Find ANETS GoldenFRY™ Fryer and other model replacement and repair parts here.
-
700 Gas Safety - 120 VAC
Part No. PD19030
$823.10- 700 Gas Safety - 120 VAC
- Natural Gas
- 3/4"
- 1/4" CCT Pilot Out
- Used on various Anets models such as GPC14, MX14E models AA, D, E where part is applicable.
-
-
ADAPTER, PG9
Part No. PD46913
$20.57- PG9 Adapter
- Slips over thermopile
- Converts it to PG9
- 750 MV milivolt pilot generator
- Brass
-
Assembly, Burner
Part No. PD61704
$130.41- Burner Assembly
- Commonly used on Anets models such as SLG40 and where part is applicable
-
BAFFLE, WLDMT SLG40/50
Part No. PD42705
$157.82- This is a made to order item only
- Used on various Anets models such as: 14VES and where part is applicable.
-
Basket Support Rack
Part No. PDG10065
$93.60- Basket Support Rack
- 13-1/2" x 13-1/2"
- Nickel plated
- Commonly used on Anets models and only where part is applicable.
-
BASKET, FRY, FULL SIZE
Part No. PD126549
$77.97- Fryer Basket
- 16-3/4" Length
- 17-1/2" Width
- 6" Height
- 2 Handels
- Placement of Hook Front
- Nickel Plated
- Type Full
- Used on various Anets models such as 18X1, 18X1(D,E,EG),18EG and only where part is applicable.
-
Baso Safety, Millivolt
Part No. PDG10058
$177.96- Gas Safety Valve
- 1/2 PSI
- Width 4-1/4"
- Millivolt
- 122,000 BTU
- 1/4" CCT Pilot In / Out
- 3/8" NPT Gas In / Out
- Manual Shut-Off Valve
- Works With Natural Gas Or Liquid Propane
- Commonly used on various Anets models and only where part is applicable.
-
-
BURNER, JET
Part No. PD31717
$31.50- Jet Burner
- LP Gas
- Commonly used on Anets models such as MX-14E and where applicable
-
Carling Switch
Part No. PD19036
$170.10- Carling Switch
- Seat, Melt/Fryer
- Commonly used on Anets models DI-11-17 E-11-17 SX-14 (AA E) and where part is applicable.
-
COMBO VALVE (NAT GAS, 3/4")
Part No. PD230172
$405.41- Natural Gas Valve
- 300,000 BTU
- 120 VAC actuator
- Black and white wire leads
- ECO slotted thermopile magnet
- 3/4" in & out
- 3/4 x 1/2" reducer bushings
- Has ECO slot for thermocouple
- Used on Anets model such as MX14E and where part is applicable.
-
-
CONTROL, WIRE 24 SPARK IGNITER
Part No. PD47781
$31.50- Spark Igniter Wire
- Connects to Igniter
- Used on various Anets models where part is applicable.
-
CONVERSION KIT, NATURAL TO LP
Part No. PD51872
$247.30- Conversion Kit
- Natural to LP
- M/V
- Commonly used on Anets model SLG40 where part is applicable.
-
CONVERSION KIT, REGULATOR LP TO NAT
Part No. PD53524
$215.46- Pressure Regulator Kit
- Gas Conversion
- LP to Natural gas
- 3.5" W.C
- Kit provides straight-line regulation and includes all the necessary parts including instructions to convert a specific factory model gas valve.
- Use with Robertshaw valves such as 7000, 7010, 7100, 7200 and 7222.
- Use with Robertshaw 700 Series valves.
Not for use with hydraulic models which cannot be field converted.
- Used on various Anets models such as Series 18 and where part is applicable
-
-
DRAIN VALVE, 1-1/4"
Part No. PD19022
$157.82- Ball Drain Valve
- Grease
- Stainless steel
- Size 1-1/4" FPT
- 6-7/8" handle
- Use on various Anets models such as MX-14E, SLG40 and where part is applicable.
