CL50 Series D

36 Part(s)

Set Descending Direction
per page
  1. Base (CL50E, D)

    Part No. PD212074

    $471.67
    • Base
    • Used on models CL50 E and CL50 series D
  2. Bearing Assembly, Lower & Top

    Part No. PD51011

    $144.07

    Kit Assembly Includes:

    • Top and Bottom bearing
    • Upper bearing shim
    • Upper bearing shield
    • Lower bearing race
    • Lower bearing shim
    • Retaining ring
    • O ring seal
    • Installation tool
    • Bearing grease
    • Instructions
    • Used on various Robot Coupe models such as CL 50, CL 52, CL 52-D, CL 55 Bulk, CL 55 Pusher, CL-50, CL-52, CL-55 and only where part is applicable.

    Must verify serial number of model when ordering. This part is ONLY for units with serial numbers 190xxxxx-01 or 31501113w-10 and higher. If no serial number provided part is not returnable.

  3. BELT, COGGED OPTIBELT

    Part No. PD38064

    $111.62
    • Belt
    • Used on various Robot Coupe models such as CL50 series D, CL50 series B, CL52-D, CL55-D, CL55, CL401 and only where part is applicable.
  4. Bracket-Pusher Return (K)

    Part No. PD162851

    $274.75
    Bracket-Pusher Return (K)
  5. Cont Feed Lead w/Extra Safety (D) NLA

    Part No. PD163202

    $0.00
    • Continuous Feed Lead
    • Vegetable Lid
    • With Extra Safety
    • Commonly used on Robot Coupe models such as R6C-D, R6N-D, R6X-D, CL50-D and where part is applicable.
  6. Continuous Feed Lead Assy w/Extra Safety

    Part No. PDA23674

    $1,310.26
    • Continues Feed Lead Assembly
    • with extra safety
    • includes pushers
    • Used on Robot Coupe models such as CL-50 Series D and where part is applicable.
  7. Control Board Retaining Pin (K)

    Part No. PD163142

    $4.41
    (K)Control Board Retaining Pin
  8. Deflector, CL50D

    Part No. PD162382

    $13.90
    • Deflector
    • Metal
    • 2-1/4" diameter
    • Commonly used on Robot Coupe models: CL50 D where part is applicable. 
  9. DISCHARGE PLATE (K)

    Part No. PD3209710

    $44.14
    • Discharge Plate
    • 7-5/16" Outer Diameter
    • 3/4" Inner Diameter
    • Black
    • Commonly used on various Robot Coupe models such as CL-50 Series D, CL-52D , CL-55D, CL-60 Series D, R502E, R502X ,CL-50, CL50, CL50E, CL52, CL55, CL60, R4N, R4X, R6N, R6VN, R6X, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL-52, CL-55, CL-60, CL-60E, CL-60E V.V., R4N, R4X, R502E, R502X, R602E, R6V and only where part is applicable.
    • NOTE: Please provide serial number of unit to insure part is correct.
  10. Foot, Rubber CL-30, CL-50, R302, R302V

    Part No. PD25687

    $8.64
    • Rubber Foot
    • Push on style
    • Outer Diameter 1 1/4"
    • Height 5/8"
    • Gray
    • Used on various Robot Coupe models such as CL30, CL-50, R302, R302V,CL 50 E,R302 SERIES and only where part is applicable.
    • When replacing, it is recommended to replace all 4 so unit stays level and balanced for safe operation.
  11. HINGE PIN BUSHINGS (Pair)

    Part No. PD1637110

    $12.58
    • Hinge Pin Bushing
    • Sold as a pair
    • Used on models such as CL50, CL52, CL55, CL60, R4N, R4X, R502E, R502X, R602E, R6N, R6V, R6VN, R6X
  12. HINGE PIN, LID

    Part No. PD1637010

    $47.50
    • Hinge Lid Pin
    • Dimensions are 10-3/8" X 2-1/2"
    • Used on various Robot Coupe models such as R6 Series A & D, R6C, R6N, R6V, R6VN, R6X ONLY, CL30, CL50, CL50E, CL50 Gorurmet, CL50 Ultra E, CL52, CL52 Series D, CL55 Pusher, CL55 Pusher Series D, CL 55 Bulk, CL55 Bulk Series D, CL60 Pusher, CL60 Pusher Series D, CL60 Bulk, R502E, R502X, R602E and where part is applicable .
  13. LARGE PUSHER WITH KNOB

    Part No. PD38074

    $205.28
    • Large Pusher
    • Stainless steel body
    • For D machines only
    • length is 9"
    • Width is 6-3/4"
  14. Lock for Feed Cover (K)

    Part No. PD162699

    $142.33
    • Commonly used on Robot Coupe models: R6N Series D, R6VN Series D, CL50 D, CL55 Pusher Series D, R6C Series D, R6VC Series D and R6X Series D
  15. Magnetic Switch Assembly (K)

    Part No. PD162787

    $72.19
    • Magnetic Switch Assembly
    • Commonly used on Robot Coupe models such as CL50D, CL50E, CL50 Ultra E and where part is applicable.  
  16. Motor Enclosure Screw

    Part No. PD137059

    $17.43
    • Commonly used on Robot Coupe models: CL50 D, CL50 E
    • 5" 11/16 Overall length
    • 4" 5/8  Rod
  17. Motor Shaft Key 4x4x16 (CL50E)

