1+404-794-8110 / USA 800-366-9709
800-366-9709
Browse By

Filter

Category
  1. Beaters, Bowls, Hooks, Whips, Knives
  2. Mixer parts

Mixer parts

Univex has been manufacturing mixers since the 1950’s. They know what they are doing. Univex makes booth Planetary mixers and Spiral mixers. We support all the Univex replacement parts for their mixers. We also support all agitators for these mixers such as batter beaters, wire whips, dough hooks, four-wing whips, pastry knives, splash rings and smaller mixing bowls that fit on large mixers when less product is needed for production. We also offer universal wire bowl guards, a non Univex item. (Univex wire bowl guards must be installed by the factory in case you need to upgrade your unit. Contact us about this specialized service).

Items 1 to 80 of 633

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction
per page
  1. 12/20 BASE LEG CAP

    12/20 BASE LEG CAP

    Part No. PD137441

    $6.15
    • Commonly used on various Univex models such as SRM5, SRM8 and where part is applicable.

  2. 5 QT BOWL SUPPORT

    5 QT BOWL SUPPORT

    Part No. PD137264

    $165.19
    • Bowl Support
    • 5 Quart
    • Commonly used on various Univex models such as SRM-8 and where part is applicable.

  3. Assembly, Bearing Flange

    Assembly, Bearing Flange

    Part No. PD61878

    $75.74
    • Bearing Flange Assembly
    • Commonly used on various Univex models such as SRM60, SRM80, SRM80+ and where part is applicable.

  4. Assembly, Bowl Lift Cam

    Assembly, Bowl Lift Cam

    Part No. PD137407

    $149.08
    • Bowl Lift Cam Assembly
    • Does Not include Roll Pin or Screws
    • Commonly used on various Univex models such as M20, SRM20, SRMF20, SRM30, BC18 and where part is applicable.

  5. Assembly, Bowl Lift Connecting Rod

    Assembly, Bowl Lift Connecting Rod

    Part No. PD137396

    $83.81
    • Bowl Lift Connecting Rod Assembly
    • Commonly used on various Univex models such as M20, SRM20, SRMF20, BC18 and where part is applicable.

  6. Assembly, Pinion Gear

    Assembly, Pinion Gear

    Part No. PD61876

    $206.84
    • Pinion Gear Assembly
    • Commonly used on various Univex models such as SRM80+ and where part is applicable.

  7. Assembly, PTO Knob

    Assembly, PTO Knob

    Part No. PD33782.5

    $57.12
    • PTO Knob Assembly
    • Thread size is 1/2"
    • Commonly used on various Univex models such as M12, M20, M60, SRM12, SRM20, SRM30+, SRM60, SRM80, SRMF20, PM91, MG89, VS2000 and where part is applicable.
    • Commonly used for models such as:
      • PM91 Serial # P13020165 and newer.
      • MG89 Serial # P13020024 and newer.
      • VS2000 Serial # P130206 and newer.

  8. Assembly, Switch

    Assembly, Switch

    Part No. PD61877

    $71.98
    • Switch Assembly
    • Commonly used on various Univex models such as SRM60, SRM80, SRM80+ and where part is applicable.

  9. ATTACHMENT BOLT

    ATTACHMENT BOLT

    Part No. PD50618

    $43.56
    • Commonly used on various Univex models such as SRM and where part is applicable.

  10. BALL BEARING

    BALL BEARING

    Part No. PD41067

    $19.59
    • Bearing, Ball
    • Commonly used on various Univex models such as 8512, 9514, BC18, G PEELER, MG8912, PM91, SRM12, SRM20, SRM30+, SRMF20, VS2000, M12, M20 and where part is applicable.
    • Please verify serial number when ordering.

