CL55 Bulk Series D

48 Part(s)

Set Descending Direction
per page
  1. Bearing Assembly, Lower & Top

    Part No. PD51011

    $144.07

    Kit Assembly Includes:

    • Top and Bottom bearing
    • Upper bearing shim
    • Upper bearing shield
    • Lower bearing race
    • Lower bearing shim
    • Retaining ring
    • O ring seal
    • Installation tool
    • Bearing grease
    • Instructions
    • Used on various Robot Coupe models such as CL 50, CL 52, CL 52-D, CL 55 Bulk, CL 55 Pusher, CL-50, CL-52, CL-55 and only where part is applicable.

    Must verify serial number of model when ordering. This part is ONLY for units with serial numbers 190xxxxx-01 or 31501113w-10 and higher. If no serial number provided part is not returnable.

  2. Bearing Upper 6004 2RS

    Part No. PD51009

    $37.05
    • Commonly Used On Robot Coupe Models: CL50
  3. BEARING, TOP OR BOTTOM, SEALED 6204

    Part No. PD1100950

    $62.84
    • (For the A O Smith motors only).
    • Sealed Bearing
    • 1-9/16 diameter x 11/16 x 7/16"
    • Top or bottom bearing
    • Used on various Robot Coupe models such s R2 (Old Style), R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra
  4. BELT, COGGED OPTIBELT

    Part No. PD38064

    $111.62
    • Belt
    • Used on various Robot Coupe models such as CL50 series D, CL50 series B, CL52-D, CL55-D, CL55, CL401 and only where part is applicable.
  5. Bottom Cover (L)

    Part No. PD162299

    $122.31
    • Commonly used on Robot Coupe models: CL55 Bulk Series D and CL55 Pusher Series D
  6. Bushing

    Part No. PD51014

    $6.03
    • Commonly Used on Robot Coupe Models: CL50
  7. Capacitor (L)

    Part No. PD162220

    $94.82
    • Commonly used on Robot Coupe models: CL55 Bulk Series D and CL55 Pusher Series D
  8. Capacitor Relay (M)

    Part No. PD162454

    $94.53
    • Commonly used on Robot Coupe models: CL55 Bulk Series D and CL55 Pusher Series D
  9. Catch Pan Assy (M)

    Part No. PD162441

    $736.40
    • Commonly used on Robot Coupe models: CL55 Bulk Series D and CL55 Pusher Series D
  10. Catch Pan Support Leg (M)

    Part No. PD162861

    $254.00
    (M)Catch Pan Support Leg
  11. Catch Pan Tray Only (M)

    Part No. PD162710

    $712.64
    • Commonly used on Robot Coupe models: CL55 Bulk Series D and CL55 Pusher Series D
  12. Control Board Retaining Pin (K)

    Part No. PD163142

    $4.41
    (K)Control Board Retaining Pin
  13. Control Wire Connector (K)

    Part No. PD162942

    $29.08
    Control Wire Connector (K)
  14. Cord Strain Relief (M)

    Part No. PD162648

    $7.55
    • Commonly used on Robot Coupe models: CL55 Bulk Series D and CL55 Pusher Series D
  15. CORD, W/PLUG R240, ROBOT COUPE

    Part No. PD2550510

    $53.63
    • Cord with plug
    • SJTOW type
    • 120 V
    • 13 Amp
    • 6' cord
    • 3 wire
    • 16 gauge
    • Commonly used on various Robot Coupe models such as CL 30, CL 50, CL 52, CL 52-D, R 100, R 100 Plus, R 300, R100 PLUS, R100B, R100BCLR, R2B, R2N, R2N Ultra, R2N-ULTRA, R302 and only where part is applicable.
  16. DISC-PLATE STORAGE RACK

    Part No. PD1942050

    $32.50
    • Storage Rack
    • Metal
    • Epoxy coating
    • Holds up to 8 food processor discs
    • 4 1/2" x 13 1/4" x 2 1/2"
    • Prevent blades from hitting each other while in a storage drawer. Protects blade edge.
    • Prevent employees from cutting themselves when handling these sharp blades.
    • Used on various Robot Coupe models such as CL 30, CL 50, CL 55 Pusher, CL 60 Bulk, CL 60 Pusher, Food Processor, R 100, R 100 Plus, R 300, R 301 Ultra, R100, R100 PLUS, R101, R101 Plus CB, R2 Ultra Dice, R2N, R2N Ultra, R2N-ULTRA, R301 ULTRA, R301 Ultra Dice, R301U, R302, R302V, R4, R401A, R402 V. A, R402A, R4N, R4N SERIES D, R4X, R6, R602, R602E, R6N, R6V, R6VN, R6VN-D, R6X and only where part is applicable.
  17. DISCHARGE PLATE (K)

