Toasters
-
Aluminum Transfer Plate
Part No. PD37989
$92.24- Aluminum Transfer Plate
- Commonly used on Apw models such a : M-95, M-95-2, M-95-2-CD-CHI, M-95-2-CD-CHI US, M-95-3, M-95-3-WD and where part is applicable.
-
Axial Fan - 240V
Part No. PD41345
$136.10- Axial Fan
- 230 V AC
- 50-60Hz
- 10W
- 3000 RPM
- 29 CFM
- 2 13/16" centers
- Clockwise rotation
- Wire leads
- Used on various APW Wyott models such as M-95, M95-2-JIB, M952L-W, VCG, VSX-10, VSX-20, XTRM-2, XTRM-3 and only where part is applicable.
-
-
-
BEARING, CLIP
Part No. PD61408
$11.13- Clip Bearing
- 1-1/2" x 3/4"
- Commonly used on APW models such as: XTRM-1, XTRM-2 3 INCH, XTRM-3 3 INCH,XTRM-3H and where part is applicable
-
BEARING, FLANGED POLYMER
Part No. PD61410
$28.24- Bearing Flanged Polymer
- 1/2" x 5/8"
- Commonly used on APW models such as: AT EXPRESS, FT 1000, FT 1000H, FT 800, FT 800H, XPRS, XTRM-1, XTRM-2, XTRM-2 3 INCH, XTRM-3, XTRM-3 3 INCH, XTRM-3H, XWAV-1422, XWAV-1422EZ, XWAV-1829, XWAV-1829EZ and where part is applicable.
-
BEARING, SHAFT
Part No. PD127806
$32.70- Shaft Bearing
- (most models use 4-6 each)
- 29/32" OD
- 3/8" ID
- ZINC
- Used on various APW models such as: AT EXPRESS, AT-10, AT-30, AT-5, BG-1S, BG-1T, BT-15,
CG-30, ST-1, BT-15, FLEXWAV-1422 EZ, FLEXWAV-1422 EZ SS, FLEXWAV-1829 EZ, FLEXWAV-1829 EZ SS, FT 1000, FT 1000H, FT 800, FT 800H, XPRS, XTRM-1, XTRM-2, XTRM-2 3 INCH, XTRM-3, XTRM-3 3" and where part is applicable. - Series C-20, C-40, RB-33, RT-2
-
BELT, CONVEYOR
Part No. PD128044
$293.57- Conveyor Belt - 79 Links
- 10" W X 30 " L
- Use for AT5, AT10, BT15 Toasters
-
Belt, Conveyor 10" x 30-1/2", APW PS0021
Part No. PD66100
$268.99- Conveyor Belt
- 10"w x 30-1/2"L
- 68 Links
- Commonly used on various APWyott models such as FT 800, FT 800H and where part is applicable.
-
Belt, Wire 27 x 0.050 3 Segment 61 Links
Part No. PD50603
$138.57- 27" Length
- Approx width 10"
- 3 Segment
- 61 Link
- Use on various APW models such as: XTRM-2 and where part is applicable
-
Blade, Fan
Part No. PD53268
$41.15- Cooling fan found on the back of drive motor
- 4 petal
- White
- Diameter 2-5/8"
- CW
- 1/8 Shaft
- Used on various APW models such as M-83, M-91, M2000
-
-
-
Butter Roll Cyclinder
Part No. PD33104
$99.54- Butter Roll Cylinder
- 10-5/8"L
- 4-1/2" OD
- Stainless Steel
- Commonly used on APWyott models such as M-2000, M-83, M-91, M-95-2, M-95-2-CD-CHI, M-95-3, M2000, M952L-W and where part is applicable
-
Butter Roll Drive Bushing
Part No. PD11905
$51.78- Butter Roll Drive Bushing
- 3/4" DIA X 1" LONG (NO SET SCREW)
- MATERIAL: Steel
- PLATING: Chrome-Plated
- INCLUDES: 3/32" Allen Screw
- Commonly used on Apw models such a : AT/BT SERIES, M SERIES, M-2000, M-78, M-83, M-88E, M-91, M-95, M-95-2, M-95-3, M-95-2-CD-CHI, M-95-2-CD-CHI US, M-95-3, M2000, M952L-W and where part is applicable.
