CL50
-
Bearing Assembly, Lower & Top
Part No. PD51011
$144.07Kit Assembly Includes:
- Top and Bottom bearing
- Upper bearing shim
- Upper bearing shield
- Lower bearing race
- Lower bearing shim
- Retaining ring
- O ring seal
- Installation tool
- Bearing grease
- Instructions
- Used on various Robot Coupe models such as CL 50, CL 52, CL 52-D, CL 55 Bulk, CL 55 Pusher, CL-50, CL-52, CL-55 and only where part is applicable.
Must verify serial number of model when ordering. This part is ONLY for units with serial numbers 190xxxxx-01 or 31501113w-10 and higher. If no serial number provided part is not returnable.
-
-
BELT, 450 Millimeter
Part No. PD52623
$100.46- Belt
- Used on various Robot Coupe models such as CL50 and onnly where part is applicable.
-
BELT, COGGED OPTIBELT
Part No. PD38064
$111.62- Belt
- Used on various Robot Coupe models such as CL50 series D, CL50 series B, CL52-D, CL55-D, CL55, CL401 and only where part is applicable.
-
-
BUSHING, FLANGED, 515493
Part No. PD1258310
$16.43- Commonly used on Robot Coupe models: CL30, CL50 Series B and CL55 Pusher
-
DISCHARGE PLATE (K)
Part No. PD3209710
$44.14- Discharge Plate
- 7-5/16" Outer Diameter
- 3/4" Inner Diameter
- Black
- Commonly used on various Robot Coupe models such as CL-50 Series D, CL-52D , CL-55D, CL-60 Series D, R502E, R502X ,CL-50, CL50, CL50E, CL52, CL55, CL60, R4N, R4X, R6N, R6VN, R6X, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL-52, CL-55, CL-60, CL-60E, CL-60E V.V., R4N, R4X, R502E, R502X, R602E, R6V and only where part is applicable.
- NOTE: Please provide serial number of unit to insure part is correct.
-
DISCHARGE SLING PLATE
Part No. PD16372
$36.98- Discharge Plate
- Unit has oblong center hole
- 7-1/16" Diameter
- Not for R4X or R4N Series D, CL50 E, CL50 D
- Used on various Robot Coupe models such as R4X or R4N Series A, CL50 Series B, CL50 Series A, CL55 Pusher, CL55 Bulk, CL60 Pusher, CL60 Bulk and where part is applicable.
-
Ex-Coarse Grate Grid Only
Part No. PD162913
$135.72- Used on various Robot Coupe models such as CL-50, CL-52, CL-55, and where part is applicable.
-
Fine Grating Grid Only
Part No. PD162760
$135.72- Fine Grating Grid Only
- Commonly used on Robot Coupe models such as CL-50, CL-52 and where part is applicable.
-
Foot, Rubber CL-30, CL-50, R302, R302V
Part No. PD25687
$8.64- Rubber Foot
- Push on style
- Outer Diameter 1 1/4"
- Height 5/8"
- Gray
- Used on various Robot Coupe models such as CL30, CL-50, R302, R302V,CL 50 E,R302 SERIES and only where part is applicable.
- When replacing, it is recommended to replace all 4 so unit stays level and balanced for safe operation.
-
HINGE PIN BUSHINGS (Pair)
Part No. PD1637110
$12.58- Hinge Pin Bushing
- Sold as a pair
- Used on models such as CL50, CL52, CL55, CL60, R4N, R4X, R502E, R502X, R602E, R6N, R6V, R6VN, R6X
-
HINGE PIN, LID
Part No. PD46171
$47.50- Hinge Pin for Lid
- Dimensions are 10" X 2-3/4" X 1/2"
- Used on various Robot Coupe models such asCL 50, CL 52-D, CL 55 Bulk, CL 55 Pusher, CL 60 Bulk, CL 60 Pusher, CL-50 Gourmet, CL-50 Ultra E, CL50E, R4, R4N SERIES D, R6, R602, R602E, R6V, R6VN, CL-50E, CL-52, CL-55, R4N, R4X, R502E, R502X, R602E, R6N, R6V, R6VN, R6X and only where part is applicable
-
Horiz Blade W/Screw (Julienne)
Part No. PD162758
$39.29- Replacement blade
- With Screw
- Used on Various Robot Coupe Models Such As: CL-50, CL-52, CL-55
-
POTATO GRATER
Part No. PD47158
$401.23- Potato Grater
- Metal
- Commonly used on Robot Coupe models such as CL50, CL50 G
-
PUSHER GUIDE ASSEMBLY, CL50U CL50E
Part No. PD52597
$256.48- Pusher Guide Assembly
- Commonly used on Robot Coupe models such as CL-50 Gourmet, CL-50 Ultra E, CL-50Eand where part is applicable.
-
PUSHER KNOB, ROBOT COUPE, 117452S
Part No. PD26507
$23.06- Handle, Pusher
- Black
- Plastic
- Commonly used on various Robot Coupe models such as CL-30, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, R300, R301, R301 Dice, R301 ULTRA, R301 Ultra dice, R302, R302V, R401, R401A, R402, R402 V. A, R402 V.V., R402A, R502E, R502X, R602E, R6N, R6V, R6VN, R6X and only where part is applicable.
-
Relay for Switch
Part No. PD162398
$156.51- Commonly used on Robot Coupe models: CL50 Series B, R6VB Series D, R6X Series A and CL50 Series A with Serial beginning with 92
-
-
-
SHAFT ASSEMBLY
Part No. PD26394
$312.34- FOR SERIES B MODELS ONLY
- FOR MODELS WITH SERIAL NUMBERS 98/xxxxx AND UP
-
SHAFT PIN, 15/16 SS
Part No. PD41096
$11.73- Shaft Pin
- Stainless Steel
- Length is 15/16"
- Diameter is 1/4"
- Used on various Robot Coupe models such as CL50 Series D, B, CL52 Series D, CL55 Pusher Series D, CL55 Pusher, CL55 Bulk Series D, CL55 Bulk,CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL-52, CL-55 and only where part is applicable.
-
Small Pusher (167MM)
Part No. PD41637
$23.83- Small Pusher
- 6-5/8"
- 167 mm
- Use for model CL50 Series B, R6 series where part is applicable.
-
-
-
Vertical Blade (4x4)
Part No. PD162614
$68.34- Used on Various Robot Coupe Models Such As: CL-50, CL-52, CL-55
-
Vertical Blade (8x8)
Part No. PD162616
$132.91- Vertical Blade
- Comb
- 8 x 8
- Commonly used on Robot Coupe models such as CL-50, CL-52 and where applicable.
-