IN-SINK-ERATOR
-
ADAPTER, MOUNTING, RING
Part No. PD41651
$232.15- Mounting Ring Adapter
- 6-5/8" Diameter, ID
- 1" Height
- Used on Salvajor/Insinkerator disposals
- Requires support legs
-
BEARING SEAL KIT
Part No. PD11073
$219.03- Bearing and seal kit
- Commonly used on In-sink-erator models such as SS-300, SS1000, SS300, SS500, SS750 and where part is applicable.
-
Bearing Seal Kit, Upper Bearing
Part No. PD11062
$157.83- Upper Bearings
- Seal Kit
- Lower bearing not included in kit
- Used on various Insinkerator models such as SS150-30, SS150-36, SS100, SS100-28, SS100-30, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS50-26, SS50-28, SS75-27, SS75-29, and where part is applicable.
-
Bearing, Lower
Part No. PD53126
$36.06- Lower Bearing
- 1.575" OD x .670" ID x .472" wide
- Double sheath
- Used on various InSinkerator models such as SS100, SS100-28, SS100-30, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS50-26, SS50-28, SS75-27, SS75-29 where part is applicable.
-
Bearing, upper assembly
Part No. PD41847
$103.49- Upper bearing assembly
- used in various In-Sink-Erator models such as SS100, SS100-28, SS100-30, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS50-26, SS50-28, SS75-27, SS75-29 and where part is applicable.
-
BODY CONTAINER
Part No. PD33621.5
$154.01- Upper Body Assembly
- Body container
- Does not include flange and gasket
- Used on Various Insinkerator Models such as SS150, SS200
-
Circuit Board
Part No. PD42103
$288.11- Circuit Board
- Commonly used on Insinkerator models such as: AS-101K, WX-101A and where part is applicable.
-
Control Box
Part No. PD38528
$1,406.79- Control
- Info needed to order
- Voltage
- Phase
- Commonly used on Insinkerator models and where part is applicable.
-
Controller w/Auto Reverse
Part No. PD38480
$1,136.85- Controller
- Commonly used on Insinkerator models and where part is applicable.
-
Cover, Bottom
Part No. PD53171
$63.16- Bottom Disposer Cover
- Used on various In-Sinkerator Models such as SS150, SS200, and where part is applicable
-
DISPOSAL, 2 HP
Part No. PD19821
$2,989.43- Disposer
- Be sure to specify voltage
- Commonly used in: restaurants, hotels, hospitals and cafeterias
-
-
DOOR DISCONNECT SWITCH KIT
Part No. PD44829
$169.72- Door Disconnect Switch Kit
- Used on various Insinkerator models such as AS-101K, WX-101A, CC101K-4 and where part is applicable.
-
-
END BELL ASSEMBLY
Part No. PD61155
$411.74- End Bell Assembly
- Includes
- Upper Bearing Assembly
- Shield
- Spacer Sleeve and Seal Assembly
- Slinger
- Tailpipe Gasket and Flange
- Diameter is 9-3/8"
- Center of Threaded Hole to Center of Threaded Hole is 8-1/4"
- Commonly used on In-Sink-Erator models Series SS150 and SS200 and where part is applicable
-
Flange Gasket
Part No. PD53937
$17.41- Flange Gasket for #5 Sink Adapter
- Black
- Rubber
- 3 7/8" OD
- Fits opening 3 1/2"
- Commonly used on various In-Sink-Erator models where part is applicable.
-
FLANGE TAIL PIPE
Part No. PD10976
$27.26- 3" Outlet Flange
- Used on various In-sink-erator models such as: SS1000, SS300, SS500, SS750 and where part is applicable.
-
Flange, Mounting
Part No. PD10951.5
$44.93- Mounting Flange
- Commonly used on In-Sink-Erator models such as SS100, SS100-28, SS100-30, SS1000, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS300, SS50-26, SS50-28, SS500, SS75-27, SS75-29, SS750
- Use for Series: KR
-
FLANGE, SINK MOUNTING ASSY #5
Part No. PD11031
$395.57- #5 Sink Adapter
- 3-1/2" to 4" Sink opening adapter
- 9-1/4" Diameter Base Plate
- Commonly used on various In-Sink-Erator models where part is applicable.
