Oven & Ranges
-
-
BLOWER WHEEL
Part No. PD37540
$166.50- Blower wheel
- 9-7/8" Diameter
- 2-3/16" Width
- 5/8" Bore hole
- Flat Back
- Clockwise rotation
- Puller hub
- Used for various General Electric models such as CN series ond only where part is applicable.
-
Blower Wheel
Part No. PDG11416
$308.56- Blower Wheel
- 9 7/8" diameter x 2 3/16" width
- 5/8" hole
- 2" Deep
- Clockwise rotation
- Puller hub
- Flat
- Commonly used on various Vulcan Hart models and only where part is applicable.
-
Blower Wheel - Convection Oven
Part No. PDG11336
$166.50- Blower wheel
- 9-7/8" Diameter
- 2-3/16" Width
- 5/8" Bore hole
- Flat Back
- Clockwise rotation
- Puller hub
- Used for various GE models such as CN series and only where part is applicable.
-
BLOWER WHEEL, 5/8" BORE
Part No. PD26382
$140.40- Hobart style blower wheel
- 8-1/2& x 2-1/8
- 5/8 Bore
- CCW Rotation
- Used on various Hobart and GE ovens where part is applicable
-
BLOWER WHEEL, 9-7/8"
Part No. PD46216
$139.34- Blower Wheel
- 9-7/8" diameter
- Shaft bore 5/8", 2" wide
- Flat back changed to concave back
- CCW rotation
- Smooth hub
- 2 set screws added key way and key
- Used on Hobart ovens such as CN and most other convection ovens.
-
-
Burner Valve
Part No. PD45918
$113.06- Burner Valve
- 1/4" MPT Inlet
- 1/2"-27 Out
- Rotation OFF/ON
- 2-1/8" Center Of Inlet To End Of Stem 2-1/8"
- 1/2PSI
- Stem Position Right
- Commonly used on various Hobart models and only where part is applicable.
-
-
CIRCUIT BREAKER, 50A
Part No. PD43664
$137.39- Circuit Breaker
- 50Amp
- Single pole
- 208V/240V
- Commonly used on various Vulcan Hart/Hobart models such as E24L, E36L, E48L, E60L, HE12, HE36, VO004, VO008, VR1, VR2, VR3, VR4, VR5, VR6, VR7, ER50C, ER50D, ER85C, ER85D, ERC225, ERC225-ML-114620, ERC225F, ERC225F-ML-126911, ERC40, ERC40-ML-114618, ERC40F, ERC40F-ML-126909, ERC50, ERC50-ML-114619, ERC50-ML-135545, ERC50F, ERC50F-ML-126910, ERC85, ERC85-ML-114621, ERC85-ML-135547, ERC85F, ERC85F-ML-126912, ERD225, ERD225-ML-114616, ERD225F, ERD225F-ML-126907, ERD40, ERD40-ML-114614, ERD40F, ERD40F-ML-126905, ERD50, ERD50-ML-114615, ERD50-ML-135541, ERD50F, ERD50F-ML-126906, ERD85, ERD85-ML-114617, ERD85-ML-135543, ERD85F, ERD85F-ML-126908, ESB36, ESB36-ML-52462, ESB48, ESB48-ML-52468, ESB60, ESB60-ML-52463, ET1010, ET101R, ET88, ET88R, ETH101, ETH11R, ETH88, ETH88R, VB21, VB2S, VB73, VB73-ML-52249, VB73R, VB73R-ML-52248, VR1C, VR1C-ML-52955, VR2C, VR2C-ML-52956, VR3C, VR3C-ML-52957, VR4C, VR4C-ML-52958, VR5C, VR5C-ML-52959, VR6C, VR6C-ML-52960, VR7C, VR7C-ML-52111, VTMB2, VTMB22 and only where part is applicable.
-
Compression Door Spring
Part No. PDG11482
$90.51- Compression Door Spring
- Use for Vulcan models such as (Series): ET, RGT, SG; HEC and only where part is applicable.
