AccuTemp Parts & Manuals: AccuTemp Products Inc. is founded in 1993, it is unique company, This is success story for all Americans. AccuTemp a great case for the contributions of small, individualistic, idea-driven foodservice equipment manufacturers. AccuTemp Products Inc. helped reorganize cooking by generating steam at lower temp under vacuum which allowed food to be authorized better and held for hours without loss of quality. AccuTemp's full line of products includes the connectionless steamer, the Evolution boiler less steamer, the Accu-Steam Griddle, and Edge Series of kettles and tilt skillets. KitchenStuff carries a huge in-stock inventory of only genuine OEM AccuTemp replacement parts, including gaskets, seals, ignition systems, controls, relays, and much more.
-
-
Automatic Ignition System - EV
Part No. PD54150
$190.56- Ignition Module
- Automatic
- Replaces original Wayne module
- 24V
- Used on various Accu-Temp models such as N6 Series where part is applicable
-
Ball Valve, Drain
Part No. PD51988
$80.75- Brass Ball valve drain
- Used on Various Accutemp Models Such As: 208D, S3, S6, S62083D120
- and where part is applicable
-
-
Blower, Combustion 120V
Part No. PD54151
$495.03- Combustion Blower
- 120V
- Sealed bearing
- Used on various Accu-Temp models such as N6 Series where part is applicable
-
Board, Status Indicator
Part No. PD61788
$368.88- Status Indicator Board
- Commonly used on various Accutemp models and where part is applicable
-
BURNER,INFRARED (9 X 17-5/8)
Part No. PD230085
$502.86- INFRARED BURNER
- Length 9-1/8"
- Width 17-3/4"
- Depth 3-3/8"
- INNER DIAMETER 5/8"
- MATERIAL-CERAMIC
- GAS TYPE -NATURAL GAS
- Used on various Accutemp models such as ACCU-STEAM GAS, GG 36", GG 48", GGF1201A3600, GGF1201A4800, GG36, GG48, PGF1201A3600, PGF1201, A4800 and where part is applicable.
-
-
BUTTON,PUSH (ON,GREEN)
Part No. PD230069
$39.59- Button
- Push on Green
- Commonly used on Accutemp model such as: 53, 56, 562083D120
-
Buzzer Timer
Part No. PD61789
$52.32- Buzzer Timer
- Commonly used on Accutemp models such as S62083D120 and where part is applicable
-
Caster, With Brake
Part No. PD61838
$65.25- Caster With Brake
- For steamers only
- Commonly used on Accutemp models such as S62083D120 and where part is applicable
-
COMPRESSION SPRING
Part No. PD48119
$15.95- Compression Spring
- 1" Long
- Used on various Accutemp models such as S Series, S3 Series, S6 Series, S62083D120 and where part is applicable.
-
CONTROL, THERMOSTAT
Part No. PD45747
$344.52- Thermostat
- 350 degrees F maximum
- SPST
- 24" capillary
- 125V
- Dipsealed G1
- 3/8" stuffing box
- 3/8 x 3-5/8" bulb
- Commonly used on AccuTemp kettles where part is applicable.
-
CONTROLLER, QUANTUM SERIES 130
Part No. PD45105
$347.65- Controller
- Quantum series 130
- Used on various Accutemp models such as E6 SERIES, E62083D100, EEK, N6 SERIES and only where part is applicable.
-
Drawer, Grease
Part No. PD61808
$482.85- Grease Drawer
- Overall Length is 30"
- OD of Drawer is 5-9/16"
- Drop In Style
- Commonly used on various Accutemp models and where part is applicable
-
-
Fuse, Slo-Blo 1/2 Amp
Part No. PD66191
$11.60- Slow Blow Fuse
- 1/2 amp
- Commonly used on various Accutemp models such as: E, E6.208.3.0.100, S3, S6, S62083D120 and where part is applicable.
-
Fuse, Slo-Blo 3 Amp
Part No. PD66190
$13.05- Commonly used on various Accutemp models such as: S64803D1403020 and where part is applicable.
-
GASKET, DOOR (14-1/2 x 10-3/8)
Part No. PD230080
$142.68- Door Gasket
- 14-1/2 x 10-3/8
- 368 mm x 264 mm
- Commonly used on models such as S3, S6, S62083D120 and where aplicable.
