Warmers & Holding Cabinets
-
#10-32 X 3/8 SL/PH BND HD S
Part No. PD203065
$0.40- #10-32 X 3/8 SL/PH BND HD S
- Commonly used on Henny Penny models and where part is applicable.
-
#8 Tinnerman Fastener
Part No. PD202954
$0.80- #8 Tinnerman Fastener
- Commonly used on Henny Penny models such as: HC-941, Henny Penny, PFE-520 and where part is applicable.
-
-
-
Axial Fan -115V
Part No. PD198756
$59.61- Axial Fan
- 120 Volt
- 3300 RPM
- 34 CFM
- Size 3-1/8" x 1-1/2"
- 2-7/8" centers
- Use for models such as HC-930, HC-932, HC-933, HC-934, HC-934DA, MW-1 and where aplicable.
-
Axial Fan, 230V, 50-60Hz
Part No. PD128784
$75.35- Axial Fan
- 230 V AC
- 50-60Hz
- 10W
- 3000 RPM
- 29 CFM
- 2 13/16" centers
- Clockwise rotation
- Wire leads
- Used on various Henny penny models such as 500, 600, BGW10, C7000, CM-5, CM-7, CMT-5, CMT-7, Computron 7000, Computron7000, EPC-2, EPC-200, EPC-3, EPC-4, HC-932, HC-932-MCDS, HC-934, HC-934-MCDS, HCD-930, HCD-930 CDT, HCD-932, HCD-932 CDT, HCH-930, HCH-930 CDT, HCH-932, HCH-932 CDT, HCH-932-930, HDC-932 CDT, HHC-980, HHC-980 Pizza Hut, HHC-983, HHC-983 Pizza Hut, HHC-990, HHC-992, HHC-993, HHC-996, HHC-997, HHC-998, HM-3, HM-5, HM-7, HMR-103, HMR-104, HMR-105, HMR-106, HMR-107, HMR-123, HMR-125, HMR-127, HMT-3, HMT-5, HMT-7, OE-100, PFE-500, PFE-561, PFE-600, PFG-500, PFG-561, PFG-600 and only where part is applicable.
-
-
-
-
-
Blower Motor -120V
Part No. PD128874
$98.18- Blower Motor -120V
- Use for HC-(932, 934) S/N CW166II & Below
-
BLOWER MOTOR ASSEMBLY
Part No. PD27524
$215.51- Blower Motor assembly
- 120V
- 3000 rpm
- 1.15 amp
- Clockwise rotation
- 1/4" shaft
- Includes blower wheel and cooling fan blade
- Commonly Used on Henny Penny Models such as HC-15, HC-900, HHC-900, HHC-902, HHC-903, HHC-906, HHC-908, HHC-90X and only where part is applicable.
-
-
BOARD, CONTROL
Part No. PD128848
$437.21- Control Board Assembly
- Use for HC-900M, HC-934 (S/N FW042IA & up)
-
-
Bracket, Hi-Limit Clamp
Part No. PD128835
$6.45- Bracket, Hi-Limit Clamp
- Use for CW-114, CW-216; Series: HCW
-
-
-
CENTERBAR - SERVICE *S
Part No. PD198674
$1,211.93- Centerbar Service
- Used on various Henny Penny models such as 500, 600, CFA-500, CFA-600, PFE-500, PFE-500-CFA, PFE-561, PFE-600, PFG-500, PFG-561, PFG-600 and where part is applicable.
-
Chain Retaining Assembly
Part No. PD199391
$5.67- Chain Retaining Assembly
- Commonly used on Henny Penny models such as: AHC-990, AHC-993, CW-114, CW-216, HCS-2, HCW-5, HCW-8 and where applicable.
-
-
Coated Bulb - 40W/130V - coated
Part No. PD202695
$19.01- Coated Bulb, Teflon
- 40W
- 130V
- 3-1/4 length
- 2" diameter
- Medium base style
- Use for Henny Penny model MW-1
-
-
-
-
Control Borard Assembly, 120V
Part No. PD128851
$358.80- Control Board Assembly
- 120 V
- Commonly used on Henny Penny models such as HC-932, HC-932-MCDS and where part is applicable.
-
-
Decal Control Panel
Part No. PD411227
$34.72- Decal Control Panel
- Commonly used on Henny Penny models such as: HC-900, HHC-900, HHC-902, HHC-903, HHC-906, HHC-908 and where part is applicable.
-
-
-
-
-
-
-
-
DOOR GASKET
Part No. PD26990.59
$54.88- Gasket
- Gray
- 29 inch x 21-3/4 inch
- Commonly used on Henny Penny models such as AHC-990, HC-15, HC-900, HHC-900, HHC-902, HHC-980, HHC-980 Pizza Hut, HHC-990 and only where part is applicable.
