Find ANETS GoldenFRY™ Fryer and other model replacement and repair parts here.

Items 1 to 80 of 103

Page:
  1. 1
  2. 2

Set Descending Direction
per page
  1. 700 Gas Safety - 120 VAC

    Part No. PD19030

    $823.10
    • 700 Gas Safety - 120 VAC
    • Natural Gas
    • 3/4"
    • 1/4" CCT Pilot Out
    • Used on various Anets models such as GPC14, MX14E models AA, D, E where part is applicable.
  2. Adapter - Hi-Limit

    Part No. PDG11272

    $46.31
    • Adapter - Hi-Limit
  3. ADAPTER, PG9

    Part No. PD46913

    $20.57
    • PG9 Adapter
    • Slips over thermopile
    • Converts it to PG9
    • 750 MV milivolt pilot generator
    • Brass
  4. Assembly, Burner

    Part No. PD61704

    $130.41
    • Burner Assembly
    • Commonly used on Anets models such as SLG40 and where part is applicable
  5. BAFFLE, WLDMT SLG40/50

    Part No. PD42705

    $157.82
    • This is a made to order item only
    • Used on various Anets models such as: 14VES and where part is applicable.
  6. Basket Support Rack

    Part No. PDG10065

    $93.60
    • Basket Support Rack
    • 13-1/2" x 13-1/2"
    • Nickel plated
    • Commonly used on Anets models and only where part is applicable.
  7. BASKET, FRY, FULL SIZE

    Part No. PD126549

    $77.97
    • Fryer Basket
    • 16-3/4" Length
    • 17-1/2" Width
    • 6" Height
    • 2 Handels
    • Placement of Hook Front
    • Nickel Plated
    • Type Full
    • Used on various Anets models such as 18X1, 18X1(D,E,EG),18EG and only where part is applicable.
  8. Baso Safety, Millivolt

    Part No. PDG10058

    $177.96
    • Gas Safety Valve
    • 1/2 PSI
    • Width 4-1/4"
    • Millivolt
    • 122,000 BTU
    • 1/4" CCT Pilot In / Out
    • 3/8" NPT Gas In / Out
    • Manual Shut-Off Valve
    • Works With Natural Gas Or Liquid Propane
    • Commonly used on various Anets models and only where part is applicable.
  9. BOTTOM HINGE WELDMENT

    Part No. PD39972

    $217.35
    • Commony use on Anets models: 14VFS
  10. BURNER, JET

    Part No. PD31717

    $31.50
    • Jet Burner
    • LP Gas
    • Commonly used on Anets models such as MX-14E and where applicable
  11. Carling Switch

    Part No. PD19036

    $170.10
    • Carling Switch
    • Seat, Melt/Fryer
    • Commonly used on Anets models DI-11-17 E-11-17 SX-14 (AA E) and where part is applicable.
  12. COMBO VALVE (NAT GAS, 3/4")

    Part No. PD230172

    $405.41
    • Natural Gas Valve
    • 300,000 BTU
    • 120 VAC actuator
    • Black and white wire leads
    • ECO slotted thermopile magnet
    • 3/4" in & out
    • 3/4 x 1/2" reducer bushings
    • Has ECO slot for thermocouple
    • Used on Anets model such as MX14E and where part is applicable.
  13. CONTROL, SPARK IGINITOR ELECTRONIC

    Part No. PD44030

    $60.64
    CONTROL, SPARK IGINITOR ELECTRONIC
  14. CONTROL, WIRE 24 SPARK IGNITER

    Part No. PD47781

    $31.50
    • Spark Igniter Wire
    • Connects to Igniter
    • Used on various Anets models where part is applicable.
  15. CONVERSION KIT, NATURAL TO LP

    Part No. PD51872

    $247.30
    • Conversion Kit
    • Natural to LP
    • M/V
    • Commonly used on Anets model SLG40  where part is applicable.
  16. CONVERSION KIT, REGULATOR LP TO NAT

    Part No. PD53524

    $215.46
    • Pressure Regulator Kit
    • Gas Conversion
    • LP to Natural gas
    • 3.5" W.C
    • Kit provides straight-line regulation and includes all the necessary parts including instructions to convert a specific factory model gas valve.
    • Use with Robertshaw valves such as 7000, 7010, 7100, 7200 and 7222.
    • Use with Robertshaw 700 Series valves.

