1+404-794-8110 / USA 800-366-9709
800-366-9709
Browse By

Filter

Category
  1. External Grease Trap Parts - 50GPM
  2. Internal Grease Trap Parts - 50 GPM

External Grease Trap Parts - 50GPM

Grease Trap Parts for 50 GPM Endura grease interceptors - external parts.

18 Part(s)

Set Descending Direction
per page
  1. AIR ADMITTANCE VALVE ABS

    AIR ADMITTANCE VALVE ABS

    Part No. PD46279

    $57.60
    • Air Admittance Venting Valve
    • ABS 
    • 1-1/2" and 2"
    • Allows air to enter the drainage system while preventing sewer gases from escaping.
    • Opens under negative pressure in the piping system while remaining closed if there is positive or air pressure.
    • Eliminating the need for external venting.
    • 3" & 4" for stack type venting.
    • Where local jurisdiction allows an AAV can be used as an alternative to traditional venting practice.

  2. AIR ADMITTANCE VALVE PVC

    AIR ADMITTANCE VALVE PVC

    Part No. PD54965

    $83.30
    • Air Admittance Venting Valve
    • PVC
    • 1-1/2" and 2"
    • Allows air to enter the drainage system while preventing sewer gases from escaping.
    • Opens under negative pressure in the piping system while remaining closed if there is positive or air pressure.
    • Eliminating the need for external venting.
    • 3" & 4" for stack type venting.
    • Where local jurisdiction allows an AAV can be used as an alternative to traditional venting practice. 

  3. Cleanout with Lid 3"

    Cleanout with Lid 3"

    Part No. KS107217A

    $81.60
    • Cleanout 
    • Connection Size - 3”
    • Flow Rate - 50 g.p.m. (3.15 liters/sec.)
    • PVC
    • Gray
    • 1 piece
    • Hand twist off lid
    • Use on Canplas Endura models 3950A03, 3950A04

  4. Flow Control Extension Kit 3"

    Flow Control Extension Kit 3"

    Part No. PD45908

    $36.01
    • Flow Control Extension Kit
    • 3"
    • The lower ring fits over the outside of the access opening on the top of the flow control body, allowing the installer to maintain a clean sleeve (using pipe) up to finished floor level. This part is used with a 3” flow control.
    • This item is not available for the 2" flow controls. 2" flow controls cannot be buried below ground, against plumbing codes in many areas.

  5. Flow Control Extension Kit 4"

    Flow Control Extension Kit 4"

    Part No. PD45909

    $29.50
    • Flow Control Extension Kit
    • 4"
    • The lower ring fits over the outside of the access opening on the top of the flow control body, allowing the installer to maintain a clean sleeve (using pipe) up to finished floor level. This part is used with a 4” flow control.
    • This item is not available for the 2" flow controls. 2" flow controls cannot be buried below ground, against plumbing codes in many areas.

  6. Flow Control, Cleanout, Air Intake 3" 50

    Flow Control, Cleanout, Air Intake 3" 50

    Part No. KS107217

    $81.60
    • Flow Control
    • with Cleanout and Air Intake
    • Connection Size - 3”
    • Flow Rate - 50 g.p.m. (3.15 liters/sec.)
    • PVC
    • Gray
    • 2 piece
    • Use on models 3950A03, 3950A04

  7. Flow Control, Cleanout, Air Intake 4" 50

    Flow Control, Cleanout, Air Intake 4" 50

    Part No. KS107219

    $111.35
    • Flow Control
    • with Cleanout and Air Intake
    • PVC
    • Gray
    • Connection Size - 4” hub
    • Flow Rate - 50 g.p.m. (3.15 liters/sec.)

    Original item number 3934150 for this part was discontinued by the factory. This is the replacement. It might not look exactly like yours you're replacing if it is the old style unit.

  8. Flow Control, Spigot Format 3" 50 GPM

    Flow Control, Spigot Format 3" 50 GPM

    Part No. PD227211

    $106.25
    • Flow Control
    • Spigot Format
    • with Cleanout and Air Intake
    • Gray
    • PVC
    • Connection Size 3” hub
    • Flow Rate 50 g.p.m. (3.15 liters/sec.)
    • 2 piece
    • Use on models 3950A03, 3950A04

  9. Flow Control, Spigot Format 4" 50GPM

    Flow Control, Spigot Format 4" 50GPM

    Part No. PD227213

    $129.20
    • Flow Control
    • Spigot Format 
    • with Cleanout and Air Intake
    • Gray
    • PVC
    • Connection Size 4” hub
    • Flow Rate 50 g.p.m. (3.15 liters/sec.)

