Sani-Serve
-
Agitator assembly
Part No. PD41863
$233.58- Agitator assembly, modified
- New style
- Used on Sani Serv model 401
-
ASSEMBLY, SEAL REAR PBT
Part No. PD12486
$63.11- Rear Seal PBT
- Use on various on Sani-Serve models such as 424N, 401, A401E, and where part is applicable.
-
ASSY LH JACKSHAFT(SHORT)
Part No. PD44123
$208.15- Used on various Sani Serve models such as 527, and where part is applicable.
-
ASSY RH JACKSHAFT(LONG)
Part No. PD44122
$208.15- Used on various Sani Serve models such as 527, and where part is applicable.
-
-
BELT
Part No. PD27054
$84.17- Belt for Pulley
- Commonly used on model 707 and where part is applicable.
-
BELT POLY-V
Part No. PD54539
$120.40- V Belt, Ploy
- Use on various Sani-serv models such as: 401 and where part is applicable.
-
Belt, Poly-V
Part No. PD51635
$65.27- 5/8" x 1/8"
- Used on various Sani Serve models such as 407, and where part is applicable.
-
BLADE, SCRAPER 6-1/2"
Part No. PD42640
$48.78- Scraper blade
- 6-1/2"
- Use on various Sani Serve models such as: A401, A401E, A798 and where part is applicable
-
CLEANER, STERA-SHEEN GREEN, 4 PACK
Part No. PD125534
$188.26- Green Label Sanitizer & Cleaner
- Sold 4 Jars/Case
- Each Jar = 4 lbs
- STERA-SHEEN GREEN LABEL THE MOST EFFICIENT SANITIZER AND CLEANER
- STERA-SHEEN provides thorough sanitizing and cleaning in only one procedure.
- With STERA-SHEEN, there is no need for separate procedures to clean, delime, and remove milkstone from your machine and parts. This saves additional labor and cleaning materials.
- STERA-SHEEN will simplify your operations, cut costs, and provide quality assurance.
- FOOD SAFETY IS YOUR BIGGEST CONCERN — STERA-SHEEN HAS THE ANSWER
- STERA-SHEEN provides the highest quality sanitizing and cleaning in one operation.
- Equipment properly cleaned and sanitized by STERA-SHEEN will meet and exceed local and federal health agency standards.
- STERA-SHEEN leaves no toxic residue.
- STERA-SHEEN is FDA approved and is an EPA-registered sanitizer.
- PREVENTIVE MAINTENANCE FOR YOUR MACHINE BEGINS WITH STERA-SHEEN
- STERA-SHEEN will help preserve the life span of a machine and its normal wear parts (o-rings, check bands, boot seals, gaskets, beater blades).
- Clean and properly functioning parts will promote an efficient machine that consistently provides a high-quality product.
- A STERA-SHEEN solution is noncorrosive and will not stain or damage metal, plastic, glass, or rubber.
- STERA-SHEEN PROVIDES THE FOLLOWING CLEANING CHARACTERISTICS THAT ENSURES PROPERLY SANITIZED MACHINES, NEW OR OLD.
STERA-SHEEN contains:- Excellent water softeners to ensure thorough cleaning and soil removal (even in very hard water).
- Emulsifiers to remove and break down fat particles and oils.
- A sequestering agent to remove milkstone and hard water mineral deposits.
- Chemicals that disperse and suspend soil particles to provide a clean surface upon draining.
- FDA & EPA approved as a final rinse sanitizer
-
-
DASHER MOTOR, 115V
Part No. PD44118
$972.67- Dasher Motor
- 1/2hp
- 1725/1425rpm
- Used on various Saniserv models such as 707, A707A and where part is applicable.
This part is serial number driven. If serial number not provided at checkout then part is non-returnable.
-
DRIP TRAY BRACKET LONG
Part No. PD56734
$93.51- Drip Tray Bracket Long
- Kit
- 16-7/16" x 6-3/4" x 1-1/4"
- Use on various Sani-serve models: 401 and where part is applicable
-
DRIP TRAY KIT
Part No. PD48211
$108.70- Drip Tray Kit
- W/ Screen
- Black
- Used on various SaniServ models such as DF-100, DF-200 and where part is applicable.
-
Drip Tray Retro Kit
Part No. PD51848
$174.14- Includes Drip Tray Retrofit Frame, Bar, Mounting hardware and drip tray
- Commonly Used on Saniserve Models: 407E
-
DRIVE,MAGNETIC
Part No. PD44125
$231.80- Used on various Sani Serve models such as 527, and where part is applicable.