-
CONTROLLER, TEMPERATURE W/HARNESS
Part No. PDG10695
$313.18- Temperature Controller
- w/harness
- 500 deg F
- 2-5/8" x 3-1/2"
- 120/240V AC
- Commonly used on various Hobart models such as SG4(C, D), SG6(C, D), HEC5, ECO2D, ECO4D, ECO6D, GCO2D, HEC5, HEC20, HGC20, HGC40, SG4, SG44, SG4C, SG4D, SG6, SG66, SG6C, SG6D, VC3ED, VC44GD, VC4EC, VC4ED, VC4ES, VC4GD, VC4GS, VC6EC, VC6ED, VC6ES, VC6GD, VC6GS, WKG, WKGC, WKGD, WKGDX, WKGX, WLGO and where part is applicable
-
COOLING FAN, 230V
Part No. PD41106
$121.68- Cooling Fan (Axial)
- 230V
- 12" wire leads
- 4-1/8" square mounting centers
- 1-1/2" Wide
- 106 CFM
- Clockwise
- Commonly used on Vulcan models such as SG4, SG4C, SG4C-ML-114876, SG4D, SG4D-ML-114875, SG6, SG6C, SG6C-ML-114878, SG6D, SG6D-ML-114877, VC44GD, VC4EC, VC4EC-ML-126745, VC4ED, VC4ED-ML-126744, VC4ES, VC4ES-ML-126743, VC4GC, VC4GC-ML-136494, VC4GD, VC4GD-ML-126611, VC4GS, VC4GS-ML-126610, VC6EC, VC6EC-ML-126748, VC6ED, VC6ED-ML-126747, VC6ES, VC6ES-ML-126746, VC6GC, VC6GC-ML-136495, VC6GD, VC6GD-ML-126613, VC6GS, VC6GS-ML-126612 and only where part is applicable.
-
DOOR CHAIN AND TURNBUCKLE
Part No. PD23636
$120.11- Door Chain Assembly
- Commonly used on various Vulcan models such as: SG4C, SG4D, SG6C, SG6D, VC4EC, VC4ED, VC4ES, VC4GC, VC4GD, VC4GS, VC6EC, VC6ED, VC6ES, VC6GC, VC6GD, VC6GS, and where part is applicable.
-
DOOR CHAIN AND TURNBUCKLE
Part No. PD465121
$119.80- Door Chain Assembly
- Commonly used on various Vulcan models such as: DEC5, HEC5, HEC5D, HEC5DX, HEC5X and where part is applicable.
-
ELECTRODE, IGNITION SPARK
Part No. PD900470
$117.43- Electrode, Spark Pilot
- 2 probes
- 1/4" push-on spade terminal
- Used on Hobart model DGC502 and where applicable.
-
Element, 208V, 2700W
Part No. PD23746
$80.34- Grill-Range element
- 240V
- 2700W
- 22-3/4" x 4-1/2"
- Flag terminals, unthreaded hole
- Hobart
- GRILL: CG30, CG41, CG56, CG58, CG59, CG68, CG801, CG821,
CG831 (WENDY'S), CG851 - RANGE: CR42C THRU CR48C, CR58C,CR59C, CR421, CR441
- GRILL: CG30, CG41, CG56, CG58, CG59, CG68, CG801, CG821,
-
ELEMENT, OVEN - 208V 10.5KW
Part No. PD23610
$829.99- Oven element
- 208Volt
- 1-3phase
- 10500 Watt
- 26-1/4" x 16-1/2" x 9"H
- Commonly used on Vulcan models: ECO4C, ECO4D, ECO4S, ECO6C, ECO6D,CN90A, CN90B, CN90C, CN91, CN91B, CN92C, CN95 and where part is applicable.
-
Equipment Leg, 4"
Part No. PD43678
$31.32- Stem leg, threaded
- Heavy Duty Stainless Steel
- Stud size 5/16 - 18"
- 4" height
- Adjustable 1-/2"
- Hex foot
- Satin metal finish
-
-
-
-
FRENCH PLATE (BURNER ASSY)
Part No. PD24199
$459.99- French Hot Plate
- 480 V
- 2000 W
- Solid top surface
- 9-1/4" diameter
- fits 8-3" hole
- 4 pin terminals w/screw
- Bottom has center mounting stud 1/4-20 threads and offset pin
- Used on various Vulcan models such as E24L, E36L, E48L, E60L, EV12, EV12-ML-137304, EV24S, EV24S-ML-137290, EV36S, EV36S-ML-137303, EV48s, EV60SS-ML-137295, EV60s, EV72s, VR1C, VR1C-ML-52955, VR2C, VR2C-ML-52956, VR3C, VR3C-ML-52957, VR4C, VR4C-ML-52958, VR5C, VR5C-ML-52959, VR6C, VR6C-ML-52960, VR7C, VR7C-ML-52111 and only where part is applicable.
