and R301 Ultra C Series B
    • Dimensions are 6-5/8" X 2-1/2"
  49. Spring, Pusher Return

    Part No. PD162674

    $14.40
    • Commonly used on Robot Coupe models: R300, R300 Series B, R301 Ultra, R301 Ultra Series B, R300 C, R300C Series B, R301 Ultra C and R301 Ultra C Series B
    • Dimensions are 2-3/8" X 3/4"
  50. Strain Relief

    Part No. PD162249

    $8.25
    • Used on various Robot Coupe models such as: R2 (Old Style), R300, R300 Series B, R300 Series C, R301 Ultra, R301 Ultra Series B, R301 Ultra Series C, R4, R6 Series (R6N, R6B, R6C), R6V Series (R6VN, R6VB, R6VC), R2C (old style), R300 C, R300C Series B, R
  51. Switch w/Housing

    Part No. PD162369

    $34.34
    • Commonly used on Robot Coupe models: R300 Series B, R301 Ultra, R300C Series B, R301 Ultra C, R300B Series B and R301 Ultra B

51 Part(s)

Set Descending Direction
per page