-
Butter Roll Motor 120V
Part No. PD11924
$183.80- Butter roll Motor
- 120V
- 25RPM
- 5/16" drive shaft
- 3 x 2-3/4" gearbox
- 2-5/8" fan diameter
- 3/16" hole
- W/Gear box & fan
- Commonly used on APW models: M78, M83, M88W, M95
-
Butter Roll Shaft, 15-1/4"L
Part No. PD97491
$221.82- Butter Roll Shaft
- 15-1/4"L
- Commonly used on APW models such as M2000, M-95-2, M-95-2-CD-CHI and where part is applicable
-
Butter Roller Shaft, 17-3/4"L
Part No. PD230281
$220.07- Butter Roller Shaft
- 17-3/4"L
- Commonly used on APWyott models such as M-83, M-95-2-CD-CHI, M-95-3, and where part is applicable
-
Ceramic Element, 208v, 350w
Part No. PD61921
$139.83- Ceramic Element
- 208v
- 350w
- Commonly used on APWyott models such as FLEXWAV-1422 EZ, FLEXWAV-1422 EZ SS, FLEXWAV-1829 EZ, FLEXWAV-1829 EZ SS, XWAV-1422, XWAV-1422EZ, XWAV-1829, XWAV-1829EZ and where part is applicable
-
CHAIN, 1/4" DRIVE 65 PITCH
Part No. PD35408
$69.30- Chain
- 1/4 drive
- 65 pitch
- Use on various APWyott models such as: AT EXPRESS, FT 1000, FT 1000H, FT 800, FT 800H and where part is applicable.
-
CONVEYOR BELT 3 SEGMENTS
Part No. PD37535
$172.74- Conveyor Belt 3 Segments
- Commonly used on Apw models such a : AT-10, AT-5, BT-15, Core Bundle and where part is applicable.
-
CONVEYOR BELT, 79"
Part No. PD11912
$334.04- Conveyor Belt
- 79 links
- Metal
- Commonly used on APW models such as AT-30, XTRM-3, XTRM-3 3" and where part is applicable.
-
Dial 0-9, 1-1/8, Round
Part No. PD126957
$27.90- Dial
- 0-9 With Set Screw
- Color/Material Black Plastic & Aluminum
- Original Application Speed Control, Toaster
- 1-1/8" Diameter
- Mount Size Type 1/4" Diameter Hole
-
DRAWER, TOAST FOR AT EXPRESS and FT's
Part No. PD41833
$36.62- Toast Drawer
- (B)
- Used on various APW models such as AT Express, FT 1000, FT 1000H, FT 800, FT 800H, XPRS where part is applicable.
-
-
DRIVE CHAIN 67 LINKS
Part No. PD35286.1
$48.11- Chain
- 1/4" drive
- 67 pitch
- Used on various APW models such as: AT-10, AT-30, AT-5, BT-15, XPRS, XTRM-2 3 INCH, XTRM-3, XTRM-3 3" and where part is applicable
-
DRIVE MOTOR
Part No. PD397571
$318.45- Conveyor motor
- 208/240 V AC
- 60HZ
- 4.6 RPM
- .45 AMP
- 4 3/4" Length
- 2 3/4" Width
- 1/4" Push on Terminals
- Commonly used on APWyott models such as M-2000, M-95, M952L-W, apw_wyott_M2000 and only where part is applicable.
-
Drive Shaft Assembly
Part No. PD45941
$114.95- Drive Shaft Assembly
- AT-10 Segmented Belt
- Commonly used APW models such as AT EXPRESS, AT-10, AT-5, FT 1000, FT 1000H, FT 800, FT 800H, XPRS, XTRM-1, XTRM-2, XTRM-2 3" and where part is applicable.
