1+404-794-8110 / USA 800-366-9709
800-366-9709
Shop By

Filter

Use For
  1. Component Hardware (2)
  2. GRNH (1)
  3. Loren Cook (3)
  4. Marathon (1)
  5. Where Part is Applicable (22)

Exhaust Hood Components

Exhaust Hood Components

29 Part(s)

Set Descending Direction
per page
  1. AIR REGISTER

    AIR REGISTER

    Part No. PD47347

    $193.22
    • Air Register
    • 24" x 10"
    • Exact measurement is: 23-3/4" x 9-3/4"

  2. CUP, GREASE (6-5/8 X 4 X 4)

    CUP, GREASE (6-5/8 X 4 X 4)

    Part No. PD231579

    $31.64
    • Grease Cup
    • Stainless Steel
    • 6-5/8 x 4 x 4"
    • NSF certified
    • Keyhole mount

  3. CUP, GREASE (6-5/8 X 4X 2-1/2)

    CUP, GREASE (6-5/8 X 4X 2-1/2)

    Part No. PD231578

    $31.61
    • Grease Cup
    • Stainless Steel
    • 6-5/8 x 4 x 2-1/2"
    • NSF certified
    • Keyhole mount

  4. DRAIN, CANOPY HOOD

    DRAIN, CANOPY HOOD

    Part No. PD126542

    $30.78
    • Canopy Hood Drain
    • Fits 7/8" Hole
    • Use with 1/2" I.D. Hose Or 3/8" O.D. Tubing
    • Lok Nut & Washer Included
    • Nickel Plated Brass
    • Ideal For Use with Grease Tray

  5. Exhaust Hood Filter Removal Tool

    Exhaust Hood Filter Removal Tool

    Part No. PD126538

    $105.61
    • Makes the cumbersome job of reaching and removing filters a simple operation and eliminates unsafe removal procedures. Designed to be used with most major brand hood filters.
    • Fork constructed of nickel plated steel
    • Assembles in less than a minute
    • Fasteners included
    • Lifting prongs adjust from 9-3/4" to 15" (24.77cm to 38.10cm) across to accommodate any filter brand or size
    • 10-3/4" x 14-3/4" (27.30cm x 37.47cm) fork insures stable handling
    • 5 ft (1.52M) pole
    • Fork can be adjusted to five different positions to conform to any hood angle
    • Lightweight for ease of handling
    • Folds flat for easy storage
    • Ground ships only
    • UPS/FedEX oversize shipping fees may apply.

  6. Exhaust Hood Motor, 1800 RPM

    Exhaust Hood Motor, 1800 RPM

    Part No. PD56484

    $342.00
    • Exhaust Hood Motor
    • Frame size 48
    • 1/4 HP
    • Compatibility 115, 120, 115/208-230, 115/230, 120/240
    • 1800 RPM
    • Length less shaft 7-11/16"
    • Body diameter 5-5/8"
    • Full load 5A
    • Rolled steel housing
    • Open drip proof motor enclosure
    • Shaft diameter 0.50"
    • Auto thermal protection
    • Ambient temperature 40 degrees F

  7. GLOBE, PLASTIC COATED GLASS, REF

    GLOBE, PLASTIC COATED GLASS, REF

    Part No. PD125430

    $31.06
    • Plastic Coated Glass Globe Only
    • 3-1/4" diameter x 6-3/4" long 
    • Use for refrigeration use only.
    • Not for use in kitchen exhaust hood applications.

  8. Grease Duct Access Door 10-1/2" x 10-1/2

    Grease Duct Access Door 10-1/2" x 10-1/2

    Part No. PD126539

    $172.10
    • Grease Duct Access Door
    • Outside Dimension 10-1/2" x 10-1/2"
    • For Actual Duct/Opening 7" x 7"
    • U.L. Listed & approved
    • Grease Tight — Air tight
    • Rugged all steel construction
    • Fire proof
    • Easily installed into existing ductwork
    • No bolts penetrate interior of duct
    • Hi-temp resistant gasket
    • Made in USA
    • Meets all mechanical codes & NFPA 96 requirements

