R100
-
-
BEARING LOWER, MOTOR
Part No. PD19361
$27.74- Motor bearing
- lower
- Commonly used on various Robot Coupe models such as Blixer 2, Blixer 3D, Blixer 4A, CL 50, CL 50 Gourmet, CL 50 Ultra, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL50E, R 300, R 301, R 301 Ultra, R100, R100 PLUS, R100B, R100BCLR, R101, R101 Plus CB, R101B, R3-1500, R301, R301 ULTRA, R301U, R401A and where part is applicable.
-
Blade, S, Serrated
Part No. PD40846
$128.24- SERRATED "S" BLADE
- Stainless Steel
- For cutting bowl
- Commonly used on various Robot Coupe models such as R100, R100 PLUS,R100B,R100BCLR, R101, R101B, R101 PLUS CB and only where part is applicable
-
Bottom Cushion Bushing
Part No. PD162762
$39.04- Absorber
- Bottom cushion bushing
- Commonly used on Robot Coupe models: Blixer 2, Blixer 3B, Blixer 3D, Blixer 4, Blixer 4A, R100, R100 PLUS, R100B, R100BCLR, R101, R101 PLUS CB, R101B, R2 Ultra Dice, R2DICE, R300, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, R401, R401A.
-
Bottom Cushion Bushing
Part No. PD38340
$28.68- Bottom Cushion Bushing
- Commonly used on Robot Coupe models such as R2B, R2N, R2N Ultra and only where applicable.
-
BOWL, 2.5 QT, (CLEAR)
Part No. PD3401850
$114.35- Clear Bowl
- Plastic
- 2.5 qt
- Use for mixing and cutting
- Comes with on-off pin assembly
- Commonly used on various Robot Coupe models such as R100, R100 Plus, R100B, R101, R101B, R101 Plus CB and only where part is applicable
-
BREAKER, 8 Amp, Push to Reset
Part No. PD3729410
$44.45- Breaker
- 8 amp
- 250 V AC Max
- 50 V DC Max
- Comes with screw on nut
- Used on Various Robot Coupe models such as R100, R100 PLUS, R2 old style, R2N, R2N Ultra, R2N-ULTRA and only where part is applicable.
-
-
CORD, W/PLUG R240, ROBOT COUPE
Part No. PD2550510
$53.63- Cord with plug
- SJTOW type
- 120 V
- 13 Amp
- 6' cord
- 3 wire
- 16 gauge
- Commonly used on various Robot Coupe models such as CL 30, CL 50, CL 52, CL 52-D, R 100, R 100 Plus, R 300, R100 PLUS, R100B, R100BCLR, R2B, R2N, R2N Ultra, R2N-ULTRA, R302 and only where part is applicable.
-
CUTTER BOWL LID, R2
Part No. PD1099410
$63.62- Lid
- Cutter Bowl
- Clear
- Use on various Robot Coupe models such as R100, R2 (Old Style), R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra (serial number series - R2Uxxxxx, serial number series - 231xxxxx03, serial number series - 245xxxxx03, serial number series - 247xxxxx03) and where part is applicable.
Also for
- Bowl Lid for model R211
- Round
- Clear plastic
- Used for blending only, not for lid for vegetable slicing
- This is for the French style model R111 too.
- Serial number starts with G666
-
CUTTER BOWL, 2.5 QT, GRAY
Part No. PD3068610
$114.25- Gray Container Bowl
- Comes with push pin assembly
- Plastic
- 2.5 quart bowl
- The original white bowl has been discontinued by the factory.
- Commonly used on various Robot coupe models such as R100, R100B, R101, R101B and only where part is applicable.
-
DATA PLATE, R100
Part No. PD38313
$34.58- Front plate
- Commonly used on Robot Coupe models such as R100 and only where part is applicable.
-
DISC-PLATE STORAGE RACK
Part No. PD1942050
$32.50- Storage Rack
- Metal
- Epoxy coating
- Holds up to 8 food processor discs
- 4 1/2" x 13 1/4" x 2 1/2"
- Prevent blades from hitting each other while in a storage drawer. Protects blade edge.
