Groen steam jacketed kettles are available in either electric or gas configurations. These high-quality and efficient kettles set the standard for consistent performance in commercial kitchens. They are energy-efficient and help lower utility bills and improve operations. The Groen construction is heavy-duty to ensure years of worry-free operation. With special features such as reinforced rims, they stand up to the demands of busy commercial kitchens. Groen gas-heated kettles are 58-65% efficient. In 2014, Groen kettles were awarded Foodservice Equipment & Supplies magazine's Best-in-Class by the foodservice consultant community. You can always rely on a Groen kettle to bring satisfaction to your food service requirements in your restaurant or commercial kitchen. See our list of Groen Kettle parts below.
-
Valve, Steam, Supply 3/8" NPT
Part No. PD50535
$665.16- Steam supply valve
- 3/8" FPT
- 1-7/8" width
- 5" stem length
- With hand wheel
- Commonly used on Groen such as : TDC/2, TDC/2-10, TDC/2-20, TDC/3-10, TDC/3-20, TDC/3-24, TDC/3-3, TDC/3-6, TDO, TDO/1, TDO/1-32, TDO/1-64, TDO/1-72 where part is applicable.
-
Actuator 51, 32" through 36" Diameter
Part No. PD54279
$1,609.28- Actuator
- #51
- 32" through 36" diameter units
- Used on various Groen models such as MW-DT-60, MW/FPC, where part is applicable.
-
Actuator Mechanical
Part No. PD45107
$6,143.25- Mechanical actuator
- Commonly used on various Groen braising pan models such as CFPC-3, CHFP/1-3, CHFP/1E-3 and where part is applicable.
-
-
Air Vent - Bottom Mount, 25 PSI
Part No. PD54334
$541.11- Air Vent - Bottom Mount
- 25 PSI
- 1/2" x 3/4"
- Commonly used on Groen models such as EE, EE-40 where part is applicable.
-
Assembly, Stem 3" valve
Part No. PD61491
$867.98- Stem
- Stainless Steel
- Comes with O Ring and Acorn Nut
- Original black rubber head model
- DuPont Viton Elastomer Coated
- For 3" steam jacketed kettle faucets
- Used on various Groen models such as D20, D40, D60, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40, FT, MW/D, MW/DT, MW/FT, PT and only where part is applicable
-
BALL VALVE, 1/2" W/SHORT HANDLE
Part No. PD45045
$71.00- Ball valve
- 1/2 inch
- Short handle
- Commonly used on various Groen models such as SX-208-8-3, XS, XS-208-12-3, XS-208-14-3, XS-208-6-1, XS-208-8-1, XS-208-8-3, XS-240-12-3, XS-240-14-3, XS-240-6-1, XS-240-8-1, XS-240-8-3, XS-480-12-3, XS208-12-3, XSG-5 and where part is applicable.
-
Barrier Insulation
Part No. PD61058
$27.54- BARRIER INSULATION for GROEN MODELS such as:BPM-30G, BPM-30GS, BPM-40G, BPM-40GS, BPP-30G, BPP-40G, DEE/20, DEE/40, DEE/60, DH/DHT-80, DHS-40, DHS/T-40, TDB/6, TDB/7, TDB/7-20, TDB/7-40, TDBC-20, TDBC-40, TDH-40, TDHC-20, TDHC-40 and where part is applicable
-
Baso "Husky" Thermocouple -36"
Part No. PDG10650
$61.86- Baso "Husky" Thermocouple -36"
- Use for AH/1, AH/1 E, DHT-20
-
BEARING AGITATOR, WHITE
Part No. PD61200
$90.41- Bearing, Agitator
- Approx 1" in length OD is 1" ID is 3/4"
- White
- Plastic
- Cylinder shaped
- Commonly used on Groen models such as: DB/8-20-CFC and where part is applicable.
-
Bearing Housing Assy
Part No. PD66055
$1,398.54- Contains: Housing, bearing sleeves, grease fittings.
- Use on various Groen Models such as: DH-20, DH-60, DH/1-40, DH/DHT-20, DH/DHT-40, DH/DHT-60, DHS-40, DHS/T-40, DHT-20, DHT-60, DHT/1-40 and where part is applicable.
-
BEARING, BALL
Part No. PD66056
$109.65- Ball Bearing
- Commonly used on various Groen models such as DEE/20, DEE/4, DEE/40, DEE/60, DH-20, DH-60, DH/1-40, DH/DHT-20, DH/DHT-40, DH/DHT-60, DH/DHT-80, DHS-40, DHS/T-40, DHT-20, DHT-60, DHT/1-40 and where part is applicable.