  11. BALL BEARING

    BALL BEARING

    Part No. PD50400

    $54.26
    • Commonly used on various Univex models such as SRM30, SRM30+ and where part is applicable.
    • Please verify serial number
    • Outside Diameter is 2"
    • Inside Diameter is 1"

  12. BALL, STEEL 1/4"DIA.(p)

    BALL, STEEL 1/4"DIA.(p)

    Part No. PD138226

    $4.77
    • Ball
    • Steel
    • 1/4" Diameter
    • Commonly used on various Univex models such as BC18, SRM12, SRM20, SRM30+,SRM30, SRM60, SRM80, SRMF20,M12, M20 and where part is applicable.

  13. BASE, HSG SRM30 PLUS (p)

    BASE, HSG SRM30 PLUS (p)

    Part No. PD137481

    $542.10
    • Commonly used on various Univex models such as SRM30+ and where part is applicable.

  14. BASE, SWIVEL BRACKET (p)

    BASE, SWIVEL BRACKET (p)

    Part No. PD137462

    $45.60
    • Swivel Bracket
    • Commonly used on various Univex models such as SRM20, SRM30+, SRMF20, M20 and where part is applicable.

  15. Bearing

    Bearing

    Part No. PD56579

    $19.58
    • Univex Bearing
    • Commonly used on Univex models such as 8512, BC18, G, G-Peeler, MG8912, PM91, SRM12, SRM20, SRM30+, SRMF20, VS2000 and only where applicable.

  16. BEARING (6206LL)(p)

    BEARING (6206LL)(p)

    Part No. PD137663

    $42.20
    • Bearing
    • 6206LLUC3
    • Commonly used on various Univex models such as DD23, SRM60, SRM80, SRM80+ and where part is applicable.

  17. BEARING PILLOW BLOCK

    BEARING PILLOW BLOCK

    Part No. PD137582

    $72.80
    • Commonly used on various Univex models such as M60 and where part is applicable.

  18. BEARING, (5207LL)

    BEARING, (5207LL)

    Part No. PD137671

    $170.12
    • Bearing
    • 5207LL
    • Commonly used on various Univex models such as SRM60, SRM80, SRM80+ and where part is applicable.

  19. BEARING, (6207LL)(p)

    BEARING, (6207LL)(p)

    Part No. PD137590

    $29.14
    • Bearing
    • 6207LL
    • Commonly used on various Univex models such as M60, SRM60, SRM80, SRM80+ and where part is applicable.

  20. Bearing, 6207ZZ (p)

    Bearing, 6207ZZ (p)

    Part No. PD137579

    $31.74
    • Bearing
    • 6207ZZ
    • Commonly used on various Univex models such as M60, SRM60, SRM80, SRM80+ and where part is applicable.

  21. BEARING, ANGULAR CONTACT (5209ZZ)

    BEARING, ANGULAR CONTACT (5209ZZ)

    Part No. PD137662

    $182.16
    • Bearing
    • Angular contact
    • 3-1/4" diameter
    • Commonly used on various Univex models such as SRM60, SRM80 and where part is applicable.

  22. BEARING, BALL (6205LL)

    BEARING, BALL (6205LL)

    Part No. PD35053

    $21.04
    • Commonly used on various Univex models such as SRM30+, SRM60, SRM80 and where part is applicable.
    • Please verify serial number when ordering

  23. BEARING, BRONZE (BOSGEAR)(p)

    BEARING, BRONZE (BOSGEAR)(p)

    Part No. PD137664

    $14.90
    • Commonly used on various Univex models such as SRM60, SRM80 and where part is applicable.

  24. BEARING, FLANGE (p)

    BEARING, FLANGE (p)

    Part No. PD137667

    $45.58
    • Commonly used on various Univex models such as SRM60, SRM80 and where part is applicable.

  25. BEARING, M12C (p)

    BEARING, M12C (p)

    Part No. PD137327

    $28.86
    • Commonly used on various Univex models such as SRM12, M12 and where part is applicable.

  26. BEARING, M12C (p)

    BEARING, M12C (p)

    Part No. PD137329

    $72.82
    • Commonly used on various Univex models such as SRM12, M12 and where part is applicable.

  27. BEARING, RADIAL 5204ZZ

    BEARING, RADIAL 5204ZZ

    Part No. PD137443

    $49.44
    • Bearing
    • Commonly used on various Univex models such as G Peeler, SRM20, SRMF20, M20 and where part is applicable.