- Prevent employees from cutting themselves when handling these sharp blades.
- Used on various Robot Coupe models such as CL 30, CL 50, CL 55 Pusher, CL 60 Bulk, CL 60 Pusher, Food Processor, R 100, R 100 Plus, R 300, R 301 Ultra, R100, R100 PLUS, R101, R101 Plus CB, R2 Ultra Dice, R2N, R2N Ultra, R2N-ULTRA, R301 ULTRA, R301 Ultra Dice, R301U, R302, R302V, R4, R401A, R402 V. A, R402A, R4N, R4N SERIES D, R4X, R6, R602, R602E, R6N, R6V, R6VN, R6VN-D, R6X and only where part is applicable.
-
Fan Blade Only
Part No. PD41434
$26.98- Commonly used on Robot Coupe models: R100, CL30, CL50, R300 Series B
-
Foot, White (best practice to change 4)
Part No. PD1101010
$9.05- Foot for base
- White in color
- Used on various Robot Coupe models such as R100, R100CLR, R100 Plus, R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart-serial Number 246xxxxx05), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra and where part is applicable.
Note: Best practice is to always replace all 4 feet to ensure the proper balance of the unit and to avoid dangerous vibrations.
-
Grating Disc 6 mm (1/4") Coarse
Part No. PD2721810
$95.97- Coarse grating disc
- 6 mm (1/4")
- Diameter: 6 3/4"
- Fits old and new styles
- Commonly used on various Robot Coupe models such as R100, R100 Plus, R2N, R2N Ultra, R2 Dice, R300, R301 Ultra, R302, R302V, R401, R402V, CL30, R172 SERIES, R2, R2U, R2C, R2K, R3001U and only where part is applicable.
-
Grating Disc, 9 mm 11/32 Extra course
Part No. PD19389
$84.42- Extra course grating disc
- 11/32" (9 mm) diameter cuts
- Fits old and new styles
- Used on various Robot Coupe models such as R2N, R2N Ultra, R301 and only where part is applicable.
-
Grating Disc, Medium 2mm 5/64"
Part No. PD1938510
$84.42- Medium grating disc
- Medium Grating Plate, 1/8"
- 5/64" (2 mm) cuts
- Used on various Robot coupe models such as R100, R101, R101 Plus CB, R2N, R2N Ultra, R301 and only where part is applicable.
-
Grating Disc, Medium Coarse, 3 mm 1/8"
Part No. PD2554510
$84.42- Medium coarse grating disc
- 3 mm (1/8")
- Used on various Robot Coupe models such as R2N, R2N ultra, CL30 SERIES, R100 SERIES, R172 SERIES, R2, R2U, R2C SERIES, R2K SERIES, R2N SERIES, R300 SERIES, R301U, R301U SERIES, R302 SERIES and only where part is applicable.
-
GRATING PLATE, FINE 1.5MM 1/16"
Part No. PD1938410
$84.42- Fine Grating plate
- 1/16" (1 1/2 mm) cuts
- Used on various Robot Coupe models such as CL30, R100, R2C, R2N, R300, R300C, R301 ULTRA C, R301 ULTRA, R302, R302V, R401, R402V, R2-DICE, R2-DICE ULTRA and only where part is applicable.
-
Honing Stone
Part No. PD137042
$44.21- Commonly used on Robot Coupe models: R100, R100CLR, R100 Plus, R2 (Old Style), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra (serial number series - R2Uxxxxx Also, 231xxxxx03), R2N Ul
-
Julienne Disc, 2 x 2 mm (5/64)
Part No. PD1938810
$97.15- Julienne disc
- 5/64" x 5/64" (2 mm x 2 mm) cuts
- Fits old and new styles
- Used on various Robot Coupe models such as CL30 SERIES, R100 SERIES, R172 SERIES, R2, R2U, R2C SERIES,R2K SERIES, R2N SERIES, R2U SERIES, R300 SERIES, R301U SERIES, R302 SERIES and only where part is applicable.
