Rotisserie Cooker Parts
-
Baso Safety, Millivolt
Part No. PD45984
$177.96- Gas Safety Valve
- 1/2 PSI
- Width 4-1/4"
- Millivolt
- 122,000 BTU
- 1/4" CCT Pilot In / Out
- 3/8" NPT Gas In / Out
- Manual Shut-Off Valve
- Works With Natural Gas Or Liquid Propane
- Commonly used on various Hickory models such as N/45WDG, N/45WDG PLUS, N/5G, N/7G, N/9G and only where part is applicable.
-
BEARING, PILLOW BLOCK - 5/8"
Part No. PD126714
$89.06- Pillow Block Bearing
- 5/8" with Set Screw
- Grease fitting
- Used in the following Rotisserie Cookers :
- Attias
- Esquire
- Jade
- Old Hickory
- Vulcan-Hart
-
COLLAR, SPIT - 1/2"
Part No. PD126704
$12.10- Collar, Spit, 1/2"
- (For item PD126703, spit with handle)
- Used in:
- Attias
- Esquire
- Jade
- Old Hickory
- Vulcan-Hart
-
Cover, Light Bulb, Glass
Part No. PD126715
$58.67- Cover, Light Bulb
- Glass
- 7" Diameter
- Used in:
- Attias
- Esquire
- Jade
- Old Hickory
- Vulcan-Hart
-
FIBER GEAR 20 TOOTH
Part No. PD126713
$88.66- Gear, Fiber
- 20 Teeth
- For Main Shaft
- 1-5/16 OD x 5-16" ID
- Includes 2 set screws, 1/4-20 x 1/4" SOC set-cup
- Used in:
- Attias
- Esquire
- Jade
- Old Hickory
- Vulcan-Hart
-
GEAR, ALUM WORM -MOTOR
Part No. PD126712
$65.71- Gear Worm (For Motor)
- Used in:
- Attias
- Esquire
- Jade
- Old Hickory
- Vulcan-Hart
-
GEAR, BRASS WORM - MAIN SHAFT
Part No. PD126711
$68.83- Gear, Worm (For Main Shaft)
- 1-7/16" x 5/16" ID
- Used in:
- Attias
- Esquire
- Jade
- Old Hickory
- Vulcan-Hart
-
GEAR, HARD BLACK PLASTIC 30T W/SET SCREW
Part No. PD126705
$68.83- Gear
- Hard Black Plastic
- 30T
- with set screw pin
- Use for spit
- 3" OD x 1/2" ID
- Replacement gear is a Hard Black Plastic Gear with set screw (For item #PD126703)
- Used in:
- Attias
- Esquire
- Jade
- Old Hickory
- Vulcan-Hart
- Original gear, was Anodized Aluminum.
-
-
Oil Lite Bushing
Part No. PD52375
$25.00- Brass bushing that spit rides in
- 1/2" x 1/2" x 1/2"
- Used on various Hickory / Ole Hickory models such as: N/45WDG, 45WD, 45, N45.
-
RADIANT, CERAMIC, SINGLE SIDED
Part No. PD126699
$57.19- Ceramic Radiant
- Single Sided
- 8-1/8" H x 3" W x 1-1/8" D at top
- 1-3/4" D at bottom
- Used in:
- Attias
- Esquire
- Jade
- Old Hickory
- Vulcan-Hart
-
RADIANT, CERAMIC- DOUBLE SIDED
Part No. PD126700
$53.54- Ceramic Radiant
- Double Sided
- 8-1/4" T x 2-7/8" W
- 1" thick at top
- 1-5/8" at bottom thick
- Used in:
- Attias
- Esquire
- Jade
- Old Hickory
- Vulcan-Hart
-
Roll pin 1/8 x 1/2 Stainless Steel
Part No. PD56427
$0.38- Roll Pin
- Used on Oil lite bushing PD52375
- Oil lite bushing is either crimped or uses a rolled pin
- 1/8 x 1/2
- Stainless steel
- Used on various Hickory / Ole Hickory models such as: N/45WDG, 45WD, 45, N45. Older models are crimped, newer models use the pin.
-
SCREW, THUMB - 1/4"
Part No. PD126710
$6.48- Thumb Screw 1/4" (For PD126706, PD126707)
- Used in:
- Attias
- Esquire
- Jade
- Old Hickory
- Vulcan-Hart
-
SKEWER, DOUBLE, STAINLESS STEEL
Part No. PD126707
$28.68- Skewer, Double
- Stainless Steel
- 2-3/4" spaced
- 3-1/2" long prongs on both sides
- 7-1/4" total length
- 1/2" hole
- Used in:
- Attias
- Esquire
- Jade
- Old Hickory
- Vulcan-Hart
- Includes wing bolt thumb screw, 1/4"-20 SS
-
SKEWER, SINGLE, STAINLESS STEEL
Part No. PD126706
$24.84- Skewer, Single
- Stainless Steel
- 2-3/4" spaced
- 3-1/2" long prongs
- 1/2" hole
- Used in:
- Attias
- Esquire
- Jade
- Old Hickory
- Vulcan-Hart
- DOES NOT INCLUDE THUMB SCREW (ITEM #PD126710)
-
Spit w/Plastic Handle-1/2" x 44", S/S
Part No. PD126703
$307.23- Spit With Plastic Handle — 1/2" x 44", S/S
- Used in:
- Attias
- Esquire
- Jade
- Old Hickory
- Vulcan-Hart
- PROVIDE MODEL AND SERIAL NUMBER OF UNIT WHEN ORDERING