  9. Grease Duct Access Door 10-1/2" x 15-1/2

    Grease Duct Access Door 10-1/2" x 15-1/2

    Part No. PD126540

    $201.21
    • Grease Duct Access Door
    • Outside Dimension 10-1/2" x 15-1/2"
    • For Actual Duct/Opening 7" x 12"
    • U.L. Listed & approved
    • Grease Tight — Air tight
    • Rugged all steel construction
    • Fire proof
    • Easily installed into existing ductwork
    • No bolts penetrate interior of duct
    • Hi-temp resistant gasket
    • Made in USA
    • Meets all mechanical codes & NFPA 96 requirements

  10. Grease Duct Access Door 15-1/2" x 15-1/2

    Grease Duct Access Door 15-1/2" x 15-1/2

    Part No. PD126541

    $209.30
    • Grease Duct Access Door
    • Outside Dimension 15-1/2" x 15-1/2"
    • For Actual Duct/Opening 12" x 12"
    • U.L. Listed & approved
    • Grease Tight — Air tight
    • Rugged all steel construction
    • Fire proof
    • Easily installed into existing ductwork
    • No bolts penetrate interior of duct
    • Hi-temp resistant gasket
    • Made in USA
    • Meets all mechanical codes & NFPA 96 requirements

  11. HOOD CLEANING KIT

    HOOD CLEANING KIT

    Part No. PD242824

    $49.19
    • Exhaust hood cleaning kit
      • Includes:
      • Cloth cleaning pad
      • Swiveling head
      • Pole
    • 18 1/2" x 5 1/2" Cleaning pad
    • 60" Pad
    • Aluminum pole

  12. Hood Curtains

    Hood Curtains

    Part No. PD42918

    $140.18
    • Hood curtain
      • Hangs from hood and helps trap smoke so exhaust more efficiently.
      • Helps control heat and contain it under hood zone.
      • Heat resistant
    • 4 foot long with EZ slide rail
    • Curtains are: 2 feet in length x 6 inches wide x 1/8 inch thick

  13. ISLAND BOX EXHAUST HOOD, SS 10'X 6'X 18"

    ISLAND BOX EXHAUST HOOD, SS 10'X 6'X 18"

    Part No. PD17637

    $0.00
    • ISLAND BOX EXHAUST HOOD
    • SS
    • 10' x 6' x 18"

  14. LINK BELT, UNIVERSAL 64

    LINK BELT, UNIVERSAL 64

    Part No. PD47346

    $148.50
    • Universal Link Belt

  15. Motor, Direct Drive Fan, 115V 1550 RPM

    Motor, Direct Drive Fan, 115V 1550 RPM

    Part No. PD51615

    $521.22
    • Direct Drive Fan Motor
    • Replacement motor
    • 1/8 Horsepower
    • 115V
    • 1600 RPM
    • Single Phase
    • Frame is 48Y
    • ODP type enclosure
    • Commonly used on Loren Cook Series fans such as ACE, ACRU, ACW, 90C15D, 90R15D, 90W15D, 100C15D, 100R15D, 100W15D, 100V15D and where part is applicable.

  16. Motor, Split-Phase, 60 Hz, 1/3 HP

    Motor, Split-Phase, 60 Hz, 1/3 HP

    Part No. PD56522

    $168.24
    • Marathon Split Phase Motor
    • General purpose
    • Ball bearing
    • Frame rolled steel, 48Y
    • HP 1/3
    • RPM 1725
    • 115V
    • 60HZ
    • 6.6 amps
    • No thermal protection
    • UL (E6312), CSA (LR2025)
    • Length less shaft 7-3/4"
    • Shaft length 2"
    • Shaft diameter 1/2"
    • CW/CCW
    • Continuous duty

  17. OVEN EXHAUST HOOD W/MAKE UP AIR 6' X 8'

    OVEN EXHAUST HOOD W/MAKE UP AIR 6' X 8'