-
FILTER ENVELOPE, HEAVY DUTY 12.25 X 17
Part No. PD42491
$1,520.51- This is a heavy duty filter
- Comes 5 to a case.
-
FILTER PAPER CQF-90 (5)
Part No. PD34054.1
$1,002.65- Oil/Shortening Filter - 17-3/4" Dia
- Use on various Anets models such as: CQF-90, and where part is applicable
-
FILTER PAPER, ENVELOPE 12.25 X 17
Part No. PD40849
$356.27- 1 Case pack
- 100 Per case pack
- 12.25" x 17"
- w/hole 1-1/2"
- Use on various Anets models and where part is applicable
-
FILTER PAPER, HOT OIL - DISC (100)
Part No. PD43393
$1,002.65- Round Type, Unpowdered
- Qty. 100 per Pkg.
- A = 17-3/4
- Paper Thickness 44#
- Filter has no center hole
-
-
FILTER, OIL (12-1/8 X 23.5)(100)
Part No. PD230174
$102.33- Oil Filter Sheet
- 23-1/2 x 13-1/8
- Rectangle
- 100 per case
- Used on Anets models that are 14" and where part is applicable on other fryers.
-
FILTER, OIL (17 x 25) SHEETS
Part No. PD46496
$524.48- Oil Filter Sheets
- 17 x 25"
- No Hole
- Rectangle
- 100 per case
-
-
Fryer Basket - Front Hook, Twin
Part No. PD126550
$55.26- Fryer Basket - Front Hook, Twin
- 16" Length X 8-1/2" Width X 5-3/4" Height
- Use for various Anets models such as 14X-1AA, 14X-1D, 14X-1E, 18X-1AA, 18X-1D, 18X-1E , 18D,18E,18EG, 20D,20E,20EG and only where part is applicable.
-
Fryer Basket - Front Hook, Twin
Part No. PD43266
$168.21- Fryer Basket
- Front Hook
- Twin
- Use for 14, 14(B, D, E, G, GS, UT22), 14X1(AA, B, D, DG, E, EG), Dl-(11, 17,22), E11, E11 (AA, D), E15, E15(AA, B, D), E17, E17(AA, D), E22, E22(AA, D), EC(11, 15, 17, 22), FGS14-6, FGS14-6(A, B), MX14(AA, D, E, EG), SX14(AA, B, D, E)
-
Fryer Basket - Front Hook, Twin
Part No. PDG10066
$339.26- Fryer Basket - Front Hook, Twin
- Commonly used on Anets models: 18(D, E, EG), 20(D, E, EG)
-
FRYER BASKET HANGER
Part No. PD52514
$261.77- Hanger
- Commonly used on Anets models: MX14-E/MX14/14G/14GS
-
Fryer Filter Paper, 12.25 x 23
Part No. PD41968
$360.99- Filer Paper Envelope
- 12.25 x 23"
- 100 per case
- 1-1/2" hole
- Commonly used on Anets fryer model: Filtermatic Filtronic II, FILT II-14, FILT II-14/14W, FILT II-14W, FILT II-18/18W, FILT II-18W and where item is applicable.
-
Fryer Side Splash L or R, height 6"
Part No. PD39118
$667.17- Fryer Splash Guard 6" height
- Fits Left or Right
- Commonly Used On Models: SLG40
-
Fryer Tank Joiner Strip 14"
Part No. PD39117
$406.35- Channel Strip for Fryer
- 14"
- Used to connect two fryers side by side so grease wont drip between the units.
- Commonly Used On Models: MX14, SLG40
- Dimensions are 20-7/8" x 3/4" x 1-1/2"
-
GAS REGULATOR LP KIT
Part No. PD31801.1
$120.02- Thermopile
- 36"
- 2 Wire Leads
- Spade terminals
- Use for Gas Steam Generators with 0 probes (100,000 BTU, 2 Burner; 150,000 BTU, 3 Burner); with 3 Probes (160,000 BTU, 3 Burner; 200,000 BTU, 4 Burner; 210,000 BTU, 5 Burner).