-
ELEMENT 208V 2760W, Toaster
Part No. PD30371
$106.76- Toaster Element
- 2760W
- 208V
- 1PH
- Flag terminals
- 12-1/4" x 15"
- Use on various APW models such as: M95, M-95-2, M-95-3, M-95-3-WD and where part is applicable
-
Element 240V
Part No. PD51999
$106.20- 240V
- 2760W
- Used on Various APW Models Such AS: M-95-2, M-95-3, M-95-3-WD
- and where part is applicable
-
-
ELEMENT, 120V, 832W
Part No. PD37248
$96.54- Upper or lower element
- 4-1/2" x 11-1/4"
- 120 Volt
- 832 Watt
- Use on APW models such as: AT Express, XPRS and where part is applicable
-
ELEMENT, 208V
Part No. PD61023
$53.78- Element
- 208 Volt
- 832 Watt
- Length is 11-3/8"
- Commonly used on various APW models such as: XPRS, XTRM-1 and where part is applicable
-
ELEMENT, 208V 11 x 5-3/4"
Part No. PD33072.3
$72.96- ELEMENT, M Style
- 208V
- 1400 W
- 10-3/8" x 6-1/4"
- Flag terminals
- Commonly used on models: AT-10, AT-5, AT-200, BT-15, Core Bundle and where part is applicable.
-
ELEMENT, 208V 1400W. 'M'
Part No. PD29903
$120.27- "M"shaped element
- 208V
- 1400W
- 6-3/8 x 11-1/4
- Terminals flagged shaped w/screws
- Use on various APW Models such as: FT 800, FT 800H, XTRM-2, XTRM-2 3" and where part is applicable
-
ELEMENT, 240V
Part No. PD36473.3
$92.36- Toaster element
- 240 Volt
- 1650 watt
- Flag terminals with screws
- Commonly used on APW models: AT30
-
Element, 240V 1650W
Part No. PD54982
$47.72- Element
- 240V
- 1650W
- Commonly used on APWyott models such as XTRM-3 and where part is applicable
-
ELEMENT, HEATING 240V 1400W
Part No. PD35464
$120.27- Toaster Heating Element
- 240V
- 1400W
- 10-1/2 x 16-3/4"
- M shaped
- Flag screw terminals
- Used on various APW Wyott models such as FT 800, FT 800H, XTRM-2, XTRM-2 3", FT series where part is applicable.
-
Element, Toaster
Part No. PD51703
$141.20- 240V
- 1625 Watts
- Commonly Used on APW Models: FT 1000, FT 1000H
-
ELEMENT, Xtrm-2
Part No. PD135665
$64.10- Heating Element
- 1400W
- 208V
- Use for models Xtrm2 and where part is applicable.
-
Fan Blade , 2-5/8 Diameter
Part No. PD11923
$19.76- Fan Blade
- CCW rotation
- Conveyor Motor Cooling Fan
- 2-5/8" W/3/16" Hole
- Commonly used on various APW models such as AT/BT Series, M Series, M-83, M-91, M952L-W and where part is applicable.
-
FAN FOR W-312 & W-313
Part No. PD128019
$16.04- Fan (For PD128250 & PD128251)
- Use for K-1000B, M-55A, M-78, M-83, M-83D, M-88E, M-88ED, M-88W, M-88WD, M-91, M-95 (Except Arbys Units)
-
Fan Motor 208-240V prior to 1993
Part No. PD167284
$171.57- Fan Motor
- 208-240V
- Used on model AT-10 prior to July 1993
- Limited supply available.
-
Fan, Axial, 220-240V
Part No. PD26168.3
$151.94- Axial Fan
- 230V
- 4-11/16" X 1-1/2" x 4-1/8"
- 15W
- 3100 RPM
- Commonly used on on APW Wyott models such as: AT-10, AT-30, AT-5, BT-15, FLEXWAV-1422 EZ, FLEXWAV-1422 EZ SS, FLEXWAV-1829 EZ, FLEXWAV-1829 EZ SS, FT 1000, FT 1000H, FT 800, FT 800H, M-2000, M2000, M2000-JIB, XTRM-2, XTRM-2 3 INCH, XTRM-3, XTRM-3 3 INCH, XWAV-1417A, XWAV-1422, XWAV-1422EZ, XWAV-1829, XWAV-1829EZ and where part is applicable.
-
FAN, CIRCULATION 115V 60Hz, 110 CFM
Part No. PD25679
$95.45- 4-11/16" x 1-1/2"
- 120V
- 102 CFM
- 2900 RPM
- Commonly used on Hatco models TQ-10, TQ-400, TQ-400BA and APW models AT EXPRESS, XPRS and various other manufacturer models.
