Controls, Panel, Decals, Plates
-
Assembly, Membrane Bezel
Part No. PD36174
$1,062.89- Membrane Bezel Assembly
- Commonly used on Blodgett models such as 1016BVM, U.H.C and where part is applicable
-
B/C/K Kit, Computer, Ser#5x Plus
Part No. PD56012
$1,397.50- Computer Board
- B/C/K
- For units that start with a serial number with the number 5xxxxx. Or after 2010.
- Commonly used on Blodgett models such as BCM-101E, BCM-101E-PT, BCM-102E, BCM-202E, BCM-61-101E, BCM-61-61E, BCM-61E, BCM-61E-PT, BCM-62-102E, BCM-62-62E, BCM-62E, BCP-101E, BCP-101E-PT, BCP-102E, BCP-202E, BCP-61-101E, BCP-61-61E, BCP-61E, BCP-61E-PT, BCT-101E, BCT-101E-PT, BCT-102E, BCT-202E, BCT-61-101E, BCT-61-61E, BCT-61E, BCT-61E-PT, BCT-62-102E, BCT-62-62E, BCT-62E, BLCM-101E, BLCM-101G, BLCM-102E, BLCM-102G, BLCM-202E, BLCM-202G, BLCM-61-101E, BLCM-61-101G, BLCM-61-61E, BLCM-61-61G, BLCM-61E, BLCM-61G, BLCM-62-102E, BLCM-62-102G, BLCM-62-62E, BLCM-62-62G, BLCM-62E, BLCM-62G, BLCP-101E, BLCP-101G, BLCP-102E, BLCP-102G, BLCP-202E, BLCP-202G, BLCP-61-101E, BLCP-61-61E, BLCP-61E, BLCP-61G, BLCT-101E, BLCT-101G, BLCT-102E, BLCT-102G, BLCT-202E, BLCT-202G, BLCT-61-101E, BLCT-61-101G, BLCT-61-61E, BLCT-61-61G, BLCT-61E, BLCT-61G, BLCT-62-102E, BLCT-62-102G, BLCT-62-62E, BLCT-62-62G, BLCT-62E, BLCT-62G and where applicable.
-
Board, Control Tested
Part No. PD176640
$2,867.40- Tested Control Board
- Commonly used on various BLODGETT models such as: BC-20G, BC14G SERIES, BC20G and where part is applicable.
-
BOARD, RELAY (IQ2)
Part No. PD230446
$736.32- Commonly Used on various BLODGETT models such as: CTB, CTB XCEL, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR XCEL, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V-100, MARK V-200, MARK V SERIES and where part is applicable.
-
BOARD, TEMP CONTROL- SOLID STATE
Part No. PD128278
$284.97- Temperature Controller
- Solid State
- 200-500° F
- Cook Only
- Older units have ground connection #11 which is not needed on this board.
- Commonly used on various BLODGETT models such as: 1400, 1405, 1415, AC-500, AC-500 XCEL, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTB-SERIES, CTB1, CTBR, CTBR POPEYES, CTBR-AP, CTBR-G, CTBR-GFB, DFG-100, DFG-200, DFG-300, DFG-50, DFG-100-CH-1, DFG-100-1, DFG-100-2, DFG-100-3, KCO-25E, MARK V, MARK V SERIES, MARK V KFC, MARK V-100, MARK V-200, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.
- Units with no hold timer and reach 500°F Max; KCO-25E; Series: CTB & CTBR; DFG 50, 100, 200 &300; Mark V; Use, 18227 Old
-
BRACKET & BASE, TDR DFG COOK
Part No. PD41265
$370.82- For units before 7/1984
- Mechanical cook only, hot surface ignition 1 SP
- Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.
-
CABLE, COMPUTER
Part No. PD128160
$137.90- Computer Cable
- 10 Ft
- 25 Pin
- Commonly Used on various BLODGETT models such as: MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT2136E, MT2136E-AB, MT2136E-CE, MT2136G, MT2136G-AB, MT2136G-CE, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
-
CABLE, COMPUTER 9-PIN, 10 FOOT
Part No. PD128150
$132.22- Computer Cable
- 10' long
- 9 Pin
- Commonly used on various Blodgett models such as MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT2136E, MT2136E-AB, MT2136E-CE, MT2136G, MT2136G-AB, MT2136G-CE, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
-
CH CONTROLLER, DIGITAL, 14 BUTTON
Part No. PD35487.1
$821.28- Control Kit
- CH-PRO3
- CH controller
- Digital
- 14 button
- Commonly used on Blodgett models: AC-500, AC-500 XCEL, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-100 XCEL, DFG-200, DFG-50, DFG-50 POPEYES, MARK V XCEL, MARK V XCEL SERIES, MARK V-100 XCEL and where part is applicable.
