R301 Ultra B Series C
-
BASE W/LARGE FOOT
Part No. PD37824
$63.83- Base with large foot
- Commonly used on various Robot Coupe models such as R 301 Ultra, WDG250, WDG250C, WFG250, WFG250C, WPG250, WPG250C, R300, R300 Series B, R301U old style, R301U Series B/C and only where part is applicable.
-
Blade, S, Fine Serrated
Part No. PD39212
$164.18- S Blade
- Fine serrated
- Used on units with SIX side shaft.
- Use with cutting bowl only
- Used on various Robot Coupe models, such as: R300, R301, R301 Ultra and where part is applicable.
NOTE: Not for R301 Series D or R301 Ultra Series D.
-
Bottom Cushion Bushing
Part No. PD162762
$39.04- Absorber
- Bottom cushion bushing
- Commonly used on Robot Coupe models: Blixer 2, Blixer 3B, Blixer 3D, Blixer 4, Blixer 4A, R100, R100 PLUS, R100B, R100BCLR, R101, R101 PLUS CB, R101B, R2 Ultra Dice, R2DICE, R300, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, R401, R401A.
-
BOWL LID (NEW STYLE) W/MAGNET
Part No. PD1947710
$82.52- Cutter Bowl Lid
- New Style Lid
- 7 5/8" Outer Diameter
- 2 3/8" Depth
- Plastic
- Clear
- With magnet
- Commonly used on Robot Coupe models such as R172, R300, R301U, R301 Series C & Older, R302, R302V and only where part is applicable.
-
Button Block Retainer R300,R301U "C" (C)
Part No. PD163316
$8.70(C) Button Block Retainer R300,R301U "C" -
-
CONTROL BOARD
Part No. PD32655
$228.69- Control board
- Used on Robot Coupe Series C models: 301U, R301UC, R301UB
-
-
CUTTER BOWL S/S
Part No. PD19474
$666.74- Stainless Steel Bowl Only
- 3.5 Qt
- Use on Robot Coupe models such as: R301 Ultra, R302 and where part is applicable
-
-
DEFLECTER WASHER SS
Part No. PD38588
$34.95- Deflector Washer
- Stainless Steel
- Commonly used on Robot Coupe models Blixer 3, 3B, R300, R301, R301 Ulltra and where part is applicable.
-
Fan Blade Only
Part No. PD41434
$26.98- Commonly used on Robot Coupe models: R100, CL30, CL50, R300 Series B
-
FOOT, BLACK, RUBBER
Part No. PD19453
$7.65- Rubber foot
- 1-1/4" Outer Diameter
- Black
- Used on various Robot Coupe models such as Blixer 3, Blixer 3B, Blixer 4, Blixer 4 Mono, Blixer 4 Tri, Blixer 4 V.V., CL 30-A, CL-30, R 2 Dicing, R 2 Ultra Dicing, R 300, R 301, R 301 Ultra, R 401, R2, R2 Dice, R2 Dicing, R2 Dicing Ultra, R2N, R3-1500, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, R401, R401A, R402, R402A, R402 V.V. and only where part is applicable.
-
Grill
Part No. PD162062
$19.89- Commonly used on Robot Coupe models: R300, R300 Series B, R300 Series C, R301 Ultra, R301 Ultra Series B, R301 Ultra Series C, R300 C, R300C Series B, R300C Series C, R301 Ultra C, R301 Ultra C Series B, R301 Ultra C Series C, R300B, R300B Series
-
Juicer Cone
Part No. PD162169
$60.62- Juicer Cone
- Commonly used on Robot Coupe models: R300 Series C, R301 Ultra Series C, R302, R302V, R300B Series C, R301 Ultra B Series C, R302B and R302VB
-
Juicer Kit
Part No. PD162188
$221.50- Juicer Kit
- Commonly used on Robot Coupe models: R301 Ultra Series C, R302, R302V, R301 Ultra B Series C, R302B and R302VB
-
MOTOR EXTENSION SHAFT
Part No. PD32503
$82.82- Motor Shaft Extension
- Metal w/washer
- Commonly used on various Robot Coupe models such as R300, R301 Ultra and where part is applicable.