    Not for use with hydraulic models which cannot be field converted.

    • Used on various Anets models such as Series 18 and where part is applicable
  17. Door Catch, Magnetic

    Part No. PD43233

    $112.46
    Door Catch, Magnetic
  18. DRAIN VALVE, 1-1/4"

    Part No. PD19022

    $157.82
    • Ball Drain Valve
    • Grease
    • Stainless steel
    • Size 1-1/4" FPT
    • 6-7/8" handle
    • Use on various Anets models such as MX-14E, SLG40 and where part is applicable.

  19. FILTER ENVELOPE, HEAVY DUTY 12.25 X 17

    Part No. PD42491

    $1,520.51
    • This is a heavy duty filter
    • Comes 5 to a case.
  20. FILTER PAPER CQF-90 (5)

    Part No. PD34054.1

    $1,002.65
    • Oil/Shortening Filter - 17-3/4" Dia
    • Use on various Anets models such as: CQF-90, and where part is applicable
  21. FILTER PAPER, ENVELOPE 12.25 X 17

    Part No. PD40849

    $356.27
    • 1 Case pack
    • 100 Per case pack
    • 12.25" x 17"
    • w/hole 1-1/2"
    • Use on various Anets models and where part is applicable
  22. FILTER PAPER, HOT OIL - DISC (100)

    Part No. PD43393

    $1,002.65
    • Round Type, Unpowdered
    • Qty. 100 per Pkg.
    • A = 17-3/4
    • Paper Thickness 44#
    • Filter has no center hole
  23. FILTER, GASKET DRAIN TO TK FM

    Part No. PD42666

    $31.50
    • Used on various Anets models, such as:
  24. FILTER, OIL (12-1/8 X 23.5)(100)

    Part No. PD230174

    $102.33
    • Oil Filter Sheet
    • 23-1/2 x 13-1/8
    • Rectangle
    • 100 per case
    • Used on Anets models that are 14" and where part is applicable on other fryers.
  25. FILTER, OIL (17 x 25) SHEETS

    Part No. PD46496

    $524.48
    • Oil Filter Sheets
    • 17 x 25"
    • No Hole 
    • Rectangle
    • 100 per case

     

  26. FITTING,COMPRESSION

    Part No. PD211431

    $31.50
    • FITTING,COMPRESSION COPPER STR 1/2 TB X 3/8
  27. Fryer Basket - Front Hook, Twin

    Part No. PD126550

    $55.26
    • Fryer Basket - Front Hook, Twin
    • 16" Length X 8-1/2" Width X 5-3/4" Height
    • Use for various Anets models such as 14X-1AA, 14X-1D, 14X-1E, 18X-1AA, 18X-1D, 18X-1E , 18D,18E,18EG, 20D,20E,20EG and only where part is applicable.
  28. Fryer Basket - Front Hook, Twin

    Part No. PD43266

    $168.21
    • Fryer Basket
    • Front Hook
    • Twin
    • Use for 14, 14(B, D, E, G, GS, UT22), 14X1(AA, B, D, DG, E, EG), Dl-(11, 17,22), E11, E11 (AA, D), E15, E15(AA, B, D), E17, E17(AA, D), E22, E22(AA, D), EC(11, 15, 17, 22), FGS14-6, FGS14-6(A, B), MX14(AA, D, E, EG), SX14(AA, B, D, E)
  29. Fryer Basket - Front Hook, Twin

    Part No. PDG10066

    $339.26
    • Fryer Basket - Front Hook, Twin
    • Commonly used on Anets models:  18(D, E, EG), 20(D, E, EG)
  30. FRYER BASKET HANGER