-
-
-
-
HEAT SWITCH KIT, 3 Position
Part No. PD28683.1
$694.47- Rotary switch kit
- Clockwise
- Fits Hole 3/8"
- 20A
- 480V
- Kit includes
- (5)1/4" Tab Terminals
- 5 Wires
- 5 Yellow wire nuts
- 5 Right angle push-ons
- Stem has double flats
- Commonly used on Vulcan models such as ESB36, ESB36-ML-52462, ESB48, ESB48-ML-52468, ESB60, ESB60-ML-52463, VB73, VB73-ML-52249, VB73R, VB73R-ML-52248 and only where part is applicable.
-
Heating Element 240V 10500W
Part No. PDG10606
$1,152.66- Heating Element 240V 10500W (3 Elements In Set)
- A = 26"
- B = 16-1/3"
- C = 9"
- Use for Ovens: CN90A, 90B, 90C, 91, 91B, 92C & 95
- Contains 3 elements each rated @ 3500W. It may only be purchased assembled as one unit.
-
Heating Element Inner 208V 3400W
Part No. PD31177
$149.85- Heating Element Inner 208V 3400W
- A = 1-3/4"
- B = 5-1/8"
- C = 25-1/2"
- Use for Ovens: CN401, CR431
-
Heating Element, 240V, 10500W
Part No. PD119662
$1,152.66- Oven Element
- 240V
- 10500W
- 1-3PH
- 26-1/4" X 16-1/2" X 9"
- Flag terminals
- Commonly used on various Hobart models such as CN90A, CN90B, CN90C, CN91, CN91B, CN92C, CN95. and only where part is applicable.
-
HIGH LIMIT AUTO CYCLE, 590? F
Part No. PD44185
$314.80- High Limit
- Auto cycle
- 590° F
- Used on various Hobart models such as HSR, HSROG and where part is applicable.
-
Ignition Module, 24V
Part No. PD43625
$275.68- Ignition Module
- 24V
- 90 Second Lockout
- Spark connection on top.
- Old style gray box no longer available.
- Always recommended to replace spark wire when replacing box.
-
INDICATOR LIGHT P
Part No. PD36703.1
$37.85- Indicator light
- 3/8" x 1-5/15"
- Red
- 28V
- 8" Wire leads
- Commonly used on Vulcan fryer-range-oven models: 148L, 148LC, 160L, 160LC, 1GPC12, 1GRD35, 1GRD45, 1GRD65, 1GRS35, 1GRS45, 1GRS65, 24L, 260L, 260LC, 260LCC, 36L, 36LC, 481L, 481LC, 48L, 60L, 60LC, 60LCC, GPC12, GPC12S, GPC16, GPC16S, GR35F, GR45F, GR65F, GR85F, GRC35F, GRC45F, GRC65F, GRC85F, GRD35F, GRD45F, GRD65F, GRD85F, GRS35F, GRS45F, GRS65F, GRS85F, MG12, VF1, VF1D, VF2, VF2D, VF90, VFD90, VMF1, VMF1D, VMF2, VMF2D and where part is applicable.
-
INFINTE CONTROL SWITCH 120V
Part No. PD23681
$259.03- 120 Volt
- Palnut mount
- Use on various Hobart models such as: GN90S, and where part is applicable
-
-
KNOB, BLACK, BURNER, 2-1/2"
Part No. PD43661
$19.06- Burner Knob
- Black Plastic
- 2-1/2" Diameter
- Off-On
- .240" Mount
- Commonly used on various Vulcan Hart models and where part is applicable.
-
KNOB, OVEN (see alternates below)
Part No. PD226295
$0.00- This item is obsolete, however our customers have been able to use one of these universal dial kits.
- PD137140 or PD18200 (enter one in the search box)
-
KNOB-DIAL 2.75 DIAMETER
Part No. PD45851
$18.81- Knob-Dial
- 2-3/4" diameter
- Black
- Plastic
- Use for Hobart oven models where part is applicable.
-
KX Thermostat -140-425F
Part No. PDG10635
$199.20- KX Thermostat
- 140-425°F
- Bulb 3/16 x 11-5/8"
- Capillary 24"
- OFF-450-100
- Use for Hobart-GE Ovens: C85 (Half Size); CN85, CN90B, CN91C, CN92 & CN401
-
KX Thermostat 175-500F
Part No. PD23679
$341.49- KX Thermostat -175-500°F
- Bulb 3/16 X 11-5/8
- Used on various Hobart/GE models such as: CN90 - Gas & Elec and where part is applicable.