-
BLADE SCRAPER, LARGE
Part No. PD48123
$457.25- Scraper Blade
- Large
- 7" Wide at widest point
- Used on various Groen models such as DH/INA/2-100, INA/2, INA/2-100 TW and where part is applicable.
-
BONNET FOR 1-1/2" DRAW OFF VALVE
Part No. PD35071.1
$178.31- Bonnet
- Stainless steel
- For draw off valve
- 1-1/2
- Used on Groen kettles series: AE, AH, CAH, CDC, D,D2, DAH, DCAE, DCEE, DEE, DH, DL, DT, DTA, EE, EM, FT, GPT, GT, HH, PT.
-
BONNET, S/S - for 1.5" VALVE
Part No. PD117913
$96.19- Bonnet
- For 1.5" draw off valve
- Stainless Steel
-
BONNET, S/S - for draw off valve, 2"
Part No. PDG10653
$185.33- Bonnet
- Stainless Steel
- 2"
- Commonly used on Groen models: AH-20, AH-40, AH-60, AH-80, D20, D40, D60, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40, EE, EE-60, EE-80, EE-100, FT, MW/FT, PT and where part is applicable.
-
-
Bracket Faucet Mounting
Part No. PD36387
$89.97- Use on various Groen models such as AH-20, AH-40, AH-60, AH-80, AH/1E-100, AH/1E-20, AH/1E-40, AH/1E-60, AH/1E-80, AHS-40, DH-20, DH-60, DH/1-40, DH/DHT-20, DH/DHT-40, DH/DHT-60, DHS-40, DHS/T-40, DHT-20, DHT-60, DHT/1-40, and where part is applicable
-
Bracket For Microswitch
Part No. PD35695
$100.86- Bracket For Microswitch
- Commonly Used on Groen Models: TDB/7-20
-
Bumper
Part No. PD61059
$47.83- Bumper TDB/7
- Commonly used on Groen such as : TDB/7, TDB/7-20, TDB/7-40 where part is applicable.
-
BURNER ASSEMBLY WITH 12 JETS
Part No. PD45026
$911.25- Burner Assembly with Jets
- No. 2
- Manifold with 12 jets only.
- Brass
- 3.65" L x 15.3" W x 2.85" H
- Commonly used on various Groen kettles such as THD-40 and only where part is applicable.
-
Burner Asy DH-60 Nat 02
Part No. PD44238
$3,086.70- Burner Assembly
- Natural Gas
- Includes
- 25 Burner Jets,
- Reducing Bushing
- Pipe Plug
- Elbow
- Nipple
- Used on various Groen models such as DH/DHT-60, DHS-40, DHS/T-40, DHT-60 and where part is applicable.
-
BURNER JET #651 - 1.15MM (0.0453) 7/16-2
Part No. PD42351
$57.86- Commonly used on Groen models: TDH-40, TDHC-40
-
-
BURNER JET #654, 1.25mm (0.0492)
Part No. PD45010
$113.49- Burner Jet
- #654
- 1.25mm (0.0492)
- Commonly used on various Groen models such as DHT1P-40 and where part is applicable.
-
Burner Jet 1/8-27NPT 57
Part No. PD42392
$106.70- Burner Jet
- Used on various Groen models such as TDH-40 and where part is applicable.
-
BURNER, ASSEMBLY W/JETS
Part No. PD30305
$2,136.53- Burner Assembly
- Commonly used on Groen models DH/1-40, DHT/1P-40 and where part is applicable.
-
CASTER KIT, SET OF 4
Part No. PD45178
$964.16- Kettle casters
- Set includes 4
- Commonly used on various Groen models such as TDH40 and where part is applicable.
-
-
Coil Ignitor 115V
Part No. PD128647
$185.64- Coil Ignitor 115V
- Igniter W/ Molex Plug
- 14" Wire Lead
- 115V
- Commonly used on Groen such a : CHFP/2-3, CHFP/2-4, CHFP/2E-3, CHFP/2E-4, HFP-2E-4, HFP/2-2, HFP/2-3, HFP/2E-2, HFP/2E-3, HFP/2E-4, NHFP(E)-3, NHFP(E)-4, NHFP-4 where part is applicable.