- Commonly used on Cleveland models such as;2DE, 2DE24, 2DG, 2DG24, 2DLE, 2DLG, 2DLLE, 2DLLG, 2DQTE, 2DQTG, 2DQTLE, 2DQTLG, 2DQTLLE, 2DQTLLG, 2DQTS, 2DQTSC, 2DS, 2DS24, 2DSC, 2DSC24, PDL-2J, PDL-2K, PDL-3J, PDL-3K, PDM-2J, PDM-2K, PDM-3J, PDM-3K, PDP-2J, PDP-2K, PDP-3J, PDP-3K, PEM160-2J, PEM160-3J, PEM200-2J, PEM200-3J, PEM24-2J, PEM24-2K, PEM24-3J, PEM24-3K, PEM250-2J, PEM250-3J, PEM300-2J, PEM300-3J, PEM36-2J, PEM36-2K, PEM36-3J, PEM36-3K, PEM48-2J, PEM48-2K, PEM48-3J, PEM48-3K, PGM160-2K, PGM160-3K, PGM200-2K, PGM200-3K, PGM250-2K, PGM250-3K, PGM300-2K, PGM300-3K, PSM-2J, PSM-2K, PSM-3J, PSM-3K and where part is applicable.
-
GAS VALVE, 3-POS MILLIVOLT NATURAL
Part No. PD36688.3
$898.70- 2 LEAD OR COAXIAL
- 1/2" X 3/4"
- 3 POSITION OUTLET
- 240,000 BTU
- Commonly used on Anets, Bakers Pride, Cecilware, Southbend, Vulcan Hart, Frymaster, Garland
-
GAS VALVE, NATURAL
Part No. PD48104
$540.54- Gas Valve
- Natural
- 1/2" In/Out
- Used only if fryer has "RED" reset button.
- Used on various Anets fryers such as SLG100 and where part is applicable.
-
-
GENERATOR, PILOT - PG-9
Part No. PD114203
$68.13- PG-9 Pilot Generator
- Thermopile
- 600-750 Millivolt
- 36" Wire Leads (PG-9)
- With spade terminals for 2 screw mount
- Replacement for item PD114202
- Not for use with Honeywell valves or White Rodgers PG 9. Use item PD114206
-
HI LIMIT, SAFETY LCHM
Part No. PD56541
$170.10- Anets Hi Limit Safety
- LCHM type
- Manual reset
- Temp fixed 450 degrees F
- Bulb size 1/4 x 4-7/8, nickel
- capillary is 30"
-
High Limit, 450 Max
Part No. PD53163
$210.74- Hi Limit Thermostat
- 450° F max cutout
- Manual reset
- 36" Capillary tube
- 3" x 5/16" Bulb
- Used on various Anets Models Such As SLG40 and where part is applicable
-
HOSE, OIL FILTER
Part No. PD50222
$142.70- Oil Hose Assembly
- Commonly used on various Anets models such as: 14 GS Filtronic II and where part is applicable
-
-
IGNITION MODULE, SPARK CONTROL
Part No. PD4210
$125.10- Ignition Module
- 24V
- 50/60 Hz
- 90 Second Lockout
- 4-7/8" X 3-1/8" White Box, W/ Pilot Light
- Mounting Holes Different. Will Need To Drill New Hole(S).
- New Style 24Vac, 4-7/8" X 3-1/8", W/Pilot Light.
- Same Terminals As Old Box
- New Style White Box
- Old Style Gray Box /li>
- 24V, 5-1/4" X 3-1/4" Grey Box
- Use for Anets only where applicable.
-
IGNITOR
Part No. PD47071
$31.50- Ignitor
- Commonly used on Anets models such as GPC-14, MX-14E and where part is applicable.
-
-
KIT, CONVERSION NATURAL TO LP GAS
Part No. PD44384
$1,332.45- Gas Conversion Kit
- Natural to LP Gas
- Includes spring, orifice, sensing regulator assembly, plugs, warning labels and instructions.
