Legs-Feet, Equipment Appliance
-
5/8" Threaded Die Cast Equip Leg
Part No. PD168044
$29.04- Die Cast Equipment Leg
- Mounting: 5/8" Threaded Stud
- 6" leg with 1" adjustment
- Stainless steel foot
- Finish: Satin-Nickel Matte Finish to Match Stainless Steel
-
Adjustable Equipment leg, 1/2-13 Stud
Part No. PD126875
$18.90- Adjustable Equipment Leg
- Hex foot
- Round
- Adjustable 1-1/4"
- Mounting Type 1/2-13 Stud
- Height 6"
- Flush stud with plate
- Top Diameter 2-3/8"
- Plastic
- Black
-
Adjustable Equipment leg, 5/8-11 Stud
Part No. PD126877
$35.58- Adjustable Equipment Leg
- Adjustable 1-1/4"
- Mounting Type 5/8-11 Stud
- Height 6"
- Top Diameter 2-3/8"
- 2,000 pound load capacity
- Leg Material Dia Cast Zamak
- Leg Finish Nickel
-
Adjustable Foot Only
Part No. PD38060
$20.32- Adjustable foot only for 6 " leg
- 1-1/2" to 2-5/8" adjustment
- For a 1-1/4" pipe
- Stainless steel
- Load capacity 2000 pounds
- Commonly Used on Imperial Models: ICB-4827, ICB-4836, ICB-6027, ICB-6036, ICRA-1, ICRA-2, ICRA-3, ICRA-4, ICRA-5, ICV, ICVD, IDR-37, IDR-49, IDR-61, IF-25, IF-75, IF-BL SERIES, IFS-40, IFS-50, IR-2000-24, IR-2000-36, IR-2000-48, IR-2000-60, IR-2000-72, IRFS-40, IRFS-50, ISP-J-SP, ISP-J-SP2, ISP-J-W13, ISP-J-W16, ISPA-18, ISPA-18-2, ISPA-18W, ISPA-18W-2, MSQ-30, MSQ-36, MSQ-48, MSQ-60 and were applicable.
-
AJUSTABLE LEG (1/2-13, 6" H, S/S)
Part No. PD231308
$29.09- 6" Stainless Steel Leg
- Satin finish
- Adjustable 1-1/2"
- 1/2-13 mounting stud
- Load capcity 8,000 lb per set of 4 legs
-
Appliance Leg - Satin Nickel 4"
Part No. PD43313
$38.42- Adjustable Appliance Leg
- Mounting Type 3/8-16 Stud
- Height 4"-5-3/4"
- 1-7/16"
- 5/8"
- Foot Type Flange
- Leg Material Diameter Cast Metal
- Lag Finish Satin Nickel
-
Appliance Leg, 2-1/2", Adjustable
Part No. PD168039
$19.66- Appliance Leg
- Length: 2-1/2"
- 1" adjustment
- 1-1/4" W at top OD
- Zinc die cast
- 3/8" x #16 stem thread
- Finish: Satin-Nickel Matte Finish to Match Stainless Steel
- Foot: Nickel
-
BULLET FEET 1-5/8" OD, ZINC
Part No. PD21626
$8.37- Bullet foot for equipment
- Used for square tubing and round pipe.
- Fits 1-5/8" OD tubing
- 1-1/4 to 2-3/8" height adjustment
- Die cast Zinc
- Hex foot
-
Bullet Foot Only
Part No. PD168046
$10.98- Bullet' Foot Only
- Stainless steel foot
- Base is 2" x 1-5/8"
- Finish: Satin-Nickel Matte Finish to Match Stainless Steel
-
Counter Equipment Leg, 4"
Part No. PD43030
$31.32- Stem leg, threaded
- Heavy Duty Stainless Steel
- 5/16 - 18"
- 4" height
- Adjustable 1-3/4"
- Hex foot
- Satin metal finish
-
Die Cast Equipment Leg
Part No. PD212108
$29.18- Die Cast Equipment Leg
- Mounting: 3-1/2" x 3-1/2" Plate
- 6" leg with 1" adjustment
- Stainless steel foot
- Finish: Satin-Nickel Matte Finish to Match Stainless Steel
-
Equipment Legs Stainless Steel
Part No. PD212114
$60.14- Stainless Steel Equipment Legs
- Mounting: 3-1/2" x 3-1/2" Plate
- 6" leg with 3" adjustment
- Stainless steel foot
- Finish: Brushed Stainless
-
FOOT (RD, S/S, 1-5/8 OD)
Part No. PD231288
$6.09- Stainless Steel Bullet Foot
- Use for 1-5/8" OD round tubing
- 1-1/2" adjustable
- Load capacity 2000 lbs
-
FOOT (ZINC, 1-1/4 PIPE RD)
Part No. PD46201
$8.56- Insert and Foot
- 1-1/4" - 2-3/8" height
- Adjustable
- Zinc die cast
- For 1/4" pipe
- 2000 lb load capacity
- Commonly used on equipment and where part is applicable on various manufacturers.