-
Collare Set 1 1/2ID
Part No. PD35694
$56.21- Collare Set 1 1/ 2 Id
- Commonly used on Groen such a : FPC, TD/FPC, TDB-20, TDB-40, TDB/7, TDB/7-20, TDB/7-40, TDH-20, TDH-40 where part is applicable.
-
-
COMPRESSION FITTING 3/8" MPT x 3/8" CC
Part No. PD61107
$26.10- Compression Fitting
- 3/8" fitting
- Fits various Groen models such as the DH/DHT-80, HY-6G, and where part is applicable.
-
Contactor 50Amp 3Pole 110V
Part No. PD43272
$221.34- Original Furnas contactor is obsolete this contactor is made by Hartland
- 3 Poles
- Coil 110-120 Voltage
- Inductive Rating 40 Amp
- Resistive Rating 50 Amp
- 2-5/8" Width
- 3-3/4" Height
- 3-1/4" Depth
- 1-5/8 x 3-1/4" centers
- Used on various Groen model such as where part is applicable
-
-
Contactor, 208/240V, 40A
Part No. PDG11341
$116.76- Contactor
- 208/240V
- 40-50A
- 4 poles
- 1/4" male terminals
- 1-7/8 center x 3-1/4"
- Commonly used on Groen such a : TDB/7, TDB/7-20, TDB/7-40 where part is applicable.
-
CONTACTOR- 3-POLE 120V 35A
Part No. PD10929
$64.58- Hartland Contactor
- 3 Pole
- 110/120 Volt
- 30 Amp Inductive
- Commonly used on Groen such a : FPC, FPC/1, FPC/1-2, FPC/1-3, FPC/1-4, MW/FPC, MW/FPC/1, TD/FPC where part is applicable.
-
Control Dc Adjustable, 115V In
Part No. PD51949
$4,246.37- 115V
- Commonly used on Groen such as : TDB-20 TA/2, TDB-40 TA/2 where part is applicable.
-
CONTROL, WATER LEVEL BOARD
Part No. PD128573
$378.83- Control Water Level
- New Style since 2011
- 230V
- LWCO
- 4 poles
- 8/16 amps
- 3 hole mount
- 2-3/4 centers, 2-7/8 centers
- Use for Groen Series: DEE/20, DEE/4, DEE/40, DEE/60, EE-100, EE-20, EE-40, EE-60, EE-80, TDB-20, TDB-40, TDB/7, TDB/7-20, TDB/7-40, TDB-9 and where part is applicable.
Note: The manufacturer of this board has changed its design. LED is now small tan colored cube next to capacitor at position D11.
-
-
CONVERSION NAT TO LP GAS, KIT
Part No. PD11864
$42.19- Conversion Kit
- Johnson
- Natural to LP GAS
- .75" L x .95" W x .65" H
- Spring & Warning Label included
- Used on various Groen models such as C/2-G, CC10-G, CC20-G, (2)HY-5G, HY-5G and where part is applicable.
-
-
Cover, Actuator Body
Part No. PD52006
$97.64- Body Actuator
- Commonly used on Groen such as : DH40, CFPC/2-3, CFPC/2-4, CHFP/2-3, CHFP/2-4, CHFP/2E-3, CHFP/2E-4 where part is applicable.
-
Cover, Instrument Box
Part No. PD38390
$159.72- Instrument Box Cover
- Commonly usd on Groen models such as AH180 and where part is applicable
-
Dial, 1-10
Part No. PD126914
$15.17- Dial
- 1-10
- Color/Material Black Plastic
- Original Application: Infinite Switch
- 2-1/4" Diameter
- Mount Size Type 3/16"
- D-Stem Flat Right
-
Diverter Draft 6Inch
Part No. PD38387
$518.78- Draft Diverter
- 6"
- Metal
- Commonly used on Groen such as : AE/1-20, AE/1-40, AH/1E-20, AH/1E-40, AH/1E-60, AH/1E-80, AH/1E-100 where part is applicable.
-
Diverter Draft 7"
Part No. PD40128
$628.04- Draft Diverter
- #758
- Mounts on back of unit.
- Commonly used on Groen such as : AE/1-100, AE/1-40, AE/1-60, AE/1-80, AH/1E-100, AH/1E-60, AH/1E-80 where part is applicable.
-
Door Insulated Pilot
Part No. PD16243.1
$111.59- Door Insulated Pilot
- 4" Diameter
- Commonly used on Groen such as : AE/1-100, AE/1-20, AE/1-40, AE/1-60, AE/1-80, AH-20, AH-40, AH-60, AH-80, AH/1E-100, AH/1E-20, AH/1E-40, AH/1E-60, AH/1E-80 where part is applicable.
