Parts by Factory OEM Part Number (U)
-
-
-
A-Kit, Upper Rince Arm Replacement
Part No. PD38624
$213.80- Upper Rinse Arm Kit
- Commonly used on Jackson models such as: AJ-100CE, AJ-100CGP, AJ-100CS, AJ-44CE, AJ-44CEL, AJ-44CGP, AJ-44CS, AJ-44CSL, AJ-54CE, AJ-54CGP, AJ-54CS, AJ-64CE, AJ-64CS, AJ-66CE, AJ-66CEL, AJ-66CGP, AJ-66CS, AJ-66CSL, AJ-76CE, AJ-76CGP, AJ-76CS, AJ-80CE, AJ-80CEL, AJ-80CS, AJ-80CSL, AJ-86CE, AJ-86CGP, AJ-86CS, AJ-90CE, AJ-90CS and where applicable.
CONDENSOR UNIT KIT 120V 60HZ
Part No. PD177831
$1,252.06- Condenser Unit Kit
- 120V
- 60Hz
- Commonly used on Duke models and where applicable.
Fitting, Union 90 Deg Elbow
Part No. PD40858
$17.62- Fitting Union
- 90 Deg Elbow
- Commonly used on Grindmaster models such as: FM-28A, GF-28A and where applicable.
Grommet, Umbrella
Part No. PD198776
$7.02- Grommet Umbrella
- 1/2 center hole
- Rubber Grommet
- Commonly used on Henny Penny models such as: 500, 600, CFA-500, CFA-600, Henny Penny, OFG-390, OFG-391, PFE-500, PFE-500-CFA, PFE-561, PFE-580KFC, PFE-581, PFE-590, PFE-591, PFE-592, PFE-600, PFG-500, PFG-561, PFG-600, PFG-680KFC, PFG-690, PFG-691 and where part is applicable.
ON OFF SWITCH
Part No. PD45347
$44.00- Switch
- On /off
- Toggle
- Commonly used on various Uniworld models such as TC12MG and where part is applicable.
SCREW, SOCKET HEAD SET
Part No. PD138758
$0.84- Screw Socket
- Head set
- 10-32" x 3/8"
- Commonly used on various Univex models and where part is applicable.
TC-12-MG X BLADE
Part No. PD45348
$24.75- X knife
- Commonly used on various Uniworld models such as TC-12-MG and where part is applicable.
U-CLIP - TINNERMAN MT/SLM48
Part No. PD154973
$7.88- Commonly used on Beverage Air models such as: MT21, MT23, MT27, MT33, MT35, MT38, MT45, MT49, MT66, MT72 and where applicable.
UNIT, COND TRI-RAIL 5&6
Part No. PD177834
$734.70- Condenser Unit Kit
- Commonly used on Duke models and where applicable.
UNIT, COND.1/4HP R134A 120V
Part No. PD177832
$859.95- Condenser Unit Kit
- 120V
- 1/4HP
- Commonly used on Duke models such as 315-25PG/SS, 316-25PG/SS, 327-25PG/SS, ADI-1M, ADI-1MD, AHC-5C, AHC-5M, AHC-6M, AHC-7M, DPAH-2M-4M, HB3CM, HB4CM, HB5CM, TCM-32PG/SS, TCM-88PG/SS and where applicable.
UNIT, ELEMENT, HEATING INNER TUBULAR
Part No. PD140011
$232.89- Tubular Element
- Inner
- Heating
- Used in Southbend and Toastmaster units where applicable.
Stock is limited.
UPPER ADJ. ROLLER DS12
Part No. PD138107
$265.88- Commonly used on various Univex models such as DS12 and where part is applicable.
UPPER ADJ. SHAFT DS12
Part No. PD138109
$332.34- Commonly used on various Univex models such as DS12 and where part is applicable.
UPPER Bearing
Part No. PD51229
$120.12- Commonly Used on Master Disposer Model: C2-L MUST provide Model and Serial when ordering
UPPER DOOR GASKET 20-3/4 INCHES LONG
Part No. PD39141
$41.41- Door Seal
- Commonly used on MOYER DIEBEL models such as: TUW, 501-HT, 501-HTN, 501-LT, 501HT, 401-HTM2 PLUS, 401-HTNM2 PLUS, 401-LTM2 PLUS, 401LT, I-UH, TUW, U-BW, UH-150, UH-150B, UL-150, UTL and where applicable.