-
Foot, Bullet, Adjustable
Part No. PD45857
$17.47- Foot, Bullet
- 1-1/2 to 2-5/8" adjustable
- 16GA
- 2000 pound capcity
- Use for 1-1/4" pipe
-
-
LEG (3/8-16, 4H, PLST, BLK)
Part No. PD231318
$8.61- Appliance Leg
- 3/8-16
- 4" H
- Black
- Plastic
- Used where part is applicable.
-
Leg W/Mounting Plate, 6"
Part No. PD126889
$35.42- Adjustable Equipment Leg
- 1-3/4" adjustment
- Hex foot
- 2000 lb per leg
- 8000 lb per set of 4 leg
- 2-5/8" mounting hole centers
- 1/2-13 stud
- Mounting Type: 3-1/2" sq. removable mount plate
- Height 6"
- Diameter 1-5/8"
- Leg Material Heavy Duty Stainless Steel
-
LEG, 1-1/2"
Part No. PD41834
$13.59- Leg, chrome
- Plastic
- Stud 1/4-20
- Round
- Adjustable 1" to 1-1/2"
- General use
-
-
-
Leg, 6", 3-1/2" Removable Mount Plate
Part No. PD126884
$26.84- Adjustable Equipment Leg
- Adjustable to 1 1/4"
- Mounting Type: 3-1/2" sq. removable mount plate
- Light duty application
- Height 6"
- Diameter 2-3/8"
- Screw centers 2-5/8"
- Load capacity 2000 pounds
- Leg Finish Black Epoxy
- Sold by each
-
LEG, ADJUSTABLE
Part No. PD126898
$4.90- Adjustable Appliance Leg
- Mounting Type 1/4-20 Stud
- Height 1"-1-1/2"
- A=13/16"
- B=1"
- Foot Type Round
- Leg Material Thermoplastic
- Leg Finish Black Plastic
-
Leg, Adjustable
Part No. PD231316
$16.17- Adjustable Appliance Leg
- Mounting Type 3/8-16 Stud
- Height 4"-5-3/4"
- 1-3/4"
- 5/8"
- Foot Type Flange
- Leg Material Thermoplastic
- Lag Finish Chrome
-
Leg, Adjustable, 4 Pack
Part No. PD45913
$46.88- Adjustable Appliance Leg
- Mounting Type 1/4-16 Stud
- Height 1"-1-1/2"
- 13/16"
- 1/2"
- Foot Type Round
- Leg Material Thermoplastic
- Leg Finish Black
- 4 pack
-
LEG, APPL-BLACK PLASTIC FLANGE FOOT
Part No. PD126897
$8.61- Adjustable Appliance Leg
- Mounting Type 3/8-16 Stud
- Height 4"-5-3/4"
- A=1-3/4"
- B=5/8"
- Foot Type Flange
- leg Material Thermoplastic
- Lag Finish Black
-
LEG, APPL-CHRM PLASTIC FLNG FT
Part No. PD126896
$34.73- Adjustable Appliance Leg
- Mounting Type 3/8-16 Stud
- Height 4"-5-3/4"
- A=1-3/4"
- B=5/8"
- Foot Type Flange
- leg Material Thermoplastic
- Lag Finish Chrome
-
LEG, APPL-GRAY PLASTIC HEX FT
Part No. PD126892
$8.00- Adjustable Appliance Leg
- Mounting Type 3/8-16 Stud
- Height 4"-5-3/4"
- A=1-3/4"
- B=5/8"
- Foot Type Hex
- leg Material Thermoplastic
- Leg Finish Gray
-
LEG, APPL-SATIN NICKEL HEX FT
Part No. PD126890
$22.42- Adjustable Appliance Leg
- Mounting Type 3/8-16 Stud
- Height 4"-5-1/2"
- A=1-7/16"
- B=3/8"
- Foot Type Hex
- leg Material Die Cast Metal
- Leg Finish Satin Nickel
-
Leg, Appliance 4"
Part No. PD168042
$12.14- Appliance Leg
- Length: 4"
- 1" adjustment
- Zinc die cast
- 3/8" x #16 stem thread
- Finish: Satin-Nickel Matte Finish to Match Stainless Steel
- Foot: Nickel