  28. BEARING, SRM20

    BEARING, SRM20

    Part No. PD50302

    $49.44
    • Bearing
    • 5204ZZ
    • Commonly used on various Univex models such as G Peeler, SRM20, SRMF20 and only where part is applicable.

  29. BEARING, SRMF20

    BEARING, SRMF20

    Part No. PD50303

    $49.44
    • Bearing
    • 5204ZZ
    • Commonly used on various Univex models such as G Peeler, SRM20, SRMF20 and only where part is applicable.

  30. BEATER HEAD ASSEMBLY (OLD)(p)

    BEATER HEAD ASSEMBLY (OLD)(p)

    Part No. PD137380

    $905.08
    • Old Style Prior to 1983
    • Commonly used on various Univex models such as M20 and where part is applicable.
    • provide serial number and date of manufacture at checkout

  31. BEATER HEAD ASSY.

    BEATER HEAD ASSY.

    Part No. PD137321

    $853.83
    • Commonly used on various Univex models such as SRM12, M12 and where part is applicable.

  32. BEATER HEAD ASSY.(p)

    BEATER HEAD ASSY.(p)

    Part No. PD137397

    $1,057.09
    • Beater Head Assembly
    • Commonly used on various Univex models such as SRM20, SRMF20, M20, BC18 and where part is applicable.

  33. BEATER HEAD GEAR PINION 1" HIGH

    BEATER HEAD GEAR PINION 1" HIGH

    Part No. PD28954.1

    $143.55
    • Gear Pinion
    • 16th tooth
    • 1" High
    • Commonly used on various Univex models such as SRM30+ and where part is applicable.
    • Please verify erial umber

  34. BEATER HEAD PINION GEAR ASSEMBLY

    BEATER HEAD PINION GEAR ASSEMBLY

    Part No. PD137250

    $165.50
    • Beater Head Pinion Gear
    • Commonly used on various Univex models such as SRM5, SRM8 and where part is applicable.

  35. BEATER HEAD PINION GEAR ASSEMBLY

    BEATER HEAD PINION GEAR ASSEMBLY

    Part No. PD137309

    $163.18
    • Beater Head Pinion Gear Assembly
    • Includes pinion gear, small retaining rings and woodruff key
    • Commonly used on various Univex models such as M12, SRM12 and where part is applicable.

  36. BEATER HEAD SHAFT

    BEATER HEAD SHAFT

    Part No. PD51399

    $245.99
    • length is 8-3/4"
    • OD is 1"
    • Commonly used on various Univex models such as SRM30+ and where part is applicable.

  37. BEATER HEAD SPACER

    BEATER HEAD SPACER

    Part No. PD38563

    $26.66
    • Commonly used on various Univex models such as SRM30+ and where part is applicable.

  38. BELT RETAINER ASSEMBLY

    BELT RETAINER ASSEMBLY

    Part No. PD137400

    $26.50
    • Commonly used on various Univex models such as SRM20, SRMF20, M20 and where part is applicable.

  39. BELT SET 20 QUART

    BELT SET 20 QUART

    Part No. PD53938

    $54.98
    • Commonly used on various Univex models such as SRM20 and where part is applicable.
    • Kit Contains 2 belts.
    • upper and lower

  40. BELT, (4L-340)

    BELT, (4L-340)

    Part No. PD33107

    $50.91
    • Belt
    • Commonly used on various Univex models such as M12, M20, M20A and where part is applicable.

  41. BELT, DRIVE, 1-13/16 x 73.4

    BELT, DRIVE, 1-13/16 x 73.4

    Part No. PD38742

    $326.50
    • Belt
    • Commonly used on various Univex models such as M60 and only where part is applicable.

  42. BEVEL GEAR

    BEVEL GEAR

    Part No. PD137260

    $213.78
    • Commonly used on various Univex models such as SRM5, SRM8 and where part is applicable.

