Howard-Mccray
-
-
-
Door Gasket, 23-1/4 x 28-3/16"
Part No. PD168755
$46.00- Door Gasket
- 4 sided
- Grey
- 23-1/4" x 28-3/16"
- Magnet 3/8"
- Height 11/16"
- Width 11/16"
-
Door Gasket, Magnetic
Part No. PD168762
$88.13- Door Gasket
- Grey
- 25-5/16" x 58-11/16"
- Dimensions are OD from base of gasket and not magnet
- 4 sided
- Commonly used on Howard refrigeration units and where part is applicable
-
Door Glide
Part No. PD39941
$33.86- Door Glide
- Takes two (2) per door
- Commonly used on Howard - McCray models such as: R-CD534E-12 and where part is applicable.
-
Evaporator Motor, does not include fans
Part No. PD56503
$105.12- Commercial Replacement Evaporator Motor Kit
- 7/8" stack dual voltage motor
- 3/16" Shaft diameter
- 110V/220V
- 3000 RPM
- .91/.45 amps
- 1/55HP
- Automatic thermal overload
- Wire leads
- Rotation-clockwise from shaft end
- 6000XL Platform
- Note-This is a replacement motor
- Used on various Howard models and only where part is applicable
-
Gasket, Door
Part No. PD53593
$121.28- Door Gasket
- Used on various Howard McCray models such as SF-22, SR-22
-
Glass, Door, Sliding 22.25 X 29.75
Part No. PD39940
$173.53- Glass, Door, Sliding
- Commonly used on Howard - McCray models such as: R-CD534E-12 and where part is applicable.
-
Hinge, Reversible
Part No. PD51593
$37.13- Cam lift reversible hinge
- Offset 1-1/4"
- 5-3/4 L x 1-1/6 wide x 1-3/4 front to back
- Center holes 1-1/16"
- Chrome
- Commonly Used on various Howard McCray Models such as SR48SS1
-
INNER DOOR, GLASS
Part No. PD41396
$508.20- Sliding inner glass door with wiper
- Commonly used on models: CFS35
-
MOTOR, EVAPORATOR
Part No. PD27853
$199.98- Evaporator motor
- 3/16" shaft
- CW rotation
- 115V
- Includes fan and bracket
- Commonly Used on Howard-McCray Models: GR44BM, RD32E8
-
On/Off Toggle
Part No. PDG10710
$24.10- On/Off Toggle Switch
- Fits 1/2" hole
- SPST
- 2 terminals
- 1/4" tabs
- 20A/125V, 10A/277V
- Use where part is applicable
-
Pilaster Clip, Zinc
Part No. PDG10711
$3.60- Pilaster Shelf Clip
- Zinc
- Holds up internal cabinet shelves in Howard McCray models where part is applicable.
-
RACK. 21-1/4 X 31-5/8"
Part No. PD42649
$82.20- Shelf
- Measurement 21-1/4 x 31-5/8"
- Commonly used on McCray model: SC-CDS-35-8
-
Shelf Bracket, Mezzanine
Part No. PD51830
$67.33- 12" Bracket
- Stainless Steel
- Commonly Used on McCray or Howard-MrCray Models: SC-CDS34E10
-
SHELF, EPOXY (WHITE,25D X 23.5W)
Part No. PD233224
$99.61- White Epoxy-Coated Shelf
- 25" D x 23-1/2" W
- 1/8" Crosswires
- 5/16" Frame and Support Bar
- 3 mm Crosswires
- 8 mm Frame and Support Bar
- Commonly used on Howard-McCray models such as: HCAD-45, HC45QS and where part is applicable.
-
SHELF, EPOXY (WHT,25D X 21.5W)
Part No. PD233776
$158.40- WIRE SHELF
- 21-5/8" WIDE
- 25-1/8" LONG
- EPOXY COATED
- WHITE
- OUTER DIAMETER
- 1/8" CROSSWIRES
- 5/16" FRAME AND SUPPORT BAR
- 3 mm CROSSWIRES
- 8 mm FRAME AND SUPPORT BAR
- Commonly used on Howard models
- Zinc-plated, plastic-coated, and epoxy shelves not suitable for ovens. Nickel, chrome, and stainless steel shelving recommended for ovens. Epoxy, plastic-coated, and stainless steel shelving recommended for coolers or freezers where condensation exists
-
Spring Cartridge Only
Part No. PD168721
$83.10- Spring Cartridge Only
- Used on various Howard McCray doors where part is applicable.