R4X Series D
-
BASE BOLT WITH WASHER
Part No. PD20526
$8.13- Used on various Robot Coupe models such as R4X and where part is applicable.
-
Base, Metal
Part No. PD162042
$579.41- Used on various Robot Coupe models, such as: R4N Series A, R4N Series D, R6N Series A, R6N Series D, R6VN Series A, R6VN Series D, R4C Series A, R4C Series D, R4X Series A, R4X Series D, R6C Series A, R6C Series D, R6VC Series A, R6VC Series D, R6X Series, and where part is applicable.
- NOT USED FOR THE R6X Series D
- Used on various Robot Coupe models, such as: R4N Series A, R4N Series D, R6N Series A, R6N Series D, R6VN Series A, R6VN Series D, R4C Series A, R4C Series D, R4X Series A, R4X Series D, R6C Series A, R6C Series D, R6VC Series A, R6VC Series D, R6X Series, and where part is applicable.
-
BEARING, MOTOR TOP BEARING
Part No. PD30687
$55.04- Motor Top Bearing
- Used on various Robot Coupe models such as Blixer 5V, Blixer 6V, R4N, R4X, R4Y, R6N, R6VN, R6X, R6Y, R8, R8U and only where part is applicable.
-
BEARING, TOP OR BOTTOM, SEALED 6204
Part No. PD1100950
$62.84- (For the A O Smith motors only). Sealed Bearing
- 1-9/16 diameter x 11/16 x 7/16"
- Top or bottom bearing
- Used on various Robot Coupe models such s R2 (Old Style), R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra
-
Continuous Feed Kit
Part No. PD162696
$1,272.67- Continues Feed Kit
- Commonly used on Robot Coupe models such as R4N Series D, R4C Series D and R4X Series D and where part is applicable.
-
CONTINUOUS FEED LID
Part No. PD19090
$199.15- continuous feed Lead
- Does not include pushers
- Comes with latch and magnet
- Gray Plastic
- Used on various Robot Coupe models such as R4, R4N, R4N SERIES D, R4X and only where part is applicable.
-
CONTINUOUS LEAD LEAD
Part No. PD38069
$985.53- For R4N & R4X Series D only
- Includes continuous lead lid, locking pin assembly, locking collar, pin for latch, hinge pin bushing.
-
Control Relay DPST 110V
Part No. PD37646
$79.32- Power Relay
- DPST
- 25A
- 277 V AC
- Used on various Robot Coupe models such as Blixer 3, Blixer 5V, Blixer 6V, R 602, R302, R302V, R4X, R4Y, R602V, R602V E, R602Y, R6V, R6VN, R6VN-D, R6Y and only where part is applicable.
-
-
DISC-PLATE STORAGE RACK
Part No. PD1942050
$32.50- Storage Rack
- Metal
- Epoxy coating
- Holds up to 8 food processor discs
- 4 1/2" x 13 1/4" x 2 1/2"
- Prevent blades from hitting each other while in a storage drawer. Protects blade edge.
- Prevent employees from cutting themselves when handling these sharp blades.
- Used on various Robot Coupe models such as CL 30, CL 50, CL 55 Pusher, CL 60 Bulk, CL 60 Pusher, Food Processor, R 100, R 100 Plus, R 300, R 301 Ultra, R100, R100 PLUS, R101, R101 Plus CB, R2 Ultra Dice, R2N, R2N Ultra, R2N-ULTRA, R301 ULTRA, R301 Ultra Dice, R301U, R302, R302V, R4, R401A, R402 V. A, R402A, R4N, R4N SERIES D, R4X, R6, R602, R602E, R6N, R6V, R6VN, R6VN-D, R6X and only where part is applicable.
-
DISCHARGE PLATE (K)
Part No. PD3209710
$44.14- Discharge Plate
- 7-5/16" Outer Diameter
- 3/4" Inner Diameter
- Black
- Commonly used on various Robot Coupe models such as CL-50 Series D, CL-52D , CL-55D, CL-60 Series D, R502E, R502X ,CL-50, CL50, CL50E, CL52, CL55, CL60, R4N, R4X, R6N, R6VN, R6X, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL-52, CL-55, CL-60, CL-60E, CL-60E V.V., R4N, R4X, R502E, R502X, R602E, R6V and only where part is applicable.