  43. BEVEL GEAR SET SRM60

    BEVEL GEAR SET SRM60

    Part No. PD137632

    $774.03
    • Commonly used on various Univex models such as SRM60, SRM80 and where part is applicable.

  44. BEVEL GEAR, 37 Teeth (vetical shaft)

    BEVEL GEAR, 37 Teeth (vetical shaft)

    Part No. PD29298

    $443.33
    • Bevel Gear
    • 37 tooth gear
    • Vertical shaft
    • Commonly used on various Univex models such as SRM30 and where part is applicable.
    • Please specify serial number

  45. BEVEL GEAR, PINION ONLY (new style)

    BEVEL GEAR, PINION ONLY (new style)

    Part No. PD28989

    $210.68
    • New Style larger Gear
    • PTO Drive gear
    • Bevel gear
    • Commonly used on various Univex models such as SRM 30 , SRM30+ and where part is applicable.

  46. BEVEL GEAR, PINION ONLY (old style)

    BEVEL GEAR, PINION ONLY (old style)

    Part No. PD14455

    $319.04
    • Gear, Bevel
    • OLD Style Smaller Gear
    • 15 Teeth
    • Commonly used on various Univex models such as SRM30, M30 and where part is applicable.
    • Please specify serial number.

  47. BLADE SCRAPER

    BLADE SCRAPER

    Part No. PD14989.5

    $11.08
    • Blade Scraper
    • 3/4" X 1-3/4"
    • White
    • Has 20 degree bend with 2 each key hole slots
    • Commonly used on various Univex models such as 6509, 7510, 7512, 8510, 8512 and only where part is applicable.
    • Please verify serial number when ordering. If the words Boston, Boston by Univex appear any where on the slicer this part will not fit.

  48. BLADE SCRAPER BOLT

    BLADE SCRAPER BOLT

    Part No. PD138574

    $3.21
    • Commonly used on various Univex models such as 8512, 6509 and where part is applicable.

  49. BLADE, S/S

    BLADE, S/S

    Part No. PD215473

    $526.07
    • Commonly used on various Univex models such as 8512 and where part is applicable.

  50. BLOCK, B.L.CAM (M20, 30) (p)

    BLOCK, B.L.CAM (M20, 30) (p)

    Part No. PD137415

    $37.96
    • Commonly used on various Univex models such as M20, M30 and where part is applicable.

  51. BLOCK, CAM SRM30+ (p)

    BLOCK, CAM SRM30+ (p)

    Part No. PD137488

    $25.36
    • Commonly used on various Univex models such as SRM30+ and where part is applicable.

  52. BLOCK, LOCATING (p)

    BLOCK, LOCATING (p)

    Part No. PD137643

    $174.59
    • Commonly used on various Univex models such as SRM60, SRM80 and where part is applicable.

  53. BLOCKS BARRING GEAR

    BLOCKS BARRING GEAR

    Part No. PD139064

    $80.73
    • Commonly used on various Univex models such as 1000S, 1000M and where part is applicable.

  54. BOLT MOTOR, 5/16-18X4-1/2

    BOLT MOTOR, 5/16-18X4-1/2

    Part No. PD137806

    $2.17
    • Commonly used on various Univex models such as SRM60, SRM80 and where part is applicable.

  55. BOLT, CARR SS 1/4-20x3/4

    BOLT, CARR SS 1/4-20x3/4

    Part No. PD138330

    $2.42
    • Commonly used on various Univex models such as SRM12, SRM20, SRM30+, SRM60, SRM80, SRMF20 and where part is applicable.

  56. BOLT, HXHD 3/8-16 x 4-1/2 (p)

    BOLT, HXHD 3/8-16 x 4-1/2 (p)

    Part No. PD137812

    $3.19
    • Commonly used on various Univex models such as SRM60, SRM80 and where part is applicable.

  57. Bolt, hxhd 3/8-16x2-1/2

    Bolt, hxhd 3/8-16x2-1/2

    Part No. PD50660

    $3.19
    • Bolt, hxhd 3/8-16x2-1/2
    • Commonly used on various Univex models such as M60 and where part is applicable.

