Exhaust Hood Exterior Components

22 Part(s)

Set Descending Direction
per page
  1. CURB, 29" SQ, 16" HIGH,2 12 SLOPE

    Part No. PD16421

    $320.53
    • Roof Curb for Exhaust system
    • 29" SQ
    • 16" HIGH
    • 2 - 12 SLOPE
  2. DRIVE MOTOR C09E4A 1080 RPM 1 Speed

    Part No. PD111456

    $204.76
    • Motor
    • Horsepower :1/3
    • Voltage 115 V
    • Amps :4.80
    • RPM :1080
    • Frequency :60 Hz
    • Length :5.00”
    • Enclosure :Open
    • Shaft Dim. :1/2” x 3.00”
    • Type :Permanent Split Capacitor
    • Speeds :1
    • Diameter :5-5/8”
    • Bearings :Sleeve
    • Rotation :CWSE
    • Protector :Thermally Protected
    • Phase :1
    • Ambient Temp. :40°C
    • Feature(s) :Capacitor & C-Box Included
    • Used on various Loren cook models such as 150-10D AC, ACE, ACRU, ACW, VCRD, SWD and only where part is applicable.
  3. EXHAUST FAN HINGE KIT (PAIR)

    Part No. PD44720

    $89.10
    • Exhaust Fan Hinge Kit  (Pair)
    • Standard Size
    • Includes:
      • Two hinges
      • 8x 1/4-20 self tapping screws
  4. Exhaust Fan, for exhaust hood, roof/wall

    Part No. PD4281

    $2,200.00
    • Exhaust fan assembly for exhaust hood
    • 1 HP
    • 1 or 3 phase are available
    • Belt drive
    • 30" base
    • CFM range 1751 to 4023 @ 1/2 static pressure
    • Spun aluminum
    • Roof or wall mount
    • Upblast centrifugal exhaust ventilator
    • UL 762
    • Wheel 18"
    • Max motor frame 145T
    • Building opening 25.5"
    • Minimum structural components are at a minimum of 16 gauge marine alloy aluminum, bolted to a rigid aluminum support structure.
    • Motor, bearings, and drives are mounted on a minimum of 14 gauge structure with solid vibration isolators.
    • These components are enclosed in a weather-tight compartment and separate from the exhaust airstream.
    • The wheel is centrifugal backward inclined. Constructed of 100% aluminum including a precision machined cast aluminum hub.
    • The motor is heavy-duty permanently lubricated sealed ball bearings and offered at the buyer's requested volts and phase.
    • Bearings are heavy-duty regrettable ball type in a cast iron pillowblock housing. A minimum L50 life in excess of 200,000 hours.
  5. EXHAUST FAN, HOOD

    Part No. PD22143

    $1,449.53
    • Hood Exhaust Fan
    • Spun aluminum roof or wall mounted
    • Belt driven
    • Upblast centrifugal exhaust ventilator
    • Fan shall be listed by Underwritters Laboratories (UL 705). The spun aluminum structural components shall be constructed of minimum 16 gauge marine alloy aluminum, bolted to a rigid aluminum support structure. The motor, bearings, and drives shall be mounted on a minimum 14 gauge steel power assembly, isolated from the unit structure with solid vibration isolators. These components shall be enclosed in a weather-tight compartment, separated from the exhaust airstream. Wheel shall be centrifugal backward inclined, constructed of 100% aluminum, including a precision machined cast aluminum hub. Motor shall be heavy duty type with permanently lubricated sealed ball bearings and furnished at the specified voltage, phase and enclosure. Bearings shall be heavy duty regreasable ball type in a cast iron pillowblock housing selected for a minimum L50 life in excess of 200,000 hours at maximum cataloged operating speed.
    • 115/230V
    • Single phase
    • 1320 RPM
    • 24" base (curb not included)
    • 3/4 HP 1 or 2 phase
  6. EXHAUST HOOD FAN, 3/4HP, 115V

    Part No. PD22144

    $2,341.14
    • Loren Cook Exhaust Assembly
    • Exterior Fan and housing complete
    • 115V
    • 1PH
    • 60HZ
    • 1725RPM
    • no curb
    • no switches
  7. Exhaust Hood Motor (repl Magnetek)