-
COMMUNICATION HARNESS
Part No. PD35590.1
$101.80- Commonly Used on various BLODGETT models such as: 1016BVM, U.H.C., UHC-MCD and where part is applicable.
-
CONTROL & PROBE KIT, BLODGETT 50785
Part No. PD47797
$2,715.19- Control Upgrade Kit
- Probe included
- Used on various Blodgett models such as XR8-E, XR8-G, XR8E, XR8G and where part is applicable.
- For ovens manufactured before 03-20-2007.
-
CONTROL & PANEL ASSY, IQ2, DFG50
Part No. PD840186
$5,418.95- Control and Panel Assembly
- IQ2
- Commonly used on Blodgett model DFG-50, DFG50 where parts are applicable.
-
Control Board
Part No. PD176639
$2,867.40- Control Board
- Tested
- Commonly used Blodgett models such as BC-14EDS, BC14E, CNV-14E and where part is applicable
-
CONTROL BOARD
Part No. PD44714
$3,810.14- Control Board
- XL50E-KFC CLEAN
- Commonly used on various Blodgett models such as XCEL-50EC and where part is applicable.
-
CONTROL BOARD & DRIVE MOTOR, RETRO KIT
Part No. PD128233
$2,100.04- Retro Kit
- Control Board & Drive Motor Kit
- New Style
- Brushless motor
- Commonly used on various BLODGETT models such as B48D-GGGG, MT70PH, MT1820E, MT1828G, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT2136E, MT2136G, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270 (After 9/90), MT3270E, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
To change the direction of motor: There is a two-position Jumper marked P1 on the control board. The center pin is common so simply Identify the P 1 and pull the jumper off and put it on the other position to change belt direction.
NOTE: NOT applicable to MG-32 or MG3270. MG-32 or MG3270 must use PD140444.
-
Control Board, Water Level 120v
Part No. PD36658.1
$606.23- Water Level Control Board
- 120v
- Includes Mounting Clips
- Commonly used on Blodgett models such as BCS-8G, CNV-8G, COS-20G, COS-8G, COS-8GDS and where part is applicable
-
Control Board, Water Level Sensing
Part No. PD840675
$322.14- Water Level Sensing Board
- Used on various Blodgett Models such as BC-20G, BCX-14, BCX-14E, BCX-14G, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G and where part is applicable.
-
CONTROL COVER S/S W/O HANDLE
Part No. PD28906
$220.37- Control Cover
- Stainless steel
- No handle
- Commonly Used on various BLODGETT models such as: 900, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, L900, S900 and where part is applicable.
-
CONTROL FOR BRUSHLESS DC MOTOR
Part No. PD26584
$1,234.89- Conveyor Motor Control, brushless
- The brushless control does NOT have fuses on it. If yours does you DO NOT have a brushless control and this control will not work.
- You must have installed the brushless kit before you can use this control.
- Commonly used on Blodgett models: MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
- Conveyor Motor Control, brushless
-
Control Module Assembly, 1 Speed
Part No. PD39239
$4,307.30- 22 1/2" x 21 3/4" x 3 3/4"
- Commonly Used on Blodgett Models: MarkV-III
-
CONTROL PANEL & CIRCUIT BOARD ASSY
Part No. PD40191
$2,573.38- CLOSED LOOP COMPUTER KIT
- If you have not converted the drive motor to a brushless kit you will need to do so
- Commonly used on some Blodgett models: MT2136G (call to confirm for your unit, have serial number ready)
-
CONTROL PANEL & DECAL ASSEMBLY
Part No. PD45049
$1,340.78- Control panel & decal assembly
- Solid state digital control
- 1 speed ovens
- Commonly used on various Blodgett models such as DFG-100, DFG-200 and where part is applicable.
-
CONTROL PANEL & DECAL ASSY W/LIGHTS
Part No. PD172333
$705.35- Control panel with lights
- Stainless Steel
- Commonly used on various BLODGETT models such as: ZEPHAIRE 240E PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100E, ZEPHAIRE 200E and where part is applicable.
-
Control Panel and Decal
Part No. PD53162
$483.21- Control panel with decal
- Commonly Used on various BLODGETT models such as: MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD and where part is applicable.