-
LARGE PUSHER, SQ STYLE
Part No. PD3236210
$42.81- LARGE PUSHER
- SQUARE STYLE FOR STANDARD LID
- For Robot Coupe model: R100
-
LID ONLY, CLEAR, R100
Part No. PD2596350
$116.00- Lid.
- Used on various Robot Coupe models such as R100, R100CLR and only where part is applicable.
-
Motor Relay, 16/39 MTRP
Part No. PD29844
$75.94- Motor Relay
- MTRP
- 2 3/16" Height
- Commonly used on Robot Coupe models such as Blixer 2, CL-30, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL-52, J80 Ultra, R100, R100 PLUS, R100B, R100BCLR, R101, R101 PLUS CB, R101B, R300, R301, R301 ULTRA, R402A, CL-55 and only where part is applicable.
-
MOTOR SUPPORT
Part No. PD41281
$269.40- Gray only
- Comes with screw covers, shaft seal, front switch cover (has 2 switch holes) and side louver cover
- Commonly used on Robot Coupe model: R100
-
Motor Support Screw
Part No. PD162533
$3.18- Used on various Robot Coupe models such as: R100, R100CLR, R100 Plus, R100B and R100BCLR and where part is applicable.
-
MOTOR SUPPORT SEAL
Part No. PD19350
$28.94- Motor Support Seal
- 1 1/2" Outer Diameter
- Viton
- Used on various Robot Coupe models such as Blixer 2, Blixer 3D, Blixer 4, Blixer 4 Mono, Blixer 4 Tri, Blixer 4 V.V., Blixer 4A, Blixer 4VA, CL-30, J100 Ultra, J80 Ultra, R100, R100 PLUS, R100B, R100BCLR, R101, R101 Plus CB, R101B, R2, R2 Dice, R2 Dicing, R2 Dicing Ultra, R2 Ultra Dice, R2B, R2N, R2N Ultra, R2N-ULTRA, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, R301U, R302, R302V, R401, R401A, R402, R402 V. A, R402 V.V., R402A and only where part is applicable.
-
ON-OFF SWITCH ASSY
Part No. PD2111550
$60.60- On-Off Switch Assembly
- Assembly consists of
- front switch plate
- switch block (for 2 buttons)
- and switch
- Commonly used on Robot Coupe model: R100, R100CLR (not for R100PLUS)
-
ON/OFF PIN ASSEMBLY, for 2.5 QT Bowl
Part No. PD1100010
$10.55- ON/OFF PIN ASSEMBLY FOR WHITE OR GRAY 2.5 QT BOWL ONLY (GRAY BOWL HAS NO HANDLES)
- Also used for the continuous feed chute attachment on R2 units
- For clear bowl see PD1415310
- Commonly used on Robot Coupe models: where part is applicable
-
ON/OFF PUSH PIN ROD, 2.5 QT BOWL, CLEAR
Part No. PD1415310
$16.58- ON/OFF pin assembly for 2.5 clear bowl only
- Commonly used on Robot Coupe models: R100, R100CLR, R100 Plus, R2 (Old Style), R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2NCLR (serial Number-244
-
Plate Support Shaft
Part No. PD2920310
$28.35- Plate Support Shaft
- Commonly used on Robot Coupe models such as R100, R100 Plus, R101, R101 Plus and where part is applicable
-
RUBBER O-RING, BLACK
Part No. PD1939210
$6.24- Rubber O ring
- This is the rubber cover for the micro switch on the top of the base
- Provides motor compartment seal for on/off pin assembly plunger on bowl
- Also replaces previous red O-Ring on some models
- Used on various Robot Coupe models such as R100, R2, R2N, R2U, R4, R4B, R4C, R4N, R4X, R4Y, R60TS, R100 PLUS, R2 Dicing, R2 Dicing Ultra, R2N Ultra and only where part is applicable.