- NOTE: Please provide serial number of unit to insure part is correct.
-
-
FOOT FOR BASE
Part No. PD27526
$8.25- Foot
- Rubber
- Length 1 Inch
- Width 1 Inch
- Height 1.25 Inch
- Used on various Robot Coupe models such as Blixer 5V, Blixer 6V, R4N, R4X, R4Y, R6N, R6VN, R6X, R6Y ,R602, R4, R4N SERIES D, R6, R6V, R6VN and only where part is applicable.
Best practice is to change all 4 to ensure proper balance and safety of machine. This will also maintain the air movement needed under the machine. This preservers safety of the motor (around 500.00 +) from overheating and failing.
-
-
-
HINGE PIN BUSHINGS (Pair)
Part No. PD1637110
$12.58- Hinge Pin Bushing
- Sold as a pair
- Used on models such as CL50, CL52, CL55, CL60, R4N, R4X, R502E, R502X, R602E, R6N, R6V, R6VN, R6X
-
HINGE PIN, LID
Part No. PD1637010
$47.50- Hinge Lid Pin
- Dimensions are 10-3/8" X 2-1/2"
- Used on various Robot Coupe models such as R6 Series A & D, R6C, R6N, R6V, R6VN, R6X ONLY, CL30, CL50, CL50E, CL50 Gorurmet, CL50 Ultra E, CL52, CL52 Series D, CL55 Pusher, CL55 Pusher Series D, CL 55 Bulk, CL55 Bulk Series D, CL60 Pusher, CL60 Pusher Series D, CL60 Bulk, R502E, R502X, R602E and where part is applicable .
-
LARGE PUSHER, HALF MOON SHAPED
Part No. PD19091
$64.37- Large Pusher
- Half moon shaped (not kidney shaped)
- New Style only, unit has push buttons not toggle switches
- (Round small pusher not included).
- Used on various Robot Coupe models such as R4N Series D, R4N Series A, R4X Series D, R4X Series A, R4P, R4S, R4XR4C, R4, R4N and only where part is applicable.
-
LATCH
Part No. PD25895
$10.90- Lid hook
- Length 2.62"
- Width 1.24"
- Height 1.88"
- Used on various Robot Coupe models such as R4, R4N, R4X, R4N SERIES D and only where part is applicable.
-
Locking Collar (D)
Part No. PD162405
$50.42- Commonly used on Robot Coupe models: R4N Series D, R6N Series D, R6VN Series D, R4C Series D, R4X Series D, R6C Series D, R6VC Series D and R6X Series D
-
-
Magnetic Switch w/Hse (single)
Part No. PD162893
$67.66- Magnetic Switch W/Housing
- 2 Wire Lead
- Commonly used on Robot Coupe models such as BX4V, Blixer 5V, R4X, R4Y, R502X, R502Y, R602Y, R6X, R6Y and where part is applicable.
-
-
MOTOR SHAFT PIN, NEW STYLE
Part No. PD1953650
$28.53- Motor Shaft Pin
- New style
- Metal
- Commonly used on Robot Coupe models: Blixer 5V, Blixer 6V, R4N, R4N - 160AE92, R4N SERIES D, R4X, R4Y, R502E, R502X, R502Y, R602, R602E, R602V, R602V E, R602Y, R6N, R6V, R6VN, R6X, R6Y ad where applicable.
- You must have the pin 'press-fit' into the shaft. You cannot use a hammer to set the pin.
- Non-returnable
-
MOTOR SHAFT SEAL
Part No. PD28648
$34.55- Motor Shaft Seal
- Used on various Robot Coupe models such asBlixer 5V, Blixer 6V, R 602, R4, R4N, R4N SERIES D, R4Y, R6, R602, R602E, R602V, R602V E, R602Y, R6N, R6V, R6VN, R6VN-D, R6Y and only where part is applicable.
