1+404-794-8110 / USA 800-366-9709
800-366-9709
Browse By

Filter

Category
  1. Grating Plates
  2. Julienne Plate
  3. Screws; Blade and Plate Fasteners
  4. Slicing Plates, Double Bladed
  5. Slicing Plates, Double Bladed Waved Edge
  6. Slicing Plates, Single Blade
  7. Slicing Plates, Single Blade Waved Edge

Slicing Plates, Single Blade

Slicing Plates, Single Blade

10 Part(s)

Set Descending Direction
per page
  1. 2MM Blade Only, straight edge

    2MM Blade Only, straight edge

    Part No. PD162285

    $64.20
    • Commonly used on Old Style Robot coupe models: R4, R4C, R4N, R4P, R4S, R4X
    • Units had rotary or toggle switch on front of unit
    • Center hole of shaft is round shaft with 2 slots

  2. 2mm Slicing Plate

    2mm Slicing Plate

    Part No. PD162528

    $315.74
    • Commonly used on Old Style Robot coupe models: R4, R4C, R4N, R4P, R4S, R4X
    • Units had rotary or toggle switch on front of unit
    • Center hole of shaft is round shaft with 2 slots

  3. BLADE, REPLACEMENT ONLY, 1.5 mm

    BLADE, REPLACEMENT ONLY, 1.5 mm

    Part No. PD2595810

    $44.33
    • Blade only
    • 1.5 mm
    • Size-3/16" Slice
    • For slicing plates from 1mm to 19mm
    • Curved edge, smooth (not waved)
    • Some plates require 2 blades
    • Always replace both blades on 2 blade plates to help keep balance and reduce stress on unit.
    • Used on various Robot Coupe models such as CL 50, CL 50-D, CL 52, CL 52-D, CL 60-D, CL-50, CL-52, R4N, R4X, R6N, R6VN-D, R6X and where part is applicable.

  4. BRUNOISE 4MM SLICING DISC

    BRUNOISE 4MM SLICING DISC

    Part No. PD44652

    $307.97

     

  5. Slicing Plate Series D, 10 mm 3/8"

    Slicing Plate Series D, 10 mm 3/8"

    Part No. PD163210

    $248.31
    • Slicing Plate
    • 10mm
    • 3/8" slice
    • Straight blade (not curved)
    • For use with dicing grid only
    • Series D dice machines only
    • Commonly used on Robot Coupe models such as CL-50, CL-52, CL-55, R502E, R602V E

  6. SLICING PLATE, 10 mm, 3/8"

    SLICING PLATE, 10 mm, 3/8"

    Part No. PD28139

    $238.02
    • Slicing Plate
    • 3/8"
    • 10mm slice
    • For machines with round shafts
    • When using with Dice Grid, use with 8mm, 10mm, 14mm Dice Grids
    • Used on various Robot Coupe models such as: CL50, R4N, R4X, R6N, R6X, R6V, CL55, CL60 and where part is applicable.
    • For Series D machines and Non Series D Dice Grids

  7. SLICING PLATE, 14 mm 9/16"

    SLICING PLATE, 14 mm 9/16"

    Part No. PD1653210

    $238.02
    • Slicing Plate
    • 9/16" slice
    • 14mm
    • Also for 10 mm, 14mm, 20mm Dice Grids on models: R4N, R4X, R6N, R6X, R6VN, CL50D, CL52D, CL55D, CL50, CL60
    • For Series D machines and Non Series D Dice Grids

  8. SLICING PLATE, 5 mm 3/16"

    SLICING PLATE, 5 mm 3/16"

    Part No. PD16535

    $238.02
    • Slicing Plate
    • 5mm
    • 3/16 slice
    • 7.5  " diameter, 19MM
    • Single blade, curved
    • Aluminum
    • This plate will fit these machines only if the machine has a round shaft.
    • Used on various Robot coupe models such as CL50, CL55, CL60, R4N, R4X, R6N, R6VC, R6VN, R6X and only part is applicable.

  9. SLICING PLATE, 5/32" 4MM

    SLICING PLATE, 5/32" 4MM

    Part No. PD16545

    $238.02
    • 5/32 slice
    • Single blade plate
    • The following plates will fit these machines only if the machine has a round shaft. For models CL50, CL55, CL60, R4N, R4X, R6N, R6VC, R6VN, R6X

  10. SLICING PLATE, 8 mm 5/16"

    SLICING PLATE, 8 mm 5/16"

    Part No. PD1653410

    $298.77
    • slicing plate
    • 5/16" (8 mm) cuts
    • This plate will fit these machines if the machine has a round or hexagonal shaft
    • Used on various Robot Couppe models such as CL50, CL55, L60, R4N, R4X, R6N, R6VC, R6VN, R6X and only where part is applicable.

10 Part(s)

Set Descending Direction
per page
Commercial Kitchen Equipment Parts and Cleaning Stuff © Copyright 2021 SupplyDIRECT, Inc. All Rights Reserved. Atlanta, Georgia