    Part No. PD52514

    $261.77
    • Hanger
    • Commonly used on Anets models: MX14-E/MX14/14G/14GS 
  31. Fryer Filter Paper, 12.25 x 23

    Part No. PD41968

    $360.99
    • Filer Paper Envelope
    • 12.25 x 23"
    • 100 per case
    • 1-1/2" hole
    • Commonly used on Anets fryer model: Filtermatic Filtronic II, FILT II-14, FILT II-14/14W, FILT II-14W, FILT II-18/18W, FILT II-18W and where item is applicable.
  32. Fryer Side Splash L or R, height 6"

    Part No. PD39118

    $667.17
    • Fryer Splash Guard 6" height
    • Fits Left or Right
    • Commonly Used On Models: SLG40
  33. Fryer Tank Joiner Strip 14"

    Part No. PD39117

    $406.35
    • Channel Strip for Fryer
    • 14"
    • Used to connect two fryers side by side so grease wont drip between the units.
    • Commonly Used On Models: MX14, SLG40
    • Dimensions are 20-7/8" x 3/4" x 1-1/2"
  34. GAS REGULATOR LP KIT

    Part No. PD31801.1

    $120.02
    • Thermopile
    • 36"
    • 2 Wire Leads
    • Spade terminals
    • Use for Gas Steam Generators with 0 probes (100,000 BTU, 2 Burner; 150,000 BTU, 3 Burner); with 3 Probes (160,000 BTU, 3 Burner; 200,000 BTU, 4 Burner; 210,000 BTU, 5 Burner).
    • Commonly used on Cleveland models such as;2DE, 2DE24, 2DG, 2DG24, 2DLE, 2DLG, 2DLLE, 2DLLG, 2DQTE, 2DQTG, 2DQTLE, 2DQTLG, 2DQTLLE, 2DQTLLG, 2DQTS, 2DQTSC, 2DS, 2DS24, 2DSC, 2DSC24, PDL-2J, PDL-2K, PDL-3J, PDL-3K, PDM-2J, PDM-2K, PDM-3J, PDM-3K, PDP-2J, PDP-2K, PDP-3J, PDP-3K, PEM160-2J, PEM160-3J, PEM200-2J, PEM200-3J, PEM24-2J, PEM24-2K, PEM24-3J, PEM24-3K, PEM250-2J, PEM250-3J, PEM300-2J, PEM300-3J, PEM36-2J, PEM36-2K, PEM36-3J, PEM36-3K, PEM48-2J, PEM48-2K, PEM48-3J, PEM48-3K, PGM160-2K, PGM160-3K, PGM200-2K, PGM200-3K, PGM250-2K, PGM250-3K, PGM300-2K, PGM300-3K, PSM-2J, PSM-2K, PSM-3J, PSM-3K and where part is applicable.
  35. GAS VALVE, 3-POS MILLIVOLT NATURAL

    Part No. PD36688.3

    $898.70
    • 2 LEAD OR COAXIAL
    • 1/2" X 3/4"
    • 3 POSITION OUTLET
    • 240,000 BTU
    • Commonly used on Anets, Bakers Pride, Cecilware, Southbend, Vulcan Hart, Frymaster, Garland
  36. GAS VALVE, NATURAL

    Part No. PD48104

    $540.54
    • Gas Valve
    • Natural
    • 1/2" In/Out
    • Used only if fryer has "RED" reset button.
    • Used on various Anets fryers such as SLG100 and where part is applicable.
  37. GASKET-SMALL FLANGE

    Part No. PD42665

    $31.50
    • Used on various Anets models, such as:
  38. GENERATOR, PILOT - PG-9

    Part No. PD114203

    $68.13
    • PG-9 Pilot Generator
    • Thermopile
    • 600-750 Millivolt
    • 36" Wire Leads (PG-9)
    • With spade terminals for 2 screw mount
    • Replacement for item PD114202
    • Not for use with Honeywell valves or White Rodgers PG 9. Use item PD114206
  39. HI LIMIT, SAFETY LCHM