-
FLANGE, TAILPIPE, OUTLET
Part No. PD30089
$17.18- Flange inner opening 2 1/4 inch x 1 1/2 inch
- Flange outer 3 15/16 inch x 2 3/16 inch
- Other end 2 1/4 Threaded
- Used on various Insinkerator models such as SS150, SS200 and where part is applicable.
-
-
GASKET, OUTLET
Part No. PD30088
$2.62- Tail Pipe Outlet Gasket
- 4 x 2-1/4 x 1/8"
- 3-3/8 x 1-1/2" mount center holes
- Black rubber
- Used on various Insinkerator models such as SS150, SS200, and where part is applicable.
-
-
GASKET, SHREDDER
Part No. PD29536
$10.66- Used on various Insinkerator models such as SS125-26, SS100, SS100-28, SS100-30, SS101, SS102, SS125-25, SS125-27, SS50-26, SS50-28, SS75-27, SS75-29, and where part is applicable.
-
GASKET, TAIL PIPE
Part No. PD27643
$1.99- Gasket, tail pipe
- 1-7/8" OD x 1-3/8" ID
- Rubber
- Commonly used on In-sink-erator models: LC-50-11, LC-50-12, LC-50-13, LC-50-14, SS100, SS100-28, SS100-30, SS101, SS102, SS125-25, SS125-27, SS50-26, SS50-28, SS75-27, SS75-29
-
HOUSEHOLD GARBAGE DISPOSAL
Part No. PD48203
$405.90- Garbage Disposal
- 3/4HP
- 34.6 oz Grind Chamber
- Quick Lock Installation
- Home Model
- Commonly used where part is applicable.
-
KEY WOODRUFF
Part No. PD61046
$0.68- KEY WOODRUFF for INSINKERATOR DISPOSER for models such as:
SS100, SS100-28, SS100-30, SS1000, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS300, SS50-26, SS50-28, SS500, SS75-27, SS75-29, SS750 AND where part is applicable
- KEY WOODRUFF for INSINKERATOR DISPOSER for models such as:
-
-
Manual Switch, Disposer
Part No. PD39115
$242.55- Manual Disposer Switch
- On-Off
- 208V single or 3 phase
- Commonly used on Insinkerator models such as: SS200 and where part is applicable.
-
MOUNTING GASKET
Part No. PD10954.5
$61.25- Mounting gasket
- Round with mounting holes
- 8-3/4" OD
- 6-3/4" ID
- Use on various In-Sink-Erator models such as: SS100, SS100-28, SS100-30, SS1000, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS300, SS50-26, SS50-28, SS500, SS75-27, SS75-29, SS750and where part is applicable
-
-
-
OVERLOAD PROTECTOR
Part No. PD47484
$58.13- Overload Protector
- 3 wire lead
- Reset button
- Used on Insinkerator models such as SS75-27, SS75-29 and where part is applicable.
-
PLUG, PIPE
Part No. PD33755.5
$1.93- Commonly used on Insinkerator models such as SS 500 28, SS100, SS100-28, SS100-30, SS1000, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS300, SS50-26, SS50-28, SS500, SS75-27, SS75-29, SS750 and where part is applicable.
-
RING, RETAINING
Part No. PD50536
$426.36- Used on various Insinkerator models such as SS100, SS100-28, SS100-30, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS50-26, SS50-28, SS75-27, SS75-29, and where part is applicable.
-
ROTOR, SHREDDER ASSEMBLY
Part No. PD29535
$168.22- Shredder, Rotor
- 6-7/8 diameter
- 3/4" hole
- 2 keyways
- Commonly used on In-Sink-Erator models: SS150, SS200
-
-
-
Screw
Part No. PD54956
$2.84- Outlet Screw
- 5/16"-18 X 5/8"
- 3/8"
- Dia head
- Slot head
- For all In-sink-erator models
-
SCREW, Tapping
Part No. PD10303
$0.64- Screw, tapping
- Used on various In-Sink-Erator models such as SS100, SS100-28, SS100-30, SS1000, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS300, SS50-26, SS50-28, SS500, SS75-27, SS75-29, SS750 and where part is applicable.
