Kettle
-
700 Gas Safety - 120 VAC LP
Part No. PD42868
$1,046.16- 700 Gas Safety - 120 VAC
- Gas In 1/2" NPT
- Gas Out 3/4" NPT
- Gas Side 1/2" NPT
- BTU 240000
- with Slotted Thermocouple Magnet
- Used on various Southbend models such as KSLG-20, KSLG-40, KSLG-60 where part is applicable.
-
Air Vent Assy
Part No. PD21571.5
$135.09- Air vent assembly
- Commonly used on Southbend models such as: EC-10, EC-6, EL-100, EL-20, EL-30, EL-40, EL-60, EL-80, ELT-100, ELT-20, ELT-30, ELT-40, ELT-60, ELT-80, EP-100, EP-20, EP-30, EP-40, EP-60, EP-80, GLT-20, GLT-30, GLT-40, KECT-05F, KECT-10F and where applicable.
-
Contactor, 208-240V
Part No. PD35241.24
$654.90- Contactor
- 208/240V
- 3 pole
- 40 amp inductive
- 50 amp resistive
- Screw Terminals
- Used on various Southbend models such as EC-10, EC-6, ECTS-12, EL-100, EL-20, EL-30, EL-40, EL-60, EL-80, ELT-100, ELT-20, ELT-30, ELT-40, ELT-60, ELT-80, EP-100, EP-20, EP-30, EP-40, EP-60, EP-80, ETS-24, ETS-30, ETS-40, EZ18-3, EZ18-5, EZ24-3, EZ24-5, KECT-05F, KECT-10F, R18-4, R18A-4 and only where part is applicable.
-
CONTROL, THERMOSTAT
Part No. PD14543
$553.84- Thermostat
- 350 degrees F maximum
- SPST
- 24" capillary
- 125V
- Dipsealed G1
- 3/8" stuffing box
- 3/8 x 3-5/8" bulb
-
CONVERSION KIT - LP TO NAT
Part No. PD113935
$81.01- Pressure Regulator Kit
- Gas Conversion
- LP to Natural gas
- 3.5" W.C
- Kit provides straight-line regulation and includes all the necessary parts including instructions to convert a specific factory model gas valve.
- Use with Robertshaw valves such as 7000, 7010, 7100, 7200 and 7222.
- Use with Robertshaw 700 Series valves.
Not for use with hydraulic models which cannot be field converted.
-
ELEMENT ASSEMBLY
Part No. PD35243.24
$1,279.70- Immersion Element
- 208 V
- 12,000 KW
- 12" Long From Base
- 13" Overall
- 2-7/8" Screw Centers
- 3-7/8" Square Plate
- Used on various Southbend models such -6, KEL-20, KELT-100, KELT-20, KELT-30, KELT-40, KELT-60, KELT-80, KEP-100, KEP-20, KEP-40, KEP-60, KEP-80 and only where part is applicable.
-
ELEMENT, 4 KW 208V 3-PH
Part No. PD14548.1
$263.40- 208V
- 4000 watt
- 1 & 3-phase
- Commonly used on Southebend model KTLE-20, KTLE-40, KTLE-60
-
Element, Kettle
Part No. PD46229
$1,273.43- Kettle Element
- 220V
- 7500W
- Used on various Southbend kettles such as models EC-6, KECT-05F, KECT-10F and where part is applicable.
-
Fuse 1 Amp 600V, Time Delay
Part No. PD937878
$160.77- Fuse
- Time delay
- Extremely current limiting
- 1 AMP
- 600 Volts
- Used in Southbend and Crown equipment where applicable.
-
Gas Safety Valve 120V, Nat/LP
Part No. PDG11393
$292.50- Gas Safety Valve 120V, Nat/LP
- Gas In 3/4" NPT
- Gas Out 3/4" NPT
- BTU 300000
- with Slotted Thermocouple Magnet
- Use for Series: KSLG with Standing Pilot
-
GAS VALVE CONVERSION KIT - NAT TO LP GAS
Part No. PD113934
$46.99- Pressure Regulator Kit
- Gas Conversion, Nat to LP gas
- 11" WC adjustable to 12 WC
- For Robertshaw 700 Series valves 7000, 7010, 7200, 7222.
-
GAS VALVE, 700 SERIES NAT GAS
Part No. PD14534.5
$1,968.31- 700 Gas Safety - 120 VAC
- Gas In 1/2" NPT
- Gas Out 3/4" NPT
- Gas Side 1/2" NPT
- BTU 240000
- with Slotted Thermocouple Magnet
- Used on various Southbend models such as KSLG-20, KSLG-40, KSLG-60, X, XS ovens where part is applicable.
-
-
HANDLE S/S, For 1-1/2 and 2" Faucet
Part No. PD24109
$183.12- Draw Off Faucet Handle
- Stainless Steel
- Use for 1-1/2" and 2" valves
-
IGNITION MODULE 3 TRY
Part No. PD38928
$571.46- Ignition Module 3 TRY
- Must provide model & serial number.