-
Control Panel and Decal
Part No. PD53560
$1,487.69- Control panel with decal
- Commonly used on Blodgett models such as: DFG-50 and where part is applicable.
-
CONTROL PANEL AND DECAL ASSEMBLY
Part No. PD57106
$138.06- Control Panel Assembly
- Decal included
- For Solid State Units
- Commonly used on various Blodgett models such as DFG200 and where part is applicable.
-
Control Panel and Decal, DFG
Part No. PD51522
$329.22- Control Panel with Decal
- Dimensions of the front panel 3-11/16" x 22-3/16"
- Glides are on the top and bottom.
- Commonly Used on various Blodgett models such as: DFG-100, DFG-200 and where part is applicable.
-
Control Panel Decal (Cook Only)
Part No. PD128162
$342.50- Control Panel Decal (Cook Only)
- Replaces old style decal
- Commonly Used on various BLODGETT models such as: CTB/CTBR (After 9/86), CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP and where part is applicable.
-
CONTROL PANEL REPLACEMENT
Part No. PD174192
$1,437.24- Control Panel Assembly
- Replacement kit for the Control Panel with two Knobs, two Buttons and Digital Display (prior to 2008)
- Commonly used on various Blodgett models such as 1400, 1405, 1415 and where part is applicable.
-
Control Panel With Decal, Rh Control
Part No. PD48133
$211.52- Panel and Decal
- RH Controls
- Used on ovens manufactured after 11/15/06
- Used on various Blodgett models such as DFG-100, DFG-200 and where part is applicable.
-
Control, Hot Surface Ignition
Part No. PD11479
$728.36- Hot Surface Ignition Control
- 24v
- 50/60hz
- NEC Class 2
- Commonly used on various BLODGETT models such as: 1048DD, AC-500, MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, ST-300 AA, ST-300 AB and where part is applicable.
-
Control, Modular
Part No. PD37597
$463.74- Modular control
- INF 550 D/M1x
- Commonly used on Blodgett models such as: AC-500 XCEL, DFG-100 XCEL, MARK V XCEL, MARK V XCEL SERIES, MARK V-100 XCEL and where part is applicable.
-
Control, Programmed BCX
Part No. PD54127
$1,400.96- Programmed controller
- Two digital readouts
- tome and temperature
- Two potentiometers
- Units with Manual controls after 09/15/2010
- Used on various Blodgett models such as BCX-14, BCX-14G, BX-14, CNVX-14 where part is applicable.
-
CONTROL, UHC BACK MEMBRANE
Part No. PD32223
$215.06- Back Membrane Control
- Commonly used on Blodgett models such as 1016BVM, U.H.C., UHC-MCD and where part is applicable
-
CONTROL, UHC FRONT MEMBRANE
Part No. PD32222
$228.33- Front Membrane Control
- Commonly used on Blodgett models such as 1016BVM, U.H.C., UHC-MCD and where part is applicable
-
-
Controller Assembly, IQ2
Part No. PD61930
$2,793.88- IQ2 Controller Assembly
- Includes Panel & Decal
- Commonly used on Blodgett models such as CTB, CTB POPEYES, CTB1, CTBR, CTBR POPEYES and where part is applicable
- FOR UNITS BEFORE 06/14/2007
-
CONTROLLER, DIGITAL- SOLID STATE
Part No. PD128207
$1,061.12- Digital Temp Controller
- Solid State
- 120/240VAC
- 1PH
- 50/60HZ
- 150-500 degrees F
- Commonly used on Blodgett models such as: AC-500, AC-500 XCEL, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-100 XCEL, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 200E, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.
-
CONTROLLER, HI-LOW LIMIT W/LIT
Part No. PD140360
$1,095.65- Control Board
- Hi-Low Limit
- With Light
- Used on various Blodgett models such as MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE and where part is applicable.
-
CONTROLLER, TEMPERATURE, w/LIT
Part No. PD128140
$373.47- Temp Controller
- Solid State
- 3" x 2-1/2" x 1-3/4"
- 200-500 degrees F
- Commonly used on Blodgett models such as BDO-100G-ES, BDO-G, COS-20G, DFG-100, DFG-200, Mark V, Mark V KFC, Mark V Series, Mark V-100, Mark V-200, SHI-E, SHI-G, SHO-E, SHO-G, SHO-100E, SHO-100G, ST-300 AA, ST-300 AB, Zephaire 240E Plus, Zephaire 240G Plus, Zephaire 50E, Zephaire E, Zephaire G, Zephaire G Plus, Zephaire 100E, Zephaire 100G, Zephaire 200E, Zephaire 200G and where part is applicable.