    Part No. PD56508

    $397.00
    • Commercial Exhaust Hood Motor
    • (Formally Magnetek motor)
    • 1725 rpm
    • 120V/208V/230V
    • 3/4 hp
    • (8165420)
    • Commonly used on many Domino stores where applicable
  8. EXHAUST HOOD MOTOR, 1 HP

    Part No. PD16236

    $363.83
    • Electric Motor
    • 1 H.P.
    • 115/208-230V Single Phase
    • Reversible Rotation
    • 1725 RPM
    • Class B
    • Frame 56
    • Marathon 

     

  9. FLAT ROOF CURB, 29 x 29

    Part No. PD19139

    $242.55
    • Roof Curb for Flat Roof
    • 29 x 29 x 21"
    • For exhaust
    • Welded construction
    • 18 gauge galvanized steel
    • Mitered corners
  10. MOTOR, 1 HP, 120V

    Part No. PD47332

    $570.00
    • Motor
    • General purpose
    • 1 Hp
    • 115/230V
    • 60 Hz
    • Frame 56
    • 1140 RPM
    • Rotation  CW/CCW
    • Shaft length 1-7/8"
  11. MOTOR, 1/2 HP 115V 1725 RPM

    Part No. PD19898

    $309.54
    • Electric Motor for Exhaust Motor
    • 1/2 H.P.
    • 115V/230V
    • 1 Phase
    • Rotation reversible
    • Permanently Lubricated
    • 56 frame
    • Class B3
  12. MOTOR, 1/2 HP, 115V

    Part No. PD44333

    $456.23
    • Exhaust Motor
    • Used for exhaust of a hood system.
    • 1/2 HP
    • 1725 RPM
    • 115 volts
    • 60 Hz
    • 7.2 amps
    • Frame 48
    • Type C 
  13. Motor, Direct Drive Fan, 115V 1550 RPM

    Part No. PD51615

    $521.22
    • Direct Drive Fan Motor
    • Replacement motor
    • 1/8 Horsepower
    • 115V
    • 1600 RPM
    • Single Phase
    • Frame is 48Y
    • ODP type enclosure
    • Commonly used on Loren Cook Series fans such as ACE, ACRU, ACW, 90C15D, 90R15D, 90W15D, 100C15D, 100R15D, 100W15D, 100V15D and where part is applicable.
  14. MOTOR, EXHAUST FAN 115V

    Part No. PD61065

    $399.84
    • Exhaust Hood Motor
    • Does not include pulley
    • 1/3HP
    • Frame 48
    • 1725RPM
    • 1/2" shaft OD
    • For many LOREN COOK models where part is applicable.
  15. MOTOR. 208/230-480V 1725 RPM 50/60HZ

    Part No. PD47230

    $464.64
    • Exhaust Motor
    • 208/230-480V
    • 3 PH
    • 50/60 Hz
    • 1725 RPM
    • 1 HP
    • Frame 56
  16. V Belt

    Part No. PD61250

    $24.73
    • V-Belt
    • 1/2" x 21"
    • Commonly used on many Loren Cook models where part is applicable
  17. V BELT,3L190, RAW

    Part No. PD28207

    $56.00
    • V Belt
    • Z19
    • 505 Ld
    • Commonly used on various models such as 8512 and where part is applicable.
    • Please verify serial number by placing in comment box at check out, or please call. If information is not provided then item is non returnable.
  18. V-BELT, 1/2 x 21"

    Part No. PD45931

    $43.01
    • V-Belt
    • 1/2" x 21"
    • Standard design 
  19. V-BELT, 1/2 x 22"

    Part No. PD47322

    $13.17
    • V-Belt
    • 1/2" x 22"
    • Standard design 
  20. V-BELT, 1/2 x 23"

    Part No. PD47323

    $10.91
    • V-Belt
    • 1/2" x 23"
    • Standard design 
  21. Wheel Assembly, CW

    Part No. PD56487

    $470.40
    • Exhaust Hood Wheel
    • Clock Wise
    • A, QT
    • 10 x 4.87
    • with 3/4 QT Bushing
  22. WHEEL, BLOWER 3/4ID x 11-3/4OD

    Part No. PD234746

    $857.39
    • Blower wheel
    • Exhaust Fan
    • 11 3/4" OD
    • 3/4" ID
    • Commonly used on various Pennbarry models such as D10DPBK and only where part is applicable.

22 Part(s)

Set Descending Direction
per page