-
Fan, Cooling - 115V, 110 CFM
Part No. PD124274
$133.97- Axial Fan
- 115V
- 102 CFM
- 2900 RPM
- 4-11/16 x 1-1/2"
- Use for APW models: AT-10 After July 1993, AT EXPRESS, AT-10, AT-30, AT-5, XPRS
-
-
Fuse Holder
Part No. PDG10006
$68.01- Fuse up to 300V
- 15A
- For 13/32" x 1-5/16" Fuse
- 1/4" Tabs
- Used on various APW models such as BT-15, FDB-18, FDB-24, FDB-30, FDB-36, FDB-42, FDB-48, FDB-54, FDB-60, FDB-66, FDB-72, FDDB18, FDDB24, FDDB30, FDDB36, FDDB42, FDDB48, FDDB54, FDDB60, FDDB66, FDDB72, FDDLB-18, FDDLB-24, FDDLB-30, FDDLB-36, FDDLB-42, FDDLB-48, FDDLB-54, FDDLB-60, FDDLB-66, FDDLB-72, FDLB-18, FDLB-24, FDLB-30, FDLB-36, FDLB-42, FDLB-48, FDLB-54, FDLB-60, FDLB-66, FDLB-72, M-78 where part is applicable
-
Fuse SC-20 600V
Part No. PDG10007
$19.95- Fuse
- SC-20
- 600V
- 20A
- Time lag
- 13/32 x 1-5/16"
- Used on various APW models such as M-78 where part is applicable
-
-
Gear, Conveyor 19 tooth
Part No. PD53561
$143.39- 3/8 Bore
- Used on various APW models such as M-83, M-95-2, M-95-3, M-95-3 (Wendy's), M-95-3-WD, M2000-JIB, M95-2-JIB
-
Gear, Motor 13 Tooth, 1/2 in. bore
Part No. PD40789
$323.45- Gear
- 13 tooth
- 1/2" Bore
- Commonly used on APW models such as AT/BT Series, M Series, M-83, M-95, M-95-2, M-95-2-CD-CHI, M-95-2-CD-CHI US, M-95-3, M-95-3-WD and where part is applicable.
-
Grill Plate
Part No. PD41739
$282.92- Grill Plate
- Commonly used on Apw models such a : AT/BT SERIES, M SERIES, M-83 and where part is applicable.
-
Hanger Arm Right Side
Part No. PD54000
$166.19- Conveyor Hanger
- Right Side
- Stainless steel
- Used on various APW models such as M-83, M-95, M-95-2, M-95-2-CD-CHI, M-95-2-CD-CHI US, M-95-3, M-95-3-WD, M95-2-JIB, M952L-W and where part is applicable
-
IDLER BEARING
Part No. PD11926
$91.34- Idler Bering
- LENGTH: 1 1/4", 32 mm
- OUTER DIAMETER: 3/4", 19 mm
- INCLUDES: 3/8" OD SPRING
- Commonly used on Apw models such a : AT/BT SERIES, M SERIES, M-78, M-83, M-91 and where part is applicable.
-
Infinite Control 280V 13A
Part No. PD51486
$57.84- Infinite Control Switch
- 208V
- 13A
- Flat down
- Raised base
- 7/8" long shaft
- D-stem .187
- (Pilot terminal now relocated, labeled P2)
- (Dial not included, see other offers here)
- Use on various APW models such as AT, FT, BT, XTRM-2, XTRM-2, XTRM-3, XTRM-2 INCH, XTRM-3, XTRM-3 3 inch, XWAV-1417A, and where part is applicable
-
Infinite Switch, 120V
Part No. PD45684
$67.55- Old Style Infinite Switch
- Standard Duty
- 5 Terminal may be black or beige.
- 120V
- Used on various APW models such as AT-10, CHP-1A, CP-1A, CP-2A, HFW-23, HFW-23D, PW-1C, W-1, W-2, W-3, W-4, W-43V, W4-2 and where part is applicable.