- Oven ST-300, Zephaire 50E, Zephaire E & G with solid state control.
-
COVER ASSY, CONTROL
Part No. PD172265
$575.25- Control Cover Assembly
- Commonly used on Blodgett models such as MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 & where part is applicable
-
COVER ASSY, CONTROL BP100
Part No. PD172266
$141.60- Control Cover Assembly
- Commonly used on Blodgett model BP-100, BP-50 where part is applicable.
-
COVER, CONTROL
Part No. PD172284
$478.79- Control cover
- Commonly Used on various Blodgett models such as: AC-500 and where part is applicable.
-
COVER, CONTROL AC500
Part No. PD172311
$304.44- Control Cover
- Commonly used on various BLODGETT models such as: AC-500 XCEL and where part is applicable.
-
COVER, LAMP INTERIOR S/S
Part No. PD172297
$38.20- Cover, Lamp Interior S/S
- Commonly used on Blodgett models such as DFG-100, DFG-200 and where part is applicable.
-
CTRL PNL & DECAL ASSY W/LTS
Part No. PD172334
$1,069.08- Control panel with lights
- Stainless Steel
- Used on various Blodgett models such as ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable
-
CTRL PNL & DECAL ASSY W/O LTS
Part No. PD172335
$841.64- Stainless Steel
- Control panel without lights
- Used on various Blodgett models such as ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable
-
CTRL PNL & DECAL ASSY W/O LTS
Part No. PD172336
$794.73- Control panel without lights
- Stainless steel
- Commonly used on various Blodgett models such as ZEPHAIRE E, ZEPHAIRE E PLUS, ZEPHAIRE 200E and where part is applicable
-
DECAL OVERLAY
Part No. PD52115
$87.54- Decal
- 3 ST PT
- Commonly used on various BLODGETT models such as: DFG-50 and where part is applicable.
-
DECAL, CONTROL (1 SPEED) DFG50
Part No. PD172389
$1,052.27- Control Decal
- 1 speed
- Commonly used on Blodgett models such as DFG50 and where part is applicable
-
DECAL, CONTROL 3STPT
Part No. PD172393
$360.20- Commonly Used on various BLODGETT models such as: CTB, CTB SERIES, CTB-AP, CTB1, CTBR-AP and where part is applicable.
-
DECAL, CONTROL PANEL- COOK/HOLD
Part No. PD128180
$523.92- Control Panel Decal (Cook & Hold)
- Commonly used on various BLODGETT models such as: CTB (After 9/86), CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP and where part is applicable.
-
DECAL, CONTROL W/O MP, 20
Part No. PD172388
$315.77- Control Decal
- W/O MP
- 20
- Commonly used on Blodgett models where part is applicable.
-
DECAL, LEXAN
Part No. PD38613
$1,453.17- Lexan Deal
- Used for 5 Position Selector Switch & Push Button Controls
- Commonly used on Blodgett models such as COS-6, COS-8E, COS-8EDS, COS-8GDS and where part is applicable
-
DECAL, LEXAN CNTRL ZEPHAIRE-G
Part No. PD172429
$201.78- Commonly used on various BLODGETT models such as: ZEPHAIRE G and where part is applicable.
-
DECAL, LEXAN CNTRL ZEPHAIRE-G
Part No. PD172430
$1,069.08- Control Decal
- Lexan
- Commonly used on Blodgett models such as Zephaire G and where part is applicable
-
DECAL, LEXAN CONTROL
Part No. PD50065
$262.85- Lexan Control Decal
- Commonly used on Blodgett models such as KCO-25E, and where part is applicable
-
DELAY RELAY CONVERSION KIT IID-3, LP
Part No. PD44921
$5,912.69- Conversion Kit IID-3, Propane
- Commonly used on various Blodgett models such as DFG-100, DFG-200 and where part is applicable.
-
DIRECT SPARK IGNITION
Part No. PD44476
$405.33- Ignition Circuit Board
- Commonly used on various Blodgett models such as AC-500 XCEL, DFG-100 XCEL, SHO-G, SHO-100G, XR8E, XR8G and where part is applicable.
-
DISPLAY, TEMPERATURE COS 101/201/20
Part No. PD172505
$1,987.31- Temperature Display
- Commonly used on various BLODGETT models such as: COS-101, COS-101NSF, COS-101SNSF, COS-201NSF, COS-20, COS-20NSF and where part is applicable.
