CTX

61 Part(s)

Set Descending Direction
per page
  1. ADAPTER, ADJ BAYONET

    Part No. PD139538

    $29.27
    • Commonly use on CTX models: HB-4, HB-6
  2. ASSY, PLATE GROOVED, 2160W DZ33/55,

    Part No. PD140271

    $852.44
    • 22 1/4" Length X 11 3/4" Width X 1" Height
    • Commonly used in CTX model: HB6
  3. ASSY,SWITCH ELECTRIC ON/OFF

    Part No. PD132240

    $80.03
    • Commonly used on CTX models: HB4, HB6
  4. BEARING,FLANGE BLOCK DRIVE

    Part No. PD134900

    $357.99
    • Used on various CTX models such as: HB4, HB6 and where part is applicable.
  5. BELTING,WIRE 18"W 162"L S/S

    Part No. PD133866

    $1,222.36
    • Belt, Conveyor
    • 13.5 feet
    • 18" Wide
    • 7 Link Spaces Wide
    • Used on various CTX models such as DZ33, DZ55 and where part is applicable.
  6. BOARD, DISTRIB, HB4/6, DZ33/55

    Part No. PD140209

    $344.84
    • Used on various CTX models such as HB4/6,DZ33/55, and where part is applicable. 
  7. BOARD, DISTRIBUTION

    Part No. PD14859

    $517.58
    • Commonly used in CTX model: HB6
  8. BREAKER,CIRCUIT 0.5 AMP

    Part No. PD12010

    $59.96
    BREAKER,CIRCUIT 0.5 AMP
  9. BREAKER,CIRCUIT 250V

    Part No. PD140230

    $594.42
    • Commonly used on CTX models: HP-6
  10. BREAKER,CIRCUIT 4 POLE 250V

    Part No. PD12007

    $798.32
    • Circuit Breaker
    • 4 pole
    • 240V
    • 50 amp
    • Commonly used on CTX models such as DZ33, DZ33II, DZ55, DZ55II and where part is applicable.
  11. CABLE, RIBBON 14 PIN M16-F14 40

    Part No. PD132872

    $194.09
    • Commonly used on CTX models: DZ33, DZ55, DZ33II, DZ55II
  12. CABLE, RIBBON 26 PIN F-F 15"

    Part No. PD23619

    $106.30
    • Commonly used in CTX model: DZ55
  13. CABLE, RIBBON 34 PIN F-F 15"

    Part No. PD139841

    $87.58
    CABLE, RIBBON 34 PIN F-F 15"
  14. CABLE,RIBBON 14 PIN M-M 30"

    Part No. PD139671

    $197.18
    • Commonly used on CTX models: DZ33, DZ55, DZ33II, DZ55II, and where part is applicable.  
  15. CAN ASSEMBLY, MENU-SELECT COMPLETE

    Part No. PD37045.24

    $2,134.75
    • Processor is included
    • Commonly used in CTX model: HB6
  16. CHAIN, ROLLING 15-1/2" L, #40

    Part No. PD135752

    $64.23
    • Roller Chain
    • 15-1/2" L
    • #40
  17. CLIP, WIRE BELT MASTER

    Part No. PD12014

    $26.24
    • Wire Master Clip for Belt
    • Commonly used on model DZ3311 and where part is applicable.
  18. CONTACTOR WITH BRACKET, SPRECHER

    Part No. PD140099

    $443.99
    • Contactor
    • 208/240VAC
    • 208v coil
    • 40A
    • 4 pole
    • Open
    • with bracket
    • 4"H x 3.17"W x 3.11"D
    • Non reversing
    • UL, CSA, CE
    • Commonly used on Middleby Marshall models: DZ-55, TCO2114 and where applicable.
  19. CONTACTOR, 208/240/50/60 4P 50/60

    Part No. PD11896

    $443.99
    • Contactor
    • 208/240VAC
    • 40A
    • 4 pole
    • Enclosure Open
    • Quick connect terminal
    • 4"H x 3.17"W x 3.11"D
    • Non reversing
    • 2.75 wide x 3.00" deep x 3.77" high
    • 50 - 60 hz
    • UL, CSA, CE
    • Squared D
    • Commonly used on models: DZ-55, TCO2114 and where applicable.
  20. CONTACTOR,208/240/50/60 4P 50A