-
GASKET, DOOR S3, 3 PAN
Part No. PD52428
$142.68- Door Gasket, S3, 3 Pan
- 14-3/8 x 10-1/4"
- Use on variousAccutemp models such as: S3, S6, S62083D120 and where part is applicable.
-
GASKET, DOOR S6, 6 PAN
Part No. PD27353
$100.05- Door Gasket
- 6 Pan
- Inner Door Gasket
- Black silicone rubber
- 4 Sided
- 14 x 18-3/4"
- Commonly used on Accutemp models such as: E6 SERIES, E6.208.3.0.100, N6 SERIES, S SERIES, S6, S62083D120 and where part is applicable.
-
Gast Vacuum Pump Rebuild Kit
Part No. PD51803
$616.83- Commonly used on Accutemp models such as S3, S6, S62083D120 and where part is applicable.
-
Gauge, Vacuum
Part No. PD61541
$89.61- Vacuum Gauge
- 0-30 in
- 1/4" NPT
- 2-1/4" Dial
- Commonly used on Accutemp models such as S SERIES, S3, S6, S62083D120, and where part is applicable
-
Grease Pan, 4" D, Solid Pan, 1/3 size
Part No. PD61847
$57.80- Pan
- Steam table/Grease
- Stainless steel
- Solid
- 1/3 Size X 4"D
- 1 ea
- 3-3/4 L x 12-3/4 W x 4 D
- Heavy duty
- Constructed of 18/8 stainless steel
- 22 Gauge
- NSF certified
-
HANDLE, DOOR (QUICK RELEASE)
Part No. PD230076
$332.34- Door Handle
- Used on various Accutemp models such as: S, S3, S6, S62083D120 and where part is applicable
-
Hi Limit, Overtemp
Part No. PD54361
$76.56- Hi Limit
- Overtemp
- 17K heaters
- 2 terminal
- Stud screw mounted
- Used on various Accu Temp models such as 3 Pan, 6 Pan, Steam N Hold, Steamer where applicable.
-
HIGH LIMIT OVERTEMP ASSEMBLY
Part No. PD44709
$218.37- High limit Overtemp Assembly
- Commonly used on various Accutemp griddle models such as EGF2083A48, EGD2083B4800 and where part is applicable.
-
HINGE, STEAMER DOOR BRASS, PAIR
Part No. PD42456
$180.96- Steam Door Hinge
- This is sold as a pair (brass) only
- Commonly used on Accutemp models such as E6 Series, E6.208.3.0.100, S Series, S3, S6 and where part is applicable.
-
-
INSULATION 24 x 48 x 1
Part No. PD46653
$28.71- Insulation
- 24" x 48"
- 1" Thick
- Used on various Accutemp griddles and where part is applicable.
-
Knob, With D Spring
Part No. PD61508
$37.56- Knob for timers & thermostats
- Black with white indicator line
- 3/16" D-stem, flat down
- 1-5/8" Diameter
- Black Rubber Coated
- Commonly used on Accutemp models such as EG SERIES, EGD, EGF, EGF MILITARY, GG SERIES, GGF1201A36, S SERIES, S3, S6, S62083D120 and where part is applicable
-
LATCH, DOOR, OFFSET HANDLE (OLD STYLE)
Part No. PD230081
$207.93- Door Latch
- with Strike
- Magnetic
- Offset handle
- 11-1/2" OD
- Non Tumbling
- Commonly used on various Accutemp models.
-
NON BRAKE CASTER
Part No. PD57030
$60.03- Stand caster
- No brake
- For steamers only
- Commonly used on various Accutemp models such as S62083D120 and where part is applicable.
-
NUT 1/4-20 COATED W/NYLOC PRECOAT 80
Part No. PD70042
$6.00- Nut
- 1/4-20
- Coated w/Nyloc Precoat 80
- Anti-seize
- Fits Models: E6 Series, E6.208.3.0.100, E62083D100, EEK, S Series, S3 Series, S6 Series and where applicable
-
-
PCB, Water Board Sensor
Part No. PD66189
$247.95- Control Board
- (Low Water)
- 2-1/2" x 2-1/8" x 1-3/8"
- Commonly used on various Accutemp models such as: S3, S6, S62083D120, S64803D1403020 and where part is applicable.