- Hotpoint P/N
-
KX Thermostat, 140-425 F
Part No. PDG10628
$175.64- Thermostat, KA Style
- Temp Range 140-425 F degrees
- Cap Length 12"
- Bulb 3/16" x 11-5/8" Blackened
-
KX Thermostat, 140-425 F
Part No. PDG10683
$238.86- KX Type Thermostat
- Temperature Range 140-425 F degrees
- Capillary Length 12"
- Bulb 3/16" x 11-5/8", Blackened
- Mount horizontal
- Commonly used on Hobart-GE ovens such as CN90C, CN92D, CN95 and where aprt is applicable.
-
LAMP, 120V 40W Clear
Part No. PD42319
$28.00- Light bulb, Lamp
- 120V
- 40 Watt
- Traditional lamp
- Long life
- 400 lumens
- Designed to withstand extreme temperatures
- Used on various Hobart models such as HSROG and where applicable.
-
MERCURY RELAY
Part No. PD23789
$380.73- Mercury Relay
- Contains mercury
- Commonly used on Hobart models: CN-90 and where part is applicable.
-
Micro Leaf Switch - Common N/O
Part No. PD23608
$154.15- Micro lever switch
- (3) 1/4" terminals
- 20 Amp
- 125/250V
- Commonly used on various Vulcan Hart models such as CN90A, CN90, 90B, 91C, 92, 401, ECO4C, ECO4D, ECO4S, ECO6C, ECO6D, GCO4C, GCO4D, GCO4S and only where part is applicable.
-
MODULE, IGNTIION, UNIVERSAL CONTROL
Part No. PD43627
$275.68-
Ignition Module
-
Intermittent Pilot Gas Ignition Control Module is designed to provide easy field replacement of a wide range of intermittent pilot ignition modules manufactured by Honeywell, Robertshaw, Johnson Controls, and others.
-
The control provides ignition sequence, flame monitoring, and safety shutoff for intermittent pilot central furnaces, residential boilers, and other heating appliances. The unit replaces existing flame rectification type, intermittent pilot ignition modules with the following characteristics:
-
Single rod (local sense) or two rod (remote sense)
-
flame sensing
-
Non-100 percent shutoff, 100 percent shutoff/lockout, or 100 percent shutoff/continuous retry
-
Natural or LP gas
-
Shutoff/lockout times of 15 seconds or longer
-
Pre purge configurable to 30 seconds or no pre purge
-
Pilot burners with flow rates of 1,500 Btuh or less
-
With or without integral damper connector
-
The control is not designed to replace controls with:
- Flame sensing other than by flame rectification (White Rodgers Cycle-Pilot, or Robertshaw thermal sensing)
-
Standing pilot appliances
-
Direct main burner ignition
The control provides:
-
Natural or LP gas
-
Pilot burner ignition using an internally generated high voltage spark
-
Flame rectification circuit to monitor flame presence
-
Monitoring of 24 Vac, pilot, and main gas valve
-
Two LED indicators for flame presence/strength and system status/errors
-
EnviraCOM communication protocol for system diagnostics
-
Vent Damper connection
Image is not exact. This is a possible universal replacement for the OEM part. Call us if you need more information before buying.
-
-
Momentary Micro Leaf Switch Door
Part No. PDG10690
$61.55- Momentary Micro Leaf Switch Door
- Lever switch
- Lever 2-3/8"
- 15A
- 250V/125V
- 3/4HP
- SPST
- 1/4" tab terminal
- 3 terminals
- Use for Hobart Ovens: CN85
-
Motor -1/3" HP, 230V, 1 Phase, 1 Speed
Part No. PDG10622
$670.46- Motor -1/3 HP
- 230 Volts
- 1 Phase
- 1 Speed
- Use for CN & Most Other Conveyor Ovens
-
-
On/Off Toggle
Part No. PD26962
$20.25- On/Off Toggle
- Terminals 4 (1/4" tabs)
- Commonly used on Hobart models such as: CN50, CN60, CN70, CN90B, 90C, 95, 522 & 523
-
On/Off Toggle
Part No. PDG10623
$20.25- Position On/Off
- 10A-250V/15A-125V
- Terminals: 4
- Terminal Size 1/4"
- Fits 1/2" hole
- Palnut Mount
- Used on various HOBART GE Ovens: CN50, 60, 70, 90B, 90C, 95, 522 & 523
-
-
Orifice, Burner #52 LP
Part No. PD53422
$18.43- Burner Orifice
- Brass
- 3/8-27 x 1/2"
- #52 - LP Gas Commonly used on Various Hobart models and where part is applicable.