    Part No. PD137060

    $10.73
    • Key, Motor Shaft
    • 4 x 4 x 16
    • Commonly used on Robot Coupe models such as CL50 D, CL50E, CL50 Ultra E and where part is applicable.
  18. Motor Support Plate (K)

    Part No. PD162711

    $81.81
    • Commonly used on Robot Coupe models: CL50 D, CL55 Bulk Series D and CL55 Pusher Series D
  19. Mount Spacer for Control Board (K)

    Part No. PD163215

    $41.74
    Mount Spacer for Control Board (K)
  20. O Ring 42x2, CL50D (K)

    Part No. PD162874

    $3.03

     

  21. Off Button (Red) (K)

    Part No. PD162513

    $43.61
    • Button, Off
    • Red in color
    • Commonly used on Robot Coupe models such as CL50 D, CL55 Bulk Series D, CL55 Pusher Series D, CL60 Bulk Series D and CL60 Pusher Series D, CL50E, CL50 Ultra E and where part is applicable.
  22. On Button (Green) (K)

    Part No. PD162581

    $42.91
    • Button, On
    • Green in color
    • Commonly used on Robot Coupe models such as CL50 D, CL55 Bulk Series D, CL55 Pusher Series D, CL60 Bulk Series D,CL-60, CL60 Pusher Series D, CL-60E, CL-60E V.V, CL50E, CL50 Ultra E and where part is applicable.
  23. PUSHER KNOB, ROBOT COUPE, 117452S

    Part No. PD26507

    $23.06
    • Handle, Pusher
    • Black
    • Plastic
    • Commonly used on various Robot Coupe models such as CL-30, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, R300, R301, R301 Dice, R301 ULTRA, R301 Ultra dice, R302, R302V, R401, R401A, R402, R402 V. A, R402 V.V., R402A, R502E, R502X, R602E, R6N, R6V, R6VN, R6X and only where part is applicable.
  24. Pusher, Small (L)

    Part No. PD28502

    $26.26
    • Small round Pusher
    • Length is 6 3/4" inches.
    • Outer Diameter 2 5/8" Inches
    • Inner Diameter 2" Inches
    • Gray
    • Plastic
    • Commonly used on various Robot Coupe models such as CL52, CL50D, CL50E, R300, R301, R301 Dice, R301 ULTRA, R301 ULTRA Series C, R301 Ultra Dice, R6N, R6VN, R6X.
    • Does not fit R6N, R6VN & R6X Series A machines and only where part is applicable.
  25. Screw, Base

    Part No. PD51354

    $25.92
    • Screw enclosure
    • Used on various Robot Coupe models such as CL50 and onnly where part is applicable.
  26. Seal Protector

    Part No. PD51013

    $19.89
    • Commonly Used on Robot Coupe Models: CL50
  27. Seal, 24 x 42 x 7 (M)

    Part No. PD162354

    $29.34
    • Seal
    • 24 x 42 x 7 (M)
    • Commonly used on Robot Coupe models such as CL50 D, CL50E, CL50 Ultra E and where part is applicable.  
  28. Shaft

    Part No. PD51012

    $248.81
    • Commonly Used on Robot Coupe Models: CL50
  29. Shaft Assembly

    Part No. PD162401

    $558.71
    • This shaft assembly is used on Series D units with Serial Number starting with 315xxxx (For the CL50) and 317xxxxx (For CL52). 
    • Use on various Robot Coupe models such as: CL50 D, CL52 D, and where part is applicable.
    • If your CL50 unit serial number starts with 190xxxxx, then use part number PD162215
    • If your CL52 unit serial number starts with 194xxxxx, then use part number PD32276 
  30. Shaft Assy (K)

    Part No. PD162215

    $419.88
    • This shaft assembly is for Series D units with Serial Number starting with 190xxxxx.
    • Used on various Robot Coupe models such as CL50 Series D, and where part is applicable.
  31. Shaft Only, CL50D

    Part No. PD162432

    $269.88
    • Commonly used on Robot Coupe models: CL50 D
  32. SHAFT PIN, 15/16 SS

    Part No. PD41096

    $11.73
    • Shaft Pin
    • Stainless Steel
    • Length is 15/16"
    • Diameter is 1/4"
    • Used on various Robot Coupe models such as CL50 Series D, B, CL52 Series D, CL55 Pusher Series D, CL55 Pusher, CL55 Bulk Series D, CL55 Bulk,CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL-52, CL-55 and only where part is applicable.
  33. SHAFT PULLEY, 75 TEETH

    Part No. PD38314

    $36.70
    • Commonly Used on Robot Coupe Models: CL50-D
  34. STRAIN RELIEF

    Part No. PD50033

    $24.28
    • Strain Relief
    • Used on various Robot Coupe models  such as: Blixer 5V, Blixer 6V, R302, R302V, R4N, R4X, R4Y, R502E, R502X, R502Y, R602E, R602V E, R602Y, R6N, R6VN, R6X, R6Y, R8, R8U.
  35. Support Plate Brace (K)

    Part No. PD162712

    $15.93
    • Commonly used on Robot Coupe models: CL50 D, CL55 Bulk Series D and CL55 Pusher Series D
  36. Upper Housing W/Chute (M)

    Part No. PD162850

    $941.28
    Upper Housing W/Chute (M)

36 Part(s)

Set Descending Direction
per page