    Part No. PD3209710

    $44.14
    • Discharge Plate
    • 7-5/16" Outer Diameter
    • 3/4" Inner Diameter
    • Black
    • Commonly used on various Robot Coupe models such as CL-50 Series D, CL-52D , CL-55D, CL-60 Series D, R502E, R502X ,CL-50, CL50, CL50E, CL52, CL55, CL60, R4N, R4X, R6N, R6VN, R6X, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL-52, CL-55, CL-60, CL-60E, CL-60E V.V., R4N, R4X, R502E, R502X, R602E, R6V and only where part is applicable.
    • NOTE: Please provide serial number of unit to insure part is correct.
  18. Feed Lead Latch W/Magnet (K)

    Part No. PD163045

    $135.72
    (K)Feed Lead Latch W/Magnet
  19. FOOT (FRENCH MODELS ONLY)

    Part No. PD2713110

    $8.85
    • Foot
    • Rubber 
    • Gray with threaded stud.
    • Exclusively for machines designated as 'French' models.
    • Used on models such as R6 series, CL50, CL55, R4X (with toggle front), R4Y (b/4 3-1996 with toggle front) where part is applicable.
    • When ordering, include your model and serial number of unit. Non returnable if this info is not provided.

     

  20. Front Data Plate (M)

    Part No. PD162512

    $47.85
    • Commonly used on Robot Coupe models: CL55 Bulk Series D and CL55 Pusher Series D
  21. HINGE PIN BUSHINGS (Pair)

    Part No. PD1637110

    $12.58
    • Hinge Pin Bushing
    • Sold as a pair
    • Used on models such as CL50, CL52, CL55, CL60, R4N, R4X, R502E, R502X, R602E, R6N, R6V, R6VN, R6X
  22. HINGE PIN, LID

    Part No. PD1637010

    $47.50
    • Hinge Lid Pin
    • Dimensions are 10-3/8" X 2-1/2"
    • Used on various Robot Coupe models such as R6 Series A & D, R6C, R6N, R6V, R6VN, R6X ONLY, CL30, CL50, CL50E, CL50 Gorurmet, CL50 Ultra E, CL52, CL52 Series D, CL55 Pusher, CL55 Pusher Series D, CL 55 Bulk, CL55 Bulk Series D, CL60 Pusher, CL60 Pusher Series D, CL60 Bulk, R502E, R502X, R602E and where part is applicable .
  23. Magnetic Switch Assembly (K)

    Part No. PD162787

    $72.19
    • Magnetic Switch Assembly
    • Commonly used on Robot Coupe models such as CL50D, CL50E, CL50 Ultra E and where part is applicable.  
  24. Motor Base Assy CL55D

    Part No. PD162653

    $5,316.48
    • Commonly used on Robot Coupe models: CL55 Bulk Series D and CL55 Pusher Series D
  25. Motor CL55D 120/60/1

    Part No. PD162219

    $689.37
    • Motor Assembly
    • Includes
      • Relay
      • Motor
      • Capacitor
      • Upper and lower bearings
    • Used on various Robot Coupe models such as: CL52 Series D serial # 1940111203T-01 and up,  CL55 Bulk Series D and CL55 Pusher Series D and where part is applicable.
  26. Motor Pulley-20 Teeth (M)

    Part No. PD162849

    $157.57
    (M)Motor Pulley-20 Teeth
  27. Motor Support Plate (K)

    Part No. PD162711

    $81.81
    • Commonly used on Robot Coupe models: CL50 D, CL55 Bulk Series D and CL55 Pusher Series D
  28. Mount Spacer for Control Board (K)

    Part No. PD163215

    $41.74
    Mount Spacer for Control Board (K)
  29. O Ring 42x2, CL50D (K)

    Part No. PD162874

    $3.03

     

