Slicers
-
181.82
Part No. PD51277
$278.65- Commonly used on various Univex models such as 4509, 4510, 4512 and where part is applicable.
-
Adjust Knob, Slice
Part No. PD29617.1
$119.89- Slice Adjust Knob
- 2-7/8" Diameter
- Range 0-15
- Mount .5" round hole
- 2 Set screws
- Commonly used on various Univex models such as 4509, 4510, 7510, 7512, 7515, 8512, 9512, 9514 and where part is applicable.
-
ADJUSTMENT SPACER (p)
Part No. PD138585
$184.77- Adjustment Spacer
- Commonly used on various Univex models such as 7510, 7512, 8512, 9512 and where part is applicable.
-
ANCHOR, CARRIAGE
Part No. PD26578
$44.34- Carriage anchor
- Commonly used on various Univex models such as 7510, 6509, 6512, 8512, 7512, 9514 and where part is applicable.
-
Arm Slicer
Part No. PD139031
$15.80- Arm
- Commonly used on various Univex models such as 1000S and where part is applicable.
-
ARM SUPPORT BUSHING
Part No. PD138575
$56.88- Commonly used on various Univex models such as 8512, 9514, 9512 and where part is applicable.
-
ARM, AUTO CONNECTING
Part No. PD138615
$174.11- Commonly used on various Univex models such as 8512 and where part is applicable.
-
ARM, CARRIAGE
Part No. PD138459
$236.84- Commonly used on various Univex models such as 6512 and where part is applicable.
-
ARM, CARRIAGE (p)
Part No. PD138397
$288.52- Commonly used on various Univex models such as 4512 and where part is applicable.
-
ARM, CARRIAGE (p)
Part No. PD138550
$304.28- Commonly used on various Univex models such as 7510, 7512 and where part is applicable.
-
ARM, CARRIAGE (WITH HANDLE)
Part No. PD138390
$200.74- Commonly used on various Univex models such as 4509, 4510, 4512 and where part is applicable.
-
ARM, CARRIAGE (WITH HANDLE)
Part No. PD215437
$121.43- Commonly used on various Univex models such as 4509 and where part is applicable.
-
ARM, IDLER
Part No. PD138643
$50.86- Commonly used on various Univex models such as 8512 and where part is applicable.
-
ARM`S PIVOT
Part No. PD139092
$74.76- Commonly used on various Univex models such as 1000S, 1000M and where part is applicable.
-
Assembly, Blade Drive
Part No. PD61707
$687.79- Blade Drive Assembly
- Commonly used on various Univex models such as 8512 and where part is applicable.
-
Assembly, Rear Leg (MG22)
Part No. PD61575
$152.88- Rear Leg Assembly
- Includes Stud M10-1.5 x 22MM
- Commonly used on various Univex models such as MG22 and where part is applicable.
-
AUTO BUSHING
Part No. PD50602
$361.69- Commonly used on various Univex models such as 8512 and where part is applicable.
-
AUTO DRIVE BELT
Part No. PD50623
$77.04- Commonly used on various Univex models such as 8512 and where part is applicable.
-
AXLE, IDLER ARM
Part No. PD138648
$26.60- Commonly used on various Univex models such as 8512 and where part is applicable.
-
Back Knife Guard 7510, 7512
Part No. PD138520
$598.47- Back Knife Guard
- Commonly used on various Univex models such as 7510, 7512 and where part is applicable.
- 1989 and earlier.
-
BACK KNIFE GUARD 7510, 7512
Part No. PD138544
$266.83- Commonly used on various Univex models such as 7512 and where part is applicable.
-
BACK KNIFE GUARD MOD. 7512
Part No. PD215501
$371.89- Commonly used on various Univex models such as 7512 and where part is applicable.
-
BALL
Part No. PD138590
$8.43- Commonly used on various Univex models such as 8512, 9514, 7510, 7512 and where part is applicable.
-
BALL BEARING
Part No. PD30589
$1.96- Ball Bearing
- Commonly used on various Univex models such as 4509, 4510, 4512, 6509, 6512, 7510, 7512, 8512, 9512, 9514 and where part is applicable.
-
BALL BEARING
Part No. PD41067
$19.59- Bearing, Ball
- Commonly used on various Univex models such as 8512, 9514, BC18, G PEELER, MG8912, PM91, SRM12, SRM20, SRM30+, SRMF20, VS2000, M12, M20 and where part is applicable.
- Please verify serial number when ordering.
-
BALL BEARING 6004 DDU
Part No. PD54132
$24.17- Ball Bearing
- Commonly used on various Univex models such as 8713M, 8713S where part is applicable.
-
BALL BEARING 6204 2RS
Part No. PD215541
$31.32- Ball Bearing
- Commonly used on various Univex models such as 9512, 8713S, 8713M, 1000S, 1000M and where part is applicable.
-
BALL STUD
Part No. PD138589
$8.25- Ball Stud
- Commonly used on various Univex models such as 7510, 7512, 8512, 9514, 9512 and where part is applicable.