-
DRAW-OFF VALVE, 2" W/O HANDLE
Part No. PD42608
$642.71- Draw Off Valve
- 2"
- No Handle
- Must be brazed to unit
- Commonly used on Groen models: AHS-40, D20, D40, D60, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40, EE-100, EE-20, EE-40, EE-60, EE-80, FT, MW/D, MW/DT, MW/FT, PT
-
ELECTRODE WATER LEVEL
Part No. PD128576
$84.17- Water Level Electrode
- 10-1/4" Overall
- Use for Series: AE, AH, CAH, DAH, DCAE, DCEE, DEE, EE, EM, HH
- Commonly used on Groen models such as 100E-KLS, 20E-KLS, 40E-KLS, 60E-KLS, 80E-KLS, AE/1-100, AE/1-20, AE/1-40, AE/1-60, AE/1-80, AH-20, AH-40, AH-60, AH-80, AH/1E-100, AH/1E-20, AH/1E-40, AH/1E-60, AH/1E-80, AHS-40, EE-100, EE-20, EE-40, EE-60, EE-80, HH/4, HH/4E and where part is applicable.
-
ELECTRODE, WATER LEVEL
Part No. PD128577
$116.66- Water Level Electrode -7-3/8" Overall
- Use for Series: DEE
-
ELEMENT 480V 3PH REPLACEMENT KIT
Part No. PD61118
$2,080.43- Element Replacement Kit
- 480V 3PH
- used on various Groen models such as VRC-3E, VRC-6E
- Dimensions of Element is 17-1/2" X 12-1/4"
- and where part is applicable
-
Element Heater, 240v 2kw
Part No. PD61576
$373.62- Element Heater
- 240v
- 2kw
- Commonly used on Groen models such as AE/1-100, AE/1-20, AE/1-40, AE/1-60, AE/1-80 and where part is applicable.
-
-
FAUCET BRACKET
Part No. PD52689
$69.03- Use on various Groen models such as: BPM-30G, BPM-30GS, BPM-40G, BPM-40GS, BPP-30G, BPP-40G, DH/DHT-80, TDB-20, TDB-40, TDBC-20, TDBC-40, TDH-20, TDH-40, TDHC-20, TDHC-40 , and where part is applicable
-
FAUCET VALVE BODY 1-1/2" w/PLASTIC WHEEL
Part No. PD10730
$584.25- Kettle Draw-Off Valve
- w/black platic wheel
- 1-1/2 stem
- Stainless Steel (No Threads)
- This Valve must be brazed to unit
- Commonly used on Groen models such as D20, D40, D60, DEE/4, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40, FT, MW/FT, PT and where part is applicable.
-
FILL FAUCET ASSEMBLY
Part No. PD124455
$203.78- Single Pantry Faucet W/18" Swing Nozzle
- This Assembly Consists Of Single Pantry Faucet Base & An 18" Swing Nozzle
-
FITTING, GAUGE GLASS HOLDER (PAIR)
Part No. PD33910.3
$171.95- Sight glass fitting holders
- 1/2" MPT
- 2 ea
- Used on Various Groen Models Such AS: AE/1-100, AE/1-20, AE/1-40, AE/1-60, AE/1-80, AH/1E-100, AH/1E-20, AH/1E-40, AH/1E-60, AH/1E-80, AHS-40, DEE/4-20, DEE/4-40, DEE/4-60, EE-100, EE-20, EE-40, EE-60, EE-80
- and where part is applicable
-
-
-
-
Foot Adjustable Bullet
Part No. PD40909
$63.81- Foot Adjustable Bullet
- Commonly used on Groen such as : EE-100, EE-20, EE-40, EE-60, EE-80 where part is applicable.