-
-
Pressure Switch
Part No. PD54014
$102.66- Pressure Switch
- Used on various Accutemp models such as S62083D120 and where part is applicable
-
PROBE, WATER SENSOR
Part No. PD54366
$60.03- Probe
- Water Sensor
- Fits 1/2" hole
- Used on various Accutemp models such as E6 SERIES, E6.208.3.0.100, E62083D100, EEK, N6 SERIES, S SERIES, S3 SERIES, S6 SERIES, S62083D120, S64803D1403XXX where part is applicable.
-
PUMP ASSEMBY (VACUUM)
Part No. PD37307
$852.55- Thomas Pump Assembly
- (Vacuum)
- Use on various Accu-Temp models such as: 240-D-8-300, 208D12-300, S series, S3, S6 and where part is applicable.
-
PUMP HEAD
Part No. PD230086
$425.00- Pump Head Only
- Commonly used on models such as S3, S6 and where part is applicable.
-
Relay, General Purpose 208/240v
Part No. PD61790
$47.71- Control Relay
- 208/240v
- 3PDT
- Commonly used on Accutemp models such as S SERIES, S3, S6 and where part is applicable
-
REMOTE POTENTIOMETER ASSEMBLY
Part No. PD45153
$88.74- Remote potentiometer assembly
- Includes harness
- Used on various Accutemp griddles and where part is applicable.
-
RING, LOCK
Part No. PD230073
$27.41- Lock Ring
- 1-5/8 x 1-1/8
- ID 13/16"
- Plastic
- Commonly used on Accutemp models such as: Accu-Steam Gas, S3, S6, S62083D120 and where part is applicable.
-
RTD Gas Thermostat
Part No. PD44710
$337.56- RTD Gas Thermostat
- 24 V AC
- 200-400 Deg F
- 2 1/2" L X 3 1/4" W X 1 3/4" H
- Material-Plastic
- 1/4 X 15/16" D Stem
- Type-Solid state
- 6 each 1/4" Tab Terminals
- Commonly used on various Accutemp models such as EGD, GGF1201A36, and only where part is applicable.
-
Seal Kit, Valve Plate 4pk
Part No. PD52429
$79.17- Valve Plate Seal Kit
- Includes (4) Seals, (4) Flat Washers, (4) Wave Washers, (4) Nyloc Nuts
- Commonly used on Accutemp models such as S Series, S3 Series, S6 Series, S62083D120 and where part is applicable
-
SOLDER WASHER
Part No. PD47066
$28.71- Solder Washer
- Overtemp pressure washer
- 1-1/8" diameter
- 3/16" hole
- Commonly used on Accutemp models such as EG Series, EGD Series, EGF Military, EGF Series, EGF Series, EGF2083A48, GG Series, GGF Series, GGF1201A36, GGF1201A4800-T1 and where part is applicable.
-
-
Solenoid Rebuilt Kit (New style)
Part No. PD51164
$301.75- Solenoid Rebuild Kit
- Old stype has plastic parts and shorter shaft
- new style is teflon
- Commonly used on Accu Temp models such as: 240D6-300 and where part is applicable.
-
-
SOLID STATE RELAY, 208V
Part No. PD28778
$160.95- Solid State Relay
- 208V
- Commonly used on Accutemp models such as E6 Series, E6.208.3.0.100, E62083D100, EG Series, EGD Series, EGF Military, EGF Series, EGF Series, S Series, S3 Series, S6 Series, S62083D120 and where part is applicable.
-
SWITCH (N.C., 15 AMP)
Part No. PD230072
$41.62- Switch
- Normally closed
- 600VAC
- 15A
- Commonly used on models such as S3, S6, S62083D120 and where part is applicable.
-
SWITCH (N.O., 15 AMP)
Part No. PD230071
$44.66- Switch
- Normally open
- 600VAC
- 15A
- Commonly used on models such as Accu-Steam Gas, S3, S6, S62083D120 and where part is applicable.
-
Switch, Air Pressure
Part No. PD61544
$54.81- Air Pressure Switch
- Commonly used on Accutemp N6, Evolution steamers and where part is applicable
-
-
Temperature Gauge
Part No. PD51850
$148.77- 2"
- Commonly used on Accutemp models such as: S, S3, S6, S62083D120 and where part is applicable.
-
THERMAL JOINT COMPOUND
Part No. PD70043
$71.34- Thermo Paste
- Joint Compound
- Type 120
- Silicon
- Fits Models: E6 Series, E6.208.3.0.100, E62083D100, EEK, S Series, S3 Series, S6 Series and where applicable.