-
Drip Tray Assembly
Part No. PD198334
$184.55- Drip Tray Assembly
- Commonly used on Henny Penny models such as: HB-121 and where part is applicable.
-
Element Strip Heater -208V 1020W
Part No. PD38053
$263.95- Element Strip Heater
- 208V
- 1020W
- 25-1/2" Long x 3" Wide
- Used on various Henny Penny models such as CW-114, CW-216, HCW-5,HCW-8 and where part is applicable.
-
Element, 120V, 375W
Part No. PD120057
$0.00- Element, 120V, 375W
- A 19"
- B 10-1/4"
- For Warmer: MW-1 (Lower)
-
Element, 208V, 400W Radiant
Part No. PD119738
$97.58- Element, 208V, 400W Radiant
- A 51-1/8"
- For Warmer Series: CW-114, CW-216, HCW
-
-
Element, 230V, 240W
Part No. PD119644
$142.75- Element, 230V, 240W
- A 20-1/2"
- B 1-1/2"
- For Warmer: HC-(941, 942, 943, 944)
-
Element, 240V, 810W
Part No. PD120060
$0.00- Element, 240V, 810W
- A 4-3/4"
- B 3-7/8"
- For Warmer: HC-(930, 932, 933)
-
ELEMENT, HEATING - UPPER
Part No. PD120058
$40.89- Element, 120V, 375W
- A 18-3/8"
- B 1-1/2"
- For Warmer: MW-1 (Upper)
-
FAN, COOLING
Part No. PD128878
$6.24- Fan, Cooling -For PD128873, PD128874 Motor
- Use for HC-(900, 903, 906, 908, 932, 934)
-
GAS SHOCK WRENCH
Part No. PD201657
$177.78- top arm measures, 8-1/8" x 1" x 3/4"
- Handle arm measures 6- 1/8"x 3/4" x 7/8"
- Commonly used on various Henny Penny models such as: CMC-103, CMC-104, CMC-105, CMC-106, CMC-107, CMR-103, CMR-104, CMR-105, CMR-106, CMR-107, HMR-103, HMR-104, HMR-105, HMR-106, HMR-107 and where part is applicable.
-
GASKET
Part No. PD30516
$9.60- Gasket
- Used on various Henny Penny models such as HC-900, HHC-900, HHC-902, HHC-903, HHC-906, HHC-908, and where part is applicable.
-
GASKET GLASS PANE
Part No. PD199446
$77.62- Glass Pane Gasket
- 1/2-3/4" thickness x 2" x 31-13/16"
- Used on various Henny Penny and Rational models such as CM202E, CM202G, CMP202E, CMP202G, SCC202E, SCC202G, SCCWE202E, SCCWE202G and where part is applicable.
-
Gasket, 941 Drawer
Part No. PD51581
$44.82- 22" x 6-7/8" x 1/2"
- Notched, black gasket
- Commonly Used on Henny Penny Models: MP94X
-
-
GASKET, BLOWER PLATE
Part No. PD128882
$6.24- Gasket, Blower Plate
- Used on various Henny Penny models such as HC-(900, 903, 906, 908, 932, 934, 934DA), HCD-930, HHC-900, HHC-902, HHC-903, HHC-906, HHC-908, and where part is applicable.
-
GASKET, DOOR
Part No. PD128887
$53.69- Door gasket
- 21-3/4" X 23-3/4"
- Commonly used on various Henny Penny models such as AHC-990, AHC-993, HC-15, HHC-136, HHC-900, HHC-902, HHC-903, HHC-906, HHC-908, HHC-90X, HHC-983, HHC-983 Pizza Hut, HHC-992, HHC-993, HHC-998 and only where part is applicable.
-
Gasket, Door ECC
Part No. PD53858
$253.25- New Style
- Door Gasket
- Used on various Henny Penny models such as ECC611345-01 and where part is applicable
-
-
-
GLASS-CLEAR RH SIDE
Part No. PD201988
$463.41- Clear glass
- Right side
- Commonly used on various Henny Penny merchandiser models and where part is applicable.
-
-
HANDLE, DRAWER
Part No. PD128883
$40.85- Handle, Drawer
- Use for HC-(930, 932, 941, 942, 943, 944), MP-(941, 942, 943, 944)
-
-
-
-
Heater Coil, 120V 750W
Part No. PD35304
$104.87- Heater
- 120 Volts
- 750 Watts
- Commonly used on Henny Penny models such as: HC-900, HHC-900, HHC-901, HHC-902, HHC-903, HHC-904, HHC-906, HHC-908 and where part is applicable.