    Part No. PD17638

    $0.00
    • Oven Exhaust Hood
    • With make up air
    • 6' x 8' x 24" deep

  18. Pan, SS, Solid, 1/3 Size x 4"D

    Pan, SS, Solid, 1/3 Size x 4"D

    Part No. KS101718

    $57.80
    • Pan
    • Grease
    • Stainless steel
    • Solid
    • 1/3 Size X 4"D
    • 1 ea
    • 3-3/4 L x 12-3/4 W x 4 D
    • Heavy duty
    • Constructed of 18/8 stainless steel.
    • 22 Gauge
    • NSF certified

  19. PILLOW BLOCK BEARING EXHAUST FAN

    PILLOW BLOCK BEARING EXHAUST FAN

    Part No. PD61901

    $138.60
    • Exhaust Fan Bearings
    • Set of 2
    • Commonly used on Loren Cook models such as 150V5B and where part is applicable

  20. PROTECTOR, ACOUSTICAL CEILING

    PROTECTOR, ACOUSTICAL CEILING

    Part No. PD244541

    $52.73
    • Acoustical Ceiling Protector
    • Protects Tiles & Grids from Daily Condensation, Dirt, Dust, & Moisture caused by HVAC Grills
    • Doesn't Affect Room Temp
    • Easy to Install
    • 23" x 23"
    • Clear Plastic

  21. Pulley, Die Cast 2" x 1/2", 5/8"

    Pulley, Die Cast 2" x 1/2", 5/8"

    Part No. PD56553

    $18.68
    • Sectional Pulley
    • Belt Width: 1/2 in.
    • Belt section A
    • Product Material: Zinc Die Cast
    • Groove Type: V-Groove
    • Bore Size: 5/8 in.
    • Outer Diameter: 2 in.
    • Limited warranty

    Out of stock

  22. SHEAVE, FIXED 6" X 3/4"

    SHEAVE, FIXED 6" X 3/4"

    Part No. PD47344

    $82.50
    • Sheave
    • Fixed
    • 6" x 3/4"

  23. Switch, on-off control

    Switch, on-off control

    Part No. PD4282

    $80.00
    • Exhaust hood fan switch
    • Controls the fan speed, on/off
    • Pilot switch
    • With pilot light
    • 120/277 volt
    • 20 amp
    • The image might not be directly indicative of the actual switch in appearance.

  24. TENSIONER, HOOD BELT

    TENSIONER, HOOD BELT

    Part No. PD47181

    $116.58
    • Tensioner
    • Hood fan belt
    • Commonly used on exhaust hoods.

  25. TRAY, GREASE, with bracket

    TRAY, GREASE, with bracket

    Part No. PD126543

    $77.36
    • Removable Grease Tray & Bracket
    • Tray is 7" Wide x 6-3/8" Deep
    • Mounts on Canopy @ End of Grease Trough
    • Tray Slides Out For Easy Cleaning
    • Stainless Steel

  26. V BELT 24"

    V BELT 24"

    Part No. PD47157

    $11.51
    • V Belt  Smooth
    • 24"
    • Commonly used on exhaust hood fan motors.

  27. V BELT 27"

    V BELT 27"

    Part No. PD47180

    $11.51
    • V Belt Smooth
    • 27"
    • Commonly used on exhaust hood fan motors.

  28. V BELT 29" Duralflex GL

    V BELT 29" Duralflex GL

    Part No. PD47185

    $11.51
    • V Belt, Smooth
    • Duraflex GL
    • 29"
    • Anti-static, oil and heat resistant
    • Commonly used on commercial kitchen exhaust hood fan motors where part is applicable.

  29. WALL CURB 29.5 (30 x 30)

    WALL CURB 29.5 (30 x 30)

    Part No. PD47509

    $225.00
    1. Exhaust fan mounting curb
    2. 30" x 30" base +/- 29.5
    3. 33.5 ix 33.5 including outside flange
    4. Wall mounting
    5. 18 gauge galvanized steel
    6. Mitered corners
    7. All welded construction

29 Part(s)

Set Descending Direction
per page
Commercial Kitchen Equipment Parts and Cleaning Stuff © Copyright 2021 SupplyDIRECT, Inc. All Rights Reserved. Atlanta, Georgia