USA 800-366-9709 / +1-404-794-8110
 
 

Robot Coupe CL52 Series D | Robot Coupe Parts

CL52 Series D

Set Descending Direction

39 Part(s)

per page
  1. Base Cover (L) 118430 PD162217

    Base Cover (L)

    Part No. PD162217

    $348.92
    (L)Base Cover Learn More
  2. BEARING ASSEMBLY, LOWER & TOP 29630 PD51011

    BEARING ASSEMBLY, LOWER & TOP

    Part No. PD51011

    $150.96

    Kit assembly includes:

    • Top and Bottom bearing
    • Upper bearing shim
    • Upper bearing shield
    • Lower bearing race
    • Lower bearing shim
    • Retaining ring
    • O ring seal
    • Installation tool
    • Bearing grease
    • Instructions
    • Used on various Robot Coupe models such as CL50, CL52, CL55, and where part is applicable. 

    Must verify serial number of model when ordering. This part is ONLY for units with serial numbers 190xxxxx-01 or 31501113w-10 and higher.  If no serial number provided part is not returnable.

    Learn More
  3. BELT, COGGED OPTIBELT 515482 PD38064

    BELT, COGGED OPTIBELT

    Part No. PD38064

    $117.16
    • Belt
    • Used on various Robot Coupe models such as both CL50 series D & B, CL52-D, CL55-D, CL55, and where part is applicable.
    Learn More
  4. Bottom Cover (L) 117687 PD162299

    Bottom Cover (L)

    Part No. PD162299

    $128.08
    • Commonly used on Robot Coupe models: CL55 Bulk Series D and CL55 Pusher Series D
    Learn More
  5. Control Board Retaining Pin (K) 117703 PD163142

    Control Board Retaining Pin (K)

    Part No. PD163142

    $3.51
    (K)Control Board Retaining Pin Learn More
  6. Deflector, CL50D 101547 PD162382

    Deflector, CL50D

    Part No. PD162382

    $11.88
    • Deflector
    • Metal
    • 2-1/4" diameter
    • Commonly used on Robot Coupe models: CL50 D where part is applicable. 
    Learn More
  7. DISCHARGE PLATE * (K) 102690S PD3209710

    DISCHARGE PLATE * (K)

    Part No. PD3209710

    $37.70
    • Discharge Plate
    • 7-1/4" Diameter
    • Commonly used on Robot Coupe models such as CL-50 Series D, CL-52D , CL-55D, CL-60 Series D, R4N, R4X, R6N, R6VN, R6X, R502E, R502X and where part is applicable.

    NOTE:  Please provide serial number of unit to insure part is correct.  

    Learn More
  8. Discharge Vane CL60D & CL52D  (Q) 118420S PD162864

    Discharge Vane CL60D & CL52D (Q)

    Part No. PD162864

    $74.50
    • Discharge Vane
    • Length is 7-1/8"
    • Height is 1-5/8"
    • Use on various Robot Coupe models such as CL60D, CL52D and where applicable.
    Learn More
  9. Feed Lead (L) 118427 PD162181

    Feed Lead (L)

    Part No. PD162181

    $393.38
    (L)Feed Lead Learn More
  10. Feed Lead Assy * (L) 29694 PD162494

    Feed Lead Assy * (L)

    Part No. PD162494

    $991.85
    * (L)Feed Lead Assy Learn More
  11. FOOT (FRENCH MODELS ONLY) 500247 PD2713110

    FOOT (FRENCH MODELS ONLY)

    Part No. PD2713110

    $7.62
    • Foot
    • Rubber 
    • Gray with threaded stud.
    • Exclusively for machines designated as 'French' models.
    • Used on models such as R6 series, CL50, CL55, R4X (with toggle front), R4Y (b/4 3-1996 with toggle front) where part is applicable.
    • When ordering, include your model and serial number of unit. Non returnable if this info is not provided.