- Commonly used on Anets models such as GPC, MX14 and where part is applicable.
-
Knob (For 700 Series Safeties)
Part No. PD46465
$31.50- Knob (For 700 Series Safeties)
- Diameter 1-1/4"
- Plastic
- Beige
- Use for RTG14, RTG14 (Taco Bell)
-
Knob - Thermostat, 200-400F
Part No. PD31802
$102.06- Knob - Thermostat, 200-400°F
- 2-1/4" Diameter
- .187 Mount
- Flat Down
- Used on various Anets models such as: 14VFS, SLG100 and where part is applicable.
-
KX Thermostat - 175-375 F
Part No. PD19025
$667.17- KX Thermostat - 175-375 F
- Use for 14X-1AA, 14X-1D, 14X-1DG, 14X-1E, 14X-1EG, 18X-1AA, 18X-1D, 18X-1DG, 18X-1E, 18X-1EG, MX (AA, D, E & EG), SX-14 (AA, D & E), 14G & 14GS before 1988
-
-
LCCM Hi-Limit - 450? F
Part No. PD30893
$662.45- Hi Limit Thermostat
- LCCM With Stuffing Box
- 3/8" Nickel & Auto Reset
- Fixed Temp 450°F
- Capillary Length 36"
- Bulb 5/16" x 3-5/8" Nickel
- Commonly used on various models such as American Range, Anets, Imperial, Market Forge, Tri-Star, APW, Pitco and Royal Range models and where part is applicable.
-
Momentary Push Button Switch
Part No. PDG10061
$149.27- Momentary Push Button Switch
- Use for 14 & 18X-1AA, SX-14 (AA, D, E)
-
NAT TO LP CONVERSION KIT
Part No. PD42559
$537.71- Gas conversion kit
- Natural to LP Gas
- Commonly used on Anets models such as SLG40 and where part is applicable.
-
On/Off Toggle Switch
Part No. PDG10063
$60.64- On/Off Black Toggle Switch
- 10A-250V
- 20A-125V
- Fits hole 5/8 x 1-1/4"
- SPST
- Terminals: 2
- Terminal Size 1/4"
- Color Black or White
- Use for models:
- Use for oven Series: EPO, ESO, GPO, GSO
- Use on fryers models: 14 & 18X-1AA; 14 & 18X-1D & X-1E
- And where part is applicable
-
On/Off Black Rocker (with red light)
Part No. PD19033
$22.95- Black Rocker
- (with red light)
- On/Off
- Use for models DI-11-17 & 22; E-11-17 & 22; SX-14 (AA & E)
-
On/Off Black Rocker (with red light)
Part No. PD46455
$18.63- Black Rocker
- (with red light)
- On/Off
- fits hole size 7/8 x 1-1/2"
- SPST
- 3 terminals, 1/4" tab
- 20A
- 250V
-
-
-
Orifice, LP for PG9 Pilot
Part No. PD905476
$18.90- Pilot Orifice
- Liquid Propane
- For PG9 Pilot
- 5/16-32 x 1/4" CCT Male
- Commonly used on various Anets models such as MX14, MX14AA, MX14D, MX14E, MX14EG, MKE fryer and where part is applicable.
-
Orifice, Main Burner Natural Gas
Part No. PD41995
$31.50- Pilot orifice
- Burner #31
- Natural gas
- 1.56 long
- .018
-
-
-
-
Pilot Burner - Nat/LP, 1/4" CCT
Part No. PDG10060
$190.89- Pilot Burner - Nat/LP, 1/4" CCT
- Use for various Anets models such as 14VF(S) where part is applicable
-
Pilot Generator - 32" (PG-9)
Part No. PDG10056
$233.42- Pilot Generator - 32" (PG-9)
- Use for 14 & 18X-1 (AA, D & E); SX-14 (AA, D & E)
-
-
Pilot Orifice Elbow - Nat
Part No. PDG10053
$70.63- Pilot Orifice Elbow - Nat
- Tube Size (CCT): 1/4"
- 5/16"-32 thread size
- Natural Ga
- #77
- Used on various Anets models and only where part is applicable.