    Part No. PD30792

    $295.81
    • Commonly used on CTX models: D255
  21. CONTROL,MENUSELECT G26

    Part No. PD132990

    $2,806.27
    CONTROL,MENUSELECT G26
  22. CONTROLLER, TEMP THERMCP

    Part No. PD11993

    $811.15
    • High Limit Control
    • Used on various CTX models such as CTX 50, CTX 70, DZ33, DZ55, HB-4, HB-6 and where part is applicable. 
  23. COOK TIME KIT (CONTROLLER)

    Part No. PD38280

    $2,078.13
    • Retro fit Kit
    • cook Timer
    • Replaces 00666 & 00665
    • Commonly used in CTX model: 70
  24. CURTAIN, ADJUSTABLE

    Part No. PD12967

    $56.81
    • Used on various CTX models such as DZ3311, and where part is applicable. 
  25. CURTAIN, HEAT

    Part No. PD133257

    $57.24
    • Commonly used on CTX models:
  26. DRIVE, MOTOR (TRI-PHASE) ASSEMBLY

    Part No. PD140405

    $1,626.08
    • Commonly used on CTX models: HB-4, HB-6
  27. DZ55 OWNER'S MANUAL

    Part No. PD23463

    $28.88
    • Owners Manual for CTX model: DZ55
  28. DZ55 TECH MANUAL

    Part No. PD23465

    $28.88
    DZ55 TECH MANUAL
  29. ELECTRODE, IGNITOR

    Part No. PD133972

    $89.98
    • Ignitor
    • Single rod
    • Length is 3-5/8"
    • Used on various Middleby Marshall models such as PS770 and where part is applicable.
  30. FAN, 230 VAC

    Part No. PD26779

    $146.02
    • Axial Fan
    • 230 V AC
    • 50-60Hz
    • 10W
    • 3000 RPM
    • 29 CFM
    • 2 13/16" centers
    • Clockwise rotation
    • Wire leads
    • Used on various Middleby Marshal models such as G-26 and only where part is applicable.
  31. FAN, FILTER, GUARD, PLASTIC 3.12

    Part No. PD133724

    $37.42
    • Fan filter guard
    • Size is 3-1/4 x 3-1/4inches square
    • Used on various CTX models such as G26, CTX-PS200, and where part is applicable.
  32. FAN, PC BOARD DC-12V

    Part No. PD133882

    $206.77
    • PC Board Cooling Fan
    • DC-12V
    • 1.4W
    • Measurement: 2-1/2 x 2-1/2"
    • Used on various CTX models such as HB4, HB6 and where part is applicable.
    • NOTE: This is DC voltage, NOT AC voltage.
  33. FUSEHOLDER

    Part No. PD11967

    $154.13
    • Used on various CTX models such as D255, DZ3311, and where part is applicable.
  34. GASKET,SILICON

    Part No. PD139370

    $16.16
    • Use on various CTX models such as: DX55, and where part is applicable
  35. GEARBELT,120XL 1/5 PITCH

    Part No. PD12016

    $36.63
    • Commonly used on CTX models: HB-4, HB-6
  36. HEATING ELEMENT 208V 5KW 3PH

    Part No. PD44759

    $2,113.38
    • Heating Element
    • 208V  5KW  3PH
    • Moisture resistant box
    • Replacement for obsolete general purpose element.
    • Commonly used on Chromolox steam tables.
  37. KEY, HB OVEN

    Part No. PD135214

    $38.70
    • Commonly used on CTX models: HB4
  38. KIT, CTX MCP ASSY

    Part No. PD15248

    $3,659.62
    • Processor Board
    • Used on various CTX model such as: DZ33, DZ55, HB4, HB6 and where part is applicable.
  39. KIT, PACKING, CTX, DZ33/55 CE, 36441

    Part No. PD135020

    $513.34
    KIT,PACKING DZ33/55 CE
  40. KIT,SERVICE HIGH LIMIT CONTROL

    Part No. PD134963

    $444.28
    • Commonly used on CTX models: HB-4, HB-6
  41. LINK, CHAIN OFFSET #40 ROLLER

    Part No. PD135750

    $24.99
    • Chain Link
    • Offset
    • #40
  42. LOCK ASSEMBLY, BAYONET

    Part No. PD139870

    $134.96
    • Lock assembly, bayonet
    • Use on various CTX models such as: HB-4, HB-6 and where part is applicable.
  43. MAGNET, CERAMIC