-
Leg, Appliance 6" Stainless
Part No. PD231327
$39.97- Stainless Steel Leg
- 6" Leg with 1-1/4" Adjustable Foot
- 1/2"-13 Stud Mount
- Nickel Finish
- 2-3/8" Diameter
- Use where part is applicable
-
Leg, Appliance 6" Stainless
Part No. PD46544
$39.97- Stainless Steel Leg
- 6" Leg
- 1-1/4" Adjustable Foot
- 1/2"-13 Stud Mount
- Nickel Finish
- 2-3/8" Diameter
- Use where part is applicable
-
Leg, Appliance 6" Stainless 5/8 SPT Stem
Part No. PD44760
$49.31- Stainless Steel Leg
- 6" Leg with 1-1/4" Adjustable Foot
- 1/2"-13 Stud Mount
- Nickel Finish
- 2-3/8" Diameter
- Use where part is applicable
-
LEG, APPLIANCE, BLACK PLASTIC 4"
Part No. PD126891
$16.20- Adjustable Appliance Leg
- Mounting Type 3/8-16 Stud
- Height 4"-5-3/4"
- 1-3/4"
- 5/8"
- Foot Type Hex
- leg Material Thermoplastic
- Leg Finish Black
-
LEG, APPLIANCE, SATIN NICKEL
Part No. PD126895
$38.42- Adjustable Appliance Leg
- Mounting Type 3/8-16 Stud
- Height 4"-5-3/4"
- 1-7/16" x 5/8"
- Foot Type Flange
- Diameter Cast Metal
- Finish Satin Nickel
-
Leg, Die Cast Zamak, Gray Epoxy Finish
Part No. PD231344
$28.04- Appliance Leg
- Die Cast Zamak
- Gray Epoxy Finish
- Hex foot
- 2-3/8" OD
- 3/4" 1/2-13 threaded stud
- 6" high
- 1-1/4" adjustment
- 2000 pounds load capacity per leg
- NSF
-
LEG, EQUIPMENT - BLACK
Part No. PD126883
$40.54- Adjustable Equipment Leg
- Mounting Type 3-1/2" Sq. Removable Mount Plate
- Height 6"
- Diameter 2-3/8"
- 1-1/4" adjustable foot
- 2-5/8" mounting holes
- 2000 pounds per leg
- Leg Material Die Cast Zamak
- Leg Finish Black Epoxy
-
LEG, EQUIPMENT - BLACK EPOXY
Part No. PD126872
$37.88- Adjustable Equipment Leg
- Mounting Type 1/2-13 Stud
- Height 6"
- Diameter 2-3/8"
- Adjustable to 1-1/4"
- Leg Material Die Cast Zamak
- Leg Finish Black Epoxy
- Hex foot
- 2000 pounds static load per leg
-
LEG, EQUIPMENT - GRAY
Part No. PD126873
$37.80- Adjustable Equipment Leg
- Mounting Type 1/2-13 Stud
- Height 6"
- Dia 2-3/8"
- Leg Material Dia Cast Zamak
- Leg Finish Gray Epoxy
-
LEG, EQUIPMENT - GRAY
Part No. PD126878
$21.31- Adjustable Equipment Leg
- Mounting Type 5/8-11 Stud
- Height 6"
- Dia 2-3/8"
- Leg Material Dia Cast Zamak
- Leg Finish Gray Epoxy
-
LEG, EQUIPMENT - NICKEL
Part No. PD126885
$36.10- Adjustable Equipment Leg
- Mounting Type 3-1/2"Sq. Removable Mount Plate
- Height 6"
- Dia 2-3/8"
- Leg Material Dia Cast Zamak
- Leg Finish Nickel
-
LEG, EQUIPMENT - NICKEL, PLATE MOUNT
Part No. PD54167
$36.10- Adjustable Equipment Leg
- Mounting Type 3-1/2" Sq. Removable Mount Plate
- Height 6"
- Diameter 2-3/8"
- 1-1/4" adjustable foot
- 2-5/8" mounting holes
- 2000 pounds per leg
- Leg Material Die Cast Zamak
- Leg Finish Nickel
-
LEG, EQUIPMENT 4" SS
Part No. PD126888
$42.29- Adjustable Equipment Leg