-
HANDLE, CONTROL PANEL
Part No. PD173550
$38.66- Control Panel Handle
- Commonly used on various BLODGETT models such as: COS-5H, COS-5HA, COS-5HB and where part is applicable.
-
Harness, Conduit Rigid 2 SP
Part No. PD51852
$77.00- Harness, rear connecting 2 SP
- Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.
-
Harness, Ribbon Cable
Part No. PD36542.1
$274.35- Ribbon Cable Harness
- Commonly used on various BLODGETT models such as: 1016BVM, U.H.C., UHC-MCD and where part is applicable.
-
-
HARNESS,INTERCONNECTING
Part No. PD31825
$288.12- 9 Pin Harness
- Used on Various Blodgett Models Such As MT1828E, MT1828G
-
INTELLIHOLD CONTROL KIT, IQ2
Part No. PD33564.1
$7,674.98- Conversion IQ2 kit into DFG-100, DFG-200
- 2 speed
- We must verify your serial number and voltage to confirm retro fit.
- Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.
- If ordered without serial number, item cannot be returned.
-
IQ CONTROL, RCNDT 34968 KFC
Part No. PD174009
$3,479.22- Commonly used on various BLODGETT models such as: CTB, CTB-AP, CTB SERIES, CTB1, CTBR-AP, MARK V, MARK V KFC, MARK V SERIES and where part is applicable.
-
KIT IQ2 INTO CTB 2SB BK
Part No. PD174038
$6,029.51- IQ2 Conversion Kit
- Intellitouch
- 2 speed
- 1 or 3 phase
- 5 & 7.5 KW
- Commonly used on various BLODGETT models for Burger King such as: CTB, CTB SERIES, CTB1, CTBR and where part is applicable.
-
KIT IQ2 INTO CTB 60AMP BK
Part No. PD174036
$6,349.90- IQ2 Conversion Kit
- (from Intellitouch, Burger King only)
- 1SP
- 1PH
- 60A
- BK
- 7.5KW
- Commonly used on various BLODGETT models such as: CTB, CTB SERIES, CTB1, CTBR and where part is applicable.
-
KIT MODULE REPLACE, MK111H
Part No. PD174041
$4,184.28- Module Kit Replacement
- Commonly used on various BLODGETT models such as: MARK V-III, MARK V-IIIH, MARK V-IIIHD and where part is applicable.
-
KIT, BLODGETT COMPUTER & DRIVE
Part No. PD134009
$3,740.23- Commonly used on models: MT32, MT3270, MT3870
-
Kit, Control Display Board
Part No. PD32224
$841.64- Control Display Board Kit
- Commonly used on various Blodgett models such as 1016BVM, Core Bundle, U.H.C., UHC-MCD and where part is applicable
-
KIT, CONTROL PROGRAMED FRESH MARKET
Part No. PD841006
$2,768.17- Blodgett KIT,CTRL PRGMD FRESH MKT, PD841006
-
KIT, INF Control with Digital Timer
Part No. PD53646
$414.18- Digital Timer and infinite kit
- Commonly used on various BLODGETT models such as: DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.
-
Kit, Inverter Drive
Part No. PD175552
$919.00Use for models: BCX-14, BCX-14E, BCX-14G, BX-14, CNVX-14, CNVX-14E, CNVX-14G -
KIT, INVERTER DRIVE YASKAWA
Part No. PD840710
$1,758.53- Inverter Drive Kit
- Replaces Old Purple Box
- Commonly used on various Blodgett models such as BCX-14, BCX-14E, BX-14, BX-14E, CNVX-14, CNVX-14E and where part is applicable.
-
KIT, MENUSELECT XR8G
Part No. PD47052
$2,334.63- Menu Select Controller Kit
- Commonly used on Blodgett models such as XR8E, XR8G and where part is applicable.
-
KIT, MK111 CONTACTOR UPGRADE
Part No. PD174143
$722.16- Commonly used on various BLODGETT models such as: BC14E, CNV-14E, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD and where part is applicable.
-
KIT, RELAY HARNESS & JACK SCREW
Part No. PD31826
$476.96- Used on Various Blodgett Models Such As MT1828E, MT1828G
-
KIT, SVC XR8G 1K PROBE
Part No. PD174181
$146.91- Probe
- Used on various Blodgett model such as XR8E, XR8G and where part is applicable