Rethermalizer
-
-
Contactor - 24V
Part No. PD111295
$327.60- Contactor
- 3 Poles
- Coil 24 Voltage
- Inductive Rating 30 Amp
- Resistive Rating 40 Amp
- 2-1/4" Width
- 4" Height
- 2-7/8" Depth
- Use for Pitco models E12, E14, E14B, E14X, E18, E18B, E7, E7B, ME2, MEII, PE14D, PE14L, RTE14, RTE14S & RTE14S-2(Taco Bell), SE14, SE147, SE148X, SE14R, SE14T, SE14TR, SE14TX, SE14X, SE18, SE18R, SE18S, SE714, SEBNB14, SEBNB18, SEH50, SFSE14, SFSE14R, SFSE14T, SFSE14TR, SFSE14TX, SFSE14X, SFSE18, SFSE18R, TurboFry 2000 and where part is applicable.
-
CONTROL, WATER LEVEL 120V
Part No. PD129502
$191.70- Water Level Control - 120V
- Use for RTG14, RTG14(Taco Bell)
-
Digital Controller Pasta
Part No. PD129501
$1,419.30- Digital Controller
- 24V
- 6" X 9" Plate With 3" X 4-3/4" Pc Board
- Commonly used on Pitco models such as: PE-14D, PE14D, PG-14D, SRTE14, SRTE14S, RTE14, RTE14TB, RTG14, RTG14TB, RTG18 and where applicable.
-
DISPLAY, TEMPERATURE CONTROL 24V
Part No. PD129496
$655.20- Temperature Control Display
- 24V
- Limit set at 195° and will cycle at 197°
- 3-1/3 x 1-1/4 face dims
- 3 x 2-1/2 x 1-1/4 overall box dims
- Used on Pitco rethermalizer
- Commonly used for RTE14S & RTE14S-2(Taco Bell), RTG14(Taco Bell).
- Also used on some Magikitch'm units where applicable.
-
Filter
Part No. PD111330
$270.90- Filter
- Line Strainer 3/8" NPT
- Use for RTEM14, RTG14, RTG14(Taco Bell)
-
Fuse - 2 AMP
Part No. PD111085
$30.00- Fuse AGC 250V/2A
- Size 1/4" x 1-1/4"
- Use for RTE14, RTE14S & RTE14S-2(Taco Bell), RTG14
-
Fuse, 1 AMP
Part No. PD111269
$30.00- Fuse
- AGC
- 250V
- 1A
- Size 1/4" x 1-1/4"
- Fast acting
- Use for models RTG14, RTG14(Taco Bell), RTG18 and where part is applicable.
-
GAS VALVE 24V
Part No. PD111074
$288.00- 700 Series Gas Safety Valve
- 24 VAC or 12 VDC actuator
- Gas In 1/2" NPT
- Gas Out 1/2" NPT
- BTU 300000
- The valve is factory set at 3.5? WC natural gas
- The 3/4" valve come with 3/4" x 1/2" reducer bushings (Except PD113925 & PD113920 which come with 1/2" x 3/8" Reducer Bushings PD113917, PD113924 & PD113919 which include no bushings.
- Use for models RTG14, RTG14(Taco Bell), PG-14D
- (Also use item number PD46277 for LP use)
-
-
Hi-Limit Adaptor, Radix Wire
Part No. PD110974
$155.70- Hi-Limit Adaptor Only
- Radix wire
- Eye hook terminal connectors
- Use for models such as 18, 18S, 35C+, 45C+, BK-SG14RS-PCFM, DD24RUFM, RTG14, RTG14(Taco Bell), SFSG14, SFSG14C-S, SFSG14R, SFSG14RS, SFSG14S, SFSG14T, SFSG14TS, SFSG18, SFSG18S, SG14, SG14DI, SG14R, SG14RDI, SG14RS, SG14S, SG14SD, SG14T, SG14TDI, SG14TS, SG18DI, SG18F, SG18S, SG18SD, SGC, SGF18, SGM1824, SGM24, SGM34, SRTG14, SSH55, SSH60, SSH60C-S/FD, SSH60W/C-S/FD, SSH75RS and only where applicable.