-
INFINITE SWITCH, 208V
Part No. PD32559
$64.56- Infinite Control
- 13A
- 208V
- EGO
- Use on various APW models such as FD18, FD24, FD30, FD36, FD42, FD48, FD54, FD60, FD66, FD72, FD84, FD96, FDD18, FDD24, FDD30, FDD36, FDD42, FDD48, FDD54, FDD60, FDD66, FDD72, FDD84, FDD96, FDDL18, FDDL24, FDDL30, FDDL36, FDDL42, FDDL54, FDDL60, FDDL66, FDDL72, FDDL84, FDDL96, FDL18, FDL24, FDL30, FDL36, FDL42, FDL48, FDL54, FDL60, FDL66, FDL72, FDL84, FDL96, SM-50-17P, and where part is applicable
-
Infinite Switch, HD, 120V
Part No. PD43697
$89.00- Infinite Switch
- 120V
- Has 6 spade terminals
- Used on various APW model such as AT-10, DR-1A, DR-2A, DS-1A, FD18, FD24, FD30, FD36, FD42, FD48, FD54, FD60, FD66, FD72, FD84, FD96, FDD18, FDD24, FDD30, FDD36, FDD42, FDD48, FDD54, FDD60, FDD66, FDD72, FDD84, FDD96, FDDL18, FDDL24, FDDL30, FDDL36, FDDL42, FDDL54, FDDL60, FDDL66, FDDL72, FDDL84, FDDL96, FDL18, FDL24, FDL30, FDL36, FDL42, FDL48, FDL54, FDL60, FDL66, FDL72, FDL84, FDL96, SM-50-11, SM-50-11D, SM-50-4, SM-50-4D, SM-50-7, SM-50-7D, W-3V, W-3V-CHI, W-3Vi, WU-3i and where part is applicable.
-
Knob
Part No. PDG10004
$26.24- Knob (For PD128146 & PD128188)
- Speed Control Knob
- Mount 1/4" Round
- 1-1/8" D
- Set Screw Down
- Used for various APW Models Such As AT EXPRESS, AT-10, AT-30, AT-5, BT-15, DWC13-N, XTRM-2, XTRM-2 3 INCH, XTRM-3, XTRM-3 3 INCH and where part is applicable
-
-
Knob - Thermostat with Indicator
Part No. PDG10002
$51.63- Knob - Thermostat with Indicator
- Use for M-88W, M-88WD
-
Knob 200-550 F
Part No. PD40376
$23.90- 500 degree F thermostat knob
- Used on toasters and ovens where part is applicable
- Commonly used on APW models: M-91, M-95-2, M-95-3, M-95-3-WD, M952L-W
-
Knob, Dial
Part No. PD11950
$18.38- Dial
- Black plastic
- 1/4" round mount
- Set screw down
- 1-1/2 diameter
- Commonly used on APW toaster models such as: AT-10, AT-30, AT-5, BT-15, FT 1000, FT 1000H, FT 800, FT 800H, M-2000, M2000, M2000-JIB, M95-2-JIB, XPRS, XTRM-1, XTRM-2, XTRM-2 3 INCH, XTRM-3, XTRM-3 3 INCH, XWAV-1417A, XWAV-1422, XWAV-1422EZ, XWAV-1829, XWAV-1829EZ and where part is applicable.
-
Label, Control Panel
Part No. PD53559
$30.98- Control panel label
- Used on various APW models such as where part is applicable
-
LEG
Part No. PD29563
$17.05- Leg
- Chrome
- Plastic
- Stud 1/4-20
- Round
- Adjustable 1" to 1-1/2"
- General use
- Used on various APW models such as AT-5, AT-10, AT-30, AT-200, AT Express, AT EXPRESS, BT-15, CHP-1A, FT 1000, FT 1000H, FT 800, FT 800H, VCG, XPRS, XTRM-2, XTRM-2 3 INCH, XTRM-3, XTRM-3 3 INCH
-
Leg, 1-1/2" Black
Part No. PD61386
$8.35- Leg
- 1-1/2"
- Black
- Commonly used on APW models such as: AT-10, AT-30, AT-5, BT-15 and where part is applicable.
-
Leg, Adjustable - Chrome
Part No. PD11943
$38.10- Adjustable Appliance Leg
- Mounting Type 3/8-16 Stud
- Height 4"-5-3/4"
- 1-3/4"
- 5/8"
- Foot Type Flange
- Leg Material Thermoplastic
- Lag Finish Chrome
- Use for models K-1000B, M-78, M-83, M-83D, M-88E, M-88ED, M-88W, M-88WD and where part is applicable.
-
-
LINK, MASTER - CONVEYOR BELT
Part No. PD128045
$33.40- Master Link (For PD128044)
- Use for AT-10 Toasters
-
Lower Back Panel
Part No. PD36474.1
$44.70- Lower Back Panel
- Commonly used on Apw models such a : AT-30 and where part is applicable.