     

    Learn More
  12. HINGE PIN BUSHINGS (Pair) 29058 PD1637110

    HINGE PIN BUSHINGS (Pair)

    Part No. PD1637110

    $10.58
    • Hinge Pin Bushing
    • Sold as a pair
    • Used on models such as CL50, CL52, CL55, CL60, R4N, R4X, R502E, R502X, R602E, R6N, R6V, R6VN, R6X
    Learn More
  13. HINGE PIN, LID 29061 PD1637010

    HINGE PIN, LID

    Part No. PD1637010

    $46.94
    • Hinge Lid Pin
    • Dimensions are 10-3/8" X 2-1/2"
    • Used on various Robot Coupe models such as R6 Series A & D, R6C, R6N, R6V, R6VN, R6X ONLY, CL30, CL50, CL50E, CL50 Gorurmet, CL50 Ultra E, CL52, CL52 Series D, CL55 Pusher, CL55 Pusher Series D, CL 55 Bulk, CL55 Bulk Series D, CL60 Pusher, CL60 Pusher Series D, CL60 Bulk, R502E, R502X, R602E and where part is applicable .
    Learn More
  14. HINGE PIN, LID 100703 PD46171

    HINGE PIN, LID

    Part No. PD46171

    $49.65
    • Hinge Pin for Lid
    • 10-3/8" x 2-1/2"
    • Used on various Robot Coupe models such as R6 Series A & D, R6C, R6N, R6V, R6VN, R6X ONLY, CL30, CL50, CL50E, CL50 Gorurmet, CL50 Ultra E, CL52, CL52 Series D, CL55 Pusher, CL55 Pusher Series D, CL 55 Bulk, CL55 Bulk Series D, CL60 Pusher, CL60 Pusher Series D, CL60 Bulk, R502E, R502X, R602E and where part is applicable.
    Learn More
  15. Lock for Feed Cover (K) 29501 PD162699

    Lock for Feed Cover (K)

    Part No. PD162699

    $149.24
    • Commonly used on Robot Coupe models: R6N Series D, R6VN Series D, CL50 D, CL55 Pusher Series D, R6C Series D, R6VC Series D and R6X Series D
    Learn More
  16. Lock Nut Wrench (M) 118436 PD162452

    Lock Nut Wrench (M)

    Part No. PD162452

    $29.64
    • Commonly used on Robot Coupe models: CL55 Pusher Series D and CL60 Pusher Series D
    Learn More
  17. Magnet Safety Arm (M) 29705 PD162567

    Magnet Safety Arm (M)

    Part No. PD162567

    $115.34
    • Magnetic Safety Arm
    • Commonly used on Robot Coupe models: CL55 Pusher Series D and CL60 Pusher Series D
    Learn More
  18. Magnetic Switch Assembly (K) 29451 PD162787

    Magnetic Switch Assembly (K)

    Part No. PD162787

    $47.72
    • Magnetic Switch Assembly
    • Commonly used on Robot Coupe models such as CL50D, CL50E, CL50 Ultra E and where part is applicable.  
    Learn More
  19. Motor Assembly 303081 PD162219

    Motor Assembly

    Part No. PD162219

    $774.13
    • Motor Assembly
    • Includes
      • Relay
      • Motor
      • Capacitor
      • Upper and lower bearings
    • Used on various Robot Coupe models such as: CL52 Series D serial # 1940111203T-01 and up,  CL55 Bulk Series D and CL55 Pusher Series D and where part is applicable.
    Learn More
  20. Motor Pulley-20 Teeth (M) 29532 PD162849

    Motor Pulley-20 Teeth (M)

    Part No. PD162849

    $141.57
    (M)Motor Pulley-20 Teeth Learn More
  21. Motor Support Plate (K) 117689 PD162711

    Motor Support Plate (K)

    Part No. PD162711

    $82.81
    • Commonly used on Robot Coupe models: CL50 D, CL55 Bulk Series D and CL55 Pusher Series D
    Learn More
  22. Mount Spacer for Control Board (K) 29533 PD163215

    Mount Spacer for Control Board (K)

    Part No. PD163215

    $41.34
    Mount Spacer for Control Board (K) Learn More
  23. O Ring 42x2, CL50D (K) 504219 PD162874

    O Ring 42x2, CL50D (K)

    Part No. PD162874

    $2.52
  24. Off Button (Red) (K) 502169S PD162513

    Off Button (Red) (K)

    Part No. PD162513

    $43.16
    • Button, Off
    • Red in color
    • Commonly used on Robot Coupe models such as CL50 D, CL55 Bulk Series D, CL55 Pusher Series D, CL60 Bulk Series D and CL60 Pusher Series D, CL50E, CL50 Ultra E and where part is applicable.
    Learn More
  25. On Button (Green) (K) 502170S PD162581

    On Button (Green) (K)

