Dito Dean Electrolux
-
-
-
-
CHAMBER, CUTTING, BLACK
Part No. PD48353
$205.92- Cutting Chamber
- Black
- 18" x 24" x 6"
- Used on various Dito Dean/Electrolux models such as HOPPER, TRS1V, TRS1V-01, TRS1V-02, TRS1V-03, TRS1V-04, TRS1V-05, TRS1V-06, TRS1V-07, TRS1V-08, TRS1V-09, TRS1V-10, TRS1V-11, TRS22, TRS24 and where part is applicable.
-
-
-
EJECTOR PLATE, BLACK
Part No. PD48352
$92.98- Ejector Plate
- Black
- Plastic
- 10.15" X 25.1" X 4.2"
- Used on various Dito Dean/Electrolux models such as HOPPER, TRS1V, TRS1V-01, TRS1V-02, TRS1V-03, TRS1V-04, TRS1V-05, TRS1V-06, TRS1V-07, TRS1V-08, TRS1V-09, TRS1V-10, TRS1V-11, TRS22, TRS24 and where part is applicable.
-
-
FRY BASKET 8-3/4 X 16-3/4 X 6
Part No. PD57034
$213.69- Fry basket
- Dimensions:
- 8-3/4 wide
- 16-3/4 long
- 6" deep
- Commonly used on various Dean models such as BID80, BK1814, CFHDC, D60, D80, FPHD265, FPHD365, FPHD465, FPHD565, FPHD665, FPHDC, FPRE80, HD150, HD260, SCFHD456, SCFHD460,SCFHD460GN, SCFD63, SCFDC, SM60, SM60G, SM80, SR162GP, XFPRE80, XRE, XYCFRE18, XYSCFRE18 and where part is applicable.
-
Gasket, OVEN 610mm x 430mm
Part No. PD52398
$255.54- Used on Various Dito Dean and Electrolux models such as
-
GRATER DISC W/SUPPORT WHEEL J7
Part No. PD44480
$289.91- Grater Disc with Support Wheel
- OD of Disc is 8-1/8"
- ID of Hole is 13/16"
- Used on various Dito models such as TR21 and where part is applicable.
-
-
LID BUSHING
Part No. PD40024
$58.57- Bushing lid
- Inner Liner
- Lenth : 1" or 25 mm
- Outer Dia : 5/8" or 16 mm
- Inner Dia : 1/2" or 13 mm
- Plastic
- Commonly used on Dito models such as VP1, VP3, 601560 and where part is applicable
-
LID, OUTER (PLASTIC, VP1, VP3)
Part No. PD232293
$311.85- Used on various Dito models such as 601560, VP, VP-3, and where part is applicable.
-
LOCKING HANDLE ASSEMBLY
Part No. PD56644
$156.77- Locking handle assembly
- With screws
- Use on various Dito Dean models such as: TR22, TRS1V-01, TRS1V-02, TRS1V-03, TRS1V-04, TRS1V-05, TRS1V-06, TRS1V-07, TRS1V-08, TRS1V-09, TRS1V-10, TRS1V-11and where part is applicable
-
LOCKING HANDLE ASSEMBLY
Part No. PD48354
$201.15- Locking Handle Assembly
- W/ Screws
- Black
- Used on various Dito Dean/Electrolux models such as HOPPER, TRS1V, TRS1V-01, TRS1V-02, TRS1V-03, TRS1V-04, TRS1V-05, TRS1V-06, TRS1V-07, TRS1V-08, TRS1V-09, TRS1V-10, TRS1V-11, TRS22, TRS24 and where part is applicable.
-
-
Motor
Part No. PD45751
$2,078.43- Motor
- commonly used on Electrolux model VSD-10 and where part is applicable.
-
Motor, 115V, TR22
Part No. PD56462
$688.01- Dito Dean Motor
- 115V
- 60HZ
- .37 KW
- Commonly used on Dito Dean model TR22.
-
POWER BOARD 220/120 VOLT
Part No. PD38800
$561.11- Power Board
- Dual Voltage
- 220/240V
- 120V
- 50/60Hz
- 1PH
- Commonly used on Dito/Electrolux models such as: TR-23, TRS24 and where part is applicable.
Note: dual voltage board and there is a jumper wire that needs set to 120 volts for your unit when applicable.
-
RAMMER (W/2 SCREWS)(CX21)
Part No. PD232242
$175.08- Rammer
- Feeding Arm Screw
- Plunger
- with screws
- Originally Dito-Dean
- CX 21
-
SCREW, PIVOT CUP (10-24 X 3/4 S/S)
Part No. PD232268
$2.28- Pivot Cup Screw
- 3/4"
- 10-24 thread
- Stainless steel
- Flat head
- Commonly used on Dito models VSD-10.
-
SHAFT AND PIN
Part No. PD38867
$239.98- Shaft and Pin
- 6-5/8" length OA
- Threaded end
- with Keyway
- 1/2"-13 thread
- Stainless steel
- Used on Dito-Dean models: TR22, TR23 and where part is applicable.
-
SLEEVE,BEARING (ASSY,BERMIXER)
Part No. PD232271
$260.32- Commonly used on Dito Dean models such as: B2000-40, B2000-60, Berimexer 103 and where part is applicable
-
SPACER; 10 PCS
Part No. PD44703
$74.73- Spacer
- 10 Pieces
- Used on various Dito/Electrolux models and where part is applicable.
-
Swivel Plate Caster w/ Brake 4 Inch
Part No. PD42606
$41.28- Swivel Plate Caster with Brake
- 4" Wheel
- 275 pounds load capacity per wheel
- 2-3/8" X 3-5/8"
- Mount hole centers 1-3/4'" x 3"
- Plate size 2-3/8 x 5/8"
- Tread width 1-1/4"
- Axil bolt 3/8"
- 1/2" bore
- 1-1/2" hub width
- Gray rubber
- With brake
- Commonly used on Dito models: 601560, VP and where part is applicable
-
Swivel Plate Caster w/ Brake, 4"
Part No. PD43407
$34.11- Swivel Plate Caster with Brake
- A = 4" Wheel
- 275 pounds load capacity per wheel
- C & D = 2-3/8" X 3-5/8"
- E & F = Mount hole center 1-3/4'"X 3"
- Tread width 1-1/4"
- Axil bolt 3/8"
- Gray rubber
- With brake
-
-
TERMINAL; 5 PCS
Part No. PD44704
$158.87- Terminal
- 5 pieces
- Used on various Dito/Electrolux models and where part is applicable.
-
-
WATER SEAL
Part No. PD38872
$94.47- Used on various Dito-Dean models such as: TR22, and where part is applicable