-
MOTOR - CONVEYOR 240V
Part No. PD31175
$240.02- Gear motor for toasters
- 230V
- 60HZ
- 24 AMP
- 3/16" SHAFT
- 2 WIRE LEADS
- 4 MOUNT HOLES #10-24 THREADS
- 2.38" MOUNT CENTERS
- 9RPM BT-15
- Comes with fan blade
- Commonly used on APWyott models such as BT-15, BT15C, BT15C-2, BT15C-3, BT15E, BT15E-2, BT15E-3, BT15F, BT15F-2, BT15F-3, ECO-4000-500E, ECO-4000-500L, FT 1000, FT 1000H, FT 800, FT 800H, FT-1000, FT-1000H, FT-800, FT-800H, QST-500L and only where part is applicable.
-
MOTOR DRIVE GEAR, 19 TOOTH
Part No. PD11919
$82.25- 1/2" Hole
- 1-5/16" Diameter
- Used on various APW Models Such As M-83, M-91, M-95-2, M-95-3, M-95-3-WD, M2000, K1000 and where part is applicable
-
MOTOR, BUTTER ROLL
Part No. PD28944
$275.78- BUTTER ROLL MOTOR
- 25 RPM
- 208/240V
- 60HZ
- RED & BLACK FOR 208V
- ORANGE & BLACK FOR 240V
- Commonly used on APW models such as AT/BT Series, M Series, M-2000, M-95, M952L-W, apw_wyott_M2000 and only where part is applicable.
-
MOTOR, CONVEYOR With FAN
Part No. PD230283
$326.28- Conveyor Motor
- 208/240 V AC
- 1/2" Diameter Drive Shaft
- Fan Shaft .20" Diameter
- Cooling fan 2-1/2" Diameter
- With.20" Hole
- Wire Red & Black for 208V
- Orange & Black for 240V, old
- Used on various APW models such as AT/BT Series, M Series, M-83, M-95, M-95-2, M-95-2-CD-CHI, M-95-3, M-95-3-WD and only where part is applicable.
-
MOTOR, DRIVE - 115V
Part No. PD128147
$262.41- Drive Motor
- 115V
- With Fan Blade
- Use on various APW models such as: AT-5, AT-10, AT-30, AT Express, XPRS, XTRM-1 and where part is applicable
-
Motor, Drive 208/240v
Part No. PD11922
$255.30- 208/240 volts
- 5/16 drive shaft
- Used on Various APW Models Such as XPRS, XTRM-2, XTRM-2 3 Inch, XTRM-3, XTRM-3 3 Inch , AT Series; AT10, AT30, AT200
-
MOTOR-GEAR BOX W/FAN
Part No. PD128251
$326.81- Motor (For Conveyor Drive)
- w/Gear Box & Fan
- 120V
- Fan shaft 5/8" long x .20 diameter
- Drive Shaft 1/2" diameter
- Gearbox 4-3/4 x 2-3/4"
- Use for APW models such as K-1000B, M-55A, M-78, M-83, M-83D, M-88E, M-88ED, M-88W, M-88WD, M-95, M-95-2, M-95-3, M-95-3-WD and where part is applicable.
-
NYLON BEARING
Part No. PD11906
$22.10- Nylon Bearing
- OUTER DIAMETER: 7/8", 22 mm
- INNER DIAMETER: 5/8", 16 mm
- MATERIAL: Nylon
- THICKNESS: 3/16", 5 mm
- Commonly used on Apw models such a : AT/BT SERIES, M SERIES, M-78, M-83, M-88E, M-88W, M-91, M-95, M-95-2, M-95-2-CD-CHI, M-95-2-CD-CHI US, M-95-3 and where part is applicable.
-
On/Off Rocker - Amber Lighted Stand By
Part No. PD30567.1
$36.48- On/Off Rocker
- Amber Lighted Stand By
- Fits 9/16 x 1-1/8 hole
- SPST
- 3 terminals
- 1/4" spade terminals
- 10A/250V, 16A/125V
- Use for Auto Bun, AT-10, AT-30, K-1000B, M-78, M-83, M-83D, M-88E, M-88ED, M-88W, M-88WD, M-91, M95-2 where part is applicable.