-
PILOT, STANDING REWORKED
Part No. PD47070
$34.02- Pilot
- Standing
- Reworked
- Commonly used on Anets models such as 14GS and where part is applicable.
-
-
-
RACK, WR/G,TU RK MX14/SLG40
Part No. PD44668
$116.24- Wire Support Rack,
- Stainless Steel
- 13-3/4 x 14-1/4"
- Used on various Anets models such as MX-14E, SLG40 and where part is applicable.
-
Relay, 24VDC, with Mounting tabs
Part No. PD111402
$175.50- Relay
- 24VDC
- Single Pole, Double Throw
- With Mounting Tabs
- Commonly used on Pitco models such as BK-SG14RS-PCFM, CKSSH60WC, DD24RUFM, ME14, PG-14D, SFSG14, SFSG14C-S, SFSG14R, SFSG14RS, SFSG14S, SFSG14T, SFSG14TS, SFSG18, SFSG18S, SG SERIES, SG14, SG14DI, SG14R, SG14RDI, SG14RS, SG14S, SG14S-D, SG14SD, SG14SSTC-S, SG14T, SG14TDI, SG14TS, SG18, SG18DI, SG18F, SG18S, SG18S-D, SG18SD, SGC, SGM1824, SGM24, SGM34, SRTG14, SSH55, SSH55R, SSH60, SSH60C-S-FD, SSH60W-C-S-FD, SSH75, SSH75R, SSH75RS, TurboFry 2000 ,18-2WKSUFM, DD-24RUFM, E12, E12A, E14, E14B, E18, E18B, E7, E7B, ME14, PG-14D, SG14, SG14DI, SG14R, SG14RDI, SG14RS, SG14S-D, SG14SSTC-S, SG14T, SG14TDI, SG18, SG18DI, SG18F, SG18S, SG18S-D, SGC, SGM1824, SGM24, SGM34, SGSEBNB-14, SGSEBNB-18, SSH55, SSH60C-S-FD, SSH60W-C-S-FD, SSH75, SSH75RS, TURBOFRY 2000 and only where part is applicable.
- Fits Anets models such as 14x-1-e and only where part is applicable.
-
RX Thermostat - 200-400 F
Part No. PDG10059
$154.98- RX Thermostat
- 200-400 °F
- Bulb 3 1/8" x 5"
- Commonly used on Anetsberger models: 14VFS, SLG100, SLG40 and where part is applicable.
-
-
Screen
Part No. PD53870
$306.18- Screen
- 23" x 23"
- Used on various Anets Models where part is applicable
-
Screw Type Hi-Limit - 440F Fixed
Part No. PD19026
$479.12- Screw Type Hi-Limit
- 440°F Fixed temperature
- Used on various Anetsberger models such as 14 & 18X-1(D,DD,E,EG) From 10/69 to Serial # 200-75; FCL-11 & 14; UT-22,11UT-22, 14G, 14GS, 14GSU, 14UT-22, BFF18X26-2, MX-14AA, MX-14D, MX-14E, MX-14EG, MX-7AA, MX-7D, MX-7E, MX-7EG and only where part is applicable.
- OEM #P8901-72 (Hi-Limit with Tab Terminals) is N/L/A. Factory now only uses this part (Hi-Limit with Wire Leads)
-
-
Switch, Rocker On/Off Black
Part No. PD37658
$69.93- Switch
- On/Off Black Rocker, Power
- Spst
- 10a with Red Light
- Use for MX14 (AA, D, EG), 14x and where part is applicable.
-
-
Thermocouple - with Junction Block
Part No. PDG10057
$45.20- Thermocouple
- Capillary Length 36" (will work fine if replacing 18")
- Includes junction block for high limit switch
- Commonly used on Anets models: P8902-13