-
S Blade Smooth Edge (Not a counterfeit)
Part No. PD1099210
$102.98- Authentic OEM S Blade by Robot Coupe
- Longer lasting than counterfiets
- Smooth straight edge 'S' shaped blade
- Tip to Tip measurement is 7-1/4"
- Used on Various Robot Coupe Models Such As R2 (Old Style), R2N (serial number series - R2xxxxx Also, 230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxx ), R2N Ultra, R2N-ULTRA, 247xxxxx03 and only where part is applicable.
-
S-Blade, Smooth
Part No. PD1935810
$111.72- Smooth S Blade
- 7" Length
- 2.5" Width
- Outer Diameter1 13/16"
- Plastic Hub
- Stainless Steel Blade
- Gray Hub
- Commonly used on various Robot Coupe models such as R100, R100 PLUS, R100B, R100BCLR, R101, R101 Plus CB, R101B and only where part is applicable.
-
Safety Switch Assembly
Part No. PD1100610
$35.65- Safety Switch Assembly
- Mounts inside unit
- Complete with wire leads and new gasket
- Used on Various Robot Coupe Models such as R100, R100CLR, R100B, R100 Plus, R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR, R2N Ultra, XR2U
This is also used on some 220V 50HZ models.
-
Screw (Base-MS 3.9 x 19), Torx
Part No. PD25525
$4.41- Screw for base
- Torx
- Each
- Commonly Used on various Robot Coupe models such as R2, R2NBlixer 3, R 2 Dicing, R 2 Ultra Dicing, R100 PLUS, R100B, R100BCLR, R2 Dice, R2 Ultra Dice, R2N, R2N Ultra, R2N-ULTRA and only where part is applicable.
Torx Bit Required (Place in search box PD25525)
-
Screw Cover
Part No. PD162167
$7.83- Screw Cover
- Covers screw hole on top off unit.
- Plastic
- Helps keep particles from getting down into the motor
- Commonly used on Robot Coupe models: R100, R100CLR, R100 Plus, R100B and R100BCLR
-
Slicing Disc, 6 mm 1/4"
Part No. PD1105510
$94.44- Julienne Plate
- 4mm x 4mm
- 5/32"
- Used on various Robot Coupe models such as R2, RN, R2N Ultra, R2 Dice,R100, R301, R401, R402V, CL-30A and only where part is applicable.
-
SMALL PUSHER, 7-1/2"
Part No. PD2913810
$23.67- Vegetable Pusher
- Small
- 7-½" height
- Used on various Robot Coupe models such as R2, R2N, R2N CLR and where part is applicable.
-
SMALL PUSHER, ROUND
Part No. PD3623310
$28.40- Small Vegetable Pusher
- Grey
- Plastic
- Commonly used on various Robot Coupe models such as R2, R2U,R2N, R100, R101, R101 Plus CB, R100 Plus and only where part is applicable.
-
SPRING
Part No. PD1936610
$9.73- Spring
- 3/8" Outer Diameter
- Steel
- 15/16" Length
- Used on various Robot Coupe models such as Food Processor, R 2 Ultra Dicing, R100, R100 PLUS, R100B, R100BCLR, R2 Dicing Ultra, R2 Ultra Dice, R2B, R2N Ultra, R2N-ULTRA, R4, Robot Coupe Food Processor
-
Strain Relief
Part No. PD162238
$8.05- Strain Relief
- Commonly used on Robot Coupe models: R100, R100CLR, R100 Plus, R101, R101B, R101 Plus, R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra and where part is applicable
-
Top Bearing, R100
Part No. PD162179
$24.89- Top Motor Bearing
- Used on various Robot Coupe Models Such As R100, R100CLR, R100 Plus, R100B and R100BCLR
-
Vent Cover (G)
Part No. PD162859
$26.24- Commonly used on Robot Coupe models: (G) Vent Cover Use on Blixer 2, Blixer 3D, Blixer 4, Blixer 4 Mono, Blixer 4 Tri, Blixer 4 V.V., Blixer 4A, Blixer 4VA, CL-30, R100, R101, R101 Plus CB, R101B, R2N Ultra, R2N-ULTRA, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, R401, R401A, R402, R402 V. A, R402 V.V., R402A & where part is applicable