  10. Flow Control, Threaded Format 3" 50GPM

    Flow Control, Threaded Format 3" 50GPM

    Part No. PD227210

    $90.95
    • Flow Control
    • Threaded Format
    • with Cleanout and Air Intake
    • Gray
    • PVC
    • Connection Size 3” hub
    • Flow Rate 50 g.p.m. (3.15 liters/sec.)
    • 2 piece
    • Use on models 3950A03, 3950A04

  11. Flow Control, Threaded Format 4" 50GPM

    Flow Control, Threaded Format 4" 50GPM

    Part No. PD227212

    $129.20
    • Flow Control
    • Threaded Format
    • with Cleanout and Air Intake
    • Gray
    • PVC
    • Connection Size 4” hub
    • Flow Rate 50 g.p.m. (3.15 liters/sec.)

  12. GI Lid Fixing Replacement Refurb Kit

    GI Lid Fixing Replacement Refurb Kit

    Part No. PD42543

    $13.13
    • Lid Repair Kit
    • Used to replace stripped or loosened cover fixing locations.
    • Screw is approx 1-5/8"
    • Sheath is approx 3/4"

  13. In-line Drain Strainer ABS DWV

    In-line Drain Strainer ABS DWV

    Part No. PD227221

    $146.20
    • In-Line Drain Strainer
    • Material: ABS
    • Size: 1-1/2”
    • Installed as an integrated part of the plumbing to prevent blockages.

  14. In-Line Drain Strainer PVC DWV

    In-Line Drain Strainer PVC DWV

    Part No. PD227222

    $146.20
    • In-Line Drain Strainer
    • Material: PVC
    • Size: 1-1/2”
    • Installed as an integrated part of the plumbing to prevent blockages.

  15. Replacement Latch Kit 25LO-35-50

    Replacement Latch Kit 25LO-35-50

    Part No. KS107226

    $47.51
    • Replacement Latch Kits
    • Lid Size - 25LO-35-50
    • Kit includes 4 x latch components (2 LH & 2 RH) and replacement pivot pins
    • Used with GI models: 3925A02LO, 3935A03, 3935A04, 3950A03, 3950A04

  16. Replacement Strainer & Access Cap ABS

    Replacement Strainer & Access Cap ABS

    Part No. PD42541

    $75.98
    • Replacement Strainer & Access Cap
    • ABS
    • Includes
      • access cap
      • filter screen
      • o-ring seal
    • Connection size 1-1/2"
    • Used with models: 3915A02, 3920A02, 3925A03

  17. Riser Extention Set 25LO-35-50

    Riser Extention Set 25LO-35-50

    Part No. KS107221

    $654.50
    • Grease Interceptor Recess Extension Riser
    • Tank Size - 25LO, 35, 50GPM
    • 6" 
    • Used with GI models:  3925A02LO, 3935A03, 3935A04, 3950A03, 3950A04

  18. Semi-Auto Draw Off 3/4"

    Semi-Auto Draw Off 3/4"

    Part No. KS107224

    $169.15
    • The Endura® Grease Draw Off is a convenient accessory that simplifies regular cleaning and prevents the need for cover removal with the associated release of foul odor. As a result, employees are less resistant to maintaining a regular cleaning schedule.
    • Spout not included
    • Other benefits include:
      • Universal to all Endura Grease Interceptor models
      • Simple means of regular grease removal
      • Can be fitted at or after installation of the grease interceptor
      • Flexibility of location and positioned by installer to avoid obstructions
    • Commonly used on Endura GI models: 3925A03, 3935A03, 3950A03 
    • (required for Philadelphia, PA code)
    • Kit Components:
      • 1 x Threaded bulkhead assembly
      • 1 x 1” Threaded nipple
      • 1 x Draw-Off Valve
      • 1 x Sch 40 90 Degree S x Skt Elbow.
    • Also Required: 1 x Ball Valve (Diameter to suit Endura outlet drainage) Not included in kit.

18 Part(s)

Set Descending Direction
per page
Commercial Kitchen Equipment Parts and Cleaning Stuff © Copyright 2021 SupplyDIRECT, Inc. All Rights Reserved. Atlanta, Georgia