  58. BOWL CLAMP KIT

    BOWL CLAMP KIT

    Part No. PD52369

    $117.15
    • Bowl Clamp Kit
    • Kit Includes
      • (2) Clamps
      • (4) Washers
      • (4) Screws
    • Commonly used on various Univex models such as SRM30, SRM40 and where part is applicable.

  59. BOWL CLAMP, REAR

    BOWL CLAMP, REAR

    Part No. PD137586

    $244.39
    • Commonly used on various Univex models such as M60, SRM60 and where part is applicable.

  60. BOWL LIFT FRAME ASSEMBLY (SRM20)

    BOWL LIFT FRAME ASSEMBLY (SRM20)

    Part No. PD137316

    $559.71
    • Commonly used on various Univex models such as SRM20, SRMF20, M12, M20 and where part is applicable.

  61. BOWL LIFT FRAME ASSEMBLY, M30

    BOWL LIFT FRAME ASSEMBLY, M30

    Part No. PD137454

    $584.89
    • Commonly used on various Univex models such as SRM30+ and where part is applicable.

  62. BOWL LIFT FRAME ASSEMBLY, SRM12

    BOWL LIFT FRAME ASSEMBLY, SRM12

    Part No. PD137355

    $69.27
    • Yoke Bowl Lift
    • Commonly used on various Univex models such as SRM12 and where part is applicable.

  63. BOWL LIFT HARDWARE KIT

    BOWL LIFT HARDWARE KIT

    Part No. PD137317

    $53.54
    • Commonly used on various Univex models such as SRM20, SRM30+, SRMF20, M12, M20 and where part is applicable.

  64. BOWL LIFT HOUSING

    BOWL LIFT HOUSING

    Part No. PD39817.1

    $80.55
    • Commonly used on various Univex models such as M12, M20, SRM 30, SRM20, SRM30+, SRMF20 and where part is applicable.

  65. BOWL LIFT SAFETY SWITCH

    BOWL LIFT SAFETY SWITCH

    Part No. PD33710.1

    $18.59
    • Bowl Lift Safety Switch
    • Commonly used on various Univex models such as MG22, SRM12, SRM20, SRM30+, SRM60, SRM80, SRMF20 and where part is applicable.

  66. BOWL SUPPORT ASSEMBLY

    BOWL SUPPORT ASSEMBLY

    Part No. PD47610

    $1,487.70
    • Bowl Support Assembly
    • Used on Univex models SRM-80 and where part is applicable.

  67. BOWL SUPPORT KIT, SRM80

    BOWL SUPPORT KIT, SRM80

    Part No. PD137720

    $161.87
    • Commonly used on various Univex models such as SRM60, SRM80 and where part is applicable.
    • 2-1/8" length x 1/2" diameter

  68. BRACKET BOWL SWITCH

    BRACKET BOWL SWITCH

    Part No. PD41154

    $82.27
    • Commonly used on various Univex models such as SRM12 and where part is applicable.

  69. BRACKET, B.L. SWITCH

    BRACKET, B.L. SWITCH

    Part No. PD137698

    $28.02

     

  70. BRACKET, BELT RETAINER (p)

    BRACKET, BELT RETAINER (p)

    Part No. PD137473

    $26.28
    • Commonly used on various Univex models such as SRM30+ and where part is applicable.

  71. BRACKET, BOWL SWITCH (p)

    BRACKET, BOWL SWITCH (p)

    Part No. PD137418

    $8.07
    • Commonly used on various Univex models such as SRM20, SRM30+, SRMF20 and where part is applicable.

  72. BRACKET, LEFT GUARD SWITCH

    BRACKET, LEFT GUARD SWITCH

    Part No. PD215328

    $7.68
    • Guard Bracket
    • Switch
    • Commonly used on various Univex models such as SRM20, SRM30, SRM60 and where part is applicable.

