R4Y Series A
-
BASE BOLT WITH WASHER
Part No. PD20526
$8.13- Used on various Robot Coupe models such as R4X and where part is applicable.
-
Base, Metal
Part No. PD162042
$579.41- Used on various Robot Coupe models, such as: R4N Series A, R4N Series D, R6N Series A, R6N Series D, R6VN Series A, R6VN Series D, R4C Series A, R4C Series D, R4X Series A, R4X Series D, R6C Series A, R6C Series D, R6VC Series A, R6VC Series D, R6X Series, and where part is applicable.
- NOT USED FOR THE R6X Series D
- Used on various Robot Coupe models, such as: R4N Series A, R4N Series D, R6N Series A, R6N Series D, R6VN Series A, R6VN Series D, R4C Series A, R4C Series D, R4X Series A, R4X Series D, R6C Series A, R6C Series D, R6VC Series A, R6VC Series D, R6X Series, and where part is applicable.
-
BEARING, MOTOR TOP BEARING
Part No. PD30687
$55.04- Motor Top Bearing
- Used on various Robot Coupe models such as Blixer 5V, Blixer 6V, R4N, R4X, R4Y, R6N, R6VN, R6X, R6Y, R8, R8U and only where part is applicable.
-
BEARING, TOP OR BOTTOM, SEALED 6204
Part No. PD1100950
$62.84- (For the A O Smith motors only). Sealed Bearing
- 1-9/16 diameter x 11/16 x 7/16"
- Top or bottom bearing
- Used on various Robot Coupe models such s R2 (Old Style), R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra
-
-
BOWL LID with SEAL
Part No. PD1909410
$205.14- Bowl Lid
- Comes with gray rubber gasket
- New style
- Plastic
- Clear
- Has funnel shaped hole in top
- Commonly used on various Robot Coupe models such as R4N, R4Y, R500, R502 Series E, R502F, R502Y, R6, R6X, R6VN, R6Y Series A, R602V, Blixer 4, Blixer 5, Blixer 6, Blixer 6V, BX4, BX6, RSI BX4V,R 602, R4, R4N SERIES D, R602, R602E, R602V, R602V E, R602Y, R6V, R6VN, WCO250, WCO250C and only where part is applicable.
When using for model R502Y Series E with serial numbers starting with 539 and ending with 03.
-
Control Relay DPST 110V
Part No. PD37646
$79.32- Power Relay
- DPST
- 25A
- 277 V AC
- Used on various Robot Coupe models such as Blixer 3, Blixer 5V, Blixer 6V, R 602, R302, R302V, R4X, R4Y, R602V, R602V E, R602Y, R6V, R6VN, R6VN-D, R6Y and only where part is applicable.
-
-
-
FOOT FOR BASE
Part No. PD27526
$8.25- Foot
- Rubber
- Length 1 Inch
- Width 1 Inch
- Height 1.25 Inch
- Used on various Robot Coupe models such as Blixer 5V, Blixer 6V, R4N, R4X, R4Y, R6N, R6VN, R6X, R6Y ,R602, R4, R4N SERIES D, R6, R6V, R6VN and only where part is applicable.
Best practice is to change all 4 to ensure proper balance and safety of machine. This will also maintain the air movement needed under the machine. This preservers safety of the motor (around 500.00 +) from overheating and failing.
-
-
-
LID SEAL GASKET
Part No. PD2574410
$60.15- Lid Seal Gasket
- Gray
- Rubber
- Commonly used on various Robot Coupe models such as Blixer 4, Blixer 4V, Blixer 5, Blixer 5V, Blixer 6, Blixer 6V, R4N Series A/D, R4B Series A/D, R4Y Series A, R6B Series A/D, R6N Series A/D, R6VB Series A/D, R6Y Series A, R6VN Series A/D, R502, R602 and only where part is applicable.
-
Magnetic Switch w/Hse (single)
Part No. PD162893
$67.66- Magnetic Switch W/Housing
- 2 Wire Lead
- Commonly used on Robot Coupe models such as BX4V, Blixer 5V, R4X, R4Y, R502X, R502Y, R602Y, R6X, R6Y and where part is applicable.
-
-
-
MOTOR SHAFT PIN, NEW STYLE
Part No. PD1953650
$28.53- Motor Shaft Pin
- New style
- Metal
- Commonly used on Robot Coupe models: Blixer 5V, Blixer 6V, R4N, R4N - 160AE92, R4N SERIES D, R4X, R4Y, R502E, R502X, R502Y, R602, R602E, R602V, R602V E, R602Y, R6N, R6V, R6VN, R6X, R6Y ad where applicable.
- You must have the pin 'press-fit' into the shaft. You cannot use a hammer to set the pin.
- Non-returnable
-
MOTOR SHAFT SEAL
Part No. PD28648
$34.55- Motor Shaft Seal
- Used on various Robot Coupe models such asBlixer 5V, Blixer 6V, R 602, R4, R4N, R4N SERIES D, R4Y, R6, R602, R602E, R602V, R602V E, R602Y, R6N, R6V, R6VN, R6VN-D, R6Y and only where part is applicable.