-
Heater, Air Asy 104V 1000W
Part No. PD33152.59
$93.81- Heater Air Assembly
- 104 Volts
- 1000 Watts
- Commonly used on Henny Penny models such as: AHC-990, AHC-993, HHC-980, HHC-980 Pizza Hut, HHC-990, HHC-996 and where part is applicable.
-
Heater, Lower 230V 400W
Part No. PD11552
$77.39- Heater Lower
- 230 Volts
- 400 Watts
- Commonly used on Henny Penny models such as: CM-5, CM-7, CMT-5, CMT-7, HM-3, HM-5, HM-7, HMI-103, HMI-105, HMT-3, HMT-5, HMT-7, HS-3, HS-5, HST-3, HST-5 and where part is applicable.
-
HEATER, LOWER AIR 208V 650W
Part No. PD201571
$143.83- Lower Air Heater
- 650w
- 208v
- Commonly used on Henny Penny models such as HMR-103, HMR-104, HMR-105, HMR-106, HMR-107, and where part is applicable
-
HEATER, RADIANT-LOWER 208V 2KW
Part No. PD119740
$167.95- Element, 208V, 2000W
- A 86-3/4"
- For Warmer Series: HCW
-
HEATER, RADIANT-LOWER 230V 2KW
Part No. PD119757
$167.95- Element, 230V, 2000W
- A 86-3/4"
- For Warmer Series: HCW
-
-
HEATER,RADIANT-UPPER 230V 800W
Part No. PD119774
$167.95- Element, 230V, 800W
- A 86-3/4"
- For Warmer Series: HCW
-
-
-
-
HI-LIMIT THERMOSTAT
Part No. PD128834
$27.18- Hi-Limit 335 F
- Commonly used on models: AHC-990, AHC-993, BW-4, BW4, BW6, CF-941, CH-108, EPC-2, EPC-3, EPC-4, HC-15, HC-900, HC-( 902, 903, 906, 908, 934, 934DA), HCH-930, HCH-930 CDT, HCH-932, HCH-932 CDT, HHC-136, HHC-900, HHC-901, HHC-902, HHC-903, HHC-904, HHC-906, HHC-908, HHC-980, HHC-980 Pizza Hut, HHC-983, HHC-983 Pizza Hut, HHC-990, HHC-992, HHC-993, HHC-996, HHC-997, HHC-998, Henny Penny, MP-941, MP-942, MP-943, MP-944, SCD-6, SCD-8, & where part is applicable
-
Hinge, Cam Lift 7/8" Offset
Part No. PD27592
$97.32- Cam Lift Hinge
- 7/8" Offset
- 4-3/8" long
- Width 1-1/8"
- Outside screw centers are 2-1/16"
- Use for Henny Penny models such as HC-900, HC-903, HC-906, HC-908, HC-934DA and where part is applicable.
-
-
INNER GLASS PANEL WITH HINGES
Part No. PD199447
$492.96- Inner Glass Pane
- Includes:
- Frame
- Hinges
- Commonly used on various Rational models such as CM62E, CM62G, CMP62E, CMP62G, SCC62G, SCCWE62E, SCCWE62G and whjere part is applicable.
-
KIT PBI3 CONNECTING
Part No. PD198204
$237.28- PBI3 Connecting Kit
- Commonly used on Henny Penny model HMI-103
-
Kit Thermometer, HHC90X/HCX/CW
Part No. PD33255.5
$84.59- Thermometer
- Temperature 30 to 240F
- Mounting Rear U Clamp
- 7/16" X 3"
- Commonly used on Henny Penny models such as: CW-114, CW-216, HC-15, HC-900, HCD-930, HCD-930 CDT, HCD-932, HCH-930, HCH-930 CDT, HCH-932, HCH-932 CDT, HCS-2, HCW-5, HCW-8, HDC-932 CDT, HHC-136, HHC-900, HHC-902, HHC-903, HHC-906, HHC-908 and where part is applicable.
-
Kit, Bearing Drw Rulon 930/32
Part No. PD198371
$36.17- Bearing Kit
- Drawer Rulon
- 2 Bushings
- 2 Bolts
- 2 Acorn Nuts
- Tan
- Depth: 9/16" or 14mm
- Outer Diameter: 1" or 25mm
- Commonly used on Henny Penny models such as: HCD-930, HCH-930, HCH-930 CDT, HCH-932, HCH-932 CDT and where part is applicable.
-
KIT, HC94X, DRAWER BEARING
Part No. PD128892
$69.99- Bearing Kit
- Use for HC-(941, 942, 943, 944), MP-(941, 942, 943, 944)