- Mounting Type 3-1/2" Sq. Removable Mount Plate
- Stainless Steel
- Height 4"
- 1-5/8" OD
- Adjustable 1-3/4"
- Material Heavy Duty
-
LEG, EQUIPMENT, NICKEL
Part No. PD126874
$39.97- Adjustable Equipment Leg
- Mounting Type 1/2-13 Stud
- Height 6"
- Diameter 2-3/8"
- Leg Material Die Cast Zamak
- Leg Finish Nickel
-
LEG, EQUIPMENT, NICKEL, 6"
Part No. PD46545
$154.92- Adjustable Equipment Leg
- Mounting Type 1/2-13 Stud
- Height 6"
- Diameter 2-3/8"
- Leg Material Die Cast Zamak
- Leg Finish Nickel
-
LEG, EQUIPMENT, S/S W/MOUNT PLATE
Part No. PD126887
$45.93- Adjustable Equipment Leg
- 6" with 1-3/4" adjustment
- Hex foot
- 2000 lbs per leg load capacity
- 2-5/8" mounting hole centers
- Mounting Type 3-1/2" Sq.
- Removable Mount Plate
- Heavy duty stainless steel
- Height 6"
- Diameter 2"
- Leg Material Heavy Duty Stainless Steel
-
LEG, EQUIPMENT- S/S W/MOUNT STD
Part No. PD126881
$37.28- Adjustable Equipment Leg
- Mounting Type 3/4-10 Stud
- Height 6"
- Diameter 2" top
- Up to 1-3/4" adjustment
- 2000 lbs per leg
- Leg Material Heavy Duty Stainless Steel
-
LEG, FLANGED (3/8-16, 4H, NP)
Part No. PD231341
$23.91- Leg
- Appliance
- 4"
- 1" adjustment
- Zamak Matt satin finish
- 3/8-16 Thread stud
-
Leg, Stainless Steel Adjustable
Part No. PD21612
$76.93- Stainless Steel Leg
- Satin Finish
- 36 in (H), foot can adjust up to 1 1/12 in for 37 1/12 (H)
- 3 1/2 in (L) x 2 5/8 in (W) plate dimensions
- 1 5/8 in outside leg diameter
- Stainless steel construction
- 2,000 lbs load capacity (per leg)
- 8000lb Capacity Per Set of 4
-
Leg, Threaded Die Cast, 1/2"
Part No. PD168043
$53.24- Die Cast Equipment Leg
- Mounting: 1/2"-13 Threaded Stud
- 6" leg with 1" adjustment
- 2-3/8' diameter
- Stainless steel foot, hex
- 2000 lb per leg
- Finish: Satin-Nickel Matte Finish to Match Stainless Steel
- Used on Montague models such as UF, UFR, UFS, UFSR, UFSCR 12/15/98 to current.
136 series, G16, G26 (all models 12/15/98 to current only).
-
PLASTIC BULLET FOOT 1-5/8 OD
Part No. PD38372
$6.32- Bullet Foot
- Plastic
- Commonly found on worktable legs
- Prevents rust spots on floor
- For tubing style legs
- Hex type foot tip
- 1-5/8" OD
- 3-1/2" H
- 9/16" stud D hole
- Adjustable 3-5" - 4.5"
-
Plate Only
Part No. PD168047
$9.28- Plate Only
- Stainless steel foot
- Finish: Satin-Nickel Matte Finish to Match Stainless Steel
-
-
Socket, Leg, Plate Mount
Part No. PD231303
$21.95- Plate Mount Leg Socket
- Stainless Steel
- 3-1/2" x 3-1/2" Plate
- For 1-1/4" pipe
- For 1-1/2" or 1-5/8" OD tubing
- 2-5/8" screw centers
-
Threaded Equipment Leg SS
Part No. PD168070
$40.80- Equipment Leg Stainless Steel
- Mounting: 3/4" Threaded Stud
- 6" leg with 3" adjustment
- Stainless steel foot
- Finish: Brushed Stainless