-
Thermocouple, 24"
Part No. PD39004
$64.38- Thermocouple
- 24" Wire
- 26-1/2" Overall Length
- 2 Leads
- Coaxil Wire
- Commonly used on S6, S3, S62083D120, and where part is applicable
-
Thermocouple, RTD
Part No. PD61507
$167.04- RTD Thermocouple
- Length - 45"
- Must be used with RTD Thermostat
- Commonly used on Accutemp models such as EG SERIES, EGF, GGF1201A36 and where part is applicable
-
THERMOSTAT (SOLID STATE, DC)
Part No. PD230067
$349.74- Thermostat
- Solid state
- 100 to 200 degrees F
- 208/240VAC input
- Output V DC
- Used on Accutemp S6 series models and where applicable.
-
THERMOSTAT, DC (7 PIN)
Part No. PD61224
$276.66- DC thermostat
- 208/240 Input
- 100-200 DEG F
- Commonly used on Accutemp models where part is applicable.
-
Thermostat, Electric RTD
Part No. PD61506
$368.01- RTD Electric Thermostat
- Length - 3 1/4"
- Width - 2 1/2"
- Height - 1 3/4"
- 230v
- Must use with RTD Temperature Sensor
- Commonly used on Accutemp models such as EG SERIES, EGF, EGF MILITARY and where part is applicable
-
Thermostat, Solid State (6x Tab)
Part No. PD230068
$366.27- Solid State Thermostat
- 100 to 200 deg F
- 208/240 V AC input
- 1/4" Tab Terminals (6x)
- 3/16" D-Stem
- Used on various Accutemp models such as S SERIES, S3, S3 SERIES, S3-3-Pan, S6, S6 SERIES, S6-6-Pan, S62081D060XXXX, S62083D080XXXX, S62083D100XXXX, S62083D120, S62083D120XXXX, S62083D170XXXX, S62301D073XXXX, S62401D060XXXX, S62403D080XXXX, S62403D107XXXX, S62403D160XXXX, S63805D067XXXX, S63805D090XXXX, S63805D130XXXX, S64005D074XXXX, S64005D100XXXX, S64005D148XXXX, S64155D080XXXX, S64155D107XXXX, S64155D160XXXX, S64403D090XXXX, S64403D180XXXX, S64803D140XXXX and only where part is applicable.
-
THOMAS PUMP INCLUDING CONVERSION KIT
Part No. PD45612
$1,349.80- Conversion Kit to Thomas Pump
- Replaces Gast Pump
- Includes all hardware to install new pump.
- Includes Thomas pump.
- Commonly used on Accutemp models such as S6 Series and where part is applicable
-
Thomas Rod and Diaphram Assy
Part No. PD51232
$525.48- Repair kit
- Commonly used on various Accutemp Models including 480D12-300
-
Timer, 180 minute
Part No. PD42820
$267.09- 120 Minute timer
- for Units with Serial number Number 29030 and Above
- Used on various Accutemp models such as S3, S6, S62083D120, SJ4803D, and where part is applicable.
-
Timer, 90 Minute
Part No. PD51970
$176.61- 90 Minute timer
- for Units with Serial number Number 29030 and Above
- Commonly Used on Accutemp Models: S3, S6, S62083D120
-
VACCUM PUMP BRACKET
Part No. PD57109
$66.12- Vaccum Pump Bracket
- For Thomas pump
- Commonly used on various Accutemp Steamer models and where part is applicable.
-
Vacuum Pump
Part No. PD52078
$1,349.80- Vacuum pump
- Gast Type, New Style
- Used on Various Accutemp Models Such AS: S3, S6, S62083D120
-
WATER LEVEL CONTROL BOARD
Part No. PD47503
$261.87- Water Level Control Board
- Used on Accu-Temp models such as E6 Series, E6.208.3.0.100, E62083D100, N6 Series, S Series, S3 Series, S6 Series and where part is applicable.
-
WATER SENSOR PROBE
Part No. PD47504
$60.03- Water Sensor Probe
- Used on Accutemp models such as E6 Series, E6.208.3.0.100, E62083D100, EEK, N6 Series, S Series, S3 Series, S6 Series, S62083D120 and where part is applicable.