-
Oven Door Glass -7-3/8" x 17" x 1-11/16"
Part No. PDG10700
$305.39- Oven Door Glass
- 7-3/8" x 17" x 1-11/16"
- Used on various Hobart models such as CN90 and only where part is applicable.
-
PILOT ASSEMBLY, NATURAL OR LP GAS
Part No. PD13228
$63.13- Pilot Burner
- Natural or LP gas
- Tube size 3/16" CCT
- .014 " Natural or LP universal orifice
- Flame pattern is straight
-
Probe, Temperature, SS
Part No. PD32106.1
$95.77- Temperature Probe
- Red and White Leads
- 1/4"D x 4"L
- Stainless Steel
- 36" wires
- 1/4" Push-on Terminals
- Commonly used on Vulcan and Wolf models such as CN85, ECO2C, ECO2C-ML-114572, ECO2D, ECO2D-ML-114570, ECO4D, ECO6D, GCO2C, GCO2C-ML-114571, GCO2D, GCO2D-ML-114569, GCO4C, GCO4D, GCO4S, SG4, SG4C, SG4C-ML-114876, SG4D, SG4D-ML-114875, SG6, SG6C, SG6C-ML-114878, SG6D, SG6D-ML-114877, VC44GD, VC4EC, VC4EC-ML-126745, VC4ED, VC4ED-ML-126744, VC4ES, VC4ES-ML-126743, VC4GC, VC4GC-ML-136494, VC4GD, VC4GD-ML-126611, VC4GS, VC4GS-ML-126610, VC5GD-11D1, VC5GD-21D1, VC6EC, VC6EC-ML-126748, VC6ED, VC6ED-ML-126747, VC6ES, VC6ES-ML-126746, VC6GC, VC6GC-ML-136495, VC6GD, VC6GD-ML-126613, VC6GS, VC6GS-ML-126612 and only where part is applicable.
-
-
-
-
SENSOR, HIGH TEMP
Part No. PD42715
$447.00- Sensor
- High temp
- Used on various Hobart models such as HSR, HSROG and where part is applicable.
-
Signal Light Red Round 1/2" Tab Term
Part No. PDG10619
$15.75- Signal Light
- Red Round
- 1/2" Tab Terminal
- 250V
- Used on various Hobart GE Griddles, fryers and ovens where part is applicable
-
Signal Light, Red
Part No. PD38463
$18.81- Indicator Light
- 1-1/4" x 5/16"
- 1/4" terminal size
- 125V
- 1/3 W
- Flat with Chrome Bezel
- Commonly used on various Vulcan models and where part is applicable.
-
SOLENOID VALVE, 120V
Part No. PD23683
$143.28- Gas Solenoid Valve
- 120V
- 3/8" NPT in - out
- 121,000 BTU
- Ambient Temperature -40 to 275 Degrees F
- 1/8" pilot out
- Normally Closed Solenoid
- Inlet Filtered Screen
- This is the new style with black molded coil.
- Commonly used in various ovens where applicable.
-
-
-
Switch, Heat
Part No. PDG11219
$76.24- Position On/Off
- 10A-250V/15A-125V
- Terminals: 4
- Terminal Size 1/4"
- Fits 1/2" hole
- Palnut Mount
- Used on various Vulcan models such as 522, 523 where part is applicable
-
THERMOSTAT, 100-450 F, 36" CAP
Part No. PD27318
$181.24- Thermostat
- S type
- 100-450 degrees F
- Bulb 3/16 x 8-3/8"
- Capillary 36"
- Used on Hobart models CX164, CR42, CR42C, CR46C (NEW STYLE), CR48, CR48C, CR54C,
CR58, CR58C, CR59, CR59C, CR421, CR441 where part is applicable.
-
THERMOSTAT, 208V 250-950 F
Part No. PD20387
$169.40- KNP Thermostat
- 250-450°F
- Used on various Hobart/GE models such as CR40, 40B, 41, 41B, 44, 44B, 46, 46B, 47, 47B, 50, 50B, 52, 53, 56 & 401 where part is applicable.