-
Motor Relay, 16/39 MTRP
Part No. PD29844
$75.94- Motor Relay
- MTRP
- 2 3/16" Height
- Commonly used on Robot Coupe models such as Blixer 2, CL-30, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL-52, J80 Ultra, R100, R100 PLUS, R100B, R100BCLR, R101, R101 PLUS CB, R101B, R300, R301, R301 ULTRA, R402A, CL-55 and only where part is applicable.
-
MOTOR SUPPORT KIT
Part No. PD3534310
$215.77- Motor Support Kit
- motor support, 3 hole
- front panel
- screw caps
- Used on various Robot Coupe models such as R 301 Ultra, R301 ULTRA and only where part is applicable.
-
-
MOTOR SUPPORT SEAL
Part No. PD27258
$15.58- Recommended to replace both seals (they are the same) instead of just one
- Used on Various Robot Coupe Models Such As Blixer 3, R300
-
MOTOR, 301U SERIES C
Part No. PD3689310
$548.22- French made motor, fan on the bottom of motor
- 120V
- Commonly used on Robot Coupe models: R301U
-
PC Board Supp. R300,R301U Series "C" (C)
Part No. PD163315
$15.98PC Board Supp. R300,R301U Series "C" (C) -
POWER CORD R300/301U
Part No. PD3401010
$39.39- Used on various Robot Coupe models such as: R300, R301U, and where part is applicable
-
Reed Switch, R300,R301U Series "C"
Part No. PD163296
$38.22- Reed Switch
- Used on various Robot Coupe models such as: BX 4, R300, R301, R301 Ultra (Series C) and where part is applicable.
-
S Blade, Coarse Serrated
Part No. PD3524510
$164.18- S Blade
- Course serrated
- Used on units with six side shaft.
- Use with cutting bowl only
- Used on various Robot Coupe models such as R300, R301, R301 Ultra and only where part is applicable.
NOTE: Not for R301 Series D or R301 Ultra Series D.
-
S BLADE, SMOOTH EDGE, HEX SHAFT *
Part No. PD1947510
$87.44- S Blade
- 7" Width
- 2 11/16" Depth
- Smooth edge
- Used on units with six sided HEX shaft.
- Use with cutting bowl only
- Used on various Robot Coupe models such as R172, R300, R301, R301 Ultra and only where part is applicable.
- Not for R301 Series D or R301 Ultra Series D.
- Not for Old Style model R-300
-
Screen R300, R301U Series C (C)
Part No. PD163139
$21.87- Commonly used on Robot Coupe models: R301U
- Please verify serial number when ordering
-
Screw Cover Disc
Part No. PD162156
$5.22- Black Disc Screw Cover
- 1" diameter
- These pieces usually get destroyed when removing to get to the screws that mount the motor to the motor support.
- Not recommended to re-use the ones removed because liquids could get down to the motor area
- Commonly used on Robot Coupe model R301 Ultra and where part is applicable.
-
SIDE BRACKETS, (PKG 2)
Part No. PD25709
$49.72- Locking Bush Set W/Screws
- Commonly used on Robot Coupe models: Blixer 3, Blixer 4, BX3 CL30, R301Ultra Series, R302, R402V
-
Spacer R300, R301U Series C
Part No. PD163138
$7.65- Commonly used on Robot Coupe models: R301 Ultra Series C
-
Strain Relief
Part No. PD162249
$8.25- Used on various Robot Coupe models such as: R2 (Old Style), R300, R300 Series B, R300 Series C, R301 Ultra, R301 Ultra Series B, R301 Ultra Series C, R4, R6 Series (R6N, R6B, R6C), R6V Series (R6VN, R6VB, R6VC), R2C (old style), R300 C, R300C Series B, R
-
Switch Panel Assembly R301U Series C (C)
Part No. PD163281
$244.04- Switch Assembly
- Includes front panel
- Used on Robot Coupe model R301 Ultra Series C and where part is applicable.