    Part No. PD11989.1

    $29.27
    • Used on various CTX models such as HB-4, HB-6, and where part is applicable.
    • Diameter is 5/8"
  44. MEDIA, FILTER 5 PACK

    Part No. PD139451

    $18.90
    • Media Filter
    • 8 pack
    • Commonly used on CTX & Middleby Marshal models DZ3311, PS570G, PS570S and where part is applicable.
  45. MOTOR ASSEMBLY, GEMINI

    Part No. PD12997

    $1,366.51
    • Motor, Kit, Replacement
    • Commonly used on Gemini models: DZ33, DZ55, DZ3311, DZ33II, DZ55II, PS528G, PS536GS, PS536GS-RL, PS624, TCO2114 and where part is applicable
  46. MOTOR ONLY, GEAR

    Part No. PD11544

    $517.44

    CTX/OEM motor is obsolete. This is an alternative. Has been used by our CTX customers for over 10 years. Gear assembly and mounting is OK. Only difference is the wiring. This motor has plain wire leads, no plugs.

    • Permanent Magnet DC
    • Totally Enclosed Non-Ventilated Motor
    • HP 1/8, RPM 1400-1800
    • Armature DC Voltage 90 VDC
    • Mounting Face/Base
    • Service Factor 1.00
    • Bearings Ball
    • Amps at Nameplate Volts 1.5
    • Thermal Protection None
    • Rotation CW/CCW
    • 8.39" length (6.89" less shaft), 0.50 shaft diameter
    • Shaft length 1-1/2"
    • Mounting base O.C. (in.) 6.42 x 2.00
    • Face mounting O.C. (in.) 2.625 x 2.625
    • Original OEM motor last price was $848.00
  47. OWNER'S OPERATING MANUAL CTX HB4 & HB6

    Part No. PD23464

    $20.79
    • Owner Operating Manual for CTX HB4 and HB6
  48. RELAY SOLID STATE

    Part No. PD11900.24

    $263.71
    • 240 Volt
    • 75 Amp
    • Use on various CTX models such as DZ33, DZ55, DZ33II, DZ55II and where part is applicable
  49. SENSOR ASSEMBLY

    Part No. PD44090

    $229.24
    • Used on various CTX models such as HB-4, HB-6, and where part is applicable.
  50. SENSOR, HI LIMIT

    Part No. PD133566

    $356.49
    • Hi-Limit Sensor
    • Commonly used on CTX models such as G26 and where part is applicable.
  51. SHELF,EXIT-SHORT, DZ55 2-PER

    Part No. PD140101

    $307.49
    • Used on Various CTX Models Such As DZ55
    • 21-1/2" x 7-1/4"
  52. SUPPORT, BELT

    Part No. PD139757

    $78.82
    SUPPORT, BELT
  53. SUPPORT, DRIVE BEARING, DZ33/55

    Part No. PD140083

    $290.82
    • Drive Bearing Support
    • Used on CTX models DZ33/55 and where part is applicable.
  54. THERMOCOUPLE PROBE TYPE K

    Part No. PD11997.1

    $105.89
    • Use on various CTX models such as: HB-4, HB-6 and where part is applicable.
  55. THERMOCOUPLE, HB 15.25

    Part No. PD133583

    $115.13
    • Used on various CTX models such as DZ55, and where part is applicable.
  56. TRAY,CRUMB

    Part No. PD139832

    $173.04
    TRAY,CRUMB
  57. VARISTOR ASSEMBLY

    Part No. PD139541

    $35.44
    • Varistor Assembly
    • Used on CTX model DZ3311 and where part is applicable.
  58. VARISTOR, 24V

    Part No. PD133884

    $29.84
    • Commonly Used on CTX Models: DZ55
  59. WLDMT,PLATE 3833W GRV HRTH

    Part No. PD140303

    $623.68
    • 22 1/4" Length X 11 3/4" Width X 1" Height
    • Commonly used on CTX models: DZ 33, DZ 55, HB 4, HB 6 and where part is applicable.
  60. WLDMT,PLATE GRVED HEARTH 2160H

    Part No. PD133771

    $548.25
    • Measurement: 12 x 22 inches
    • Used on various CTX models such as DZ33II (Serial #11-20389-93 and below), and where part is applicable. 
  61. WLDMT,PLATE GRVED HEARTH 230V

    Part No. PD134970

    $596.45
    • Used on various CTX models such as DZ3311, and where part is applicable.

61 Part(s)

Set Descending Direction
per page