    Part No. PD56541

    $170.10
    • Anets Hi Limit Safety 
    • LCHM type
    • Manual reset
    • Temp fixed 450 degrees F
    • Bulb size 1/4 x 4-7/8, nickel
    • capillary is 30"
  40. High Limit, 450 Max

    Part No. PD53163

    $210.74
    • Hi Limit Thermostat
    • 450° F max cutout
    • Manual reset
    • 36" Capillary tube
    • 3" x 5/16" Bulb
    • Used on various Anets Models Such As  SLG40 and where part is applicable
  41. HOSE, OIL FILTER

    Part No. PD50222

    $142.70
    • Oil Hose Assembly
    • Commonly used on various Anets models such as: 14 GS Filtronic II and where part is applicable
  42. Ignition Module Upgrade Kit

    Part No. PD4310

    $405.02
    NULL
  43. IGNITION MODULE, SPARK CONTROL

    Part No. PD4210

    $125.10
    • Ignition Module
    • 24V
    • 50/60 Hz
    • 90 Second Lockout
    • 4-7/8" X 3-1/8" White Box, W/ Pilot Light
    • Mounting Holes Different. Will Need To Drill New Hole(S).
    • New Style 24Vac, 4-7/8" X 3-1/8", W/Pilot Light.
    • Same Terminals As Old Box
    • New Style White Box
    • Old Style Gray Box /li>
    • 24V, 5-1/4" X 3-1/4" Grey Box
    • Use for Anets only where applicable.
  44. IGNITOR

    Part No. PD47071

    $31.50
    • Ignitor
    • Commonly used on Anets models such as GPC-14, MX-14E and where part is applicable.
  45. Interface Relay Assembly

    Part No. PD51643

    $742.77
    Interface Relay Assembly
  46. KIT, CONVERSION NATURAL TO LP GAS

    Part No. PD44384

    $1,332.45
    • Gas Conversion Kit
    • Natural to LP Gas
    • Includes spring, orifice, sensing regulator assembly, plugs, warning labels and instructions.
    • Commonly used on Anets models such as GPC, MX14 and where part is applicable. 
  47. Knob (For 700 Series Safeties)

    Part No. PD46465

    $31.50
    • Knob (For 700 Series Safeties)
    • Diameter 1-1/4"
    • Plastic
    • Beige
    • Use for RTG14, RTG14 (Taco Bell)
  48. Knob - Thermostat, 200-400F

    Part No. PD31802

    $102.06
    • Knob - Thermostat, 200-400°F
    • 2-1/4" Diameter
    • .187 Mount
    • Flat Down
    • Used on various Anets models such as: 14VFS, SLG100 and where part is applicable.
  49. KX Thermostat - 175-375 F

    Part No. PD19025

    $667.17
    • KX Thermostat - 175-375 F
    • Use for 14X-1AA, 14X-1D, 14X-1DG, 14X-1E, 14X-1EG, 18X-1AA, 18X-1D, 18X-1DG, 18X-1E, 18X-1EG, MX (AA, D, E & EG), SX-14 (AA, D & E), 14G & 14GS before 1988
  50. Lamp Socket

    Part No. PD51694

    $31.50
    • Commonly Used on Anets Models: Crispy
  51. LCCM Hi-Limit - 450? F

    Part No. PD30893

    $662.45
    • Hi Limit Thermostat
    • LCCM With Stuffing Box
    • 3/8" Nickel & Auto Reset
    • Fixed Temp 450°F
    • Capillary Length 36"
    • Bulb 5/16" x 3-5/8" Nickel
    • Commonly used on various models such as American Range, Anets, Imperial, Market Forge, Tri-Star, APW, Pitco and Royal Range models and where part is applicable.
  52. Momentary Push Button Switch

    Part No. PDG10061

    $149.27
    • Momentary Push Button Switch
    • Use for 14 & 18X-1AA, SX-14 (AA, D, E)
  53. NAT TO LP CONVERSION KIT

