Fans, Blower Wheels
-
Axial Fan - 115V, CFM 110
Part No. PD18590
$107.97- Axial Fan - 115V
- Commonly used on various BLODGETT models such as: B48D-GGGG, BP-100, BP-50, MG-32, MG3270, MT1828E, MT1828G, MT2136E, MT2136G, MT3240E, MT3240G, MT3255G, MT3855G, MT3870 and where part is applicable.
- 4-11/16" x 1-1/2"
- 120V
- 102 CFM
- 2900 RPM
-
Axial Fan - 120V Fan Only
Part No. PD11337
$91.16- Axial Fan
- 120V
- 30 CFM
- 3300 RPM
- 3-1/8 x 1-1/2" CCT
- Commonly used on various BLODGETT models such as: 1048DD, AC-500, DFG-100, DFG-200, DFG-300, MT3255, MT3255-CE, MT3255E, MT3270, MT3270-CE, MT3255G, MT3270E, ST-300 AA, ST-300 AB, SHO, SHO SERIES, ZEPHAIRE G (with Solid State Controls), ZEPHAIRE G PLUS, ZEPHAIRE 200G and where part is applicable.
-
Axial Fan - 230V, No Leads
Part No. PDG10120
$111.51- Axial Fan
- 230V
- 2900 RPM
- 102 CFM
- 4-11/16 x 1-1/2"
- 4-1/8" hole centers
- CW
- No wire leads
- Commonly used on Blodgett models such as: B14G, BC-20E, BC-20G, BC14G SERIES, BCS-6, BCS-8DS, BCS-8E, BP-100, BP-50, CNV-8E, COS-101, COS-101NSF, COS-101S, COS-101SNSF, COS-20NSF, COS-5H, COS-5HA, COS-6, COS-6NSF, COS-8E, COS-8EDS, CTB, CTB POPEYES, CTB Series, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTB1, CTBR, CTBR POPEYES, CTBR-AP, CTBR-G, CTBR-GFB, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MT2136E, MT2136G, MT3240E, MT3240G, MT3255G, MT3270E, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.
-
Axial Fan - 240V
Part No. PD31079
$133.64- Axial Fan
- 230 V AC
- 50-60Hz
- 10W
- 3000 RPM
- 29 CFM
- 2 13/16" centers
- Clockwise rotation
- Wire leads
- Used on various Blodgett models such as 1200, 1201, 1214, 1400, 1401, 1405, 1411, 1415, COS-5HA, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTB-Series, CTB1, CTBR, CTBR POPEYES, CTBR SERIES, CTBR WENDYS, CTBR-AP, CTBR-G, CTBR-GFB, DFG-100, DFG-200, DFG-50, KCO-25E, LTO SERIES, LTO-1, LTO-10, LTO-2, LTO-20, MARK V, MARK V 111-H, MARK V 111-HD, MARK V 112-H, MARK V 112-HD, MARK V KFC, MARK V SERIES, MARK V Xcel, MARK V-100, MARK V-III, MARK V-IIIH, MARK V-IIIHD, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3270E, Mark V-100 XCEL, Mark V-200, ZEPHAIRE 50E, ZEPHAIRE E, ZEPHAIRE E PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE-200-E, ZEPHAIRE-200-G, ZEPHAIRE-E PLUS, ZEPHAIRE-G, ZEPHAIREG PLUS, Zephaire E, Zephaire-50E, Zephaire-E, Zephaire-G Plus and only where part is applicable.
-
Axial Fan Kit 120V
Part No. PD59476
$91.16- Axial Fan
- Black
- Hard plastic
- 120V
- 30 CFM
- 3300 RPM
- 3-1/8 x 1-1/2" CCT
- Hardware Included:
- 8-32 Wing Nut (4)
- 8-32 x 2" machine screw (4)
- Commonly used on various BLODGETT models such as: 1048DD, AC-500, DFG-100, DFG-200, DFG-300, MT3255, MT3255-CE, MT3255E, MT3270, MT3270-CE, MT3255G, MT3270E, ST-300 AA, ST-300 AB, SHO, SHO SERIES, ZEPHAIRE G (with Solid State Controls), ZEPHAIRE G PLUS, ZEPHAIRE 200G and where part is applicable.
-
BAFFLE & BRACKET KIT
Part No. PD40845
$459.32- Baffle & Bracket
- (Blower wheel cover)
- Commonly used on Blodgett models: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTB XCEL, CTB1, CTBR, CTBR XCEL, CTBR POPEYES, CTBR-AP, CTBR-G, CTBR-GFB and where part is applicable.
-
Blower Wheel CW
Part No. PD44665
$664.74- Blower Wheel
- 9 - 15/16"
- Commonly used on various Blodgett models such as MG32 and where part is applicable.
-
BLOWER WHEEL DFG-50
Part No. PD32236
$331.88- 10-3/4" D x 2-1/4" W
- 1/2 hole
- Flat
- Counter clockwise rotation
- Has puller hub
- Commonly used on various BLODGETT models such as: DFG-50, DFG-50 POPEYES and where part is applicable.
