Universal Motors

16 Part(s)

Set Descending Direction
per page
  1. BELT DRIVE MOTOR

    Part No. PD48319

    $198.86
    • Drive Blower Motor
    • Sleeve bearing belt drive
    • 115V
    • 1 phase
    • 7.2A
    • 1725RPM
    • 1/2HP
    • Frame 48/56
    • Reversible rotation
    • Overload protection
    • 1/2 x 1-1/2" diameter shaft
    • Overall dimensions 10-1/2 x 6-1/2 x 6-1/2
    • AC motor, must be grounded.
    • Use where part is applicable.
  2. Condenser Fan Motor 5A

    Part No. PD46008

    $124.67
    • Condenser Motor
    • 5 watts
    • 115V
    • 60HZ
    • Single foot pad 
    • Neoprene silencer
    • Totally enclosed
    • Cast iron
    • CW rotation
    • 1/2" shaft length
    • 1/4 x 20 threaded shaft
    • 1/4 x 1/2 shaft length
    • Includes Lyall plug
    • UL and CSA approved
    • Fan blade not included
  3. EVAPORATOR FAN MOTOR, WITH FAN BLADES

    Part No. Pd56490

    $92.88
    • Commercial Replacement Evaporator Motor Kit
    • 7/8" stack dual voltage motor
    • 3/16" Shaft diameter
    • 110V/220V
    • 3000 RPM
    • .91/.45 amps
    • 1/55HP
    • Automatic thermal overload
    • Wire leads
    • Rotation-clockwise from shaft end
    • 6000XL Platform
    • Note-This is a replacement motor
    • Comes with fan blades:
      • 6" CW 4 pedal
      • 5-1/2" CCW 5 pedals
      • 5" CCW 5 pedal
  4. EVAPORATOR MOTOR 115 VOLT

    Part No. PD57069

    $204.19
    • Evaporator Motor
    • 115 Volt
    • 1550 RPM
    • CW - SE
    • 1/15 HP
    • Commonly used on various Heatcraft systems and where part is applicable.
  5. FAN MOTOR, CONDENSING, EVAPORATOR 115V

    Part No. PD46418

    $141.10
    • Fan Motor
    • Conderser-Evaporator 
    • 9 watt
    • 115V
    • 50/60HZ
    • 1/83hp
    • Full load 0.62 amps
    • 1550-1600 RPM
    • Cast iron
    • Pigtails, wiring 
    • Shaft threaded 1/4-20 x 1/2"
    • CW rotation
    • 3-1/2" body diameter
    • 2-13/16" bolt circle diameter
    • Mounting type: rear/foot
  6. Fan Motor, Evaporator CW

    Part No. PD50318

    $68.24
    • Fan motor
    • 115V, 0.53 amps
    • CW
    • 1550 rpm
    • Does not include fan blade
    • Wire leads
  7. FAN MOTOR,115V 60/50

    Part No. PD59847

    $85.97
    • Motor
    • 115V
    • Black
    • 60/50hz
    • 2.3 watt
    • Cast iron
    • Totally enclosed
    • Unit bearing fan motor
    • Furnished with a neoprene silencer, speed nut and mounting screws.
    • Rotation is determined by viewing opposite shaft end.
    • UL and CSA approved
    • 1/4 x 20 threaded shaft
    • Shaded Pole
  8. GENERAL PURPOSE MOTOR

    Part No. PD45244

    $459.59
    • Motor
    • General purpose
    • Single phase
    • 2 HP
    • 1725 RPM
    • 115/208-230 V
    • Open enclosure
    • 145T frame
  9. MOTOR BLIXER 15

    Part No. PD59402

    $3,142.80

     

  10. MOTOR, CENTRIGUGAL BLOWER

    Part No. PD24494

    $180.13
    • Centrifugal Blower Motor
    • 3100 RPM
    • Shaded Pole Blower
    • 0.72 Amps
    • 115 Volts
    • 60hz
    • 120 CFM
    • Thermally protected
    • UL recognized
    • CSA or ULc certified
    • Commonly used on SUPERSYSTEM modeL RSW-2-SE-RT and where part is applicable.
  11. MOTOR, CONDENSING FAN REPLACEMENT

    Part No. PD56438

    $114.21
    • Evaporator Motor
    • 3.3" diameter motor
    • 1/12 HP
    • 208-230V
    • 1550 RPM
    • 0.50A
    • CCW shaft end
    • Shaft dimensions 5/16 x 2-5/8"
    • Motor length less shaft 3-1/2"
    • Capacitor
    • Sleeve bearings
    • Stud mounting
    • Overload protection automatic
    • 1PH
    • 60HZ
  12. MOTOR, DRIVE, 208/240, CCW

    Part No. PD4168

    $136.84
    • MOTOR, DRIVE
    • Left hand
    • CCW
    • 208/240V
    • 1 Phase
    • 5.5 RPM
    • .310 shaft
    • 1-9/16 mount centers
    • Commonly used toasters and only where applicable.
  13. MOTOR, FAN U63 115V

    Part No. PD27216

    $204.44
    • RPM 1550
    • HP 1/20
    • 2.1 AMP
    • Rotation CWSE
    • Sleave Bearing
    • Shaft: 5/16 x 3"
    • The shaft might have to be cut in the field to accommodate your application
  14. Motor, Gear, Rounder

    Part No. PD59478

    $1,861.00
    • Drive Motor
    • Dough Rounder
    • 115V
    • Has gear box
    • Used on various Am Manufacturing models such as S302, S500, S502, R900, R900T and where part is applicable.
  15. Motor,1/3 HP, Direct

    Part No. PD40911

    $455.68
    • Exhaust hood motor
    • Direct Drive Blower Motor, Permanent Split Capacitor Open
    • HP 1/3, RPM 850
    • Number of Speeds 1
    • Voltage 115 V
    • NEMA Frame 48Y
    • Body Diameter 5-5/8 Inch
    • Service Factor 1.00
    • Frequency 60 Hz
    • Mounting Stud
    • Bearings Double Shielded Ball
    • Thermal Protection Automatic
    • Shaft Dimensions 5/8 x 3 Inch
    • Full Load Amps 4.2
    • Rotation CCW
    • Capacitor Included
  16. Replacement Motor with Vent Fan

    Part No. PD56473A

    $48.55
    • Vent Fan Motor
    • Replacement motor with plug
    • OEM style impeller
    • EM-550
    • VFM-100
    • 110V
    • Shaft length 1.5"
    • Flat side on shaft 3/4" long
    • .65 amps
    • CCW rotation
    • Nutone N65878

16 Part(s)

Set Descending Direction
per page