-
-
SEAL ASSEMBLY
Part No. PD21850
$26.74- Seal assembly
- 6 perimeter mounting holes
- Used in various In-Sink-Erator models such as SS100, SS100-28, SS100-30, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS50-26, SS50-28, SS75-27, SS75-29 and where part is applicable.
-
SEAL, oil & water
Part No. PD11024
$7.23- Oil & water seal
- Used on various In-Sink-Erator models such as SS100, SS100-28, SS100-30, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS50-26, SS50-28, SS75-27, SS75-29 and where part is applicable.
-
SHIELD
Part No. PD11047
$3.39- Shield
- Metal
- Used on various In-Sink-Erator models such as SS100, SS100-28, SS100-30, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS50-26, SS50-28, SS75-27, SS75-29 and where applciable.
-
-
SHREDDER, STATIONARY
Part No. PD41861
$196.42- Shredder, stationary
- Used on various In-Sink-Erator models such as SS150, SS200 and where part is applicable.
-
-
SLINGER
Part No. PD11023
$2.08- Slinger
- Metal
- Used on various In-Sink-Erator models such as SS100, SS100-28, SS100-30, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS50-26, SS50-28, SS75-27, SS75-29 and where part is applicable.
-
-
SOLENOID VALVE, FILL
Part No. PD48467
$212.30- Water Solenoid Valve
- 208/240V
- 4W
- Used on various Insinkerator models where part is applicable.
-
SPACER, Sleeve
Part No. PD11046
$12.79- Sleeve spacer
- Used in various In-Sink-Erator models such as SS100, SS100-28, SS100-30, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS50-26, SS50-28, SS75-27, SS75-29 and where part is applicable.
-
SPLASH SAFETY BAFFLE
Part No. PD10952.5
$118.99- Throat Baffle
- Splash guard
- 7-1/2" OD
- Lower fitting 6-5/8"
- Black or gray rubber
- For all models with a 6-1/2" to 7-1/2" opening.
- Commonly used on In-Sink-Erator models: SS-50, SS-75, SS-125, SS-150, SS 150-36, SS-200, SS 200-29 and where part is applicable (most models).
-
SPRING, PRE LOAD
Part No. PD11086
$1.92- Used on various Insinkerator models such as SS100, SS100-28, SS100-30, SS1000, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS300, SS50-26, SS50-28, SS500, SS75-27, SS75-29, SS750, and where part is applicable.
-
-
-
START SWITCH PUSH
Part No. PD36444.5
$75.78- Use on various Insinkerator control box models such as: SS300, and where part is applicable.
-
Stop Switch
Part No. PD51320
$41.96- Stop Switch
- Push button
- Commonly Used on Insinkerator Models: CC202D-3, WX-101A and where part is applicable.
-
-
-
TAIL PIPE GASKET, OUTLET 3 X 5"
Part No. PD10977
$4.35- Outlet gasket
- 3 x 5"
- Commonly used on In-sink-erator models: SS1000, SS300, SS500, SS750
-
TERMINAL BOX ASSEMBLY
Part No. PD38840
$34.67- Terminal Box
- Commonly used on Insink-er-ator models: SS100, SS100-28, SS100-30, SS1000, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS300, SS50-26, SS50-28, SS500, SS75-27, SS75-29, SS750 where part is applicable.
-
-
UPPER END BELL
Part No. PD52608
$569.84- Upper End Bell
- Use on various In-sink-erator models such as SS1000, SS300, SS500, SS750 and where part is applicable.
-
-
VALVE, SOLENOID, WATER
Part No. PD59403
$244.90- Water Solenoid Valve
- 6.3 watts
- air PSI 5-230
- brass valve
- with harness
- Asco
-
WASHER
Part No. PD11028
$0.56- Washer
- Used on various Robot Coupe models such as SS100, SS100-28, SS100-30, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS50-26, SS50-28, SS75-27, SS75-29 and where part is applicable.
-
WASHER, FIBER
Part No. PD11017
$1.93- Fiber Washer
- Used on various Insinkerator models such as SS100, SS100-28, SS100-30, SS101, SS102, SS125-25, SS125-27, SS150, SS200, SS50-26, SS50-28, SS75-27, SS75-29 and where part is applicable.