-
Thermostat, D1/D18, 200-550F
Part No. PD23730
$229.95- D1/D18 Thermostat -200-550°F
- Dial not included
- 3/16 x 14-1/8 bulb
- DPST for AC operation
- 4 terminal used in applications requiring high current
- Use for Ovens: HN205, HR202; Pizza Ovens: CN50 & 60
-
Thermostat, D1/D18, 200-550F
Part No. PDG10632
$229.95- D1/D18 Thermostat -200-550?F
- Use for Ovens: HN205, HR202; Pizza Ovens: CN50 & 60
-
THERMOSTAT, FDO - BODY 1
Part No. PD45929
$1,057.14- FDO Thermostat
- Gas In: 1/2" NPT
- Inlet & Outlet F
- Gas Out: 1/2" NPT
- Inlet & Outlet E
- Temp Range 150-550°F
- Cap Length 48"
- Bulb 3/16" x 14-3/4"
- Gas Capacity- Nat- 161,000 BTU, LP- 344,500 BTU
- Control Function -
- Valve Action - Snap Throttle.
- Burner Function - Full to Off.
- Typical Application- Oven ( 150 to 550° F )
-
THERMOSTAT, KNP 250-950 F
Part No. PD129040
$169.40- Thermostat
- KNP
- 250-450°F
- Used on various Hobart/GE/Vulcan models such as CR40, 40B, 41, 41B, 44, 44B, 46, 46B, 47, 47B, 50, 50B, 52, 53, 56 & 401 where part is applicable.
-
Thermostat, KX 175-500 F, Dip Sealed
Part No. PD43440
$226.32- KX Thermostat
- Dip Sealed
- Temperature Range 175-500°F
- Cap Length 72""
- Bulb 3/16" x 11-5/8"
- Rating 50VA pilot-Duty @ 120/277 VAC
- Use for GE Hobart oven gas and electric CN90
- 115Z, 2-115, 2-115A, 2-115B, 2-115C, 2-115Z, 2-70A, 2-70B, 2-70C, 2-70Z, 70, 70A, 70Z, R2-85, R2-85A, R85, R85A, SE115, SE2-115, SE2-70, SE70, SL115-AH, SL115-AP, SL115AH, SL115AP, SL2-115AH, SL2-115AP, SL2-70AH, SL2-70AP, SL70AH, SL70AP
-
-
-
Timer - 120V, 60 Min
Part No. PD24112
$99.99- Timer
- 60 Min
- 120V
- Used on various Hobart models such as DGC5, HGC5, HGC5D, HGC5X, HGC5DX, HGC40, HGC40D, HGC60, HGC60D and only where part is applicable.
-
TIMER - 60 MIN 230V
Part No. PD128964
$119.28- Timer
- 208/240V
- 60 Hz
- 1 hour
- Commonly used on various Hobart models such as DEC501, DEC502, DEC504, DGC1, DGC502, DGC5X, HEC20, HEC40, HEC40D, HEC5, HEC501, HEC502, HEC504, HEC5D, HEC5DX, HEC5X, HEC60, HEC60D, HECV5X, HGC20, HGC40, HGC40D, HGC5, HGC501, HGC501D, HGC501DX, HGC501X, HGC502, HGC502D, HGC502DX, HGC502X, HGC5D, HGC60, HGC60D, HSF3, HSF4, HSF5, HSF90 and only where part is applicable.
-
TS Safety Body and Magnet Head #11
Part No. PD43533
$153.41- TS Safety Valve
- Body 11 (Magnet Head & Gas Carrier)
- 3-1/2" wide
- with 2 ferrules, 1/4" opening
- Gas In/Out: 7/16" CCT tubing
- J type pilot Pilot In/Out: 1/4" CCT tubing
- Use on Hobart models where part is applicable.
-
VALVE SOLENOID 1 STEAM
Part No. PD56334
$595.02- VALVE, SOLENOID
- 1" STEAM
- Commonly used on Hobart models such as FT1000, FT1000-ER, FT1000-ER-BD, FT1000S, FT1000S-ER, FT1000S-ER-BD, FT900, FT900BD, FT900D, FT900DBD, FT900S, FT900SBD, FT900SD, FT900SDBD, FT900W and only where part is applicable.
-
VALVE, SHUT OFF (3/8 NPT M)
Part No. PD900666
$87.52- Gas Valve
- Brass
- 3/8" MPT x 3/8" MPT
- Rotation Off-On
- Stem Up-Down
- Stem size .240"
- Center inlet to end of stem 3-3/4"
- Stem 2-5/16" long
- Width 2-1/4"