    Part No. PD162581

    $42.38
    • Button, On
    • Green in color
    • Commonly used on Robot Coupe models such as CL50 D, CL55 Bulk Series D, CL55 Pusher Series D, CL60 Bulk Series D and CL60 Pusher Series D, CL50E, CL50 Ultra E and where part is applicable.
    Learn More
  26. Pusher Assy (L) 118428 PD162262

    Pusher Assy (L)

    Part No. PD162262

    $440.06
    • Overall Height is 12"
    • Diameter of Pusher Plate is 6-1/2"
    • Used on various Robot Coupe models such as CL52 Series D and where part is applicable
    Learn More
  27. Pusher Bushing (L) 29691 PD162399

    Pusher Bushing (L)

    Part No. PD162399

    $24.73
    (L)Pusher Bushing Learn More
  28. Pusher Guide Bushing (M) 117321 PD162798

    Pusher Guide Bushing (M)

    Part No. PD162798

    $7.62
    (M)Pusher Guide Bushing Learn More
  29. Pusher Stop Assy (M) 29706 PD162495

    Pusher Stop Assy (M)

    Part No. PD162495

    $26.92
    • Commonly used on Robot Coupe models: CL55 Pusher Series D and CL60 Pusher Series D
    Learn More
  30. Pusher, Small (L) 118324S PD28502

    Pusher, Small (L)

    Part No. PD28502

    $25.45
    • Length is 6-1/2 inches.
    • Commonly used on Robot Coupe models: CL52, CL50D, CL50E, R300, R301, R301 Dice, R301 ULTRA, R301 ULTRA Series C, R301 Ultra Dice, R6N, R6VN, R6X. Does not fit R6N, R6VN & R6X Series A machines.
    Learn More
  31. RESISTOR 29741 PD39990

    RESISTOR

    Part No. PD39990

    $26.92
    • Commonly used on Robot models: CL52 Series D
    Learn More
  32. Seal Protector 203107 PD51013

    Seal Protector

    Part No. PD51013

    $15.45
    • Commonly Used on Robot Coupe Models: CL50
    Learn More
  33. Seal, 24 x 42 x 7 (M)  501678 PD162354

    Seal, 24 x 42 x 7 (M)

    Part No. PD162354

    $28.67
    • Seal
    • 24 x 42 x 7 (M)
    • Commonly used on Robot Coupe models such as CL50 D, CL50E, CL50 Ultra E and where part is applicable.  
    Learn More
  34. Shaft Only (M) 118380 PD162216

    Shaft Only (M)

    Part No. PD162216

    $202.79
    • Commonly used on Robot Coupe models: CL55 Bulk Series D and CL55 Pusher Series D
    Learn More
  35. SHAFT PIN 110308S PD41096

    SHAFT PIN

    Part No. PD41096

    $9.75
    • Stainless Steel
    • Length is 15/16"
    • Diameter is 1/4"
    • Use on CL50 Series D, B, CL52 Series D, CL55 Pusher Series D, CL55 Pusher, CL55 Bulk Series D, CL55 Bulk
    Learn More
  36. SHAFT PULLEY, 75 TEETH 117682 PD38314

    SHAFT PULLEY, 75 TEETH

    Part No. PD38314

    $28.48
    • Commonly Used on Robot Coupe Models: CL50-D
    Learn More
  37. STRAIN RELIEF 515515S PD50033

    STRAIN RELIEF

    Part No. PD50033

    $16.25
    • Strain Relief
    • Used on various Robot Coupe models  such as: Blixer 5V, Blixer 6V, R302, R302V, R4N, R4X, R4Y, R502E, R502X, R502Y, R602E, R602V E, R602Y, R6N, R6VN, R6X, R6Y, R8, R8U.
    Learn More
  38. Upper Housing W/Chute (M) 29628 PD162850

    Upper Housing W/Chute (M)

    Part No. PD162850

    $767.58
    Upper Housing W/Chute (M) Learn More
  39. Washer, Plastic 117200 PD162334

    Washer, Plastic

    Part No. PD162334

    $4.11
    • Commonly used on Robot Coupe models: R6 Series (R6N, R6B, R6C), CL55 Bulk Series D, CL55 Pusher, CL55 Pusher Series D, CL60 Bulk, CL60 Bulk Series D, CL60 Pusher, CL60 Pusher, CL60 Pusher Series D and R6C
    Learn More

Set Descending Direction

39 Part(s)

per page