- Cannot be used on Crown units.
- Commonly used on Southbend models: 171A, 171D, 234R, BGLM-30, BGLM-40, P18N-F, P32A-XX, P32D-171, P32D-3240, P32N-BBB, P32N-CC, P32N-GRAD, P32N-HH, P32N-PPP, P32N-TT, P36A-BBB, P36A-BBB-SU, P36A-GGG, P36A-HHH, P36A-TTT, P36A-XX, P36C-BBB, P36C-BBB-SU, P36C-GGG, P36C-HHH, P36C-TTT, P36C-XX, P36D-BBB, P36D-BBB-SU, P36D-GGG, P36D-HHH, P36D-TTT, P36D-XX, P36N-BBB, P36N-BBB-SU, P36N-GGG, P36N-GRAD, P36N-HHH, P36N-TTT, P36N-XX, P48C-BBBB, P48W-CCCC and where part is applicable.
If model and serial number are not provided or unit has been installed then the unit is non-returnable per the factory. Enter model and serial number in comment box at check out.
-
Kettle Draw-Off - 1-1/2"
Part No. PDG11664
$1,112.09- Kettle Draw-Off Faucet
- 1-1/2" Stainless Steel (No Threads)
- Comes stainless stee handle
- This Valve must be brazed to unit.
-
Kettle Draw-Off Valve - 2" SS, No Handle
Part No. PDG11659
$3,917.54- Kettle Draw-Off Valve
- 2" Stainless Steel
- No handwheel
- Use for KSLD, KSLE, KSPD, KTLE
- This Valve must be brazed to unit.
-
Kettle Draw-Off Valve 3" S/S
Part No. PDG11098
$1,338.62- Kettle Draw-Off Valve
- 3"
- Stainless Steel
- This Valve must be brazed to unit.
-
Liquid Level Control no Bracket *
Part No. PD33980.24
$859.57- Relay Water Control
- (1D2D0, 240V)
- 50/60HZ
- Warrick
- Used on various Southbend models such as EC-10, EL-100, EL-20, EL-30, EL-40, EL-60, EL-80, ELT-100, ELT-20, ELT-30, ELT-40, ELT-60, ELT-80, EP-100, EP-20, EP-30, EP-40, EP-60, EP-80, KECT-05F, KECT-10F and only where part is applicable.
-
LOW WATER CUT-OFF
Part No. PD23931
$885.12- Low Water Cut Off
- Circuit board
- Level controller
- Commonly used on Southbend kettles where part is applicable.
-
Strainer, Kettle Faucet
Part No. PD25165
$442.05- Use for 2" draw off faucet
- Perforated
- Stainless Steel
-
Temp Control Board W/Pot 120V
Part No. PD36322
$1,131.69- Temperature Control Board
- Includes potentiometer
- 120V
- Used on various Southbend models such as BGLM-40, GMTS-30,GMTS-40,GLTS-30,GLTS-40 and only where part is applicable
-
Thermocouple (Lead, 48)
Part No. PD235674
$390.83- Thermocouple Lead
- Length 48"
- Used on various Southbend models and only where part is applicable.
-
THERMOSTAT, 140-284 F
Part No. PD32769.1
$469.58- 3/8" x 4" Bulb
- 48" Capillary
- 3/8 MPT x 3/8 CC Fitting (stuffing box)
- Used on various Southbend models such as EL-100, EL-20, EL-30, EL-40, EL-60, EL-80, ELT-100, ELT-20, ELT-30, ELT-40, ELT-60, ELT-80, EP-100, EP-20, EP-30, EP-40, EP-60, EP-80, KECT-05F, KECT-10F and where part is applicable
-
THERMOSTAT, READY
Part No. PD31074
$453.74- Used on various Southbend models such as R2, electric steam kettle, and where part is applicable.
-
VALVE ASSY, 1 1/2`` DRAW OFF
Part No. PD937193
$1,706.87- Draw Off Valve Assembly
- 1-1/2"
- Commonly used on various Southbend Range models and only where part is applicable.
-
VALVE, SOLENOID
Part No. PD33777.1
$1,217.34- Valve Solenid
- Commonly used on SOUTHBEND models such as: SEZ-3, SEZ-3-SN1, SEZ-5, SEZ-5-SN1 and where applicable.
-
Water Level Probe
Part No. PD33981.24
$224.13- Water Level Probe
- Commonly used on Southbend models such as CSC-24, CSC-36, EC-10, EC-6, EL-100, EL-20, EL-30, EL-40, EL-60, EL-80, ELT-100, ELT-20, ELT-30, ELT-40, ELT-60, ELT-80, EP-100, EP-20, EP-30, EP-40, EP-60, EP-80, KECT-05F, KECT-10F and where part is applicable