Fasteners
9 Part(s)
per page
-
Threaded Cutting Screw 1/4-20 X 3/4
Part No. PD46943
$45.00- Threaded Cutting Screw
- With machine screw threaded pitch
- 1/4-20 x 3/4
- Type F
- Zinc
- Blunt point
- Tapered entering threads
- Multiple cutting edges
-
10-32 Machine Screw Type F
Part No. PD46942
$6.00- Machine Screw
- Hex
- 6 sided, internally threader fastener.
- #10-32
- Zinc
- Design to be specifically used with machine screws.
- Box, 100 each
-
Flat Head Phillips Undercut 10-24 x 1/2
Part No. PD49644
$0.18- Flat Head Phillips Screw
- 10/24 x 1/2
- Undercut Type F
- Zinc
- Thread cutting
- Similar to an 80 degree flat head except the head is undercut to 70% of its normal height. Standard for short lengths because it allows greater length of threads.
- Sold by the each.
-
Flat Washer #10 Stainless Steel
Part No. PD46946
$0.19- Flat Washer
- #10
- Stainless steel, 18-8
- A thin, flat, circular 18-8 stainless steel part with a centrally located hole, used between the bearing surface of the fastener and the part it's attached. This improves stress distribution. Stainless steel provides corrosion resistance against atmospheric conditions such as moisture, salt, and other weather corrosives.
-
-
Machine Screw, SS, Phillips, 6-32
Part No. PD56007
$25.46- Machine Screw
- Round head
- Phillips
- 6-32 x 1/2
- 18-8 Stainless Steel
-
Screw, Phillips, Round Head, 8-32 x 2"
Part No. PD46973
$0.17- Phillips Head Screw
- Round head
- Machine screw
- Thread 8-32 full
- Length 2"
- Steel, zinc finish
- Head Diameter: 0.287 - 0.309
- Head Height: 0.107 - 0.120
- Sold by each
-
STAINLESS STEEL SCREWS 100 PACK
Part No. PD53364
$24.38- Stainless steel machine screw
- 100 per bag
- 2"
- 1/4" - 20 threads per inch
-
Wing Nut, 8-32, Sterel Zinc
Part No. PD46974
$0.06- Wing Nut
- 8-32
- Stamped
- Steel
- Zinc finish
- RoHS compliant
9 Part(s)
per page
© Copyright 2021 SupplyDIRECT, Inc. All Rights Reserved. Atlanta, Georgia