-
BAR CARRIAGE SLIDE
Part No. PD139073
$175.80- Commonly used on various Univex models such as 1000S, 1000M and where part is applicable.
-
Bar, Carriage
Part No. PD138523
$255.92- New Style
- 24 MM Diameter
- After 1992
- Commonly used on various Univex models such as 7512 and where part is applicable.
-
BAR, CARRIAGE SLIDE (OLD STYLE)
Part No. PD37555
$96.58- This round bar is not mounted by end screws
- 20 MM Units prior to 1992
- 20mm diameter
- Commonly used on various Univex models such as 7512 and where part is applicable.
-
BAR, FRAME
Part No. PD138369
$31.30- Commonly used on various Univex models such as 4509, 4510, 4512 and where part is applicable.
-
BAR, FRAME (p)
Part No. PD138793
$60.96- Commonly used on various Univex models such as 9514 and where part is applicable.
-
BAR, LAST SLICE DEVICE
Part No. PD139083
$112.42- Commonly used on various Univex models such as 1000S, 1000M and where part is applicable.
-
BAR, ROUND
Part No. PD138461
$48.80- Commonly used on various Univex models such as 6512 and where part is applicable.
-
BAR, ROUND(20mm dia)(END MOUNT)(p)
Part No. PD40134
$101.38- Slide Rod
- 19" in length
- Commonly used on various Univex models such as 7510, 7512 and where part is applicable.
-
BAR, SLICE THICKNESS DEVICE
Part No. PD138555
$110.06- Commonly used on various Univex models such as 7510, 7512 and where part is applicable.
-
BAR, SLIDE (ROUND)
Part No. PD138419
$222.07- Commonly used on various Univex models such as 6509 and where part is applicable.
-
BAR, SLIDE (SQUARE)
Part No. PD138422
$62.15- Commonly used on various Univex models such as 6509 and where part is applicable.
-
-
BARRING GEAR PLATE
Part No. PD139066
$34.90- Commonly used on various Univex models such as 1000S, 1000M and where part is applicable.
-
BEARING
Part No. PD137299
$17.00- Commonly used on various Univex models such as SRM5, SRM8 and where part is applicable.
-
BEARING
Part No. PD137300
$20.57- Commonly used on various Univex models such as SRM5, SRM8 and where part is applicable.
-
BEARING
Part No. PD139042
$86.61- Commonly used on various Univex models such as 1000M, 1000S and where part is applicable.
-
BEARING M12 X 13
Part No. PD215600
$48.06- Commonly used on various Univex models such as 1000M,1000S and where part is applicable.
-
BEARING SPACER
Part No. PD50569
$21.85- OD is 1"
- Length is 1-3/8"
- Commonly used on various Univex models such as 7510, 8512, 1000S, 1000M and where part is applicable.
-
BEARING WASHER
Part No. PD40810
$1.56- Commonly used on various Univex models such as 8512, 6509, 6510, 6512,7510, 7512, BC14, 9512, 4509, 4510, 4512, 9514 and where part is applicable.
- Inside Dimensions are 5/16"
- Outside Dimensions are 9/16"
-
BEARING, (6001-2RS-1)(p)
Part No. PD138616
$28.12- Commonly used on various Univex models such as 8512 and where part is applicable.
-
BEARING, (6200RS)
Part No. PD138636
$40.14- Commonly used on various Univex models such as 8512 and where part is applicable.
-
BEARING, (6305LL)
Part No. PD137588
$21.17- Commonly used on various Univex models such as M60 and where part is applicable.
-
BEARING, (AS202)(p)
Part No. PD138631
$74.95- Commonly used on various Univex models such as 8512 and where part is applicable.
-
BEARING, 620002 RS
Part No. PD138642
$34.22- Commonly used on various Univex models such as 8512, DS12, DS14, DS18 and where part is applicable.
-
BEARING, 6202-ZZ
Part No. PD138356
$25.76- Commonly used on various Univex models such as 4509, 4510, 4512, DS12, DS14, DS18 and where part is applicable.
- Please verify serial number when ordering.
-
BEARING, 625-Z
Part No. PD138378
$28.35- Commonly used on various Univex models such as 4509, 4510, 4512 and where part is applicable.
-
BEARING, 6305ZZ
Part No. PD137578
$32.20- Commonly used on various Univex models such as M60 and where part is applicable.
-
BEARING, RADIAL 608-2Z
Part No. PD28795
$19.31- Roller Ball Bearing
- Radial
- 8 x 22 x 7 skate
- Commonly used on various Univex models such as 6512, 8512, 9514, 7510, 6509, BC14, 9512 and where part is applicable.
-
BEARING, SEALED
Part No. PD26652.1
$14.33- Ball Bearing
- Sealed
- TBBS bearing
- Boundary dimensions (mm): 17 bore x 40 diameter x 12 width
- Imperial dimensions: 9/16 diameter x 11/16 x 7/16"
- Commonly used on various Univex models such as 7510, 7512,6509, M12, 6512, 8512, SRM12 and where part is applicable.