-
FUSE 3 AMP BUSS #BAF-3
Part No. PD41823
$30.28- Commonly used on Groen models: DEE/20, DEE/4, DEE/40, DEE/60, FPC, FPC/1, FPC/1-2, FPC/1-3, FPC/1-4, MW/FPC, MW/FPC/1
-
Fuse Holder 15Amp 300V
Part No. PD53455
$106.94- Fuse up to 300V
- 15A
- For 13/32" x 1-5/16" Fuse
- 1/4" Tabs
- Used on various Groen models such as DEE/20, DEE/4, DEE/40, DEE/60, EE-100, EE-20, EE-40, EE-60, EE-80, TDB/7, TDB/7-20, TDB/7-40 where part is applicable
-
-
GAS CONTROL VALVE, 25V, DUAL
Part No. PD114114
$498.45- Gas Control Valve
- Dual
- 25V
- Gas In 1/2" NPT
- Gas Out 1/2" NPT
- 179,000 BTU/Hr
- Type Gas Natural
-
Gas Valve, Natural Gas
Part No. PD10836.3
$924.02- Pilot Gas Control Valve
- 4" wide
- 3/4" Npt Gas In/Out
- 1/4" CCT Pilot Out
- 2 Lead
- Millivolt Operator
- Includes Natural Gas To LP Conversion Kit Commonly used on various Groen models such as BPM-15GS, BPM-30GS, BPM-40GS, CHFP/1-3, CHFP/1-4, CHFP/1E-3, CHFP/1E-4, CHFP/2-3, CHFP/2-4, CHFP/2E-3, CHFP/2E-4, NHFP(E)-3, NHFP(E)-4, NHFP-4 and only where part is applicable.
-
GAS VALVE, SAFETY NG
Part No. PD11949
$611.61- Gas Valve
- 25V Coil
- NG
- 1/2" npt in/out
- 1/4" pilot in/out
- Baso/Johnson
- Used on various Groen modles such as DH1P-40 where part is applicable.
-
GAS, CONTROL VALVE, NO FITTINGS
Part No. PD48218
$715.21- Gas Control Safety
- Baso
- Nat/LP
- 1/2 PSI
- 120V
- Used on various Groen models such as AH, HH, AH/1, AH/1-30 and where part is applicable.
-
GASKET, BOTTOM COVER
Part No. PD42256
$26.92- Gasket
- Bottom cover
- Commonly used on Groen models such as TDH-20, TDH-40, TDHC-20, TDHC-40 and where part is applicable.
-
-
GASKET, PEDISTAL CAP
Part No. PD10823
$28.44- Pedestal cap gasket
- Used on various Groen models such as TDC/2, TDC/2-10, TDC/2-20, TDO where part is applicable.
-
GASKET, TRUNNION BASE
Part No. PD128581
$91.68- Base Gasket, Trunnion
- 9-1/2 x 10"
- 3 holes x 1/2" diameter
- 2 holes x 1-1/4" diameter
- Molded rubber with ribbed edge
- Use for Groen kettle series: TDC
-
GAUGE GLASS, 5/8" OD x 6"
Part No. PD16721.3
$61.12- Gauge Glass Tube
- Commonly Used On Groen Models: TDB/720, DH/INA/2-100
-
GAUGE LENS COVER
Part No. PD45044
$21.62- Lens Cover
- Service gauge
- Commonly used on various Groen models such as SX-208-8-3, XS, XS-208-12-3, XS-208-14-3, XS-208-6-1, XS-208-8-1, XS-208-8-3, XS-240-12-3, XS-240-14-3, XS-240-6-1, XS-240-8-1, XS-240-8-3, XS-480-12-3, XS208-12-3 and where part is applicable.
-
GAUGE, PRESSURE -30>60 PSI
Part No. PD43711
$71.60- Pressure Gauge
- -30 to 60 PSI Range
- 2-3/4" Dial
- 1/4" NPT
- Bottom type connection
-
Gear Involute 18 Teeth
Part No. PD48012
$574.17- Gear
- 18 Teeth
- Used on various Groen models such as TA/2, TDB-20, TDB-40 and where part is applicable.
-
Gear Worm
Part No. PD38018
$619.05- Gear Worm
- 3 Inch bore
- Commonly used on Groen such as : D20, D40, D60, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40, MW/D, MW/DT where part is applicable.
-
GEAR WORM 3/4" BORE
Part No. PD41796
$196.70- Used on various Groen models such as D20, D40, D60, DL20, DL40, DL60, DL80, DLT20, DLT40, DLT60, DLT80, DT20, DT40, MW/D, MW/DT, DEE/20, DEE/4, DEE/40, DEE/60, DEES-40, FPC, FPC/1, FPC/1-2, FPC/1-3, FPC/1-4, HFP/2, HFP/2E, HFP/2E-2, HFP/2E-3, HFP/2E-4, MW/D, MW/DT, MW/FPC, MW/FPC/1, NHFP/2E, and where part is applicable.
-
Gland Packing 1-1/2"
Part No. PD43319
$92.67- Gland packing
- Commonly used on Groen such as : TDA, TDA-10, TDA-20, TDA/1-40, TDA/1-48 where part is applicable.