-
Fan Blade
Part No. PD60001
$56.08- Use on various Sani-Serv models such as: 401, and where part is applicable.
-
FAN MOTOR, 230V
Part No. PD11823
$387.89- 1500 RPM
- 230 Volt
- 1/15 HP
- Use on various Saniserve Models such as: A6241E, 424N, and where part is applicable.
-
-
Front Cover Kit, Plastic
Part No. PD25510
$201.51- Front plate Kit
- Soft Serve
- Includes O-Rings
- Used on Various Sani-Serv models such as 407, 4071N, 414, 424N, 401 Series and where part is applicable.
-
-
-
Handle, Kit Applebees
Part No. PD55073
$114.08- Handle Kit
- Applebees
- Use on various Saniserv models such as: 414W, A4071-E and where part is applicable.
-
IDLER ARM ASSY
Part No. PD66095
$237.55- Use on various Saniserv models such as: A707 and where part is applicable.
-
IDLER SPRING, BLUE
Part No. PD66097
$9.25- Use on various Saniserv models such as: A707 and where part is applicable.
-
IDLER TORQUE ASSY
Part No. PD66096
$211.90- Use on various Saniserv models such as: A707 and where part is applicable.
-
KIT, CARB TUBE 401 (1 PC)
Part No. PD42639
$144.11- Commonly used on Sani models: A401E
- Over all Length is 8-3/8"
-
-
KIT, SEAL/BEARING/INSTRCT
Part No. PD44124
$451.52- Used on various Sani Serve models such as 527, and where part is applicable.
-
KIT:DRIP TRAY/INSERT LONG
Part No. PD42641
$108.70- Use on various Sani Serve models such as: A401E, 401, A798, and where part is applicable
-
KNOB (THUMB SCREW)
Part No. PD37320
$22.23- Knob
- Black plastic
- 1-7/8" diameter
- Commonly used on Sani-Serv models: 401, 407
-
-
-
-
Motor, Gear, 208-230v
Part No. PD41862
$241.30- Gear motor
- 208-230v
- 1ph
- Used on various Sani Serve models such as 527, 401, and where part is applicable.
-
-
O RING, 5"
Part No. PD11731
$22.01- O-Ring
- 5" Diameter
- Use on various Saniserve Models such as: 424N, 401, and where part is applicable.
-
O-RING 2-212
Part No. PD42601
$5.82- O Ring
- 1" diameter
- Use on various Sani Serv models such as: 401, A798, and where part is applicable
-
-
-
-
PLUNGER
Part No. PD56720
$162.11- Use on various Sani Serve models such as: A798, and where part is applicable
-
SCRAPER BLADE
Part No. PD50434
$137.42- White plastic
- 7-5/8 x 1"
- 'Commonly used on Sani-Serve models: A5223P, 522H, 522J
-
-
-
SHAFT & BEARING KIT LH
Part No. PD28847
$389.59- Bearing Seal Kit
- Use on various Sani Serve models such as A4141J, 401, 414W, 527 and where part is applicable.
-
SPRING TENSION, BROWN
Part No. PD66098
$14.75- Use on various Saniserv models such as: A707, A4071-E and where part is applicable.
-
STATOR ROD
Part No. PD50369
$91.14- 11" long
- White plastic
- Commonly used on Sani Serve models: A5 22 3 P
-
-
Stator Rod
Part No. PD51849
$92.76- Stator Rod
- 6-3/4" Long
- Commonly used on Sani-serve Models such as 407E and where part is applicable.
-
STATOR ROD
Part No. PD52102
$73.01- Stator Rod
- Plastic
- Approx 15 1/2" in length, offset is approx 1 1/2" from bottom to top of offset
- Used on various SaniServ models such as A4243M, 401 series and where part is applicable.
-
STIRRER MOTOR 115V
Part No. PD45166
$270.72- Stirrer motor
- 115V
- 1 phase
- 60Hz
- AKA:
- Agitator motor
- Gear motor
- Commonly used on various SantiServe models such as 407 and where part is applicable.
-
-
Torque Switch (micro)
Part No. PD52057
$60.23- Micro switch on belt tensioner
- Used on Various Sani-Serv Models Such As: A707A, and where part is applicable.
-
-
TUNE UP KIT, SANISERV
Part No. PD12768
$145.37- Commonly used on Sani-Serv models such as/ 401, 601, 708E and where part is applicable.
-
TUNE UP KIT,SANISERV
Part No. PD61255
$145.37- Tune Up Kit
- Used on Various Saniserv models such as:
- 407E,DF-200
- and where part is applicable