  30. Off Button (Red) (K)

    Part No. PD162513

    $43.61
    • Button, Off
    • Red in color
    • Commonly used on Robot Coupe models such as CL50 D, CL55 Bulk Series D, CL55 Pusher Series D, CL60 Bulk Series D and CL60 Pusher Series D, CL50E, CL50 Ultra E and where part is applicable.
  31. On Button (Green) (K)

    Part No. PD162581

    $42.91
    • Button, On
    • Green in color
    • Commonly used on Robot Coupe models such as CL50 D, CL55 Bulk Series D, CL55 Pusher Series D, CL60 Bulk Series D,CL-60, CL60 Pusher Series D, CL-60E, CL-60E V.V, CL50E, CL50 Ultra E and where part is applicable.
  32. Plate Locking Nut (Agitator) V2

    Part No. PD162439

    $89.49
    • V2 Agitator
    • Commonly used on Robot Coupe models: CL55 Bulk Series D, CL55 Pusher, CL55 Pusher Series D, CL60 Bulk, CL60 Bulk Series D, CL60 Pusher and CL60 Pusher Series D
  33. Plate Rack (Individual)

    Part No. PD162983

    $36.18
    * Plate Rack (Individual)
  34. Pusher

    Part No. PD162084

    $46.33
    • Commonly used on Robot Coupe models: CL55 Bulk Series D, CL55 Pusher and CL55 Pusher Series D
  35. S.S. Base Cover (M)

    Part No. PD162449

    $427.85
    • Commonly used on Robot Coupe models: CL55 Bulk Series D and CL55 Pusher Series D
  36. Seal Protector

    Part No. PD51013

    $19.89
    • Commonly Used on Robot Coupe Models: CL50
  37. Shaft Kit

    Part No. PD53141

    $514.61
    • Used on Various Robot Coupe Models Such As CL52D, CL55D
  38. Shaft Only (M)

    Part No. PD162216

    $248.81
    • Commonly used on Robot Coupe models: CL55 Bulk Series D and CL55 Pusher Series D
  39. SHAFT PIN, 15/16 SS

    Part No. PD41096

    $11.73
    • Shaft Pin
    • Stainless Steel
    • Length is 15/16"
    • Diameter is 1/4"
    • Used on various Robot Coupe models such as CL50 Series D, B, CL52 Series D, CL55 Pusher Series D, CL55 Pusher, CL55 Bulk Series D, CL55 Bulk,CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL-52, CL-55 and only where part is applicable.
  40. SHAFT PULLEY, 75 TEETH

    Part No. PD38314

    $36.70
    • Commonly Used on Robot Coupe Models: CL50-D
  41. Stand

    Part No. PD162056

    $1,564.12
    • Commonly used on Robot Coupe models: CL55 Bulk Series D, CL55 Pusher and CL55 Pusher Series D
  42. Stud Bolt, Latch

    Part No. PD162378

    $34.04
    • Commonly used on Robot Coupe models: R6 Series (R6N, R6B, R6C), R6N Series A, R6N Series D, R6V Series (R6VN, R6VB, R6VC), R6VN Series A, R6VN Series D, CL50 Series B, CL55 Bulk Series D, CL55 Pusher, CL55 Pusher Series D, CL60 Bulk, CL60 Pusher,
  43. Support Plate Brace (K)

    Part No. PD162712

    $15.93
    • Commonly used on Robot Coupe models: CL50 D, CL55 Bulk Series D and CL55 Pusher Series D
  44. Thrust Bushing

    Part No. PD51007

    $10.90
    • Commonly Used on Robot Coupe Models: CL50
  45. Upper Housing W/Chute (M)

    Part No. PD162850

    $941.28
    Upper Housing W/Chute (M)
  46. Washer

    Part No. PD51008

    $6.03
    • Commonly Used on Robot Coupe Models: CL50
  47. Washer, Plastic

    Part No. PD162334

    $5.22
    • Commonly used on Robot Coupe models: R6 Series (R6N, R6B, R6C), CL55 Bulk Series D, CL55 Pusher, CL55 Pusher Series D, CL60 Bulk, CL60 Bulk Series D, CL60 Pusher, CL60 Pusher, CL60 Pusher Series D and R6C
  48. Whole Head Feed Pusher Assy (M)

    Part No. PD163209

    $1,950.77
    • Pusher Head Assembly Lead
    • Used on various Robot Coupe models such as CL55 and where part is applicable.

48 Part(s)

Set Descending Direction
per page