-
BLOWER WHEEL, 10-3/4"
Part No. PD11148.3
$281.43- 10-3/4" diameter x 2-1/8" Wide
- 5/8" hole size
- CW rotation
- Comes with key way
- Commonly used on various BLODGETT models such as: DFG-100, DFG-100 XCEL, DFG-200, SHO-G, SHO SERIES, SHO-100G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.
-
Blower Wheel, 8-1/2"
Part No. PD29857
$140.40- 5/8" Bore Hole
- 8-1/2"Diameter
- 2-1/8 deep
- Concave CCW rotation
- Puller Hub 2 Set Screws and Key Way
-
Cord Set Axial Fan Assy
Part No. PD61534
$27.14- Commonly Used on various BLODGETT models such as: BP-100, BP-50, SHO-E, SHO-G, SHO SERIES, SHO-100E, SHO-100G and where part is applicable.
-
Fan Guard, 4-1/8" Centers
Part No. PD127934
$56.79- Fan Guard
- Wire
- 4-1/8" center holes
- Commonly used on various BLODGETT models such as: AC-500 XCEL, BC14G SERIES, B14G, BC14G, BC-20E, BC20G, BP-100, BP-50, MARK V XCEL, MARK V-100 XCEL, MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT3240E, MT3240G, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE, SHO SERIES, SHO-100E, SHO-100G, SHO-E, DZ3311, PS570G and where part is applicable.
-
Fan, Axial 115V 4"
Part No. PD135704
$114.17- Axial Fan
- Low velocity
- 115V
- For Units built after 8/90
- 4-1/8" Mounting Centers
- Commonly used on various BLODGETT models such as: AC-500 XCEL, BCS-8G, BDO-G, CNV-8G, COS-8G, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-50, DFG-50 POPEYES, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE 100G ES, ZEPHAIRE 200G and where part is applicable.
-
FAN,W/SCR AXIAL 120V DFG50 3"
Part No. PD135742
$72.50- Axial fan, Low velocity, 3" square, built before 8/90.
- Use on various Blodgett models such as: DFG50 and where part is applicable.
-
GUARD, WIRE BAFFLE
Part No. PD66073
$33.04- Use on various Blodgett models such as: CTBR-1 and where part is applicable.
-
KIT, BLOWER WHEEL & KEY
Part No. PD174210
$1,917.80Blower wheel W/ key For BX14 Units manufactured prior to 11/8/2013 Commonly Used on various BLODGETT models such as: BCX-14, BCX-14E, BCX-14G, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G, HV-100E and where part is applicable. -
KIT, BLOWER WHEEL & KEY
Part No. PD840657
$946.95Blower wheel W/ key For BX14 Units manufactured after 11/8/2013 Commonly Used on various BLODGETT models such as: BCX-14, BCX-14E, BCX-14G, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G, HV-100E and where part is applicable. -
WHEEL PULLER, KFC
Part No. PD36742.24
$883.22- Commonly Used on various BLODGETT models such as: BDO-100G-ES, DFG-100 XCEL, DFG-200, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-50, DFG-50 POPEYES, MARK V XCEL, MARK V XCEL SERIES, MARK V-100 XCEL, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 100G ES and where part is applicable.
-
WHEEL, BLOWER
Part No. PD36363
$502.68- Blower Wheel
- Commonly used on Blodgett models such as AC-500, AC-500 XCEL and where part is applicable
-
WHEEL, BLOWER ASSY CTB/BCG 8-1/2"
Part No. PD177202
$207.09- Blower Wheel
- 5/8 Bore Hole
- 8-1/2" Diameter
- 2-1/16" Deep
- Metal
- Commonly used on various Blodgett models such as: CTB series, CTB POPEYES, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTBR, CTBR POPEYES, CTBR-AP, CTBR-G, CTBR-GFB, ZEPHAIRE 50E and only where part is applicable.
-
WHEEL, BLOWER BM DFG 9.875 x 2.0
Part No. PD43038
$240.72- Blower Wheel
- 9-7/8 x 2-1/8
- 5/8 keyway
- 2 square bolts
- CW rotation
- Concaved
- 6 x 1-5/8 holes in back
- Used on various Blodgett models such as DFG-100, DFG-100 XCEL, DFG-200, SHO, SHOSERIES, SHO-100G, SHO-G O/S (2 speed only before 11-15-2005), AC500XCEL and where part is applicable.
-
WHEEL, BLOWER KCO 5-1/2" 31469
Part No. PD177208
$284.97- Blower wheel
- Metal
- 5-1/2"
- Commonly used on various Blodgett models such as: KCO, KCO-25E and where part is applicable.
-
WHEEL, BLOWER LARGE
Part No. PD36952.1
$1,609.21- Blower wheel
- Use on various Blodgett models such as: BC14G OLD, BC-20E, BC-20G, BC14G, BC14G SERIES, BCS-8E, BCS-8G, CNV-14E, CNV14G, CNV-8E, CNV-8G, COS-101, COS-101S, COS-20E, COS-20G, COS-8E, COS-8EDS, COS-8G, COS-8GDS, and where part is applicable