-
Motor Support
Part No. PD162253
$1,058.07- Commonly used on Robot Coupe models: R4N Series A, R4N Series D, R6N Series A, R6N Series D, R6VN Series A, R6VN Series D, R4C Series A, R4C Series D, R4X Series A, R4X Series D, R6C Series A, R6C Series D, R6VC Series A, R6VC Series D, R6X Series
-
NUT, BOWL
Part No. PD1909710
$38.34- Rod Bold
- for on/off Pin assembly
- Used on various Robot Coupe models such as Blixer 5V, Blixer 6V, R 602, R4, R4N SERIES D, R6, R602, R602E, R602V, R602V E, R602Y, R6V, R6VN and only where part is applicable.
-
PIN, BOWL, ON/OFF, 4-5/8"
Part No. PD2564510
$23.06- Pin Only
- Mounts on side of cutting bowl
- Length 4-5/8"
- Commonly used various Robot Coupe models such as R4Series bowls, Blixer 5V, R4N, R4Y, R502E, R502Y and only where part is applicable.
-
Plate, Motor Mounting, Each
Part No. PD162689
$34.44- Motor Mounting Plate
- Metal
- Sold as each
- (4 total)
- Commonly used on Robot Coupe models: R4N Series A, R4N Series D, R6N Series A, R6N Series D, R6VN Series A, R6VN Series D, R4C Series A, R4C Series D, R4X Series A, R4X Series D, R6C Series A, R6C Series D, R6VC Series A, R6VC Series D, R6X Series and where part is available.
-
Robo-Cart *
Part No. PD162147
$636.68- Commonly used on Robot Coupe models: R4, R4N Series A, R4N Series D, R6 Series (R6N, R6B, R6C), R6N Series A, R6N Series D, R6V Series (R6VN, R6VB, R6VC), R6VN Series A, R6VN Series D, R4C, R4C Series A, R4C Series D, R4X, R4X Series A, R4X Series
-
S BLADE ASSY, R4, R5 SERIES
Part No. PD3056810
$331.28- "S" Blade
- Assembly
- Straight Edge
- For models R4N Series, R4N - 160AE92, R4N SERIES D, R4Y, R4Y Series A (units with buttons on front), R502E, R502Y.
-
Seal Support Assy
Part No. PD36175
$208.48- Use on various Robot Coupe models such as: Blixer 5V, Blixer 6V, R4N, R4X, R4Y, R6N, R6VN, R6X, R6Y, and where part is applicable
-
SEAL, MOTOR SUPPORT
Part No. PD2864720
$29.08- Motor Seal
- 1-3/8" outer x 1" inner x 1/4"
- Used on various Robot Coupe models such as Blixer 5V, BLIXER 6V, R10, R10E, R10P, R10U, R18, R4N, R4X, R4Y, R502E, R502X, R502Y, R602E, R602V E, R602Y, R6N, R6V, R6VN, R6X, R6Y, R8, R8U and only where part is applicable.
-
Serrated Blade Assy
Part No. PD162655
$393.46- S Blade
- Straight blade
- Commonly used on Robot Coupe models: R4N Series A, R4N - 160AE92, R4N Series D, R4B Series A, R4B Series D , R4Y Series A, R202E, R502Y.
-
SPRING, BOWL
Part No. PD1909810
$5.43- Spring for on/off pin on bowl
- 1-3/4"
- Commonly used on various Robot Coupe models such asBlixer 3, R 602, R4, R4N SERIES D, R6, R602, R602E, R602V, R602V E, R602Y, R6V, R6VN and only where part is applicable.
-
STRAIN RELIEF
Part No. PD50033
$24.28- Strain Relief
- Used on various Robot Coupe models such as: Blixer 5V, Blixer 6V, R302, R302V, R4N, R4X, R4Y, R502E, R502X, R502Y, R602E, R602V E, R602Y, R6N, R6VN, R6X, R6Y, R8, R8U.
-
SUPPORT PAD - REAR
Part No. PD3522610
$61.32- Rear Support Pad
- Commonly used on Robot Coupe models: Blixer 5V, Blixer 6V, R4N, R4N - 160AE92, R4N SERIES D, R4X, R4Y, R502E, R502X, R502Y, R602, R602E, R602V, R602V E, R602Y, R6N, R6V, R6VN, R6X, R6Ywhere applicable
-
-
SUPPORT/PAD, FRONT
Part No. PD2708910
$9.95- Support Pad
- Front
- Commonly used on various Robot Coupe models such as Blixer 5V, BLIXER 6V, R4N, R4X, R4Y, R502E, R502X, R502Y, R602E, R602V E, R602Y, R6N, R6V, R6VN, R6X, R6Y,R 602, R4, R4N SERIES D, R6, R602, R602V and where part is applicable.
-
SWITCH KNOB ASSEMBLY, FLAT GREEN, START
Part No. PD1909310
$98.22- Green On Switch Assembly
- Used on various Robot Coupe models such as Blixer 5V, Blixer 6V, R4N, R4X, R4Y, R6N, R6VN, R6X, R6Y and only where part is applicable.
-
SWITCH KNOB ASSEMBLY, FLAT RED, STOP
Part No. PD2711610
$98.22- Off Switch
- Red
- Used on various Robot Coupe models such as Blixer 6, CL-60E V.V., R 602, R4, R4N SERIES D, R6, R602, R602E, R602V, R602V E, R602Y, R6V, R6VN and only where part is applicable.