  73. BRACKET, LOWER (SAFETY RING) (p)

    BRACKET, LOWER (SAFETY RING) (p)

    Part No. PD137366

    $15.86
    • Lower Bracket
    • Commonly used on various Univex models such as SRM12, SRM20, SRM30+, SRM60, SRM80, SRMF20, SRM40 and where part is applicable.

  74. Bracket, Pulley Swivel

    Bracket, Pulley Swivel

    Part No. PD30475

    $171.62
    • Pulley Swivel Bracket
    • Commonly used on various Univex models such as M20, M12, SRM20, SRM30+, SRMF20 and where part is applicable.

  75. Bracket, UPPER (SAFETY RING)(p)

    Bracket, UPPER (SAFETY RING)(p)

    Part No. PD137365

    $12.65
    • Commonly used on various Univex models such as SRM12, SRM20, SRM30+, SRM60, SRM80, SRMF20 and where part is applicable.

  76. BRKT, GEARBOX (p)

    BRKT, GEARBOX (p)

    Part No. PD137699

    $68.06

     

  77. BRKT, GUARD SWITCH

    BRKT, GUARD SWITCH

    Part No. PD215318

    $32.82
    • Commonly used on various Univex models such as SRM12 and where part is applicable.

  78. BRKT, MOTOR MT (M12C)(p)

    BRKT, MOTOR MT (M12C)(p)

    Part No. PD137339

    $78.37
    • Commonly used on various Univex models such as SRM12, M12 and where part is applicable.

  79. BRKT, S.C. BEARING (p)

    BRKT, S.C. BEARING (p)

    Part No. PD137717

    $59.14
    • Commonly used on various Univex models such as SRM60, SRM80 and where part is applicable.

  80. BUSHING, DU (10DU12)

    BUSHING, DU (10DU12)

    Part No. PD137607

    $16.48
    • Commonly used on various Univex models such as M60 and where part is applicable.

Items 1 to 80 of 633

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction
per page

Since we talk to so many operators we are in a unique position to help advise you on your particular problem and the correct replacement part you’ll need. The most common problem we find is the under sizing of the unit for a particular application. This puts undo stress on the machine and can lead to repair-downtime issues. Smaller units will be less expensive up front but will cost more in the long run if not the proper size for your need.

Planetary mixers are mixers that perform a wide range of mixing needs. They are very versatile and available for any size operation. There are 8 current models and numerous retired models which we specialize in the replacement parts for you. We also sell the complete units. For the standard needs of a small restaurant there is the SRM12 table top model. It handles 5 quarts of liquid and up to 14 pounds of pizza dough. They go up to the large floor model SRM80+ which will handle 30 quarts of liquid product and up to 80 pounds of heavy bread dough and thick pizza dough. Let us help you size the proper unit for you. (These capacities are maximum and listed as a guideline only. Depending on the flour and water type you use can affect the results. Dough levels are figured on 70-degree water and flour at 12% moisture.)

Spiral Univex mixers are considered professional grade mixers designed for high volume operations such as in pizzerias, commissaries, bakery shops and manufacturing food production facilities. They come in 2 different lines; the Silverline and Greenline.

The Silverline mixers are for extra-large capacity needs. These mixers range from 243 quart capacity and 350 pound finished dough in the SL160 model to 418 quart capacity and 660 pound finished dough with the SL300RB model. There are 9 models to choose form. The Greenline mixers range from 70 quart capacity and 110 pounds of finished dough with the GL50 and SL50 models to 180 quart capacity and 265 pound finished dough capacity with the GL120 and SL120 models. There are 7 Greenline mixer models to choose from.

We support all Univex replacement parts for new and vintage Univex mixers. Univex supports their products well. You don’t need to worry if the mixer you buy from a new importer will be around when you’ll need a replacement part or accessory. We have also been very successful in finding obsolete parts for these mixers. We carry switches, bearings, transmission belts, gears, brackets, shafts, motors, pulleys, you name it. If it goes on a Univex mixer we handle it.

Commercial Kitchen Equipment Parts and Cleaning Stuff © Copyright 2021 SupplyDIRECT, Inc. All Rights Reserved. Atlanta, Georgia