-
BELLVILLE WASHER
Part No. PD139134
$31.06- Commonly used on various Univex models such as 1000M, 1000S and where part is applicable.
-
belt
Part No. PD215539
$80.52- Belt
- This item is non returnable. At this time there is no identifier for which model this belt is for. It can only be matched by the Univex part number.
- Commonly used on various Univex slicer models where part is applicable.
-
BELT SUPPORT
Part No. PD215571
$39.68- Commonly used on various Univex models such as 1000M,1000S and where part is applicable.
-
BELT, 2L-140 (OLD STYLE) 1/4 x 14"
Part No. PD138412
$41.25- 2 required
- Belt
- Poly V belt
- Commonly used on various Univex models such as 6509 and where part is applicable.
- 1/4" x 14"
- Note: Newer version of 6509 Uses a flat Bando rib belt with 8 ribs. Verify before ordering and see PD14821 should you require the newer flat ribbed belt.
-
BELT, POLY V 1000M/1000S
Part No. PD139038
$115.78- V Belt
- Poly
- Old style
- Commonly used on various Univex models such as 1000M, 1000S and where part is applicable.
-
BELT, POLY-8 RIBBED
Part No. PD138646
$68.90- 8 Ribbed Poly Belt.
- Total length is approximately 18.06"
- Commonly used on various Univex models such as 8512 and where part is applicable.
NOTE: Make sure you check your existing belt to make sure it is a ribbed belt and not a V-belt.
-
BELT, POLY-V 8 RIBS
Part No. PD411211
$99.40- Poly - V Belt
- 8 Ribs
- Commonly used on various Univex models such as 6509, 6512 and only where part is applicable.
-
BELT, RIBBED, RIBBED
Part No. PD47512
$125.48- Belt
- Blade drive belt
- Ribbed (12)
- Used on Univex model 1000S and where part is applicable.
-
BELT, V-TYPE 13" X 1/4" X 1/8"
Part No. PD38327
$35.48- V-Belt
- 13" x 1/4" x 1/8"
- Commonly used on various Univex models such as S-10 and where part is applicable.
-
BLACK PLASTIC HANDLE
Part No. PD139036
$173.81- Handle
- Black
- Plastic
- Graduated
- Commonly used on various Univex models such as 1000M, 1000S and where part is applicable.
-
BLADE
Part No. PD139037
$535.77- Commonly used on various Univex models such as 1000M, 1000S and where part is applicable.
-
BLADE GEAR 25 TOOTH
Part No. PD29470
$190.32- Blade Gear
- This is a 25 tooth brass gear
- Commonly used on various Univex models such as 8512, 9512, 9514 and only where part is applicable.
-
BLADE GUARD SHAFT
Part No. PD30428
$36.90- Threaded on both ends
- Commonly used on various Univex models such as 6509, 6512 and where part is applicable.
-
Blade Guard, Center Disk
Part No. PD51276
$180.68- Commonly used on various Univex models such as 4509, 4510, 4512 and where part is applicable.
-
Blade Insert
Part No. PD138415
$10.75- OD is 15/16"
- ID is 3/4"
- Height is 3/4"
- Commonly used on various Univex models such as 6509 and where part is applicable.
-
Blade Pulley Assembly
Part No. PD51285
$418.51- Blade Pulley Assembly
- Includes :-
- Blade Support
- Bearing
- Pulley
- Insert, Pulley
- Spacer, Bearing
- Commonly used on various Univex models such as 4509, 4510, 4512 and where part is applicable.
-
Blade Pulley Assembly
Part No. PD51286
$483.96- Commonly used on various Univex models such as 6512 and where part is applicable.
-
BLADE SCREW
Part No. PD30429
$2.66- Blade screw
- Commonly used on various Univex models such as 4509, 4510, 4512, 6509, 6512, 7510, 7512, 8512, 9512, 9514 and only where part is applicable.
-
BLADE SUPPORT ASSEM. (p)
Part No. PD138813
$669.48- Commonly used on various Univex models such as 9514 and where part is applicable.
-
BLADE SUPPORT ASSEMBLY (OLD STYLE 6-5/8)
Part No. PD50621
$728.21- Blade Support Assembly (6-5/8" Height)
- Please verify serial number
- Commonly used on various Univex models such as 8512 and where part is applicable.
-
BLADE, 11-3/4" 3-HOLE MOUNTING
Part No. PD14845
$353.06- 11-3/4 Inch
- OLD STYLE
- 3 Hole Mount
- Hard Chrome
- Commonly used on various Univex models such as 7510, 7512 and where part is applicable.
-
BLADE, 9514 (p)
Part No. PD138790
$342.48- Commonly used on various Univex models such as 9514 and where part is applicable.
-
Blade, Round Hub, 10"
Part No. PD29886
$292.20- Slicing Blade
- 10" Blade
- 3 Mounting Holes
- Hard Carbon Blade
- On models after 1992
- Commonly used on various Univex models such as 4510, 6510, 7510 (09/00) and where part is applicable.
- Please verify serial number