-
Motor Support
Part No. PD162253
$1,058.07- Commonly used on Robot Coupe models: R4N Series A, R4N Series D, R6N Series A, R6N Series D, R6VN Series A, R6VN Series D, R4C Series A, R4C Series D, R4X Series A, R4X Series D, R6C Series A, R6C Series D, R6VC Series A, R6VC Series D, R6X Series
-
MOTOR, LOW PROFILE FOR PLASTIC BASE
Part No. PD20458
$626.49- Motor
- Low Profile
- Commonly used on various Robot Coupe models such as R4X, R6X and where part is applicable.
-
-
Plate, Motor Mounting, Each
Part No. PD162689
$34.44- Motor Mounting Plate
- Metal
- Sold as each
- (4 total)
- Commonly used on Robot Coupe models: R4N Series A, R4N Series D, R6N Series A, R6N Series D, R6VN Series A, R6VN Series D, R4C Series A, R4C Series D, R4X Series A, R4X Series D, R6C Series A, R6C Series D, R6VC Series A, R6VC Series D, R6X Series and where part is available.
-
Robo-Cart *
Part No. PD162147
$636.68- Commonly used on Robot Coupe models: R4, R4N Series A, R4N Series D, R6 Series (R6N, R6B, R6C), R6N Series A, R6N Series D, R6V Series (R6VN, R6VB, R6VC), R6VN Series A, R6VN Series D, R4C, R4C Series A, R4C Series D, R4X, R4X Series A, R4X Series
-
ROUND SMALL PUSHER
Part No. PD1909210
$38.92- For Models R4N Series D, R4N Series A, R4X Series D, R4X Series A, R4P, R4S, R4XR4C, R4, R4N
- NEW STYLE ONLY, unit has push buttons not switches
-
-
Seal Support Assy
Part No. PD36175
$208.48- Use on various Robot Coupe models such as: Blixer 5V, Blixer 6V, R4N, R4X, R4Y, R6N, R6VN, R6X, R6Y, and where part is applicable
-
SEAL, MOTOR SUPPORT
Part No. PD2864720
$29.08- Motor Seal
- 1-3/8" outer x 1" inner x 1/4"
- Used on various Robot Coupe models such as Blixer 5V, BLIXER 6V, R10, R10E, R10P, R10U, R18, R4N, R4X, R4Y, R502E, R502X, R502Y, R602E, R602V E, R602Y, R6N, R6V, R6VN, R6X, R6Y, R8, R8U and only where part is applicable.
-
-
STRAIN RELIEF
Part No. PD50033
$24.28- Strain Relief
- Used on various Robot Coupe models such as: Blixer 5V, Blixer 6V, R302, R302V, R4N, R4X, R4Y, R502E, R502X, R502Y, R602E, R602V E, R602Y, R6N, R6VN, R6X, R6Y, R8, R8U.
-
SUPPORT PAD - REAR
Part No. PD3522610
$61.32- Rear Support Pad
- Commonly used on Robot Coupe models: Blixer 5V, Blixer 6V, R4N, R4N - 160AE92, R4N SERIES D, R4X, R4Y, R502E, R502X, R502Y, R602, R602E, R602V, R602V E, R602Y, R6N, R6V, R6VN, R6X, R6Ywhere applicable
-
-
SUPPORT/PAD, FRONT
Part No. PD2708910
$9.95- Support Pad
- Front
- Commonly used on various Robot Coupe models such as Blixer 5V, BLIXER 6V, R4N, R4X, R4Y, R502E, R502X, R502Y, R602E, R602V E, R602Y, R6N, R6V, R6VN, R6X, R6Y,R 602, R4, R4N SERIES D, R6, R602, R602V and where part is applicable.
-
SWITCH KNOB ASSEMBLY, FLAT GREEN, START
Part No. PD1909310
$98.22- Green On Switch Assembly
- Used on various Robot Coupe models such as Blixer 5V, Blixer 6V, R4N, R4X, R4Y, R6N, R6VN, R6X, R6Y and only where part is applicable.
-
SWITCH KNOB ASSEMBLY, FLAT RED, STOP
Part No. PD2711610
$98.22- Off Switch
- Red
- Used on various Robot Coupe models such as Blixer 6, CL-60E V.V., R 602, R4, R4N SERIES D, R6, R602, R602E, R602V, R602V E, R602Y, R6V, R6VN and only where part is applicable.