    Part No. PD42559

    $537.71
    • Gas conversion kit
    • Natural to LP Gas
    • Commonly used on Anets models such as SLG40 and where part is applicable. 
  54. On/Off Toggle Switch

    Part No. PDG10063

    $60.64
    • On/Off Black Toggle Switch
    • 10A-250V
    • 20A-125V
    • Fits hole 5/8 x 1-1/4"
    • SPST
    • Terminals: 2
    • Terminal Size 1/4"
    • Color Black or White
    • Use for models: 
      • Use for oven Series: EPO, ESO, GPO, GSO
      • Use on fryers models:  14 & 18X-1AA; 14 & 18X-1D & X-1E
    • And where part is applicable
  55. On/Off Black Rocker (with red light)

    Part No. PD19033

    $22.95
    • Black Rocker
    • (with red light)
    • On/Off
    • Use for models DI-11-17 & 22; E-11-17 & 22; SX-14 (AA & E)
  56. On/Off Black Rocker (with red light)

    Part No. PD46455

    $18.63
    • Black Rocker
    • (with red light)
    • On/Off
    • fits hole size 7/8 x 1-1/2"
    • SPST
    • 3 terminals, 1/4" tab
    • 20A
    • 250V

     

  57. On/Off/On Toggle

    Part No. PDG10062

    $28.86
    • On/Off/On Toggle
    • Use for All Power Filters (CQF Series)
  58. ORIFICE, LP #49

    Part No. PD36638.1

    $31.50
    • Orifice Burner
    • Size #49
    • LP
    • 1.56" long
  59. Orifice, LP for PG9 Pilot

    Part No. PD905476

    $18.90
    • Pilot Orifice
    • Liquid Propane
    • For PG9 Pilot
    • 5/16-32 x 1/4" CCT Male
    • Commonly used on various Anets models such as MX14, MX14AA, MX14D, MX14E, MX14EG, MKE fryer and where part is applicable.
  60. Orifice, Main Burner Natural Gas

    Part No. PD41995

    $31.50
    • Pilot orifice
    • Burner #31
    • Natural gas
    • 1.56 long
    • .018
  61. Orifiice, RNR TU 18E/20E NAT

    Part No. PD47557

    $31.50

     

  62. Permanent SCREEN Handles

    Part No. PD41922

    $60.48
    Permanent SCREEN Handles
  63. PILOT

    Part No. PD50174

    $409.19
    • Commonly used on Anets models: 18EG
  64. Pilot Burner - Nat/LP, 1/4" CCT

    Part No. PDG10060

    $190.89
    • Pilot Burner - Nat/LP, 1/4" CCT
    • Use for various Anets models such as 14VF(S) where part is applicable
  65. Pilot Generator - 32" (PG-9)

    Part No. PDG10056

    $233.42
    • Pilot Generator - 32" (PG-9)
    • Use for 14 & 18X-1 (AA, D & E); SX-14 (AA, D & E)
  66. Pilot Orifice Elbow - LP

    Part No. PDG10054

    $65.01
    • Pilot Orifice Elbow - LP
  67. Pilot Orifice Elbow - Nat

    Part No. PDG10053

    $70.63
    • Pilot Orifice Elbow - Nat
    • Tube Size (CCT): 1/4"
    • 5/16"-32 thread size
    • Natural Ga
    • #77
    • Used on various Anets models and only where part is applicable.
  68. PILOT, STANDING REWORKED

    Part No. PD47070

    $34.02
    • Pilot
    • Standing
    • Reworked
    • Commonly used on Anets models such as 14GS and where part is applicable.
  69. PROBE 13" RTD PRB

    Part No. PD56454

    $186.17
    • Anets Probe
    • RTD 1K DIN PROBE
    • 14.65" x 3.75" x .55"
  70. Probe Kit

    Part No. PD52346

    $378.00
    • Used on Various Anets Models Such AS: GPC18B
  71. RACK, WR/G,TU RK MX14/SLG40