-
LB Hi-Limit 250F Fixed
Part No. PDG11583
$285.30- LB Hi-Limit With Stuffing Bx, 1/4 Nickel & Manual Reset
- Fixed Temp 250 F
- Cap Length 24"
- Bulb 1/4" x 5-1/4" Nickel
- Used on various Pitco models such as PE-14D, PE14D, PG-14D, SRTE14, SRTE14S, SSPG, SSPG14 and where part is applicable.
-
On/Off White Rocker
Part No. PD111313
$90.90- On/Off White Rocker
- 10A-250V/15A-125V
- Terminal 2
- Terminal Size 1/4"
- Use for RTE14, RTE14S & RTE14S-2(Taco Bell), RTG14, RTG14(Taco Bell)
-
Pilot Burner - Nat/LP, 1/4" CCT
Part No. PD111211
$147.60- Gas Type Nat/LP
- Size 1/4" CCT
- Hood width 1 1/2"
- 3 way flame pattern
- Used on various Pitco models such as RTG14, RTG14(Taco Bell) 18, 18S, 35C+, 45C+, P-18
-
PROBE - TEMP SENSING
Part No. PD129939
$331.20- Probe, Temperature Sensing
- 3/16" X 4" sensor
- 9" Leads
- 1/8" Mmale pin for white terminal block
- 316 ss parker fitting 1/4" MPT X 3/16" CCT
- 2 pin white shap-in terminals block connector
- Used on various Pitco models such as RTE14, RTE14S & RTE14S-2(Taco Bell), RTG14, RTG14(Taco Bell) and only where part is applicable.
-
RELAY - 120V
Part No. PD129747
$164.70- Relay
- 120 V AC
- Used on various Pitco models such as RTE14, RTE14TB, RTG14, RTG14TB and only where part is applicable.
-
-
-
SOLENOID VALVE, WATER, DIAPHRAGM
Part No. PD111331
$768.60- Solenoid Valve - 120V, 3/8" NPT Water Fill
- Normally Closed
- 10 PSI
- Use for RTG14, RTG14(Taco Bell)
-
Thermopile 36" Coaxial
Part No. PD18969.3
$108.90- Thermopile
- 36" Coaxial
- 250-750 Millivolt
- Threads 3/8" - 32
- Commonly used on various Pitco models such as 1GRC35, 1GRC45, 1GRC65, 1GRD45, 1GRD65, 1GRS35, 1GRS45, 1GRS65, 3GR45MF, 35C, 35C+, 45C+, FM35, GHF91E, GHF91G, GHF92E, GHF92G, GR35F, GR45F, GR65F, GR85F, GRC35F, GRC45F, GRC65F, GRC85F, GRD35F, GRD45F, GRD65F, GRD85F, GRS35F, GRS45F, GRS65F, GRS85F, MJ35 and where part is applicable.
-
Transformer
Part No. PD111272
$174.60- Transformer
- Primary 120/208/240 V AC
- Secondary 24V AC
- 40 VA
- 2 mount holes on 3" centers
- (7) 3/16" tabs
- Exposed coil
- 5 & 10 Amp
- Used on various Pitco models such as 12MCD, 14BIF, 14R, 14UFM, 18BIF, 18UFM, 18WKS-UFM, 24R-UFM, 24RUFM, 7-2WKS, 7-2WKSUFM, 7-3WKS, 7-3WKSUFM, 7-4WKS, 7-4WKSUFM, AG14S, AG14S-C, CPF65, CRTE, DD-24RUFM, ME14, ME14S-C/MFD, MG14, MG14S, MG14S-C/MFD, PG-14D, PG14D, PM14, PPG14D, PR14, RS14D, RTE14, RTE14S, RTE14S-2, RTE14TB, RTG14, RTG14TB, TH-CRTE and only where part is applicable.
-
VALVE,CHECK 3/8 LF BRASS
Part No. PD111322
$286.20- Anti-Siphon Valve
- 3/8" NPT
- Use for RTE14, RTE14S & RTE14S-2(Taco Bell), RTG14, RTG14(TacoBell)
-
Washer, Shoulder #10 Nylon
Part No. PD211408
$30.00- Washer
- Water Shoulder
- Flat Nylon
- Commonly used on various Pitco models and where part is applicable.
-
Washer, Water Probe Flat Nylon
Part No. PD211407
$30.00- Washer
- Water Probe
- Flat Nylon
- Plastic
- .2" Id X .45" Od, .030" Thick
- Commonly used on various Pitco models and where part is applicable.