    Part No. PD44668

    $116.24
    • Wire Support Rack,
    • Stainless Steel
    • 13-3/4 x 14-1/4"
    • Used on various Anets models such as MX-14E, SLG40 and where part is applicable.
  72. Relay, 24VDC, with Mounting tabs

    Part No. PD111402

    $175.50
    • Relay
    • 24VDC
    • Single Pole, Double Throw
    • With Mounting Tabs
    • Commonly used on Pitco models such as BK-SG14RS-PCFM, CKSSH60WC, DD24RUFM, ME14, PG-14D, SFSG14, SFSG14C-S, SFSG14R, SFSG14RS, SFSG14S, SFSG14T, SFSG14TS, SFSG18, SFSG18S, SG SERIES, SG14, SG14DI, SG14R, SG14RDI, SG14RS, SG14S, SG14S-D, SG14SD, SG14SSTC-S, SG14T, SG14TDI, SG14TS, SG18, SG18DI, SG18F, SG18S, SG18S-D, SG18SD, SGC, SGM1824, SGM24, SGM34, SRTG14, SSH55, SSH55R, SSH60, SSH60C-S-FD, SSH60W-C-S-FD, SSH75, SSH75R, SSH75RS, TurboFry 2000 ,18-2WKSUFM, DD-24RUFM, E12, E12A, E14, E14B, E18, E18B, E7, E7B, ME14, PG-14D, SG14, SG14DI, SG14R, SG14RDI, SG14RS, SG14S-D, SG14SSTC-S, SG14T, SG14TDI, SG18, SG18DI, SG18F, SG18S, SG18S-D, SGC, SGM1824, SGM24, SGM34, SGSEBNB-14, SGSEBNB-18, SSH55, SSH60C-S-FD, SSH60W-C-S-FD, SSH75, SSH75RS, TURBOFRY 2000 and only where part is applicable.
    • Fits Anets models such as 14x-1-e and only where part is applicable.
  73. RX Thermostat - 200-400 F

    Part No. PDG10059

    $154.98
    • RX Thermostat
    • 200-400 °F
    • Bulb 3 1/8" x 5"
    • Commonly used on Anetsberger models:  14VFS, SLG100, SLG40 and where part is applicable.
  74. Screen

    Part No. PD41921

    $178.61
    Screen
  75. Screen

    Part No. PD53870

    $306.18
    • Screen
    • 23" x 23"
    • Used on various Anets Models where part is applicable
  76. Screw Type Hi-Limit - 440F Fixed

    Part No. PD19026

    $479.12
    • Screw Type Hi-Limit
    • 440°F Fixed temperature
    • Used on various Anetsberger models such as 14 & 18X-1(D,DD,E,EG) From 10/69 to Serial # 200-75; FCL-11 & 14; UT-22,11UT-22, 14G, 14GS, 14GSU, 14UT-22, BFF18X26-2, MX-14AA, MX-14D, MX-14E, MX-14EG, MX-7AA, MX-7D, MX-7E, MX-7EG and only where part is applicable.
    • OEM #P8901-72 (Hi-Limit with Tab Terminals) is N/L/A. Factory now only uses this part (Hi-Limit with Wire Leads)
  77. Stuffing Box - 1/4" x 5/16"

    Part No. PDG11269

    $26.27
    • Stuffing Box - 1/4" x 5/16"
  78. Switch, Rocker On/Off Black

    Part No. PD37658

    $69.93
    • Switch
    • On/Off Black Rocker, Power
    • Spst
    • 10a with Red Light
    • Use for MX14 (AA, D, EG), 14x and where part is applicable.
  79. THERMISTER

    Part No. PD42395

    $385.56
    • Commonly used on Anets models: 14EL
  80. Thermocouple - with Junction Block

    Part No. PDG10057

    $45.20
    • Thermocouple
    • Capillary Length 36" (will work fine if replacing 18")
    • Includes junction block for high limit switch
    • Commonly used on Anets models: P8902-13

Items 1 to 80 of 103

Page:
  1. 1
  2. 2

Set Descending Direction
per page